This Government Contract opportunity from Department Of Defense was posted on May 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Metal Casting of Aircraft Access Door

Closed

Federal

Submission Closed05/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A6-27-T-6963

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Material Supply for Shaft AssemblyThis subcontract involves the supply of high-grade industrial alloys or steel raw material stock for shaft assemblies, specifically supporting prime contractors on DLA supply contracts. The provider is responsible for sourcing and certifying materials according to the technical data for NSN 3040-01-593-7423 and must provide Material Test Reports to verify all necessary chemical and physical properties. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations for Wheeled Vehicles, the contract falls under NAICS code 332111. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Forged Vehicular Bracket ManufacturingThis subcontract involves the manufacture and supply of 48 vehicular component brackets, identified by NSN 2590013776605, for prime contractors under DLA supply contracts. The project requires the use of custom tooling and reference drawings to execute a specific forging process, utilizing forging presses and materials that strictly adhere to NSN specifications. The scope of work includes the delivery of 48 finished forged brackets and a First Article Test report to verify part compliance. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations, the performance of this contract is centered in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Valve Component Casting and ForgingThis subcontract for the Department of Defense, managed by the DDSP New Cumberland Facility, involves the casting and forging of raw metal components to support prime contractors fulfilling DLA supply contracts. The scope of work includes the creation of specialized tooling for specific valve geometry, the casting and forging of valve bodies and internal components, and the rough machining of forged parts. All deliverables must consist of cast and forged metal valve components. Strict compliance with the Buy American Act and the Berry Amendment is required, necessitating the use of domestic metal sourcing. The project is categorized under NAICS code 332111 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Certified Nickel Alloy Raw MaterialThis subcontract involves the supply of certified nickel alloy raw material, provided as either bar stock or forging, to support prime contractors delivering components for the DLA Weapons Support ASC Commodities Division. The material must strictly adhere to the chemical and physical properties outlined in Basic Drawing NR 53711 7108795, Revision D, and must be delivered directly to the designated fabricator. To ensure full traceability and quality assurance, the supplier is required to provide Material Test Reports and Certificates of Conformance. The performance of this contract is centered in Whitehall, Ohio, under NAICS code 332111, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Casting and Forging for Motor ComponentsThis small business set-aside subcontract, titled Precision Casting and Forging for Motor Components, is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work involves the casting and forging of raw metal components for prime contractors supporting DLA motor procurement projects. The selected provider will utilize high-precision equipment to produce components according to specific drawings and specifications, while ensuring all critical processes are identified and certified. The contract falls under NAICS code 332111 and requires the delivery of fully certified cast and forged metal components. Interested parties must adhere to the timeline established by the posting date of October 25, 2026, with a response deadline set for November 5, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Nashville Electric Service is soliciting bids for the procurement of Figure 8 swing chain links under solicitation Z5418. The required items must be forged steel double eye chain links with two 7/8 inch eyes and an ultimate strength of 30,000 pounds. All links must be galvanized according to the latest revision of ASTM A123. Acceptable manufacturers are limited to Hubbel LK830 or Line Har FL8-30, and alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on October 29, 2026. Offerors are required to specify their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. The primary procurement contact for this solicitation is Alan Martinez. Any discrepancies between the ordering description and part number must be clarified with the buyer prior to the closing date.

Nashville Electric Service

POSTED

DEADLINE

Supply of Raw Material for Pin-Rivet FabricationThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of raw metal stock, castings, or forgings required for pin-rivet fabrication. The selected provider will source and deliver materials that strictly adhere to the metallurgical specifications of NSN 5320-01-365-6361. To ensure quality and compliance, the contractor is required to provide comprehensive material certifications and Mill Test Reports, while maintaining full adherence to the Buy American Act. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, regarding this requirement categorized under NAICS code 332111. The scope focuses on delivering certified raw materials or semi-finished components to prime contractors supporting DLA Weapons Support ASC projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Permanent Type Fluid Pressure Filters (NSN 4330005551299)This subcontract involves the manufacture or procurement of nine permanent-type fluid pressure filters for the DLA Weapons Support Maritime Supply Chain. The required components must match Part Number 50824 and feature reusable Monel wire-wound filtration elements with 0.002 inch spacing and 3/4-16-NF-3 female right-hand threaded connections. Additionally, the filters must be equipped with high-pressure housings rated for 3000 PSI. The project mandates strict adherence to the Buy American Act, ASTM D3951, and MIL-STD-129 standards. Performance will take place in Jacksonville, Florida, under NAICS code 332111. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Forging Services (Rough Shape)This subcontract, issued by the Department of Defense for the DLA Weapons Support Maritime Supply Chain, requires the initial forging of gun mount yoke blanks under NSN 1285012308081. The selected provider will utilize industrial forging processes, including heavy forging presses, dies, and heat-treatment furnaces, to produce rough shapes for prime contractors. Performance of the work will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332111. A critical requirement of the contract is strict adherence to the Buy American Act and the Berry Amendment to ensure all metal is sourced domestically. Responses are due by November 2, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Casting and Forging for Motor Controller ComponentsThis subcontract, titled Precision Casting and Forging for Motor Controller Components, involves the fabrication of raw metal blanks for NSN 6110-01-409-1405. The selected provider will perform casting and forging operations for prime contractors supporting DLA supply contracts, ensuring all work adheres strictly to technical drawings and specifications. A critical requirement of the contract is the provision of detailed identification regarding sources and processes for all critical operations, which must receive formal approval from the Government Design Control Activity. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the project falls under NAICS code 332111. Performance of the contract is located in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, to meet the requirements for delivering these essential motor controller components.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Grade Material Supply (Forgings/Castings)This subcontract opportunity is for the supply of raw aerospace-grade forgings or castings to support prime contractors on Depot Oklahoma projects at Tinker AFB. The selected provider must source metal stock that strictly adheres to the specifications outlined in Reference Drawing NR 76823 3-52928-092878. Key deliverables include the raw material stock along with comprehensive traceability documentation, specifically Material Test Reports and Certificates of Conformance. The contract is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332111. To be eligible, the supplier must maintain ISO 9001 standards and ensure full compliance with the Buy American Act. Interested parties must submit their responses by November 2, 2026.

DEPOT OKLAHOMA

POSTED

6 days ago

DEADLINE

in 5 days

AI Contract Overview

This contract involves the manufacturing of aircraft access doors through precision metal casting processes, ensuring full compliance with military specifications and material standards. The work is designated as a subcontract under the North American Industry Classification System (NAICS) code 332111, which pertains to metal forging. The Department of Defense, specifically the ASC Supplier Operations for the Air Force and Army Division, is the contracting agency, with the work to be performed at Tinker Air Force Base in Oklahoma. The solicitation was posted on May 22, 2026, with a response deadline set for May 28, 2026, indicating a short turnaround for contractor submissions. Although some details such as the solicitation number and point of contact are not provided, the contract focuses on precision casting techniques critical for manufacturing durable, high-quality aircraft access doors that meet stringent military criteria. The effort aims to support defense readiness by supplying components essential for aircraft maintenance and operational integrity.

General Info

Manufacture aircraft access doors via precision casting, meeting military standards, subcontract at Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

332111 - Iron and Steel Forging

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-357R.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, ACCESS, AIRCRAF

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 22

subcontract

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture of aircraft access doors using precision metal casting processes, compliant with military specifications and material standards.

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332710

New

DIBBS

Supply of Hydraulic Piston (NSN 1650015177844)This subcontract involves the manufacture and supply of three precision-machined hydraulic pistons for the Department of Defense, specifically under the ASC Supplier OE and AF Division. The parts must be produced in strict accordance with Reference Drawing NR 18876 11463841 and its subsequent revisions from 1985, 1997, and 2024 to match Randolph and Baldwin, Inc. Part Number 11463841. The contractor is required to possess a valid CAGE code registration and the necessary precision machining equipment to meet the technical specifications of NSN 1650015177844. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

Machine Shops

POSTED

5 days ago

DEADLINE

Precision Metal Casting of Aircraft Access Door

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open