Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Metal Bar Supply – Steel 4130 Cold Drawn Square Bars

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of precision alloy steel 4130 bars in cold drawn and normalized condition, with a square cross-section measuring exactly 1.000 inch on each side and lengths ranging from 10 to 12 feet. The material must fully comply with established military and industry standards governing metallurgical properties, dimensional tolerances, and surface finish to ensure suitability for high-performance applications. The bars are intended for use in critical components requiring consistent mechanical behavior and structural integrity under demanding operational conditions. The solicitation is issued as a subcontract under NAICS code 331210, tied to the Department of Defense activity at Cherry Point, North Carolina, with the specified place of performance listed as 28533-5040. The opportunity was posted on July 16, 2026, and responses must be submitted no later than July 24, 2026. Although no solicitation number is provided, the contract reference is accessible via the DIBBS portal, indicating it is part of a formal defense procurement pathway governed by federal supply protocols and quality assurance requirements.

General Info

Supply of 1.000-inch square cold drawn normalized 4130 steel bars, 10–12 ft long, for DoD use at Cherry Point by July 24, 2026.

Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDGView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CHERRY POINT PHANTOM RD BLDG

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CHERRY POINT PHANTOM RD BLDG

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of precision alloy steel 4130 bars, cold drawn and normalized, square cross-section (1.000 in), 10–12 ft lengths, meeting military and industry specifications for metallurgy, dimensions, and surface finish.

Similar Contracts

Same NAICS industry code

TUBE, FUEL DRAINThis contract specifies the procurement of a fuel drain tube, identified by part number L21609G01 and NSN 4710-00-613-7270, with a quantity of three units to be delivered FOB origin within 169 days, with no acceptable variance in quantity. The item is classified as a commercial item and designated as a critical application item, subject to strict compliance with military and defense standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special markings required. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for specific functional uses approved by NAVSEA, with portable mercury-containing devices requiring dual containment and shockproof design. All packaging and palletization must conform to DLA Packaging Requirements and IP056 restrictions, and the delivery destination is specified as the DLA Distribution San Joaquin warehouse in Tracy, California. The contract was issued under solicitation SPE4A5-26-T-282T with a response deadline in July 2026, and the required delivery date is October 5, 2027, with a need ship date of January 3, 2027. The purchase request number is 7017409179, and primary point of contact is Donetta Nelson of the Department of Defense.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

TUBE, METALLICThe contract specifies the procurement of seamless metallic tubes made from aluminum alloy 6061 in temper T6, with dimensions of 1-1/2 inches square by 1/4 inch wall thickness and a standard length of 21 feet per unit, conforming to the ASTM B221-21 standard for extruded aluminum products. The tubes must meet strict quality and packaging requirements outlined in DLA’s Master List of Technical and Quality Requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The use of ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specification. Each unit is designated as a linear foot equivalent (LG), with a total quantity of 91.905 LG, rounded to 92 units, and no variance in quantity is permitted. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and the delivery deadline is set for 221 days from contract award, with a required ship date of February 24, 2027. Packaging must also adhere to ASTM B660 and DLA’s packaging requirements, with palletization and container specifications detailed per DLA guidelines. The item is identified by NSN 4710-01-182-2428, and the delivery address is DLA Distribution Red River in Texarkana, Texas. Full and open competition applies, with contract administration handled by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-234E, and primary point of contact is Rory O’Reilly.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

North Fork French Creek Pipe Arch Materials

Csa Intermountain 4 Usda-Fs

POSTED

about 20 hours ago

DEADLINE

Precision Steel Bar Manufacturing (Carbon & Alloy)The contract entails the manufacturing of precision carbon and alloy steel bars meeting SAE-AISI .28–.50C and ASTM A311/A311M specifications, requiring strict adherence to dimensional tolerances, mechanical properties, and material composition standards. Full traceability of material origin, processing steps, and final inspection results is mandatory, ensuring complete documentation from raw input to finished product. Compliance with U.S. defense article controls is a fundamental requirement, meaning all production, handling, and shipping must align with applicable ITAR and EAR regulations to safeguard sensitive defense-related materials and technologies. Production is to be performed at the designated place of performance in Texarkana, with a response deadline of July 27, 2026, and the solicitation posted on July 16, 2026. This is a subcontract under the NAICS code 331210 for Iron and Steel Mills and Ferroalloy Manufacturing, sponsored by the Department of Defense through the Land Supply Chain organization. The work is subject to defense procurement protocols, including quality assurance, security clearances, and reporting obligations necessary for supporting critical military systems. Bidders must demonstrate proven capability in high-integrity steel bar production and possess the infrastructure to maintain complete material traceability throughout the manufacturing lifecycle.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Steel Bar Supply – UNS K23080 Round BarThe contract calls for the supply of round steel bars made from UNS K23080 material, with a diameter of 3.000 inches and lengths ranging between 10 and 12 feet, fully compliant with applicable military and ASTM standards. All materials must be properly preserved, packaged, and marked according to government specifications to ensure integrity during transport and storage. Delivery is required to the DLA New Cumberland facility, with the place of performance identified as New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation is classified as a subcontract under NAICS code 331210, which pertains to steel product manufacturing. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, with all submissions handled through the DIBBS platform. There is no set-aside designation specified, and the contracting activity falls under the Department of Defense, specifically the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Cold-Finished Steel Bar Supply (Grade 1018/1020, 6" Diameter)The contract calls for the supply of 115,000 linear feet of cold-finished round steel bar with a 6-inch diameter, manufactured to meet stringent industry standards including ASTM A108, A29/A29M-20, A700-14, and SAE AMS2806, ensuring material consistency, mechanical properties, and surface finish suitable for precision applications. The steel grade is specified as 1018/1020, commonly used for machined components requiring good machinability and moderate strength, and each shipment must be accompanied by a Certificate of Quality Compliance to verify adherence to all technical requirements. The contract is classified as a subcontract under NAICS code 331210, which pertains to steel pipe and tube manufacturing from purchased steel, and is issued by the DLA Dist San Joaquin under the Department of Defense. The performance location is in Tracy, California, with a ZIP code of 95304-5000, and the solicitation was posted on July 16, 2026, with bids due by July 24, 2026. All deliveries must align with the specified material specifications and quality documentation standards, with no set-aside provisions indicated, meaning eligible suppliers of any size may respond.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Cold-Drawn Steel Hex Bar SupplyThe contract calls for the supply of cold-drawn, annealed E4340 alloy steel hex bars measuring 0.750 inches across flats and ranging in length from 10 to 12 feet, with all material required to meet recognized military or industrial specifications. The product must conform to stringent quality and mechanical property standards appropriate for high-strength aerospace or defense applications, ensuring consistency in composition, surface finish, and dimensional accuracy. The delivery location is Tracy, California, with a zip code of 95304-5000, and the material is intended for use under a subcontract arrangement within the Department of Defense supply chain. The solicitation was posted on July 16, 2026, with a firm response deadline of July 24, 2026, and is managed by DLA Dist San Joaquin under NAICS code 331210, which classifies the industry as forged and stamped metal product manufacturing. The terms imply strict compliance with technical documentation, certification of material test reports, and adherence to specified delivery schedules, as the contract supports critical defense or military equipment production. Although no specific set-aside designation is indicated, the procurement is handled by a federal agency with established protocols for defense-grade material sourcing and supplier vetting.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Raw Material Supply – Steel Tubing to MIL-T-3520 Type 3

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Corrosion-Resistant Steel Plate (Aircraft Quality)The contract requires the supply of 6,000 pounds of corrosion-resistant, aircraft-quality steel plate designated as COMP 4340, which must be hot-rolled and annealed to meet exacting dimensional standards and full material traceability. The material must conform to military specifications for both composition and marking, ensuring suitability for high-performance aerospace applications where reliability and durability are critical. All delivered material must be properly documented and labeled in accordance with defense-grade requirements to guarantee authenticity and compliance throughout the supply chain. This is a subcontract issued by the Department of Defense through the Depot Oklahoma office, with a solicitation posted on July 16, 2026, and responses due by July 20, 2026. The NAICS code 331210 indicates this pertains to the rolling of steel and other metal products. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA DIBBS platform, suggesting it is part of a broader defense logistics effort. Bidders must ensure their proposals meet all technical, marking, and traceability criteria to be considered eligible for award.

POSTED

DEADLINE

Supply of Metallic Tubing for Defense ApplicationThe contract seeks the manufacture and delivery of 74 units of metallic tubing specifically designed for defense applications, with all units required to meet FAA airworthiness compliance standards to ensure safety and reliability in aerospace environments. Each component must be packaged according to stringent military packaging specifications to protect against damage during transit and storage, and full supply chain traceability is mandated to verify the origin of raw materials, manufacturing processes, and quality control measures throughout the lifecycle of the product. The tubing is intended for critical defense systems, necessitating rigorous documentation and adherence to defense-grade quality assurance protocols. The solicitation is classified as a subcontract under NAICS code 331210, which corresponds to aluminum rolled metal product manufacturing, and is issued by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. Responses must be submitted by July 30, 2026, with the opportunity posted on July 16, 2026. The place of performance and specific delivery location are not detailed in the available information, but performance expectations are tied to defense-specific requirements, including compliance with federal and military regulations. Bidders must be prepared to demonstrate capability in producing high-integrity metallic components under traceable, auditable conditions suitable for military aerospace use.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Metal Bar Supplier (Chrome-Molybdenum 4130 Steel)The contract requires the supply of 131 feet of AISI 4130 chrome-molybdenum steel round bar, precisely cut to specified lengths, with full material traceability and strict adherence to military standards. The material must meet exacting quality and performance specifications to ensure reliability in critical applications, and all production and inspection records must be maintained to support traceability throughout the supply chain. Compliance with relevant military specifications is mandatory, and the supplier is expected to deliver material that is certified and verified against required mechanical and chemical properties. This is a subcontract under solicitation SPE8E926Q0574, issued by the Department of Defense through the Construction & Equipment MRO SVC I agency, with a response deadline of July 23, 2026. The NAICS code 331210 indicates this falls under the forgings and stampings manufacturing sector, aligning with the nature of precision metal bar production. All deliveries must be made to the specified place of performance under the terms outlined in the solicitation, and bidders are expected to demonstrate the capability to consistently meet military-grade quality controls, documentation requirements, and on-time delivery commitments.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

TUBE, METALLICThe contract specifies the procurement of 27.54 continuous lengths of metallic tube, each 50 feet long, totaling 28 units, with the NSN 4710011374340 and part number 3P669 from W.W. Grainger, Inc. The material is copper and must adhere to all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards such as ASTM D3951 for packaging. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. Delivery is FOB origin with a required delivery date of October 14, 2026, and a need ship date of December 21, 2026, under a 146-day acceptance window. Quantity variance is strictly zero percent, and inspection and acceptance occur at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 for general transport and C20 for first destination logistics. The solicitation number is SPE7M4-26-T-266R, issued by the Department of Defense’s Fluid Handling Division, with primary contact Rory O’Reilly available for inquiries. Units are defined by the DoD standard and mapped to ANSI X12 through official DLA documentation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → CHERRY POINT PHANTOM RD BLDG

Same awarding agency

Packaging, Preservation, and Labeling ServicesThe contract requires comprehensive packaging, preservation, and labeling services for regulator parts kits in full compliance with U.S. military standards, including MIL-STD-2073 for preservation and MIL-STD-129 for marking and labeling. All items must be properly prepared for long-term storage and global distribution, with mandatory application of Unique Item Identifiers and barcodes to ensure traceability and inventory accuracy throughout the defense supply chain. The work must adhere strictly to government specifications for materials, methods, and documentation to meet operational readiness requirements. This subcontract is issued under NAICS code 561910 for other support services and is solicited by the Department of Defense through the Cherry Point Phantom Rd Bldg office. The solicitation opened on July 17, 2026, with responses due by July 23, 2026, and performance is expected to support military logistics operations without restriction to a specific geographic location. Interested parties must submit proposals through the DIBBS system using the provided link, ensuring full compliance with all technical, regulatory, and administrative requirements prior to the deadline.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Component Supply for Regulator AssemblyThe contract involves the supply of precision military specification components including valves, O-rings, housings, and springs for integration into a breathing gas regulator parts kit. All components must be manufactured with traceable materials and strictly conform to approved military drawings to ensure interoperability, reliability, and safety in critical operational environments. The work is classified as a subcontract under NAICS code 332710 and is procured by the Department of Defense through the CHERRY POINT PHANTOM RD BLDG office. Suppliers must respond by the deadline of July 23, 2026, with full compliance expected in material sourcing, dimensional accuracy, and documentation. The place of performance and point of contact details are not specified, but the solicitation is accessible via the DIBBS platform under reference number SPE8E626Q0571.

POSTED

about 15 hours ago

DEADLINE

Manufacture of Breathing Gas Regulator Parts KitThe contract requires the full-scale production, assembly, quality assurance, and timely delivery of 4,000 units of a military-spec breathing gas regulator parts kit identified by NSN 4240-01-542-8151. All manufacturing and assembly activities must comply with stringent defense standards including DFARS requirements, source inspection protocols, and specific packaging guidelines to ensure operational readiness and field reliability. The work must be executed with strict adherence to military quality control procedures, and all components must meet or exceed the technical specifications outlined for the regulator system. This is a subcontract opportunity under the Department of Defense, with performance obligations tied to the defense industrial base. The solicitation was posted on July 17, 2026, and responses are due by July 23, 2026, indicating a short turnaround window for qualified suppliers to submit proposals. The NAICS code 332994 classifies this as a miscellaneous fabricated metal product manufacturing activity, emphasizing precision engineering and components production. While no specific location for performance or point of contact is provided, the contract is administered through a Defense Logistics Agency platform, and successful offerors will be expected to meet strict defense supply chain integrity standards without deviation.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Approved Brand-Specific Regulator ComponentsThe contract requires the supply of authorized OEM components with specific part numbers: AERIAL MACHINE & TOOL CORPORATION P/N 108344CW and AQUALUNG USA INC P/N 108344, which are to be integrated into breathing gas regulator kits. These components must be genuine, brand-specific, and match the exact specifications to ensure compatibility and performance within the intended system. The solicitation is issued as a subcontract under the NAICS code 332215, indicating it pertains to small arms, ordnance, and ordnance accessories manufacturing. Responses are due by July 23, 2026, with the opportunity posted on July 17, 2026. The contract is managed by the Department of Defense through the Cherry Point Phantoms Road Building entity and must be fulfilled in accordance with all federal procurement guidelines applicable to defense subcontracting.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Breathing Gas Regulator Parts KitThe contract calls for the manufacture and supply of 12,000 units of a precision parts kit designed for demand-type breathing gas pressure regulators, which are critical safety components used in life-supporting applications. Each kit must include all necessary components for either assembly or repair, ensuring full operational integrity and compliance with stringent safety standards. The requirement is classified under NAICS code 332994, indicating it falls under other fabricated metal product manufacturing, and is structured as a subcontract under the Department of Defense. All work must be completed and delivered in accordance with technical specifications that prioritize reliability, precision, and consistency, given the life-critical nature of the end-use application. The solicitation was posted on July 17, 2026, with a response deadline of July 23, 2026, indicating a short turnaround window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, but the contract is managed through the Defense Logistics Agency’s DIBBS system, suggesting a formal procurement process governed by federal contracting protocols. The absence of a set-aside designation implies the opportunity is open to all eligible contractors without preference given to small, disadvantaged, or veteran-owned businesses. Successful bidders must demonstrate capability in high-precision manufacturing, quality control, and adherence to defense-grade standards to meet the operational demands of this essential equipment.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 15 hours ago

DEADLINE

PARTS KIT, REGULATOR BRThe contract specifies the procurement of 12,000 units of a parts kit for a regulator controlling breathing gas pressure, identified by NSN 4240-01-542-8152, with a firm fixed price and no variance allowed in quantity. Delivery is required within 90 days after award, with inspection and acceptance occurring at origin. The item is classified as both a critical application and critical safety item, necessitating strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including specific methods for preservation, wrapping, and cushioning, along with MIL-STD-129 marking without special codes. The item is supplied under two part numbers from Aerial Machine & Tool Corporation and Aqualung USA, Inc., and all units must be palletized per DLA guidelines. The delivery and shipping destination is DLA Distribution Cherry Point in North Carolina, with transportation governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8E6-26-Q-0572, with a response deadline in July 2026 and an award expected shortly thereafter. Covered Defense Information may apply, and documentation for source approval must follow RC001 requirements. Removal of government identification from non-accepted supplies is mandated under RQ011, and the unit of issue aligns with DoD standards as defined in the official DLA unit conversion spreadsheet. All contractual obligations are binding upon suppliers, with compliance enforced through origin inspection and acceptance.

POSTED

about 15 hours ago

DEADLINE

PARTS KIT, REGULATOR BRThe contract involves the procurement of 4,000 units of a Parts Kit, Regulator for Breathing Gas Pressure, identified by NSN 4240-01-542-8151 and part number 108343, with approved suppliers including AQUALUNG USA, INC and AERIAL MACHINE & TOOL CORPORATION. Delivery is required within 90 days after award, with all items to be shipped FOB origin and subject to inspection and acceptance at the point of origin. The quantity has a strict variance of plus or minus zero percent, and the item is designated as both a Critical Application Item and a Critical Safety Item, necessitating adherence to stringent quality and safety protocols. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, including specific packaging methods, materials, and marking in accordance with MIL-STD-129 with no special marking codes. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition type. Covered Defense Information may apply, and documentation for source approval must follow RC001 guidelines. All items are to be delivered to DLA Distribution Cherry Point in North Carolina as the government shipping address, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The purchase request number is 7016936579, with a required ship date of November 7, 2026.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

Antiterrorism Awareness Training for Contractor PersonnelContractor personnel must receive antiterrorism awareness training compliant with DFARS clause 252.204-7004 to meet Department of Defense security requirements. The training is mandatory for all individuals working under this subcontract and must be delivered in accordance with federal standards to ensure readiness and threat awareness. The solicitation is issued under NAICS code 611519 for other schools and instruction, and performance is required at Cherry Point, North Carolina, with a zip code of 28533-5040. The opportunity was posted on July 16, 2026, and responses are due by July 24, 2026, with the procurement managed by the Department of Defense through the Cherry Point Phantom Road Building office. Participation is subject to full compliance with the regulatory framework governing contractor-based antiterrorism measures.

Other Technical and Trade Schools

POSTED

DEADLINE

Radioactive or Nuclear-Sensitive Material Handling SupportThe contract seeks specialized support for the handling of nuclear-sensitive materials under strict Department of Defense nuclear safety thresholds, requiring full compliance with MIL-STD-129 labeling and documentation standards. This subcontract involves advisory and operational services to ensure safe, regulated procedures are followed throughout the lifecycle of nuclear-sensitive items, with emphasis on traceability, security, and adherence to federal safety protocols. The work is to be performed at Cherry Point, North Carolina, with a response deadline of July 24, 2026, and is categorized under NAICS code 541690 for other scientific and technical consulting services. All activities must align with DoD requirements for nuclear material accountability, environmental compliance, and operational security, and the contractor is expected to demonstrate proven experience in sensitive material handling and military documentation standards.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full compliance with hazardous materials identification, labeling, and documentation requirements under OSHA’s Hazard Communication Standard and other applicable regulatory frameworks including FIFRA and FDCA. This subcontract aims to support the Department of Defense in maintaining safe handling, storage, and transport protocols for hazardous substances at the Cherry Point location, with strict adherence to federal standards for chemical safety and risk communication. All work must be executed to meet or exceed established regulatory benchmarks, with comprehensive documentation to verify accuracy and consistency in material classification and labeling. The solicitation is open for responses until July 24, 2026, and is classified under NAICS code 541620 for scientific and technical consulting services. Performance will occur at the Cherry Point facility with zip code 28533-5040, requiring on-site expertise to assess, label, and document hazardous materials properly across military operations and supply chains. The contract does not specify a set-aside type or point of contact, and interested parties must submit proposals through the provided DIBBS portal to be considered for award, with expectations for technical competence, regulatory knowledge, and proven experience in hazardous materials compliance within defense-related environments.

Environmental Consulting Services

POSTED

DEADLINE

Carbon Seal Ring SupplyThe contract requires the supply and delivery of one carbon seal matching ring with the National Stock Number 5330LN0035445, ensuring full compliance with all federal packaging, labeling, and inspection standards. The supplier assumes complete responsibility for the item until it is accepted at the destination, as specified under FOB Destination terms. Delivery must be made to Cherry Point, North Carolina, with the zip code 28533-5040, and the performance is tied to a Department of Defense facility identified as CHERRY POINT PHANTOM RD BLDG. The solicitation is classified as a subcontract under NAICS code 332999, which covers other fabricated metal product manufacturing, and responses must be submitted by the deadline of July 24, 2026, with the opportunity posted on July 16, 2026. The contract does not specify a set-aside type or point of contact, and all actions must be coordinated through the designated DIBBS platform.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Transportation and Delivery (FOB Origin)The contract involves the transportation and delivery of copper alloy bars under FOB Origin terms, meaning the responsibility for the goods and associated costs shifts to the buyer once the items are loaded at the origin point. The delivery destination is designated as DLA Cherry Point, North Carolina, with a specific zip code of 28533-5040. This is a subcontract opportunity classified under NAICS code 484220, which corresponds to Truck Transportation, Except Specialized. The solicitation was posted on July 16, 2026, and responses must be submitted by July 24, 2026. The contracting agency is listed as the Department of Defense, with the physical office referenced as Cherry Point Phantom Rd Bldg, though no specific address details are provided. All logistical responsibilities and transportation arrangements fall under the vendor once the cargo is accepted at origin, and the contract is accessible via the DIBBS portal for further details and submissions.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE