This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Metal Pin Manufacturing

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7L4-26-U-1100

This contract is a solicitation issued by the Department of Defense, specifically the LSO Combat Vehicles and Armament, for the procurement of 125 retaining straps. The items must be constructed of steel with either cadmium or zinc plating and are classified as critical application items. Production must adhere to specific technical data packages, including NASM21314 Revision 3 and reference drawing 98752 200415485 Revision E. The procurement is designated as a total small business set-aside under NAICS code 332510. Key requirements include strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the use of Class I ozone depleting chemicals and mandates that any substitute chemicals be submitted for approval. Delivery is required within 63 days after order, with FOB Origin terms and inspection and acceptance occurring at the destination. The solicitation is open for full and open competition among eligible small businesses.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-26-Q-1501

This contract is for the procurement of 72 helical retainers under solicitation number SPE7L1-26-Q-1501 for the Department of Defense Land Supply Chain. The items are identified by NSN 5340-01-693-6427 and are designated as critical application items. Delivery is required within 162 days after order, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, FAA airworthiness approval, and specific DLA packaging and marking requirements. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contractor must maintain supply chain traceability documentation and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.

POSTED

DEADLINE

Solicitation # N6883626Q0061

Solicitation N6883626Q0061 is a brand name requirement for the procurement and installation of Kaba electronic lock systems at Naval Air Station Pensacola, Florida. This firm fixed price contract is a total small business set-aside under NAICS code 332510. The scope of work includes the delivery of Kaba front desk units, RFID electronic locks, credentials, and software licenses, as well as the associated installation labor and project management. The contractor is responsible for the removal of legacy equipment and the integration of new systems, with a performance period of 25 weeks from the date of award. The award will be based on the Lowest Price Technically Acceptable (LPTA) methodology, evaluating price and technical capability. Technical acceptability is a pass/fail criterion based on the submission of specification sheets and confirmation of the delivery schedule. Proposals must be submitted in three PDF volumes covering price, technical responsibility, and contractor responsibility by August 18, 2026. Key requirements include compliance with MIL-STD-129 and MIL-STD-130 for marking and labeling, the use of the Wide Area WorkFlow (WAWF) system for invoicing, and adherence to DBIDS security protocols for personnel accessing the installation. All submissions must include the signed Amendment 0001.

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

Solicitation # W911S226U3973

The Department of Defense, through the W6QM Micc-Ft Drum office in Fort Drum, New York, is soliciting bids for rescue equipment under solicitation number W911S226U3973. This combined contract is designated as a total Small Business Set Aside under NAICS code 332510. The current amendment serves to modify the required tools and quantities while extending the response deadline to August 18, 2026, at 2:00 PM. Primary coordination for this requirement is handled by Aubrey Hoover, with Eric Martinez serving as the secondary point of contact. Performance of the contract is designated for zip code 22060. Interested parties can find further details and submission instructions via the official government workspace link.

POSTED

DEADLINE

Solicitation # N0010426QFD73

This contract, issued under solicitation N0010426QFD73 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, mandates the supply of an Access Cover for a 3-inch Combination Hull and Backup Ball Valve, designated as SPECIAL EMPHASIS Level I material due to its critical role in shipboard systems where failure could result in catastrophic loss of life, vessel, or system integrity. The item must comply strictly with Naval Sea Systems Command Drawing 845-4558796 and be fabricated from ASTM-B369, alloy UNS C96400, with mandatory quantitative chemical and mechanical certification traceable to heat-lot identifiers permanently marked on the component. All production and repair welding, brazing, and radiographic inspection must adhere to specified Navy standards including S9074-AQ-GIB-010/248, S9074-AR-GIB-010A/278, and T9074-AS-GIB-010/271, with full qualification data submitted for prior approval. Radiography is required on every component and must be accompanied by shooting sketches and film submitted for Navy acceptance at least 45 working days prior to source certification. The contract requires complete material traceability from raw stock through all manufacturing steps to the final delivered item, with electronic submission of test certifications and compliance documents via the Wide Area Work Flow system to Portsmouth Naval Shipyard using DODAAC N50286, with inspections and acceptances also processed through N39040. The vendor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, subject to government surveillance and audit at the source. Electronic signatures on certification documents are valid under strict control protocols, and all submissions must be unqualified, with no disclaimers permitted. Delivery of material is capped at 365 days after contract effective date, with certification data submitted no later than 20 days prior to scheduled delivery and subject to official review and acceptance prior to shipment. Subcontractors are bound by the same quality and traceability requirements, and the prime contractor is responsible for enforcing compliance throughout the supply chain. The contract is issued under emergency acquisition flexibilities and is DO-rated under the Defense Priorities and Allocations System, prioritizing national defense use. Any deviations, waivers, or

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Manufacturing of Mounting Bracket (NSN 5342016801952)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Externally Threaded Ring SupplyThis subcontract involves the manufacture and supply of 118 externally threaded rings under NSN 5365-01-070-8573 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contractor is required to ensure all items meet military-compliant standards for packaging, labeling, and documentation. The project falls under NAICS code 332510 and will be performed in Phoenix, Arizona. Interested parties must submit their responses by August 21, 2026, following the posting date of August 13, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Retaining Ring Supply (Commercial Off-the-Shelf Part)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Helical Compression Spring ManufacturingThe Department of Defense Land Supply Chain is seeking a subcontractor for the manufacture and delivery of 70 helical compression springs. These components must adhere to strict military specifications, specifically focusing on material integrity, load performance, and durability under operational stress. The project falls under NAICS code 332510 and will be performed in Phoenix, Arizona. The solicitation was posted on August 13, 2026, with a response deadline of August 24, 2026. Interested parties must ensure all technical requirements for the springs are met to satisfy the operational demands of the agency.

POSTED

DEADLINE

Supply of Machine Thread Plugs per NSN 5365-01-442-9622

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Blind Rivet Manufacturing and Supply

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Retaining Ring Manufacturing and Supply

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract specifies the manufacture and delivery of 19 straight, headless precision metal pins identified by NSN 5315-00-496-0938, requiring strict adherence to military specifications governing form, fit, function, and material composition to ensure compatibility and performance in critical applications. The work must be completed under a subcontract arrangement, with the place of performance located at Hill AFB, Utah, and all components must meet the exacting standards expected for defense equipment. The solicitation was posted on July 16, 2026, with a response deadline of July 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The NAICS code 332510 indicates the industrial category for forged and stamped metal product manufacturing, confirming the technical scope aligns with precision metal fabrication capabilities. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline, and successful bidders will be required to deliver fully compliant pins to the designated location without deviation in quality or specification.

General Info

Manufacture and deliver 19 precision metal pins to Hill AFB, Utah, per military specs by July 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-07HM.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, STRAIGHT, HEADLE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 19 units of straight, headless precision metal pins (NSN: 5315-00-496-0938) meeting military specifications for form, fit, function, and material composition.