Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Manufacturing of Flat Washers (NSN 5310-01-384-0140)

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacturing of 157 critical application flat washers for the DLA Weapons Support ASC Commodities Division under NSN 5310-01-384-0140. The contractor is required to fabricate the components according to Basic Drawing NR 43689 258759, Revision G, utilizing mercury-free materials and precision machining equipment. Quality assurance must adhere to a zero-non-conformance sampling plan in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and hold DLA approval for handling ITAR and EAR data. The project is categorized under NAICS code 332722, with the place of performance located in Tracy, California. The response deadline for this requirement is November 13, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9458.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, FLAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures 157 critical application flat washers for prime contractors on DLA Weapons Support ASC projects. Fabricates washers per Basic Drawing NR 43689 258759, Revision G, using a zero-non-conformance sampling plan per MIL-STD-1916 or ASQ H1331. Requires precision machining equipment and mercury-free materials. Must hold US/Canada Joint Certification Program (JCP) and DLA approval for ITAR/EAR data. Delivers 157 finished flat washers.

Similar Contracts

Same NAICS industry code

Supply of Plain Cap Nuts (NSN 5310-01-3490759)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Shear BoltsThis subcontract involves the manufacture and supply of 20 specialized shear bolts, part number NAS6208-50, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is required to fabricate the bolts according to the current NAS6208-50 part standard, ensure physical identification and bare item marking comply with MIL-STD-130N paragraph 4.1.b(2), and follow ASTM D3951 packaging guidelines. The project falls under NAICS code 332722 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Finned Neck Bolts

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Precision Manufacturing of Close Tolerance Screws (NAS1994C4T)This subcontract involves the precision manufacturing of 633 close tolerance screws for the DLA Weapons Support ASC Commodities Division. The components must be produced via precision machining or cold-heading to meet NSN 5305016005925 and NAS1994C4T specifications, with a strict prohibition on the use of additive manufacturing. All delivered units must be finished, inspected, and marked according to the required standards. To be eligible, the manufacturer must hold SAE AS9003 or ISO 9001 certification and maintain DFARS cybersecurity compliance. The work is associated with NAICS code 332722 and will be performed at Robins Air Force Base. Responses to this requirement are due by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Critical Application Lock Washers (NSN 5310-01-077-9646)This subcontract involves the supply of 28 critical application lock washers, specifically NSN 5310-01-077-9646, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The requirement specifies genuine Curtiss-Wright Electro-Mechanical parts, including part numbers 11172-B-18, B-087D241BX1, and PL-11156-F-18. All components must adhere to strict quality and sampling standards, specifically MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-105/ASQ Z1.4 for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The items are to be delivered FOB Origin to the DLA Distribution center in New Cumberland, Pennsylvania. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Flat Washer / Spacer Ring SupplyThis subcontract involves the manufacture and supply of 916 specialized flat washers and spacer rings for prime contractors supporting the Department of Defense. The components must strictly adhere to the dimensions and material properties specified under National Stock Number 5310013601034. The contract is managed by the DLA Weapons Support ASC Commodities Division and falls under NAICS code 332722. Logistics for the order are coordinated through the First Destination Transportation program, with the place of performance located in Tracy, California. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Manufacture of NAS42 Sleeve SpacersThis subcontract involves the manufacture of 690 precision sleeve spacers, part number NAS42HT4-85, for the Department of Defense under the DLA Weapons Support ASC. The fabrication must strictly adhere to Basic Non Government Standard NAS42 Revision 11 and requires the use of precision machining equipment. All materials used in production must comply with the Buy American Act and the Berry Amendment. To be eligible, the manufacturer must hold certification in either SAE AS9003 or ISO 9001. The project is categorized under NAICS code 332722, with the place of performance located in Jacksonville. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Hose Clamp Supplier (NSN 4730-01-601-8071)This subcontract involves the manufacture or sourcing of 756 finished, packaged, and palletized hose clamps for prime contractors serving the Department of Defense DLA Weapons Support Fluid Handling Division. The required components must feature an open size of 3-1/2 inches and a closed size of 3-3/16 inches, adhering strictly to Basic CID A-A-52506E Revision E and Part Number AA52506-SLTB-74. The supplier must ensure full compliance with MIL-STD-1916, ASTM D3951, and NIST SP 800-171 standards. Performance for this contract is based in New Cumberland, Pennsylvania, under NAICS code 332722. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Tapping Screw Procurement (NSN 5305-00-998-3248)This subcontract involves the procurement of 17 tapping screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing screws that strictly adhere to NSN 5305009983248 and the DLA Master List of Technical and Quality Requirements. Performance will take place at Davis Monthan AFB, with all items required to be packaged according to MIL-STD-129 and ASTM D3951 and palletized per RP001. The contractor must maintain compliance with Buy American regulations and DFARS 252.204-7012 cybersecurity standards. Final delivery requires the submission of invoices and receiving reports through the Wide Area WorkFlow system. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Stamped Steel Nut Fabrication (Unplated)This subcontract involves the fabrication of unplated stamped steel nuts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of industrial stamping presses and custom dies to form steel stock into nut geometry in strict accordance with MS27151C Revision C. Quality assurance is a critical component of the contract, requiring the execution of zero-based sampling plans per MIL-STD-1916 or ASQ H1331 to ensure all delivered components meet precise dimensional specifications. The performance of this contract is centered in Barstow, California, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 6 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

POSTED

about 6 hours ago

DEADLINE

Electrical Power Cable Assembly SupplyThis subcontract involves the supply of two specialized electrical power cable assemblies, specifically NSN 6150015902141 and L3 Technologies part number 60085525+000. The contract supports prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The project falls under NAICS code 334418 and specifies New Cumberland as the place of performance. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-0166-44390)This subcontract involves the supply of two socket head cap screws to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The required fasteners must match NSN 5305-0166-44390 and McMaster-Carr part number 92185A721, with delivery terms set as FOB Origin to Baltimore. The provider must adhere to strict regulatory standards, including MIL-STD-129 for packaging and DFARS 252.223-7008 concerning prohibited materials. Additionally, the contractor is required to maintain cybersecurity compliance in accordance with NIST SP 800-171.

Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing military-grade packaging and marking for 57 units destined for DLA Distribution San Joaquin in Tracy, California. All hardware must be processed in strict accordance with MIL-STD-2073-1E and RP001 for packaging, and MIL-STD-129 for marking. The contractor is required to apply preservation and cushioning materials following Pres Mthd 33 using approved MIL-SPEC materials. Execution of these services requires specialized knowledge of the DLA Master List of Technical and Quality Requirements. This opportunity falls under NAICS code 488410 and is managed by the Department of Defense.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Manufacture of Threaded Pin-Rivets (NSN 5320010955771)This subcontract involves the manufacture of 57 threaded pin-rivets (NSN 5320010955771) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to NAS4450, NAS4444, NAS4445, and SAE AS8879D standards, with a specific prohibition on the use of additive manufacturing. All units must be produced using precision machining equipment and utilize materials that comply with the Buy American Act and the Berry Amendment. Quality assurance requires that inspection and acceptance be performed at the origin in accordance with MIL-STD-1916 or ASQ H1331. The project is categorized under NAICS code 332991, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Machine Bolt Supplier (NSN 5306-01-695-3726)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Precision Setscrew Fabrication (NSN 5305-00-616-2095)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of NSN 5305-01-5546688

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Socket Head Cap Screw Supply (NICU)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015041494)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Socket Head Cap Screw Manufacturing (NAS1189/NAS4002)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS