Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining of Structural Aircraft Plates

Active

Federal

Response Deadline08/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the fabrication of eleven structural aircraft plates from aluminum alloy in strict compliance with military specifications, encompassing precision CNC machining, thermal heat treatment, rigorous dimensional inspection, and final surface finishing to ensure performance and integrity under operational conditions. All work must adhere to established aerospace standards, with quality control processes integrated throughout each manufacturing stage to guarantee conformance and reliability for critical airframe applications. This is a total small business set-aside subcontract under the SBA program, specifically designated for businesses qualifying as small entities per FAR 19.5, with the NAICS code 332812 identifying the industry as Forging and Stamping. The opportunity was posted on August 4, 2026, with responses due by August 18, 2026, and the contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, but all work is expected to be completed by a qualified small business contractor and delivered in accordance with the defined technical and compliance requirements.

General Info

Small business set-aside for eleven precision-machined aluminum aircraft plates per military specs.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabrication of 11 structural aircraft plates from aluminum alloy per military specifications, including CNC machining, heat treatment, dimensional inspection, and surface finishing.

Similar Contracts

Same NAICS industry code

Surface Treatment and Coating ServicesThe contract pertains to surface treatment and coating services for aluminum components requiring oxygen-compatible durability, specifying the application of anodizing, chemical film, and plating processes in strict compliance with MIL-A-8625, QQ-A-601F, and MIL STD 453 standards. These military specifications ensure the coatings provide the necessary corrosion resistance, electrical insulation, and material integrity under high-oxygen environments, critical for aerospace and defense applications. The work is to be performed at Tinker Air Force Base, Oklahoma, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. This is a subcontract opportunity under NAICS code 332812, falling under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, indicating it targets specialized providers capable of meeting exacting military surface treatment requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

Phosphate Coating ApplicationThe contract requires the surface treatment of machined charger housing components through phosphate coating, compliant with military specifications and RQ036 certification standards. This subcontract is focused on precision finishing to ensure durability, corrosion resistance, and adherence to defense-grade performance criteria for components used in critical military applications. The work must be performed at the designated place of performance in Tracy, California, with strict quality control to meet the technical and procedural demands of the Department of Defense. The opportunity is listed under NAICS code 332812, indicating it falls within the metal coating, engraving, and allied services sector, and was posted on August 5, 2026, with a response deadline of August 17, 2026. The agency responsible is LSO Combat Vehicles and Armament under the Department of Defense, emphasizing the defense-critical nature of the components. Subcontractors must be prepared to demonstrate compliance with military specifications and RQ036 certification, ensuring that the phosphate coating process meets exacting standards for military hardware integration.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 21 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract solicits the application of phosphate coating to meet RQ036 specifications for corrosion resistance and surface preparation, encompassing the full process from pre-treatment through coating application to post-process inspection. This subcontract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 332812, indicating it pertains to plating and coating services. Performance is mandated at the designated location in Texarkana, Texas, with a zip code of 75507-5000, and the solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026. The contracting activity is under the Department of Defense through the Land Supplier Operations Vehicle Support office, though specific point of contact details are not provided. All work must adhere strictly to the technical requirements of RQ036 to ensure consistent quality and performance standards.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 21 hours ago

DEADLINE

Cadmium Plating and Surface Finishing ServicesThe contract calls for cadmium plating of steel pipe elbows, encompassing all necessary surface preparation steps including pre-treatment, electroplating with cadmium, passivation to enhance durability, and rigorous quality testing to ensure compliance with military corrosion resistance standards. All work must adhere strictly to specifications governing material integrity, coating thickness, adhesion, and performance under environmental stress conditions, ensuring the finished components meet the demanding requirements of defense applications. The production is to be performed at a designated facility in Tracy, California, with a zip code of 95304-5000, and the work is classified as a subcontract under the NAICS code 332812 for metal coating services. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the Fluid Handling Division under the Department of Defense. While no set-aside status or point of contact is specified, the procurement is issued through the Defense Logistics Agency’s DIBBS platform, indicating formal federal procurement procedures and a requirement for bidders to comply with all applicable military and industrial standards. The emphasis on cadmium plating implies a critical application where corrosion resistance is vital to operational reliability, and contractors must demonstrate proven capability in meeting the exacting technical and compliance thresholds for defense-grade surface finishes.

FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4014

The contract involves the procurement of an anode for plating with the NSN 3426-01-490-3318 under solicitation SPE8E6-26-T-4014, with a required delivery of 17 units to be shipped FOB origin within 167 days from the contract award. The supplier, AQUA-CHEM, INC., must comply with all DLA packaging requirements as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging codes and containment methods, with no special marking required. The item must be packed in units of 10 per intermediate container, with a total of 99 units per pallet, and palletized according to DLA standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware unless specifically exempted for functional uses such as batteries or sensors as defined by NAVSEA, and any portable devices containing mercury must include a secondary containment and be shock-proof per NAVSEA 5100-003D. The contract enforces zero tolerance for quantity variance, with inspection and acceptance occurring at the destination. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for December 19, 2026, and a needed ship date of February 1, 2027. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Pricing is fixed at $17.00 per unit, and all transportation and shipping logistics must adhere to DLAD Proc Note C19 and C20.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

Thermion feeder assembly

Solicitation # W911S226U3935

The Thermion 71000-4.8 VS Feeder Assembly is a high-performance component engineered for the Precision Arc 4.8 Twin Wire Arc Spray System, designed to deliver ultra-high deposition rates using 3/16 inch diameter spray wires such as zinc, aluminum, and zinc-aluminum alloys, with output capability up to 190 lbs. per hour. Built for rugged industrial and field applications, it features modular plug-and-play construction with uniquely keyed fittings to prevent misconnections, detachable portability for use in tight spaces as small as 24 inches, and heavy-duty, high-temperature components to endure harsh operating conditions. Its ergonomic handle and non-latching dead-man trigger enhance operator safety and reduce fatigue, while integrated self-adjusting wire straighteners eliminate helix and kinks, ensuring consistent feed to the spray head. The assembly integrates VS Technology, an automated arc voltage drive system that dynamically adjusts wire feed speed to maintain a stable arc, prevent shorting, and eliminate coating defects from sputtering. A sealed roller bearing lubricating system minimizes friction and eliminates dry-binding, while remote-mounted amperage and voltage controls allow real-time adjustments without returning to the main power unit. It is specifically matched to a 650 Amp, 100% duty cycle power supply and compatible Thermion control boxes, and requires 90-110 psi air at 60 cfm via a 1/2 inch IPS/NPT connection for optimal atomization. Change-over kits support multiple wire diameters including 1/8 inch, 3/32 inch, 2mm, and 1/16 inch, offering operational flexibility. This item is procured under solicitation W911S226U3935 by the U.S. Department of Defense through Fort Drum, NY, with a small business set-aside, and responses are due by August 13, 2026.

W6QM Micc-Ft Drum

POSTED

DEADLINE

Precision Metal Identification Plate ManufacturingA single military specification identification plate is being manufactured under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense, with a NAICS code of 332812 for other metal product manufacturing. The plate must comply with stringent military standards including MIL-STD-129 marking requirements, and the contractor must provide full material certification to verify compliance with authorized specifications. Hazardous materials documentation must accompany the shipment to ensure regulatory adherence throughout the supply chain. The item is to be delivered to a military postal address in FPO with ZIP code 96310-7161, and responses are due by August 17, 2026, following a posting date of August 4, 2026. The contract emphasizes precise adherence to technical, labeling, and safety documentation requirements without deviation.

Defense Logistics Agency

POSTED

DEADLINE

Anodizing and Surface Treatment ServicesThe contract requests Type II sulfuric acid anodizing services for aluminum alloy components to comply with MIL-A-8625 specifications and ensure superior aerospace-grade corrosion resistance. The work involves precise surface treatment processes that meet strict military and industry standards for durability, adhesion, and environmental resilience on critical aircraft and defense system parts. Performance must be executed to consistently deliver high-quality finishes that withstand harsh operational conditions without degradation. The solicitation is classified as a subcontract under NAICS code 332812 and is issued by the Fluid Handling Division within the Department of Defense. The deadline for responses is August 17, 2026, with the contract opportunity posted on August 4, 2026. All work must be performed at the specified location in Columbus, Ohio, with postal code 43217-5872. Interested parties must submit proposals through the designated DIBBS portal before the closing deadline to be considered for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Sandblasting And Powder Coating Services

Solicitation # 2026-1016

The City of Pomona is soliciting qualified local companies for a three-year annual contract to provide sandblasting and powder coating services for its Water Resources Department, with all work to be performed at the vendor’s facility. The primary scope includes abrasive media blasting and powder coating of premanufactured wrought iron panels and gates, sized between 8 feet tall by 4 feet long and 8 feet tall by 20 feet long, with an estimated volume of 200 units. Additional services encompass blasting and coating of fabricated steel items such as square tubing, pipe racks, flat stock, and corrugated steel as needed. All powder coatings must be applied in either semi-gloss black or white. Vendors are required to specify completion lead times for the wrought iron panels and ensure that any miscellaneous items are completed within seven business days. Pricing must be submitted based on linear footage or hourly rates. The solicitation, identified as Bid #2026-1016 with solicitation number 20260803007, was posted on August 4, 2026, with responses due by August 13, 2026. The contract falls under NAICS code 332812 and is open to local businesses through a SLED agency procurement process managed by the City of Pomona, California.

POSTED

DEADLINE

Electroless Nickel Plating & Surface FinishingThe contract requires the application of electroless nickel plating in full compliance with the AMS-2404 specification, encompassing all stages from initial cleaning and surface preparation through to the final plating process, thickness verification, and corrosion resistance testing. Work must be performed to meet stringent aerospace and defense industry standards, ensuring consistent quality and performance under demanding operational conditions. The plating service is critical for enhancing durability, wear resistance, and environmental protection of components used in defense systems. This subcontract is solicited by the Department of Defense under the agency name LAND SUPPLY CHAIN, with the place of performance designated at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, under the NAICS code 332812, which corresponds to metal finishing and coating activities. The contract is intended for qualified vendors capable of delivering precision surface finishing services to support military hardware maintenance and production requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThe contract requires the application of Chemical Agent Resistant Coating (CARC) and high-temperature coatings in strict compliance with military specifications, ensuring durability and protection against chemical threats. The surface finish must meet a maximum roughness of 16 microinches, and all work must adhere to hazardous materials handling protocols to ensure safety and regulatory alignment. This subcontract is part of a Department of Defense initiative managed by LAND SUPPLIER OPNS VEHICLE SPT, with performance required at the facility in New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 332812 identifies the work under metal coating services for military equipment. Submission of proposals is due by August 13, 2026, with the solicitation posted on August 2, 2026, through the DIBBS portal.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Chemical Conversion Coating (MIL-DTL-5541)The contract requires the application of chromate or non-chromate chemical conversion coatings on aluminum components in accordance with MIL-DTL-5541 Class 1A specifications to provide corrosion protection and maintain electrical conductivity. This work is targeted at aluminum parts used in defense applications where surface treatment must meet rigorous military standards for durability, adhesion, and performance under environmental stress. The coating process must ensure consistent quality across all components, with strict adherence to the technical requirements of the specification, including preparation, application, rinsing, drying, and inspection procedures. This is a small business set-aside subcontract under the NAICS code 332812, indicating it is reserved for small businesses in the metal finishing industry. The opportunity is managed by the Department of Defense through the W6QK Lad Contr Office, with performance expected to take place in Chambersburg. Respondents must submit proposals by August 28, 2026, following the solicitation posted on July 31, 2026. The nature of the work demands precise execution, compliance with federal defense standards, and the ability to qualify and validate coating results through established testing protocols to ensure full conformance to MIL-DTL-5541 Class 1A requirements.

W6QK Lad Contr Office

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Export-Controlled Technical Data ManagementThis contract requires the secure management and governance of technical data subject to International Traffic in Arms Regulations and Export Administration Regulations, ensuring full compliance with Defense Federal Acquisition Regulation Supplement clause 252.225-7048 and the US/Canada Joint Certification Program. The subcontractor must implement controls to safeguard sensitive defense-related information, including physical, digital, and procedural safeguards, and maintain strict access limitations to authorized personnel only. Compliance with all applicable export control laws is mandatory throughout the performance period, with documented procedures for handling, storing, transmitting, and destroying controlled technical data. The work is to be performed at Tinker Air Force Base, Oklahoma, under a subcontracting arrangement issued by the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The NAICS code 541690 indicates this pertains to other scientific and technical consulting services, suggesting the subcontractor will provide specialized expertise in export control compliance and data security rather than manufacturing or direct production. Responses are due by August 13, 2026, and the solicitation was posted on August 5, 2026, indicating a short turnaround for qualified vendors to demonstrate capability in meeting stringent regulatory requirements for defense-related technical data.

Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

Packaging, Labeling, and Marking ComplianceThis contract requires full compliance with U.S. military packaging, labeling, and barcoding standards including MIL-STD-2073-1E for protective packaging, MIL-STD-129 for uniform labeling and barcoding of military shipments, and DLA RP001 for defense logistics agency requirements. All items must be properly marked with standardized barcodes and hazard labels where applicable, ensuring safe handling and identification of hazardous materials in accordance with Department of Defense regulations. The work must be performed to support military supply chain operations with exacting precision in documentation, marking, and packaging integrity. The solicitation is classified as a subcontract under NAICS code 561910 for other support services and was posted on August 5, 2026, with a response deadline of August 13, 2026. Performance is designated for Tinker Air Force Base, Oklahoma, 73145-8000, under the oversight of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. All parties must adhere strictly to the specified standards and timelines to meet operational readiness requirements for military logistics.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Precision Machining of Aerospace CouplingsThe contract involves the high-precision machining of aluminum alloy liquid oxygen seat couplings that must meet stringent aerospace industry standards including QQ-A-200/8F for aluminum alloy specifications, MIL-A-8625 for anodic coating requirements, and MIL SPEC 21180D for dimensional and functional performance criteria. The work is classified as a subcontract under NAICS code 332721 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance required at Tinker Air Force Base, Oklahoma, zip code 73145-8000. All deliverables must adhere to exacting quality controls and documentation standards expected for critical aerospace propulsion components, ensuring compatibility and safety in oxygen-rich environments. The solicitation was posted on August 5, 2026, with a mandatory response deadline of August 13, 2026, leaving a narrow window for qualified subcontractors to submit proposals. While no set-aside designation or point of contact information is specified, the location of performance and governing standards indicate this is a specialized procurement targeting experienced contractors with verified capability in high-tolerance machining of aerospace-grade materials. The contract emphasizes technical precision, compliance verification, and supply chain reliability, with all submissions expected to demonstrate proven experience with similar aerospace components and adherence to government-mandated material and surface treatment protocols.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Cybersecurity Compliance and Data SafeguardingThis contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard covered defense information, ensuring compliance with federal cybersecurity standards. Key responsibilities include enforcing access control measures, establishing robust incident reporting protocols, and ensuring that all subcontractors are contractually bound to adhere to the same security requirements through proper flow-down clauses. The scope is focused on protecting sensitive data throughout the supply chain, with continuous monitoring and documentation to validate adherence to the framework. The contract is issued as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, and is tied to the NAICS code 541512, indicating information technology services. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. Performance location and point of contact details are unspecified, but compliance with NIST controls is mandatory regardless of where the work is executed. The contractual obligations extend beyond initial implementation to include sustained operational security, making ongoing assessment and adaptation to evolving threats a core requirement.

Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

Packaging and Labeling of Defense ComponentsThe contract requires the military-compliant packaging and labeling of defense components adhering to DLA RP001 and MIL-STD-129 standards, ensuring all items are properly preserved in a clean and dry condition to maintain integrity during storage and transport. Each package must include accurate barcoding and labeling based on National Stock Numbers to enable seamless tracking and inventory management within the Department of Defense supply chain. The work involves precise application of labeling systems and packaging techniques that meet rigorous military specifications for durability, identification, and compatibility with automated logistics systems. This is a subcontract opportunity under NAICS code 493190, issued by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with a response deadline of August 13, 2026. The solicitation is posted on the DIBBS platform and requires full compliance with federal and military packaging regulations. While the place of performance and point of contact details are not specified, contractors must be prepared to meet all technical and procedural requirements outlined in the referenced standards without deviation. The contract emphasizes strict adherence to protocol, quality control, and documentation to support defense logistics operations.

Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks independent inspection and verification services for bellcrank components to ensure full compliance with MIL-STD-1916 and zero-defect standards, requiring rigorous attribute sampling across critical, major, and minor characteristics. The work is intended to validate that all delivered parts meet stringent military quality requirements through objective, third-party assessment, with failure to conform unacceptable at any level. The scope emphasizes defect prevention and adherence to established military specifications, making quality control and accurate documentation central to performance expectations. This subcontract, classified under NAICS code 541330, is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. There is no specified place of performance or set-aside classification, and the point of contact information is not provided. Interested parties must review the full solicitation via the provided DIBBS link to understand submission requirements, delivery expectations, and any additional technical or administrative conditions tied to performance.

Engineering Services

POSTED

about 21 hours ago

DEADLINE

Precision Machining of Bellcrank Link ComponentThe contract calls for the manufacture of four precision bellcrank link components adhering to rigorous military specifications, encompassing complete CNC machining, heat treatment processes, and final inspection to ensure strict compliance with dimensional tolerances and material requirements. Each component must meet exacting performance and durability standards consistent with defense procurement protocols, ensuring reliability in critical mechanical applications. The work is classified as a subcontract under NAICS code 332721 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense. Bidders must submit responses by August 13, 2026, with the opportunity posted on August 5, 2026, and performance is expected to occur under the oversight of the contracting agency without a specified geographic place of performance.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

Quality Inspection & CertificationThe contract requires third-party inspection and certification of manufactured spacer sleeves to ensure dimensional accuracy, material conformance, and surface finish meet stringent defense quality standards. All inspections must be performed according to specified technical requirements and documented with formal reporting that aligns with Department of Defense quality assurance protocols. The work is classified as a subcontract under NAICS code 541380 and is tied to performance at Tinker Air Force Base, Oklahoma, with the agency responsible being the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Responses are due by August 13, 2026, and all deliverables must be submitted through the designated DIBBS portal to satisfy contractual obligations.

Testing Laboratories and Services

POSTED

about 21 hours ago

DEADLINE

Raw Material Supply for Machined SleeveThe contract requires the supply of certified aerospace or military-grade raw metal material specifically engineered for the precision machining of spacer sleeves, with all material parameters strictly aligned to the technical data package provided. The material must meet rigorous quality standards appropriate for defense and aerospace applications, ensuring dimensional accuracy, mechanical integrity, and traceability through certified documentation. Performance of this work is designated to occur at Tinker Air Force Base, Oklahoma, with the specified delivery location and handling requirements tied to military supply chain protocols. This subcontract, posted on August 5, 2026, with a response deadline of August 13, 2026, falls under NAICS code 331492 for other nonferrous metal rolling, drawing, and extruding, indicating the supplier must possess specialized capabilities in processing nonferrous metals to exacting specifications. The contract is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, suggesting the material will support critical defense systems requiring zero tolerance for deviation. Suppliers must demonstrate proven experience with certified aerospace materials and compliance with military-grade certification standards, as any nonconformance may result in rejection of the entire shipment.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 21 hours ago

DEADLINE

Precision Machining of Spacer Sleeve ComponentThe contract calls for the manufacture of 94 precision-machined spacer sleeve components in accordance with military drawings and specifications, requiring full compliance with stringent quality and dimensional standards. The work encompasses complete production activities including material sourcing, computer numerical control machining, in-process and final inspection, and secure delivery to the designated performance location at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The North American Industry Classification System code 332510 indicates this is a precision machining services contract under the broader category of metal forging and stamping. The solicitation is classified as a subcontract and was posted on August 5, 2026, with a response deadline of August 13, 2026. The procurement is managed by the ASC Supplier Oper AE and AF Division under the Department of Defense, emphasizing the critical nature of the component in defense systems. Although details on set-aside status and point of contact are not provided, the contract requires full adherence to military-grade quality protocols, and all units must be delivered to the specified location in compliance with defense supply chain requirements. Interested parties must respond before the deadline to be considered for award.

Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

Precision Machined Component Supply – Ball Screw Actuator CapThe contract calls for the supply of 15 precision-machined Ball Screw Actuator Caps identified by NSN 1620002444628, manufactured to meet military specifications and compliant with MIL-STD-129 marking standards and hazardous material labeling regulations. Each unit must be produced to exacting technical and quality benchmarks ensuring full compatibility and operational reliability in defense systems. The procurement is structured as a subcontract under NAICS code 332721 and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Proposals must be submitted by August 13, 2026, with the performance location designated as Hill Air Force Base, Utah, 84056-5734. The solicitation was posted on August 5, 2026, and bidders must adhere to all technical, logistical, and compliance requirements outlined in the defense procurement framework.

Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE