Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Manufacturing of Structural Aircraft Brackets

Active

Federal

Response Deadline11/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacturing of structural aircraft brackets, part number 60-5800-1, for prime contractors under DLA supply contracts. The project requires the fabrication of Critical Application Items with extreme dimensional tolerances, specifically grid units within +/- 0.005 inches and +/- 0.007 inches diagonally. To meet these specifications, the provider must utilize high-precision CNC machining or milling equipment capable of maintaining a 0.005 inch tolerance. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with the place of performance located at Tinker AFB. Interested parties must respond by November 10, 2026. The scope of work concludes with the delivery of finished structural brackets that adhere to all stated technical requirements and quality standards.

General Info

Precision manufacturing of structural aircraft brackets for DLA at Tinker AFB by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332710 - Machine Shops

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2634.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

15--BRACKET,STRUCTURAL COM

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures structural aircraft brackets (P/N 60-5800-1) for prime contractors on DLA supply contracts. Fabricates components to extreme dimensional tolerances, including grid units within +/- 0.005" and +/- 0.007" diagonally. Requires high-precision CNC machining or milling equipment capable of holding 0.005" tolerances. Must be capable of producing Critical Application Items. Delivers finished structural brackets meeting all specifications.

Similar Contracts

Same NAICS industry code

Manufacture of NSN 5935-00-355-4739This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the fabrication of 372 units of NSN 5935-00-355-4739. The manufacturer must produce these hardware components in strict accordance with Reference Drawing NR 80064 74210, Revision J, utilizing precision machining equipment to meet 1939 technical drawing specifications and DLA quality standards for the 5935 Federal Supply Class. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710, with the place of performance located in Bremerton, Washington. Interested parties must respond by November 13, 2026, to provide the necessary components for prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

Supply of Ring, Slip, Hand Guard (NSN 1005-00-087-8998)This subcontract through the Department of Defense DDSP New Cumberland Facility requires the procurement of 1,478 units of Ring, Slip, Hand Guard under NSN 1005-00-087-8998. The selected provider must manufacture or source these parts according to strict NSN specifications to support prime contractors delivering DLA Weapons Support contracts. Delivery is handled via FOB Origin, with performance taking place in New Cumberland. Eligible bidders must possess a valid CAGE code and ensure full compliance with defense telecommunications equipment regulations. The opportunity falls under NAICS code 332710, with a response deadline set for November 13, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Supply of Mechanical Drive Housings (NSN 3040016469810)This subcontract opportunity is for the supply of up to 45 precision-manufactured mechanical drive housings, identified by NSN 3040016469810, to support prime contractors under the DLA Weapons Support Strategic Acquisition Program Directorate. The required components must be produced via CNC machining, casting, or precision forging to ensure strict adherence to technical specifications and DLA quality standards. Eligible providers must possess a valid CAGE code to participate. The procurement is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332710. Interested parties must submit their responses by November 17, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Transmission Cover FabricationThis subcontract involves the fabrication of one Transmission Cover, part number 10002486-0102, for prime contractors supporting DLA Weapons Support projects. The work must be performed in accordance with NSN 2520-01-557-0886 and the DLA Master List of Technical and Quality Requirements RA001. Production requires the use of precision CNC milling, turning, and CMM inspection tools to ensure all dimensional specifications are verified. The project falls under NAICS code 332710 and is managed by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament. Strict adherence to the Buy American Act and the Berry Amendment is required for this delivery. The performance location is listed as APO 09321, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of specialized metal tube assemblies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work includes precision machining, cutting, and threading of metal tubes to Class 3 thread standards, specifically adhering to Honeywell P/N 364893-1 to deliver completed assemblies under NSN 4710007644194. Performance will take place in Fort Bliss, Texas. Due to the handling of Covered Defense Information, the contractor is required to possess precision threading equipment and a CMMC Level 2 self-assessment. The project falls under NAICS code 332710 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Shoulder Shaft (NSN 3040016010945)This subcontract involves the manufacture and supply of precision-machined shoulder shafts, identified by NSN 3040016010945, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The project requires the fabrication of parts using CNC lathes and milling machines to meet specific technical requirements set by either Oshkosh Defense LLC PN 24KP270 or Iowa Mold Tooling Co Inc PN 52720821. Performance will take place at Camp Lejeune, with deliverables requiring packaging in accordance with MIL-STD-129 and ASTM D3951 standards. The contractor must ensure strict adherence to several regulatory mandates, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. This opportunity falls under NAICS code 332710 and was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Supply of Shaft Assembly, Shouldered (NSN 3040014386187)This subcontract involves the manufacture or procurement of 215 units of a shouldered shaft assembly, identified as Trivent Engineering part number 3131602 and NSN 3040014386187. The components are intended for prime contractors fulfilling supply contracts for the Department of Defense, specifically under the DLA Weapons Support Strategic Acquisition Program Directorate. All production must strictly adhere to the DLA Master List of Technical and Quality Requirements. Compliance requirements include following MIL-STD-129 for marking and RP001 for palletization. Additionally, the provider must possess Engineering Source Approval and have completed a CMMC Level 2 self-assessment. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026, falling under NAICS code 332710.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Spray NozzlesThis subcontract involves the precision CNC machining and fabrication of 260 fluid-emulsion spray nozzles for the DLA Weapons Support Fluid Handling Division. All parts must be manufactured according to Basic Drawing NR 81361 116-3-162 Revision G and identified by NSN 4730-01-466-9556. The scope of work includes the completion of First Article Testing on 10 units and the provision of a Certificate of Conformance upon delivery of the finished nozzles. To be eligible, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and hold JCP Certification for handling ITAR and EAR data. Additionally, CMMC Level 2 compliance is required. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Supply of Collar PistonsThis subcontract involves the manufacture and supply of nine finished collar pistons for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The pistons must be fabricated to Siemens Energy part number 11043098 using precision CNC machining, with a strict prohibition on the use of additive manufacturing. All work must comply with the DLA Master List of Technical and Quality Requirements and the Buy American Act. The contractor is responsible for packaging and marking all items in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Machining of Shouldered Gear ShaftsThis subcontract involves the precision machining, turning, and grinding of seven shouldered gear shafts, part number RC31407, for the DLA Weapons Support Fluid Handling Division. The work requires the use of CNC lathes and grinders to ensure all components meet strict tolerances for critical application items, with full adherence to RA001 technical and quality requirements. The project is managed under NAICS code 332710 and will be performed at Robins Air Force Base. The final deliverable consists of seven finished, inspected, and certified gear shafts. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision Bore Tube FabricationThis subcontract involves the manufacture of 4,891 precision-machined bore tubes for prime contractors supporting DLA Weapons Support Land projects. Fabrication must strictly adhere to Basic Drawing NR 19200 7266299 and Reference Drawing NR 19200 12579607, utilizing TDP Rev A Gen 1 and MIL-PRF-3150E specifications. All delivered units are required to pass a DCMA source inspection to ensure quality and compliance. To be eligible for this project, contractors must maintain JCP certification, CMMC Level 2, and full ITAR/EAR compliance. The work falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must respond by November 13, 2026, for performance located in zip code 76544.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Precision Fabrication of Angle Brackets (NSN 5340-00-810-7046)This subcontract involves the precision fabrication of 134 angle brackets under NSN 5340-00-810-7046 for the Department of Defense, specifically supporting DLA Weapons Support SMSG Aviation Supply Chain projects. The manufacturer must adhere strictly to Government Design Control Activity specifications and ensure all units are marked, labeled, and packaged in accordance with MIL-STD-129 and ASTM D3951 standards. Performance of this contract requires the provider to hold JCP certification and maintain ITAR/EAR approval. The final deliverable consists of 134 finished and packaged brackets to be associated with operations at Tinker AFB. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Turnlock Fastener ReceptaclesThis subcontract involves the supply of two Turnlock Fastener Receptacles, specifically part BACS22A32, manufactured or sourced according to Basic Drawing NR 81205 BACS22A Revision W. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in San Diego. The provider must adhere to strict technical and regulatory standards, including MIL-STD-129 for marking, RP001 and MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling plans. Additionally, the contract mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards.

Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Aileron Counter Balance ShieldsThis subcontract involves the manufacture and supply of four certified precision-machined aileron counter balance shields for prime contractors supporting DLA Weapons Support supply contracts. The components must be fabricated using aerospace-grade alloys and precision CNC machining in strict accordance with reference drawings 98897 STP51-302 (Rev AJ) and 98897 4J53005/1 (Rev K). All production must adhere to the DLA Master List of Technical and Quality Requirements (RA001). The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 336413, with a response deadline set for November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Export Logistics ProviderThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, requires a provider to perform specialized military packaging and export logistics for prime contractors. The scope of work involves packaging and marking items in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, followed by the coordination of freight shipping and final delivery of components to King Abdullah Air Base in Saudi Arabia. The provider must maintain full compliance with DFARS 252.204-7012 and all applicable ITAR and EAR export regulations. This opportunity falls under NAICS code 488510 and was posted on November 2, 2026, with a response deadline of November 10, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Fanning Strip Manufacturer (NSN 5975-01-35-4738)This subcontract involves the manufacture and delivery of five Fanning Strips for prime contractors supporting DLA Weapons Support ASC projects. The components must be produced according to NSN 5975-01-35-4738 specifications using JCP technical data. To ensure production quality, the manufacturer is required to implement quality management systems compliant with either SAE AS9003 or ISO 9001 standards. The selected provider must hold active ITAR, EAR, and JCP certifications to be eligible for the award. This Department of Defense requirement falls under NAICS code 335999 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging and marking for prime contractors supporting DLA supply contracts. The scope of work includes packaging components according to RP001 standards, performing bare item marking per RQ017, and applying hazard warning labels in compliance with DFARS 252.223-7001. To ensure government shipment readiness, the contractor will utilize industrial etching equipment and military-grade packaging materials to process nozzles. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity was posted on November 2, 2026, with a response deadline of November 10, 2026. It is categorized under NAICS code 493110.

General Warehousing and Storage

POSTED

about 7 hours ago

DEADLINE

Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Grade Material SupplyThis subcontract opportunity, titled Aerospace Grade Material Supply, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division. The contract involves the provision of raw materials and semi-finished components for prime contractors working on aircraft projects. All supplied materials must strictly adhere to specific Boeing specifications, including BMS8-80, BMS8-80V, BAC5004, BAC5300-1, BAC5300-2, BAC5307, and BAC5423, and must be delivered with comprehensive mill test reports. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332999. Performance will take place at Tinker AFB. To ensure regulatory compliance, all materials must meet the requirements of the Buy American Act and the Berry Amendment. The response deadline for this solicitation is November 10, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aircraft HVAC Duct Assembly ManufacturingThis subcontract opportunity is for the fabrication of air conditioning and heating duct assemblies to support DLA Weapons Support ASC aircraft projects. The selected contractor will manufacture assemblies in strict accordance with Reference Drawing NR 13873 012802809-18093 and EI-012802809, ensuring all units are completed and inspected. Compliance with MIL-STD-130 for IUID implementation and ASTM D3951 for packaging is mandatory. The project is a total small business set-aside under NAICS code 336413, with performance taking place at Tinker AFB. Qualified bidders must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval. Responses are due by November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Precision Fabrication of Accumulator AssembliesThis subcontract, titled Precision Fabrication of Accumulator Assemblies, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC. The project requires the precision machining of three Accumulator Assemblies, specifically part number 47614, in accordance with provided technical drawings. The scope of work excludes additive manufacturing and mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, RQ017 for bare item marking, and MIL-STD-2073-1E for packaging and delivery. To be eligible, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 10, 2026, to fulfill the requirements of this specialized fabrication effort under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Military-Grade Textiles for Parachute PocketsThis subcontract involves the supply of military-grade raw textile materials and synthetic fabrics specifically intended for parachute pockets. The materials must strictly adhere to the DLA Master List of Technical and Quality Requirements for NSN 1670-00-988-3093 and be delivered as either certified raw fabric rolls or pre-cut textile kits. To ensure regulatory compliance, all sourced materials must meet the standards set by the Berry Amendment and the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 313320. Performance of the contract will take place at Tinker AFB. The solicitation was posted on November 2, 2026, with a response deadline set for November 10, 2026.

Fabric Coating Mills

POSTED

about 7 hours ago

DEADLINE

Manufacture of Parachute Pack Minimum Survival PocketsThis subcontract involves the full-scale fabrication and assembly of 631 Minimum Survival Pockets for prime contractors supporting DLA supply contracts. The work must be performed according to NSN 1670-00-988-3093 using industrial textile cutting and sewing equipment, with First Article Testing conducted at Wright Patterson AFB. Performance of the contract is centered at Tinker AFB. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval to ensure ITAR and EAR compliance. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manufacture of Transmission Shafts (NSN 2530218786981)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

Brass Pipe Coupling Manufacturer/Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Droop Actuator Caps

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Malleable Iron Universal Fitting Supplier

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Manufacturer/Supplier of Plug Assembly, Sealing (NSN 5340-01-474-8186)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Multiple Angle Sensor Brackets

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Precision Machining/Fabrication of Entry Door Hinge Brackets

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Spare Tire Retainer Fabrication

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Pressure Plates (NSN 1680-00-249-7106)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Precision Machining and Fabrication of Resonance Pistons

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Specialized Component Manufacturing for Maintenance Kits

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Manufacture of Support Brackets (NSN 1615-00-938-9754)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS