Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Manufacturing of Sleeve Bushings (NSN 3120-01-213-8398)

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacturing of 334 finished sleeve bushings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating parts in strict accordance with TDP Rev C Gen 3 and Reference Drawing NR 07482 1282M45 Revision D. All production must adhere to Quality Assurance Plans QAP 13873 QAP-B02 and QAP 07482 MQR-PSD-1, with final delivery requiring packaging compliant with ASTM D3951. To qualify for this engagement, the manufacturer must hold SAE AS9003 or ISO 9001 certification and maintain full compliance with RD003. The work is associated with NSN 3120-01-213-8398 and is performed in Anniston. Interested parties must respond by October 30, 2026.

General Info

Manufacture 334 sleeve bushings per TDP Rev C for DLA by October 30, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6213.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures finished sleeve bushings for prime contractors on DLA Weapons Support ASC contracts. Fabricates parts per TDP Rev C Gen 3 and Reference Drawing NR 07482 1282M45 Revision D using Quality Assurance Plans QAP 13873 QAP-B02 and QAP 07482 MQR-PSD-1. Requires SAE AS9003 or ISO 9001 certification and compliance with RD003. Delivers 334 finished, inspected bushings packaged per ASTM D3951.

Similar Contracts

Same NAICS industry code

Face Plate Assembly ManufacturingThis subcontract for the Defense Logistics Agency involves the precision fabrication and assembly of 121,000 Face Plate Assemblies. The work must be performed in accordance with TDP Rev C Gen 3 and Basic Drawing 81361 806881-05 Rev F, with the place of performance located in Fort Worth, Texas. The scope of work includes the execution of both Contractor First Article Testing and Production Lot Testing to ensure technical compliance. To qualify for this contract, the provider must maintain SAE AS9100 quality systems and hold CMMC Level 2 certification. The project falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) Support

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Bell Tilt Adjustment Assemblies

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Metal Tube Assembly (NSN 4710004110999)This subcontract involves the precision manufacturing of metal tube assemblies under NSN 4710004110999 for the Department of Defense, specifically supporting DLA Weapons Support ASC supply contracts. The scope of work includes precision machining, bending, and assembly conducted in accordance with Bell Textron P/N 212-001-181-001 specifications. Performance will take place in Cherry Point, and all work must utilize calibrated Measuring and Test Equipment per RT001. To qualify, the contractor must maintain ISO 9001:2015 certification and provide a CMMC Level 2 self-assessment. Final deliverables must be fully inspected and packaged according to ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aircraft Armrest Fabrication and Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aircraft Filler Cap Fabrication (NSN 1660015020386)This subcontract involves the manufacture and supply of seven aircraft filler caps, specifically part number 269C860-1 for NSN 1660015020386, to support DLA supply contracts. The components must be produced using precision machining according to strict military specifications, and the use of additive manufacturing is explicitly prohibited. Performance will take place in Tracy, California, under the oversight of the Department of Defense DLA Weapons Support ASC. To qualify, the supplier must maintain SAE AS9003 or ISO 9001 quality systems and provide a CMMC Level 2 self-assessment. All deliverables must adhere to ASTM D3951 packaging standards and MIL-STD-129 labeling requirements. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Housing Assembly, Air Intake (P/N 977077-1)This subcontract involves the manufacture of six Housing Assembly, Air Intake units for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to Honeywell Aerospace US LLC P/N 977077-1 specifications and are designated as Critical Application Items. Performance takes place at Hill AFB and requires strict adherence to zero-based sampling per MIL-STD-1916 or ASQ H1331, as well as bare item marking in accordance with RQ017. The contractor must maintain NIST SP 800-171 compliance to ensure proper data security. This opportunity falls under NAICS code 336413 and is managed by the Department of Defense. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Aircraft Trailing Edge Casting and Initial FormingThis subcontract involves the metal casting and initial shaping of aircraft trailing edge components for prime contractors supporting the DLA Weapons Support ASC. The selected provider will utilize digital Mylar data to execute casting processes and convert them into stable base materials in accordance with ASME Y14.31 standards. The final deliverables consist of rough-cast and initial-machined components produced at industrial foundry facilities. To be eligible, contractors must hold AS9100 certification and maintain strict compliance with ITAR, EAR, and CMMC Level 2 security requirements. The work is associated with NAICS code 336413 and will be performed at Tinker AFB. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Aerospace Structural Support Fabrication (Boeing P/N 74A326100-2002)This subcontract involves the precision fabrication of two structural support components, specifically Boeing part number 74A326100-2002, for the DLA Weapons Support ASC. The project requires the use of precision CNC machining to produce Critical Application Items that strictly adhere to provided engineering drawings. Quality assurance is paramount, with mandatory compliance with MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 sampling plans. To be eligible, contractors must hold ISO 9001:2015 or SAE AS9003 certification and maintain CMMC Level 2 security compliance. The work is categorized under NAICS code 336413 and will be performed in Tracy, California. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Manufacture and Supply of Aerospace Spacer Ring (P/N 214-010-164-1)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Aerospace-Grade Alloy Supply for Pin-Rivet Collars

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Venturi Tube Manufacturer (NSN 6610-01-109-0391)This subcontract involves the manufacture and supply of nine finished Venturi Tubes for prime contractors supporting the DLA Weapons Support ASC Supplier Operator OEM Division. The components must be fabricated according to NSN 6610-01-109-0391 specifications and adhere to DLA requirements RA001, RP001, RQ011, and RQ017. Quality assurance must be performed in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged per ASTM D3951 and MIL-STD-129. The project requires strict adherence to cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336413. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply and Manufacture of Quick Release Pins

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325009340568)

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Electrical Cable Assemblies (NSN 6150-00-368-8640)This subcontract involves the manufacture or sourcing of 20 black specialized electrical power cable assemblies identified by NSN 6150003688640 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict packaging standards per RP001 DLA requirements and adhere to hazardous material labeling regulations under 29 CFR 1910.1200. Additionally, the provider must certify compliance regarding Covered Defense Telecommunications Equipment. The project falls under NAICS code 334418 and is performed in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026. This agreement supports prime contractors in fulfilling broader Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors working with the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging, marking, and palletization of four eye bolts destined for DLA Distribution in Albany, Georgia. All tasks must be executed using military-specification materials and equipment to ensure strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA requirement RP001 for palletization. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 30, 2026, with the performance of services taking place in Albany, Georgia.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Critical Eye BoltsThis subcontract involves the precision CNC machining and fabrication of four critical application eye bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the parts in strict accordance with Basic Drawing NR 80064 2584025 Revision J and Reference Drawing NR OMLM6 2584542 Revision AA. Performance of the contract will take place in Albany. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. Additionally, the provider must adhere to all ITAR and EAR regulations. The response deadline for this requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Industrial Coating and PaintingThis subcontract for Aerospace Industrial Coating and Painting involves providing surface preparation and painting services for prime contractors supporting DLA Weapons Support ASC missile projects. The scope of work requires the application of primer according to SSPC-25 standards with a dry film thickness between 0.0008 and 0.0010 inch, followed by a final topcoat meeting specified TT standards to deliver finished mounting plates. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is October 30, 2026.

Metal Can Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS