Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Manufacturing of Self-Locking Nuts

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and supply of 1,000 units of military-spec self-locking nuts, with comprehensive requirements covering precision machining, rigorous inspection protocols, secure packaging, and timely delivery to meet defense standards. All work must adhere to strict military specifications to ensure reliability and performance under operational conditions, and the procurement is being managed under a subcontract structure by the Defense Logistics Agency on behalf of the Department of Defense. The NAICS code 332722 confirms the focus on screw and nut manufacturing, and the contract was posted on July 17, 2026, with performance location and point of contact information not specified. The referenced solicitation identifier links to the official DIBBS portal for award tracking and administrative purposes.

General Info

1,000 military-spec self-locking nuts manufactured and supplied per DLA subcontract under defense standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 1,000 units of military-spec self-locking nuts including precision machining, inspection, packaging, and delivery.

Similar Contracts

Same NAICS industry code

Precision Machining of Aircraft Floor SubcomponentsA subcontract opportunity exists for precision machining of metal or composite subcomponents that will be integrated into the aircraft floor system identified by NSN 1560004389290. The work must adhere to strict aerospace industry tolerances and quality standards to ensure compatibility, durability, and safety in military aviation applications. The solicitation is linked to the Defense Logistics Agency under the Department of Defense and falls under NAICS code 332722, indicating it pertains to machine shops and precision manufacturing services. The contract is posted as a subcontract, though no set-aside categorization or specific award type is specified, and performance location details are not provided. Interested parties must ensure compliance with all technical specifications and quality assurance protocols required for defense aerospace systems, with the opportunity accessible through the DIBBS portal under contract number SPE4A726V0901.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Precision Machining and Fabrication of Threaded Rod EndsThe contract calls for the precision machining and fabrication of threaded rod ends to meet rigorous military specifications, encompassing full-cycle manufacturing processes such as CNC machining, heat treatment, and surface finishing to ensure dimensional accuracy, structural integrity, and operational reliability under extreme conditions. Material traceability is mandatory throughout production to guarantee compliance with defense standards, requiring detailed documentation of raw material sourcing, processing steps, and final inspections for each component. The work is being performed under a subcontract tied to the Department of Defense through the Defense Logistics Agency, with the NAICS code 332722 indicating alignment with forging and stamping operations. All manufacturing must adhere to military-grade quality controls, with performance expected to meet or exceed technical and regulatory benchmarks established for defense applications.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Government First Article Test (FAI) Execution and DocumentationThe contract requires the execution of a full First Article Inspection (FAI) for a threaded rod end, encompassing dimensional inspection, material verification, and process validation to ensure compliance with AS9102 standards. All findings and evidence must be compiled into a complete FAI package that meets the rigorous documentation and reporting requirements set forth by the aerospace and defense industry, ensuring traceability and conformity of the initial production unit. The work is part of a subcontract under the Defense Logistics Agency, specifically tied to the Department of Defense, and must be performed in accordance with the applicable regulatory framework governing defense supply chain integrity. The solicitation is classified under NAICS code 332722, indicating involvement in screw, nut, and bolt manufacturing, and is intended to validate manufacturing processes before full-scale production begins. While specific location details are not provided, the performance requirements are standardized across the defense supply base, and successful submission of the FAI package is mandatory for contract progression. The issuance date of July 17, 2026, indicates this is a future procurement effort requiring timely planning and execution to meet government quality assurance expectations.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Machine Screw Supply – NSN 5305014843051The contract entails the supply and delivery of four machine screws identified by NSN 5305014843051, with full compliance required for packaging, labeling, and traceable shipping to ensure end-to-end accountability. All delivery and documentation must adhere to DFARS regulations, and invoicing must be submitted via WAWF to meet Department of Defense financial and procurement protocols. The contract is classified as a subcontract under NAICS code 332722, associated with the Defense Logistics Agency under the Department of Defense, with the solicitation issued on July 17, 2026, and performance occurring under the contractual terms specified in award SPE7LX26FB605. There is no set-aside designation, and the place of performance and point of contact details are not specified in the provided data.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Precision Machining and Fabrication of ComponentsThe contract awards precision machining and fabrication services for critical metal components used in motor-pump assemblies, including housings, shafts, and brackets, with requirements spanning full machining processes, surface finishing, protective coating, and rigorous inspection protocols to ensure dimensional accuracy and performance integrity. All work must meet stringent defense-grade specifications, with the Defense Logistics Agency acting as the contracting authority under the Department of Defense, and the North American Industry Classification System code 332722 confirms the focus on metal finishing and related manufacturing activities. Performance of the subcontracted tasks will be executed to support national defense hardware production, with no specific geographic limitations indicated for the place of performance, allowing qualified vendors to compete nationally. The solicitation, posted on July 17, 2026, is structured as a subcontract and carries no set-aside designation, meaning it is open to all eligible small and large businesses without preference. The contract identifier SPE4A726P3061 provides the primary reference for tracking and compliance, and all deliverables must align with the technical and quality standards required for military-grade motor-pump systems.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Precision Machined Parts ManufacturingThe contract entails the manufacture of precision machined components including brackets, mounts, and fittings to military specifications, with production strictly adhering to NSN and Part Number requirements as outlined in MIL-STD drawings. All work must meet rigorous defense standards for quality, dimensional accuracy, and material integrity, ensuring full compliance with U.S. Department of Defense operational needs. The subcontract is issued under NAICS code 332722 for machine shops and is managed by the Defense Logistics Agency, indicating its critical role in supporting military supply chains. The contract was posted on July 17, 2026, and is linked to the DIBBS system under contract number SPE7LX22D0068 with delivery order SPE7L126FAU4V. Although no specific location or point of contact is provided, the place of performance and organizational details are tied to the Department of Defense’s broader logistics infrastructure. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors, with performance expectations centered on reliable, high-volume production of mission-critical hardware meeting exacting military standards.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Supply of Spring Tension Washers (NSN 5310-14-414-7491)The contract pertains to the procurement and delivery of ten Spring Tension Washers identified by NSN 5310-14-414-7491, manufactured to meet federal military specifications. Although the original line item was canceled, the contract acknowledges an ongoing or potential recurring requirement for these components, suggesting continued future demand. The procurement falls under the subcontract category and is managed by the Defense Logistics Agency under the Department of Defense, with the NAICS code 332722 indicating the manufacturing classification for spring and wire product production. The award was posted on July 17, 2026, and is accessible via the DIBBS system, though specific delivery location and point of contact details are not provided.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

PIN-RIVETThe contract pertains to the procurement of 514 units of PIN-RIVET with NSN 5320-01-164-1692 under solicitation SPE4A7-26-Q-0846, with a response deadline of July 21, 2026, and a required delivery within 36 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance mandates CMMC Level 2 either through a self-assessment or certified third-party assessment. Packaging must adhere to DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contracting activity is the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Brad Ingram listed as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAGThis contract specifies the procurement of 1,000 self-locking hexagonal nuts identified by NSN 5310-01-358-7622 and part number MS17829Z6C, manufactured in accordance with NASM17829 Revision 2 dated 09/30/2025 and referenced standards NASM25027 Revision 1 and MIL-DTL-32258. All items are classified as critical application components and must comply with stringent technical and quality requirements outlined in the DLA Master List, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. The contract enforces strict prohibitions against the intentional use of mercury or mercury-containing compounds in any hardware or packaging, with limited exceptions for functional applications such as batteries, fluorescent lamps, instruments, and chemical reagents specified by NAVSEA. Portable devices containing mercury must include dual containment and be shockproof as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging guidelines. The contract explicitly prohibits mercury in preservation, packaging, and marking via IP056 and confirms compliance with certificate of conformance procedures unless overridden by a quality assurance letter. Delivery is FOB origin with a 163-day lead time and no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with a required ship date of December 28, 2026, and original delivery deadline of April 28, 2027. All items are to be supplied using the authorized unit of issue, and transportation logistics follow DLA procedural notes C19 and C20. The solicitation, issued under contract SPE7M2-26-T-5458, was posted on July 17, 2026, with a response deadline of July 22, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

BOLT, SHEARThe contract specifies the procurement of 293 units of BOLT, SHEAR with NSN 5306-01-129-0566 under solicitation SPE4A6-26-T-05DZ, with a delivery requirement of 191 days from the award date, to be shipped FOB origin to DLA Distribution Jacksonville at the designated parcel post and freight shipping addresses. The item must comply with strict DLA packaging requirements, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. The contract mandates zero non-conformances in sampling per MIL-STD-1916 or comparable zero-based plans, with verification levels assigned to critical, major, and minor attributes and all attributes treated as major unless otherwise specified. Only approved suppliers—HOWMET GLOBAL FASTENING SYSTEMS INC, SPS TECHNOLOGIES LLC, and HEARTLAND PRECISION FASTENERS INC—are authorized to furnish this part, identified by the same part number ST3M807-3-4 across different manufacturer codes. The item is designated as a critical application item requiring full compliance with configuration change management, source approval documentation, and removal of government identification from non-accepted supplies. All packaging and palletization must follow RP001 and DLA standards, with no variance permitted in quantity—exactly 293 units are required. The contract mandates delivery by January 25, 2027, with inspection and acceptance occurring at destination under DLA’s transportation and shipping protocols.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

BOLT, SHEARThis contract outlines the procurement of 2,632 shear bolts with part number NAS6704U16 and NSN 5306-01-248-9766 under solicitation SPE4A6-26-T-05EM, classified as a critical application item. Delivery is required within 64 days to DLA Distribution Cherry Point in North Carolina, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the delivery destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The item must be palletized according to DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in all stages including preservation, packaging, and labeling. Mercury is prohibited except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. The contract is issued for defense use under DoD unit of issue standards, with a purchase request number of 7017010426 and a response deadline of July 17, 2026.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

RIVET, BLINDThis contract solicits 70 blind rivets (NSN 5320-00-883-9393) under a Firm Fixed Price arrangement with no tolerance for quantity variation, requiring delivery within 19 days after government direction. The item is classified as a commercial item and must comply with the current revision of the non-government standard NASM90353 Revision 4 dated December 19, 2024, with prior revisions for historically manufactured units still acceptable. Inspection and acceptance occur at origin, governed by MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributed quality levels align with critical, major, and minor characteristics as defined by the applicable drawing or specification. The item must be physically marked per RQ017 and packaged in compliance with ASTM D3951 while adhering to the higher-priority DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and palletization following RP001 DLA Packaging Requirements. The contract mandates adherence to cybersecurity standards including CMMC Level 2 self-assessment and prohibits the use of certain telecommunications and software services, including ByteDance-covered applications and equipment prohibited under the Federal Acquisition Supply Chain Security Act. The contractor must comply with FAR and DFARS clauses related to equal opportunity, labor rights, trafficking prevention, environmental restrictions including hexavalent chromium and fluorinated foams, and supply chain traceability. Payment is processed exclusively via WAWF, and the delivery destination is DLA’s New Cumberland Facility in Pennsylvania. Past performance, particularly SPRS assessments, carries the most weight in evaluation, followed by delivery schedule compliance and pricing, with award based on a trade-off approach rather than LPTA. The contract incorporates additional requirements for DPAS prioritization, whistleblower protections, and prohibitions on confidential internal agreements, and requires current representations in SAM.gov including UEI, CAGE code, and socioeconomic status.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Non-Rechargeable Battery SupplyThe contract is for the supply of one non-rechargeable battery identified by NSN 6135008357210, procured as a commercial off-the-shelf item with no integration, installation, or additional services required. The item falls under NAICS code 335911 and is being acquired under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 17, 2026, and the contract reference is linked to award SPE7M117D0001 with delivery order SPE7LX26F72P1. No specific location, point of contact, or set-aside classification is provided, indicating a straightforward procurement of a standard military battery component without geographic or contractual restrictions beyond the standard DLA processes.

Storage Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Technical Reporting & Data ManagementThe contract under the title Technical Reporting & Data Management involves the provision of formal test reports, comprehensive data analysis, and quality assurance reviews aligned with military or ASTM standards, ensuring all deliverables meet stringent governmental technical requirements. All results must be securely transmitted to government authorities using authorized systems such as WAWF, guaranteeing compliance with defense data handling protocols and confidentiality standards. The work is performed under a subcontract and falls under NAICS code 541620, classifying it within scientific and technical consulting services, with the Defense Logistics Agency acting as the contracting entity under the Department of Defense. The performance location and specific office details are not specified, but the deliverables are intended for federal defense use and must adhere to official military documentation formats.

Environmental Consulting Services

POSTED

about 16 hours ago

DEADLINE

Cybersecurity Compliance & IT Support for Lab SystemsThe contract requires the implementation and maintenance of cybersecurity controls to safeguard laboratory information systems that handle Covered Defense Information, ensuring full compliance with the Defense Federal Acquisition Regulation Supplement clause 252.204-7012 and the National Institute of Standards and Technology Special Publication 800-171 standards. This includes establishing, monitoring, and continuously improving security measures to protect the confidentiality, integrity, and availability of sensitive defense-related data processed or stored within the lab systems. The scope encompasses both technical and procedural safeguards aligned with NIST 800-171’s 14 families of security requirements, including access control, audit and accountability, risk assessment, and incident response, with ongoing validation to maintain compliance. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 541512 for Computer Systems Design Services. The work is performed to support critical defense infrastructure, requiring strict adherence to federal cybersecurity mandates and continuous oversight to address evolving threats. While the place of performance and point of contact details are unspecified, the contract is active under the award number SPE60322D5003 and linked to delivery order SPE60322FA3D1, indicating its integration within a broader DoD procurement framework. All activities must be documented, tracked, and reported to satisfy federal compliance requirements and ensure the protection of sensitive information across the lab’s IT environment.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Regional Logistics & Sample Handling SupportThe contract entails the end-to-end logistics management of clinical and diagnostic test samples across the UAE and broader Gulf region, including their secure collection from multiple field sites, proper packaging and labeling in compliance with regulatory standards, and timely transportation to a central laboratory located in Sharjah. All activities must maintain strict chain-of-custody protocols to ensure sample integrity and traceability from point of origin to final analysis, with detailed documentation required at every stage of handling. The contractor is responsible for coordinating closely with government entities and regulatory bodies to align with local and regional health and safety directives, ensuring full compliance with applicable laws and operational requirements. This subcontract, classified under NAICS code 484220 for general freight trucking, is issued by the Defense Logistics Agency under the Department of Defense and supports critical medical testing infrastructure across the Gulf. The scope requires reliable, scalable, and secure logistics operations capable of serving diverse geographic locations, with attention to temperature-controlled transport where necessary and real-time tracking capabilities. The contractor must demonstrate proven experience in handling sensitive biological materials, managing complex logistics networks, and interfacing with official stakeholders to facilitate seamless sample delivery and regulatory adherence.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Environmental & Materials Laboratory Testing ServicesThe contract entails the execution of standardized laboratory testing on a variety of materials including soil, water, construction materials, fuels, and chemicals to support defense and infrastructure operations within the Middle East Gulf region. All testing must strictly adhere to military and international standards to ensure data reliability and operational compatibility. The work is performed under a subcontract arrangement with the Defense Logistics Agency operating under the Department of Defense, and it is classified under the NAICS code 541380, which corresponds to other scientific and technical consulting services. The contract was posted on July 17, 2026, with performance activities focused in the Gulf region, though specific location details are not provided. The objective is to deliver precise analytical results that inform decision-making for logistical, environmental, and engineering operations in austere or high-stakes environments.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Subcontract Management & Flow-Down ComplianceThe contract mandates strict compliance with DFARS 252.204-7012 requirements, ensuring that all subcontractors adhere to federal cybersecurity standards for safeguarding covered defense information and implementing adequate security controls. Subcontractors are required to properly flow down these cybersecurity obligations to any lower-tier subcontractors, maintaining an unbroken chain of compliance throughout the supply chain. This obligation applies to all subcontracting activities under the contract, with the Defense Logistics Agency enforcing adherence as part of its broader commitment to protecting sensitive defense data. The contract falls under NAICS code 541611, indicating it relates to management consulting services supporting defense operations, and is governed by the Department of Defense. Although specific performance locations and point of contact details are not provided, the contract is active through the DIBBS platform with a posted date of July 17, 2026, and is structured as a subcontract award. All parties involved must demonstrate ongoing alignment with the cybersecurity framework outlined in DFARS 252.204-7012, including incident reporting, system monitoring, and documentation of protective measures to ensure the integrity and confidentiality of controlled unclassified information.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Cybersecurity Compliance & Incident Reporting SupportThis contract entails providing comprehensive technical and administrative support to ensure adherence to NIST SP 800-171 security requirements, including the implementation and maintenance of controls designed to protect controlled unclassified information. The work involves ongoing assistance with cyber incident reporting procedures, ensuring timely and accurate submission of incident data in accordance with federal guidelines, and maintaining forensic data retention protocols to preserve evidence for investigation and compliance purposes. Support activities are focused on enabling organizational readiness and regulatory compliance within a Department of Defense environment, with emphasis on operational efficiency and data integrity. The contract is classified as a subcontract under NAICS code 541512, associated with the Defense Logistics Agency, and is positioned to fulfill critical cybersecurity infrastructure needs for the broader Department of Defense. Performance is expected to align with federal cybersecurity standards, requiring qualified personnel capable of executing complex compliance tasks, managing incident response workflows, and ensuring forensic data is properly documented, stored, and accessible. The contract was posted on July 17, 2026, and is accessible through the DIBBS system with the provided award and delivery identifiers.

Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

Premium Unleaded Gasoline SupplyThe contract entails the supply of premium unleaded gasoline to U.S. military installations located in Italy, with delivery conducted exclusively via tank truck to ensure secure and efficient transport. Strict fuel segregation protocols must be followed throughout the supply chain to maintain product integrity and prevent contamination, and comprehensive documentation must accompany every delivery to verify compliance with military standards and regulatory requirements. The work is classified as a subcontract under NAICS code 324121, indicating its alignment with petroleum refining and related activities, and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 17, 2026, and performance is expected to occur at U.S. military bases within Italy, though specific locations are not detailed. The contract is not subject to any formal set-aside provisions and is intended to support sustained operational readiness through reliable fuel logistics.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Burner Fuel Oil SupplyThe contract involves the supply of 98,497 liters of Fuel Oil, Burner FS2, to support heating and facility operations at U.S. military installations located in Italy. This is a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 324121, which pertains to petroleum refining. The fuel will be used to ensure continuous and reliable thermal energy for critical infrastructure, maintaining operational readiness in the region. The contract was posted on July 17, 2026, and the performance location is tied to U.S. military facilities in Italy, though specific cities or addresses are not provided. The award is administered through the DIBBS system with the contract identifier SPE60526D9401 and delivery order SPE60526FHRU7, indicating a formalized procurement process under defense logistics channels.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Diesel Fuel Supply – Bulk Storage DeliveryThe contract entails the bulk supply of diesel fuel totaling 502,738 liters, to be delivered via tank truck to designated storage tanks at military installations, with stringent requirements for precise metering and comprehensive documentation at every stage of delivery. The fuel must be transported and dispensed in accordance with military specifications to ensure operational readiness and accountability, with each transaction meticulously tracked and recorded to meet regulatory and logistical standards. The work is performed under a subcontract tied to the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 324121 for petroleum refineries. All deliveries are scheduled to occur at specified military sites with no flexibility in location or timing, ensuring alignment with security and operational protocols. The contract mandates full compliance with handling, safety, and environmental regulations applicable to defense logistics, and any deviations or discrepancies in quantity, quality, or documentation could result in rejection of the delivery or financial penalties. The contract award is accessible through the DIBBS system, reflecting its formal status within DoD procurement channels, and the work is expected to support critical military infrastructure requiring uninterrupted fuel supply.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Diesel Fuel Supply – Trucked DeliveryThe contract entails the supply and delivery of 3,102,538 liters of Diesel Fuel SFD via tank truck to U.S. military installations located in Italy, with delivery terms specified as FOB destination, meaning the supplier assumes all risks and costs until the product reaches the designated military sites. The fuel will be transported under a subcontract, classified under NAICS code 324121, which corresponds to petroleum refineries, indicating the procurement is tied to refined petroleum product distribution. The award is managed by the Defense Logistics Agency under the Department of Defense, reflecting its strategic importance to military operations in Europe. The contract was posted on July 17, 2026, and the delivery location is specifically tied to military facilities in Italy, though exact addresses are not provided. The total volume indicates a large-scale logistical operation requiring coordinated transport, compliance with military fuel standards, and adherence to international shipment regulations for hazardous materials.

Asphalt Paving Mixture and Block Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Machined TEE, FLANGE Component Supply (NSN: 4730-01-499-5965)The contract involves the manufacture and delivery of one precision-machined TEE, FLANGE component with part number 96307-03303-102, designated as a Critical Application Item under stringent aerospace quality standards. This component is identified by the National Stock Number 4730-01-499-5965 and is being procured under a subcontract arrangement to support defense logistics requirements. The work must conform to the highest levels of dimensional accuracy, material integrity, and traceability expected in aerospace and defense applications, ensuring full compliance with relevant technical and regulatory specifications. The contract was posted on July 17, 2026, and falls under the NAICS code 332999 for other fabricated metal product manufacturing. It is managed by the Defense Logistics Agency within the Department of Defense, indicating its importance to national defense supply chains. The place of performance and point of contact details are not specified, but the delivery and quality assurance processes are expected to align with DLA’s procurement protocols. The contract can be referenced through the DIBBS system using the provided UI link, and all manufacturing activities must be completed to meet mission-critical timelines and inspection criteria established for critical aerospace components.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE