Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Metal Bar Supplier – Copper Alloy 172 (UNS C17200)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of 75 feet of copper alloy bar, with a permitted tolerance of plus or minus 10 percent, made from UNS C17200 material in a round cross-section measuring 0.625 inches in diameter and in TB00 temper condition. All material must fully comply with the latest editions of ASTM B196/B196M-24 and ASTM B249/B249M-23 specifications, ensuring strict adherence to chemical composition, mechanical properties, and dimensional accuracy. The product must be accompanied by comprehensive material certification verifying conformity to these standards, and packaging and labeling must conform to MIL-STD-129 requirements to ensure proper identification and traceability throughout the supply chain. Delivery is mandated to take place at New Cumberland, Pennsylvania, with all handling, labeling, and documentation completed in accordance with federal military logistics protocols. The contract is classified as a subcontract under the NAICS code 331492, issued by the Defense Logistics Agency under the Department of Defense, and was posted on July 21, 2026. No set-aside designation is specified, and the procurement is managed through the DIBBS platform, with the award referenced under contract number SPE8E426V1388.

General Info

75 feet of UNS C17200 copper alloy bar, 0.625 inch diameter, TB00 temper, per ASTM B196/B249, MIL-STD-129, delivered to New Cumberland, PA.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

331492 - Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-26-T-1804.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 75 feet (±10%) of copper alloy bar (UNS C17200), round, 0.625-inch diameter, TB00 temper, meeting ASTM B196/B196M-24 and ASTM B249/B249M-23 specifications. Includes material certification, packaging, labeling per MIL-STD-129, and delivery to New Cumberland, PA.

Similar Contracts

Same NAICS industry code

Silver Reutilization and Account Maintenance Service

Solicitation # N0025327Q0001

The Naval Undersea Warfare Center Division, Keyport is seeking a contractor for Silver Reutilization and Account Maintenance Services. The primary objective is the refinement of silver-bearing materials recovered from Silver/Zinc and Silver/Chloride batteries to achieve a purity of 99.9%, which will then be used to manufacture new batteries. Annual requirements include the processing of 328,060 troy ounces of high silver content material and 582,421 troy ounces of low silver content material, alongside the maintenance of silver accounts for 439,108 troy ounces. The government will handle the disassembly and categorization of batteries into high-yield and low-yield materials, with the exception of small batteries like AA-sized units. The government intends to award one Indefinite-Delivery Indefinite-Quantity (IDIQ) contract with a five-year ordering period using Lowest Price Technically Acceptable (LPTA) procedures. The contract will be Fixed-Price with Economic Price Adjustment based on the London Bullion Market Association Silver Price index. Performance will take place at the contractor's facility, with a requirement that refined silver be available for transfer within 60 days of receipt of materials. The contractor must maintain up to eight electronic accounts for various Navy programs and provide detailed reporting on materials processed, account balances, and quarterly progress. This is a full and open competition under NAICS code 331492, with the final Request for Quote expected around October 2026.

Naval Undersea Warfare Center

POSTED

about 5 hours ago

DEADLINE

in about 1 month

SOLDER, TIN ALLOY

Solicitation # SPE8E9-27-T-0017

Solicitation SPE8E9-27-T-0017, issued by DLA Troop Support, is a request for quotations for 341 units of Tin Alloy Solder (NSN 3439002699610), with each unit defined as 16 ounces. The material must comply with ASTM B32 (R 2014) and meet NAVAIR aircraft launch and recovery equipment traceability requirements. Key technical constraints include a non-extendable shelf life of 60 months and a strict prohibition against the intentional addition of mercury or mercury-containing compounds. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California, with a need ship date of January 7, 2027, and a final required delivery date of January 31, 2027. The contract mandates rigorous quality and packaging standards, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331 and packaging per MIL-STD-2073-1E and MIL-STD-129. Because the item is classified as hazardous material, the contractor must adhere to IP025 and the Hazard Communication Standard for labeling and shipping. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. A price evaluation preference is available for SBA-certified HUBZone Small Business Concerns.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SOLDER, TIN ALLOY

Solicitation # SPE8E9-27-T-0242

Solicitation SPE8E9-27-T-0242 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 300 units of tin alloy solder. The required material is 0.015 inch diameter with a specific chemical composition consisting primarily of tin 63.5 and lead 35.53, with trace amounts of antimony, bismuth, copper, arsenic, iron, aluminum, and zinc. Delivery is required within 32 days after order, with a destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and RP001, and requires a Material Safety Data Sheet to accompany all shipments. Because the material is classified as hazardous, packaging must comply with DLA 4145.3 for military air shipments and labeling must meet 49 CFR and 29 CFR standards. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. Award evaluation includes a price preference for SBA-certified HUBZone Small Business Concerns, while offers utilizing additive manufacturing are ineligible. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

in about 24 hours

Covetic Material Process Development & ValidationThe NASA SBIR/STTR Program has issued a subcontract for the development and validation of manufacturing processes for covetic, a nanocarbon-infused metal. This project focuses on utilizing additive techniques to optimize feedstock and operational parameters while verifying the resulting enhancements in material properties. The contract is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, requiring the recipient to have fewer than 500 employees. Performance for this initiative will take place in Huntsville, Alabama, under NAICS code 331492.

NASA SBIR/STTR Program

POSTED

DEADLINE

High-Temperature Materials SupplyThis subcontract through the NASA SBIR/STTR Program focuses on the supply of high-specification nickel-based superalloys, specifically Inconel 600 and 718. These materials are required for OHP components that must maintain resistance to creep and oxidation at temperatures reaching 1400K. The project is categorized under NAICS code 331492 and will be performed in Cleveland, zip code 44135. The opportunity is designated as a Total Small Business Set-Aside, adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Posted on August 20, 2026, the contract is managed by the National Aeronautics and Space Administration to ensure the procurement of specialized materials capable of withstanding extreme thermal environments.

NASA SBIR/STTR Program

POSTED

DEADLINE

High-Capacity Lithium-Aluminum Alloy Anode DevelopmentThis subcontract, issued by the NASA SBIR/STTR Program, focuses on the development and fabrication of a high-melting-point Li0.7Al0.3 alloy anode. The primary technical objective is to create an anode that maintains stable interface contact with LLZO and exhibits low interfacial resistance, specifically designed for use in batteries operating within extreme environments. The project is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. Performance for this contract is centered in Cleveland, Ohio, under NAICS code 331492.

NASA SBIR/STTR Program

POSTED

DEADLINE

Refractory Metal Feedstock & Components SupplyThe NASA SBIR/STTR Program is seeking a subcontractor to supply specialized refractory metal feedstock, such as tungsten and molybdenum, or high-temperature components including crucibles and heating elements. These materials must be capable of withstanding extreme thermal cycles specifically designed for use in microgravity environments. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, restricting eligibility to firms with fewer than 500 employees. The work will be performed in Huntsville, Alabama, under NAICS code 331492.

NASA SBIR/STTR Program

POSTED

DEADLINE

Shape Memory Alloy (SMA) Material Development and FabricationThis subcontract through the NASA SBIR/STTR Program focuses on the development and fabrication of Shape Memory Alloy (SMA) sheet materials. The primary objective is to optimize these materials for erosion resistance and deicing performance, which involves precise alloy formulation and the tuning of thermal and strain responses. The project is designated as a Total Small Business Set-Aside for entities with fewer than 500 employees, falling under NAICS code 331492. Performance of the contract is centered in Cleveland, Ohio, with the work being managed under the agency's specialized small business innovation research and technology transfer mandates.

NASA SBIR/STTR Program

POSTED

DEADLINE

Plasma Spheroidization of Nitride PowdersThe Plasma Spheroidization of Nitride Powders subcontract, issued by the NASA SBIR/STTR Program, focuses on the optimization and scaling of plasma processing techniques. The primary objective is to produce spherical uranium nitride powder particles characterized by enhanced flowability and a reduction in satellite formation. This technical scope includes critical quality control measures such as feedstock screening and the removal of fine particles to ensure material consistency. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, specifically for firms with fewer than 500 employees. The work is categorized under NAICS code 331492 and is slated for performance in Cleveland, Ohio. Interested parties can find further details through the NASA TechPort portal.

NASA SBIR/STTR Program

POSTED

DEADLINE

Component Supply / Raw Material SourcingThis subcontract with the Defense Logistics Agency under the Department of Defense involves the sourcing and supply of raw metal stock or alloy blanks specifically for the production of precision spacer rings. The procurement falls under NAICS code 331492 and requires strict adherence to defense supply chain standards, including the provision of traceable certifications for all materials supplied. The contract was posted on August 17, 2026, and is managed through the Department of Defense's procurement systems. The primary focus of the agreement is to ensure the delivery of high-quality raw materials that meet rigorous military specifications to support the manufacturing of critical precision components.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material and Specialty Alloy SupplyThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, focuses on the supply of aerospace-grade metal alloys. The materials are specifically required for the manufacturing of hydraulic brake pistons and must include full traceability and certification to meet stringent aerospace standards. The contract is categorized under NAICS code 331492 and was posted on August 17, 2026. It establishes a procurement pipeline for specialty alloys essential for critical defense components, ensuring that all raw materials meet the necessary technical specifications for aviation safety and performance.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Metal Material SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply of DFARS-compliant specialty metals, specifically titanium and high-strength alloys. These materials must be melted or produced within the United States or other qualifying countries to meet regulatory requirements for use in fastener manufacturing. The agreement is categorized under NAICS code 331492 and was posted on August 17, 2026. This procurement ensures that critical materials used in defense-related fastener production adhere to strict domestic sourcing and quality standards.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lead-Acid Sealed Gel Electrolyte Storage Battery Supply

Battery Manufacturing

POSTED

DEADLINE

Supply of Plastic Press Strips

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Supply of NSN 4820013550268

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Polyurethane Coating Material Supplier

Paint and Coating Manufacturing

POSTED

DEADLINE

Pneumatic Tire Valve Supplier

Other Support Activities for Air Transportation

POSTED

DEADLINE

Supply of Critical Application Check Valves (NSN 4820014168804)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

PLASTIC STRIP, PRESS

Solicitation # SPE8E5-27-T-0390

Solicitation SPE8E5-27-T-0390 is a small business set-aside request for quotation issued by the Defense Logistics Agency for the procurement of one plastic press strip, identified by NSN 9330-01-679-0943. The item is subject to a non-extendable shelf life of 36 months and must be delivered FOB Origin to Hattiesburg, Mississippi, within 20 days after the order is placed, with an original required delivery date of March 30, 2026. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA training. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting requirements is mandatory. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

CONTAINER, FREIGHT, UTIL

Solicitation # SPE8ED-27-Q-0082

POSTED

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1324

Solicitation SPE7MC-27-T-1324 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for one fluid valve stem, identified by NSN 4820-01-355-0268. The requirement specifies a delivery timeline of 20 days after the order, with shipping terms set as FOB Destination to the USS North Carolina SSN 777. The award may be processed via automated award, and a price evaluation preference is available for HUBZone small business concerns. The contract imposes strict technical and security requirements, including compliance with CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification. Quality standards mandate that the manufacturer's inspection system comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1323

Solicitation SPE7MC-27-T-1323 is a procurement issued by the Defense Logistics Agency for three check valves, identified as NSN 4820014168804. This is designated as a critical application item with acceptable part numbers from Parker-Hannifin Corporation (2640491), Aerocontrolex Group (45-9600 Rev A), and Eaton Corporation (40097 or L6735). The requirement is part of a Foreign Military Sales program for Brazil, with a required delivery date of November 3, 2026, and a delivery window of 20 days after order. Shipping is handled via FOB Origin, with the freight forwarder located in Temple Hills, Maryland, and the final destination at the Parque de Material Aeronautico de Sao Paulo in Brazil. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates DLA technical requirements RA001, packaging requirements RP001, and government identification removal protocols RQ011. Inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards. Offers must be submitted by November 9, 2026, and cannot include items produced via additive manufacturing.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, PNEUMATIC TIRE

Solicitation # SPE7L7-27-T-0448

Solicitation SPE7L7-27-T-0448 is a small business set-aside request for quotations issued by the Defense Logistics Agency for the procurement of six pneumatic tire valves, identified by NSN 2640-01-583-8571. The contract requires delivery within five days of award to the NAVSUP Weapon Systems Support Joint Consolidation Point in Mechanicsburg, Pennsylvania. Shipping terms are established as FOB Origin, with both inspection and acceptance also occurring at the origin. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates DLA packaging requirements RP001 and technical requirements RA001. Key regulatory clauses include FAR 52.246-2 for inspection, DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program, and DFARS 252.204-7012 for cybersecurity reporting. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-27-T-0446

Solicitation SPE7L7-27-T-0446 is a small business set-aside issued by the Defense Logistics Agency for the procurement of one sealed lead-acid battery with gel electrolyte, identified by NSN 6140-01-310-7173. The item is classified as a commercial off-the-shelf product with a non-extendable shelf life of six months. Delivery is required within five days of order, with a final required delivery date of October 22, 2026, shipped FOB Destination to the M L Britt USAR Center in North Little Rock, Arkansas. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and the Hazard Communication Standard for hazardous materials labeling. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Key regulatory requirements include the Buy American Act, DFARS cybersecurity reporting standards, and the prohibition of intentionally added mercury. Payment must be processed electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Domestic Sourcing of Raw Materials and Components

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Components

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Component

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Ducting

Defense Logistics Agency

POSTED

DEADLINE

Specialty Metal or Alloy Supply for Aerospace Components

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Chrome Copper Components

Defense Logistics Agency

POSTED

DEADLINE

Raw Material and Component Supply

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Stainless Steel Raw Material (Medical Grade)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Supply of Raw Materials and Sub-Components

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Supplier of Raw Materials or Components for Bearing Assembly

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace Forging

Defense Logistics Agency

POSTED

DEADLINE

Raw Material and Component Supply for Self-Lubricating Bearings

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS