This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Metal Component Manufacturing (Recessed Washer)

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPEA46-26-R-XC29

This contract is a firm fixed price solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 1,331 seal washers, identified by NSN 5310-01-536-7944. The item is designated as a critical application item and must be free of asbestos as defined in FED-STD-313. Delivery is required within 108 days after order, with inspection and acceptance occurring at the destination and shipping terms set as FOB origin. The supplier must adhere to strict packaging and labeling standards, specifically ASTM D3951 and MIL-STD-129, while following the DLA Packaging Requirements for Procurement. All technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. The contract also specifies the removal of government identification from any non-accepted supplies and references specific part numbers associated with AM General LLC and Mobile Climate Control Corp.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Guy Clamp (3) 5/8" Bolts

Solicitation # 12479

Solicitation 12479 is issued by the City of Greensboro, North Carolina, to secure a firm, delivered price for Guy Clamp (3) 5/8 inch Bolts. The solicitation was posted on August 24, 2026, with a response deadline of August 27, 2026. Bids must be submitted electronically through the GePS website, and suppliers are encouraged to submit their proposals 24 hours before the closing date to avoid potential service interruptions. Mary McCollough serves as the primary point of contact for this event. The award will be based on the lowest responsible and responsive bid, subject to the City of Greensboro Local Preference Policy. This policy provides a competitive advantage to bidders with a Significant Business Presence in the Guilford County Economic Development Alliance area, such as those with local headquarters, a specific employee residency percentage, or minimum annual local sales. For price-based contracts, if a non-eligible bidder submits the lowest bid, an eligible local bidder within 5 percent of that price may be given the opportunity to match the price to win the award. This local preference does not apply to urgent contracts, P Card purchases, or projects funded by federal or state grants.

POSTED

DEADLINE

NUT, SELF-LOCKING, HEXAG

Solicitation # SPE7M2-26-T-6451

This contract is for the procurement of self-locking hexagon nuts, identified by NSN 5310-00-483-8790 and part number MS17829-6C. The total quantity requested is 28,621 units, divided across three delivery locations: DLA Distribution Depot Hill, DLA Distribution Cherry Point, and DLA Distribution New Cumberland. The items are classified as commercial and must be manufactured according to the current revision of the applicable part standards, including NASM17829 and NASM25027. Key requirements include strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging. The contract mandates a total prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Quality assurance is emphasized through the requirement of a Certificate of Quality Compliance and critical item source inspection. Delivery is specified as FOB Origin with a delivery window of 452 days, and the solicitation is designated as a HUBZone set-aside.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-689M

The Defense Logistics Agency of the Department of Defense has issued a solicitation for the procurement of eight machine bolts under NSN/Part Number 5306-01-622-3939. This federal requirement is identified by solicitation number SPE4A7-26-T-689M and is associated with purchase request 7017784003. The solicitation was officially posted on August 24, 2026, and the deadline for responses is set for September 1, 2026. Interested parties can find further details and submission guidelines through the provided DIBBS link.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE7L4-26-U-1139

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1139 for the procurement of 16 hexagon head cap screws. The items are identified by NSN/Part Number 5305-01-613-7854 and are associated with purchase request 1000240635. This federal solicitation was posted on August 24, 2026, and requires responses to be submitted by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-6432

This contract is for the procurement of 7,143 lock washers, identified by NSN 5310-01-053-0832 and part number MS51848-45. The items are classified as critical application items and must adhere to basic specification MS51848E. The agreement specifies a delivery timeline of 161 days, with a required delivery date of June 19, 2027, and a need ship date of February 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, with limited exceptions for specific functional components. The procurement is conducted under full and open competition for the Nuclear Reactor Program within the Department of Defense.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE4A5-26-T-385H

This contract is for the procurement of 1,137 self-locking hexagon nuts with extended washers, identified by NSN 5310-01-669-3979 and Boeing part number BACN11AG3. The items are designated as critical application items and require a Certificate of Airworthiness and Conformance for FAA certified parts. Delivery is required within 165 days, with a need ship date of February 14, 2027, and shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical requirements, including supply chain traceability documentation and FAA airworthiness approval. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Item Unique Identification is not required for this procurement.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-21WN

Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4453

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one machine screw under NSN 5305-26-300-5845. The contract requires delivery within five days after receipt of order, with performance taking place in Lewis McChord. The response deadline for this solicitation is September 1, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, source approval request documentation, and specific physical identification and bare item marking. While the material generally does not have a shelf life requirement, specific provisions for Type I items are noted. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, and Item Unique Identification is not required for this specific order.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-364B

This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 21 machine screws under NSN 5305014080413. The requirement specifies part number 1647715-8 from Mission Systems Davenport Inc. Delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List. Shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation is identified by number SPE7M4-26-T-364B and falls under NAICS code 332722.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-203E

This contract is for the procurement of 593 preformed back-up rings under solicitation SPE7L3-26-T-203E for the Department of Defense. The items must be manufactured according to the current revision of the applicable part standard, specifically referencing SAE AS8791D and MIL-STD-1330E. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to quality conformance inspection requirements, and a strict prohibition on the use of asbestos, class I ozone-depleting chemicals, and intentionally added mercury. The items must be oxygen cleaned and packaged in accordance with MIL-STD-1330 and MIL-DTL-117 to protect against ultraviolet rays using waterproof, greaseproof, opaque bags. Inspection and acceptance will occur at the origin, with delivery required within 164 days. The final shipment is destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of November 22, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

NUT, SELF-LOCKING, SPLIN

Solicitation # SPE4A6-26-T-21UX

This contract is for the procurement of 978 self-locking spline nuts, identified by NSN 5310-01-092-0238 and part number MS14164-06. The hardware must be manufactured in accordance with the current revision of the applicable part standards, specifically NASM14164 and NASM8922. The items are to be delivered FOB Origin to DLA Distribution San Diego, with a required delivery date of February 20, 2027, and a delivery window of 163 days. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Item Unique Identification is not required for this order, and the material has no specified shelf life. Technical and quality requirements are further detailed in the DLA Master List.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract requires the manufacture of 27 recessed washers meeting military specifications under NSN 5310009382198, encompassing full production from material sourcing and precision machining to final inspection and packaging. All work must comply with applicable defense standards and be completed to ensure functional reliability and quality assurance for military use. The performance location is specified as Jacksonville, Florida, with a delivery deadline aligned with the proposal response date of July 24, 2026. The solicitation is issued as a subcontract under NAICS code 332722, indicating focus on metal forging and stamping operations, and is managed by the ASC Commodities Division of the Department of Defense. Bidders must ensure adherence to defense supply chain requirements and deliverables are tailored to the specifications outlined for this critical component.

General Info

Manufacture 27 recessed washers to military specs, deliver by July 24, 2026, in Jacksonville, Florida.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-06YC.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, RECESSED

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture of 27 recessed washers to military specifications under NSN 5310009382198, including material sourcing, machining, inspection, and packaging.