Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Metal Casting of Aft Snubber Guides

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision metal casting of four Aft Snubber Guides for the DLA Weapons Support ASC Commodities Division. The selected contractor is responsible for the design and production of tooling for part number 4-82034-1 and must utilize traditional casting processes, as additive manufacturing is explicitly excluded. All deliverables must include physical identification marking in accordance with RQ017 and undergo full inspection prior to delivery. The project is categorized under NAICS code 331511 and will be performed in Tracy, California. Due to the nature of the Department of Defense work, the contractor must maintain strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Responses for this requirement are due by November 16, 2026.

General Info

Precision metal casting of four Aft Snubber Guides due November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

331511 - Iron Foundries

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-024A.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GUIDE, SNUBBER, AFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs metal casting for prime contractors on DLA Weapons Support ASC projects. Casts Aft Snubber Guides (NSN 1440-00-018-5026) using traditional casting processes, excluding additive manufacturing. Designs and produces required tooling for P/N 4-82034-1 and performs physical identification marking per RQ017. Requires CMMC Level 2 and NIST SP 800-171 compliance. Delivers four completed, inspected guides.

Similar Contracts

Same NAICS industry code

Metal Casting and Tooling for Vehicular FendersThis subcontract involves the metal casting and tooling of 30 vehicular fenders for the Department of Defense, specifically supporting DLA Weapons Support Land projects. The selected provider is responsible for producing the fenders according to the specified Technical Data Package and must develop and maintain all necessary production tooling. Final deliverables include the finished fenders and a Certificate of Quality Compliance. To be eligible, contractors must hold JCP certification and adhere to ISO 9001 or SAE AS9003 quality standards, along with CMMC Level 2 compliance. The use of additive manufacturing is strictly prohibited for this project. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331511.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Vehicular Universal Joint Companion Flange ManufacturingThis subcontract involves the fabrication and supply of two Companion Flanges for Vehicular Universal Joints, part number 2520-00-679-9634, to support prime contractors under DLA supply contracts. The work is managed by the Department of Defense through the DLA Weapons Support Land Supply Chain ESOC Buys. The manufacturer must utilize metal casting facilities and inspection gages or fixtures that adhere to U.S. Army accuracy standards. Technical requirements include performing metal casting and sampling in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain JCP certification for handling export-controlled data and provide Buy American certification. The opportunity is categorized under NAICS code 331511.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Metal Casting Supply for Machine Gun HousingsThis subcontract involves the supply of raw metal castings for machine gun housings to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider must produce castings according to specific tooling and material requirements, ensuring that no mercury or mercury-containing compounds are intentionally added. Deliverables must be raw metal castings that are ready for final machining. Performance will take place at Hill AFB, and the contractor is required to maintain ITAR and EAR registration. Compliance with the Buy American and Balance of Payments Program is mandatory. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Hydraulic Actuator Casting and ForgingThis subcontract opportunity with the DLA Weapons Support Land Supply Chain involves the casting and forging of raw components for hydraulic actuator housings. The selected provider will be responsible for fabricating actuator bodies and components in accordance with Basic Drawing NR 53711 8835655 Revision B, utilizing specialized tooling to deliver either raw or rough-machined parts. Performance of this contract will take place in Mechanicsburg, Pennsylvania. As a Total Small Business Set-Aside under NAICS code 331511, this project mandates strict adherence to security and regulatory standards. Contractors must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance to handle the required technical data. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Casting for Flange-to-Tube AdaptersThis subcontract involves the metal casting of 56 raw blanks for straight flange-to-tube adapters to support DLA supply contracts. The work must be performed using industrial foundry equipment in accordance with technical drawing NR 19207 12296946. The project is managed under the Department of Defense through the DLA Weapons Support Fluid Handling Division, with the place of performance located in New Cumberland. Compliance with the Buy American Act and the Berry Amendment is mandatory for this contract. Additionally, the provider must maintain SAE AS9003 or ISO 9001 inspection systems and hold CMMC Level 2 or NIST SP 800-171 certification. The final deliverable consists of 56 cast metal adapter blanks.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Raw Materials for Critical Application PinsThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, involves the supply of raw metal stock for prime contractors fulfilling DLA supply contracts. The scope of work requires the delivery of certified raw metal stock, ingots, or billets that strictly adhere to the metallurgical specifications outlined in Drawing NR 53711 7225954 and TDP Rev A Gen 1. To maintain Critical Application status, the provider must supply all necessary material certifications and Mill Test Reports. The project is categorized under NAICS code 331511 and is designated for performance in New Cumberland. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 6, 2026. This procurement ensures that critical application pins are manufactured using materials that meet rigorous military and technical standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Metal Casting SupplierThis subcontract involves the supply of cast metal housings and components for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes the production of metal castings for over 20 different gages, specifically for critical application items. All deliverables must strictly adhere to the dimensional and material tolerances outlined in MIL-G-18997E and QQ-N-286G. To ensure quality and safety, the supplier is required to maintain ISO 9001 quality system compliance and provide certified mercury-free materials. The performance of this contract is centered in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Metal Casting SupplyThis subcontract involves the supply of raw or semi-finished metal castings for aircraft structural fittings to support prime contractors on DLA Weapons Support ASC projects. The work requires the production of castings according to Boeing Reference Drawing 81205 BSS7015, utilizing aerospace-grade foundry processes and specialized tooling design and fabrication to meet specific component geometry requirements. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Tinker AFB. To be eligible, providers must hold AS9003/ISO 9001 and JCP certifications. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Helical Sector Gear Manufacturing (Metal Casting)This subcontract, issued by the DLA Weapons Support Land Supplier Opns Engines, requires the manufacture and supply of three helical sector gears under NSN 3020014732361. The contractor must utilize a metal casting process and develop specific tooling for the gear geometry, though the use of additive manufacturing is strictly prohibited. The final products are to be delivered FOB Origin. The opportunity is a total small business set-aside under NAICS code 331511, with performance located in Tracy, California. To be eligible, contractors must maintain CMMC Level 2 certification and ensure full compliance with DFARS 252.223-7001 regarding hazard labeling. Responses are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Specialized Valve Body Casting and ForgingThis subcontract involves the casting and forging of valve bodies and internal components for prime contractors supporting Department of Defense supply contracts. Specifically, the work focuses on Ball Valve NSN 4820015389081, requiring the fabrication of components that meet Emerson Automation Solutions part number TFC-VA-00672 specifications. All deliverables must adhere to the DLA Master List technical and quality requirements and maintain strict compliance with the Buy American Act. Managed by the DDSP New Cumberland Facility under NAICS code 331511, the project is based in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. The primary objective is the delivery of finished cast and forged valve bodies produced using specialized tooling.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Metal Casting and Fabrication of Electrical Relay CoversThis subcontract involves the metal casting and fabrication of two electrical relay covers for the DLA Weapons Support Active Devices Division. The selected manufacturer will utilize specific tooling for NSN 5945-01-246-4797 and must apply lead finish marking in accordance with IPC/JEDEC J-STD-609. All work must adhere to the DLA Master List of Technical and Quality Requirements, and the contractor is required to maintain ISO 9001:2015 certification and ensure full compliance with the Berry Amendment. The project is categorized under NAICS code 331511 and will be performed in Tracy, California. Interested parties must submit their responses by November 16, 2026, to support prime contractors operating under the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Aileron Control Quadrant Casting and ToolingThis subcontract, titled Aileron Control Quadrant Casting and Tooling, involves performing metal casting and tooling fabrication for prime contractors supporting DLA Weapons Support aerospace projects. The selected provider will design and fabricate molds to produce raw blanks for Aileron Control Quadrants in accordance with TDP Rev B Gen 3 and specific domestic material restrictions. The final deliverables include the cast metal blanks and all associated tooling, with performance taking place at Tinker AFB. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331511. To be eligible, contractors must maintain SAE AS9100 and CMMC Level 2 certifications. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Night Vision Utility Lights (NSN 6220-01-491-1898)This subcontract, set aside for Women-Owned Small Businesses, involves the manufacture and supply of 45 Night Vision Utility Lights (NSN 6220-01-491-1898) for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict Department of Defense specifications for night vision compatibility and must adhere to the Buy American Act and Berry Amendment. Deliveries are designated for DLA Warner Robins and DLA Depot Oklahoma. Operational requirements include rigorous quality assurance performed according to MIL-STD-1916 or ASQ H1331, with packaging following MIL-STD-129 and MIL-STD-2073-1E standards. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The project falls under NAICS code 339113 and is managed through the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supplier of Rigid Metal Conduit (NSN 5975-01-349-1798)This subcontract involves the manufacture or sourcing of four units of rigid metal conduit, specifically NSN 5975-01-349-1798, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all materials meet the DLA Master List of Technical and Quality Requirements and adhere to strict quality control standards, including zero-based sampling per MIL-STD-1916 or ASQ H1331. Packaging must be completed in accordance with MIL-STD-129 and RP001, with final delivery designated for DLA Distribution Warner Robins. Beyond technical specifications, the contractor is required to maintain cybersecurity compliance as outlined in NIST SP 800-171. The project falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must have submitted responses by the November 16, 2026, deadline.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Supply of Air Wire Rope Cable (NSN 5330015557725)This subcontract involves the supply of 41 units of air wire rope cable, identified by NSN 5330015557725, to support prime contractors for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The cables must be manufactured to protect connector ends from corrosion, breaking, bending, and crushing. The contractor is required to adhere to strict military specifications, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. Performance will take place in Jacksonville, Florida, with a response deadline set for November 16, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services involves providing specialized preparation for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 349 Pin-Rivets in accordance with ASTM D3951 and RP001 standards, with markings applied per MIL-STD-129 and RQ017. All work must be performed using labeling equipment that complies with military standards to ensure proper shipment to DLA Distribution San Joaquin. The project is categorized under NAICS code 488410 and will be performed in Tracy, California. Interested parties must respond by November 16, 2026, to fulfill the requirements for this Department of Defense initiative.

Motor Vehicle Towing

POSTED

DEADLINE

Manufacturing of Pin-Rivets (Part HL12V-5-2)This subcontract involves the manufacture of 349 Pin-Rivets, specifically Part Number HL12V-5-2 / NSN 5320-00-001-8276, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must adhere to the DLA Master List of Technical and Quality Requirements and requires the use of precision machining equipment. All finished products must undergo quality sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331 standards. The contract mandates strict compliance with the Buy American Act. Performance will take place in Tracy, California, under NAICS code 332510. Interested parties must respond by November 16, 2026, to provide the total quantity of inspected and finished rivets as specified.

Hardware Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Labeling Services

Freight Transportation Arrangement

POSTED

DEADLINE

Custom Electrical Lead Fabrication

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Close Tolerance Screw SupplyThis HUBZone set-aside subcontract involves the manufacture and supply of high-precision, close-tolerance screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for providing 57,600 individual screws, distributed across 576 packages, ensuring all items strictly adhere to the military and federal standards specified for NSN 5305011937608. A critical requirement of the agreement is the implementation of Packaging Code ZZ, which mandates that a wrap or sleeve protect the entire length of the shank and threads. The work is associated with NAICS code 332510 and will be performed in New Cumberland, Pennsylvania.

Hardware Manufacturing

POSTED

DEADLINE

Supply of Hexagon Head Cap Screws

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS