Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Metal Pin Manufacturing

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of 110 straight pins with heads to strict military specifications, requiring full compliance with Defense Logistics Agency quality and inspection standards to ensure reliability and performance in defense applications. The work is classified as a subcontract under NAICS code 332510, and performance is designated to occur in Tracy, California, with a zip code of 95304-5000. The opportunity was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All units must meet exacting technical and tolerancing requirements consistent with military-grade production, and adherence to inspection protocols is mandatory for acceptance.

General Info

Manufacture 110 military-spec straight pins in Tracy, CA, per DLA standards, due August 17, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 110 units of a straight pin with headle to military specifications, including compliance with DLA quality and inspection standards.

Similar Contracts

Same NAICS industry code

Supply of Hardware Kit, Shop S (NSN: 5340013321618)The contract solicits the procurement and delivery of two units of a standardized hardware kit identified by NSN 5340013321618, designated as Shop S, under a subcontract arrangement. The supplier is responsible for sourcing all components, packaging, labeling, and shipping the kits in strict compliance with federal and Department of Defense logistics standards. Performance is required at the designated location in Texarkana, with a postal code of 75507-5000, and the work must adhere to the NAICS code 332510, which pertains to industrial machinery and equipment manufacturing. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and is managed by the Land Supply Chain under the Department of Defense. All deliverables must meet military-grade specifications and be appropriately documented for traceability and inspection upon receipt.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Manufacture of Lanyard Assembly (NSN 5340014555514)The contract calls for the full manufacturing, assembly, testing, and delivery of 64 military-spec lanyard assemblies identified by NSN 5340014555514, constructed in strict compliance with drawing RA001. The work is classified as a subcontract under NAICS code 332510, indicating primary activity in forgings and stampings, and is being managed by the Land Supply Chain under the Department of Defense. Performance of all tasks must occur at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on August 9, 2026, and requires responses to be submitted by August 20, 2026, leaving a window of eleven days for potential contractors to prepare and submit proposals. The contract is not subject to any set-aside designation, meaning it is open to all eligible subcontractors regardless of business size or category. All units must meet full military specifications and undergo comprehensive testing prior to delivery.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Latch Assembly Manufacturing and Final Assembly

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Manufacture and Supply of Loop Clamp (NSN 5340-01-106-6555)The contract requires the manufacture or sourcing of 71 units of a loop clamp identified by military NSN 5340-01-106-6555, fully compliant with Department of Defense technical and quality standards established by the Defense Logistics Agency. The product must meet all specified military specifications and be produced or procured to ensure operational reliability in defense applications. This is a subcontract opportunity with a Total Small Business Set-Aside designation under FAR 19.5, meaning only small businesses certified by the SBA are eligible to bid. The North American Industry Classification System code is 332510, indicating the work falls under forging and stamping operations. All work must be performed at the designated location in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, giving potential bidders approximately eleven business days to prepare and submit proposals. The contracting activity is handled by the Fluid Handling Division under the Department of Defense, though no specific point of contact is listed. Interested parties must access the official solicitation through the DIBBS portal at the provided UI link to obtain full requirements, technical drawings, and submission guidelines. Compliance with all DLA quality assurance protocols and delivery expectations is mandatory, and failure to meet specifications may result in rejection or contract termination.

FLUID HANDLING DIVISION

POSTED

about 11 hours ago

DEADLINE

Manufacture of Extension Handle (NSN: 5340012818737)The contract calls for the full manufacturing, quality testing, and delivery of 16 units of an extension handle identified by NSN 5340012818737, with all work required to comply strictly with military specifications. This includes adherence to DLA standards, MIL-STD-129 packaging requirements, and proper hazardous materials labeling if the product contains any regulated substances. The product must be produced to meet the exacting quality and performance benchmarks expected for military use, ensuring reliability and consistency across all units. The solicitation is classified as a subcontract under NAICS code 332510, targeting manufacturers capable of fulfilling defense-related production needs. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the finished goods must be delivered. The response deadline for submissions is August 20, 2026, and the opportunity was posted on August 9, 2026. The contracting entity is the Land Supply Chain under the Department of Defense, and all activities must align with the broader objectives of the Defense Logistics Agency to support military logistics and inventory readiness.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Supply of Resilient General and Utility MountsThe contract entails the manufacture and delivery of two resilient mounts identified by NSN 5340-01-501-4392, designed to meet stringent military specifications for defense applications. These components must comply with all technical requirements, including performance, materials, and durability standards, as well as specific marking and packaging protocols mandated by military guidelines. The work is to be performed under a subcontract arrangement, with the place of performance designated as Pearl Harbor, Hawaii, under the oversight of the Department of Defense through the Land Supply Chain organization. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with the NAICS code 332510 indicating classification under other metal product manufacturing. The contractor must ensure full adherence to all quality and compliance standards to support critical defense operations.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Manufacture of Stud Assemblies with Turnlock FastenersThe contract requires the precision manufacturing, packaging, and delivery of 601 units of Stud Assembly, Turnlock Fastener, identified by NSN 5325006206465, adhering strictly to military specifications covering materials, dimensional tolerances, labeling, and inspection criteria. All work must be completed to ensure full compliance with defense standards, including proper documentation and quality control measures to guarantee operational reliability in military applications. The delivery location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the final destination for the completed assemblies. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with the NAICS code 332510 indicating classification within the precision forging and stamping industry. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, allowing potential bidders a limited window to submit proposals. The contract is not subject to any specific set-aside provisions, and although the point of contact is not listed, bids must be submitted through the DIBBS portal using the provided UI link to be considered valid.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Metal Shim ManufacturingThe contract requires the manufacture of 255 precision shims according to technical drawing 18876 and Technical Data Package Revision A, with strict adherence to all dimensional, material, and performance specifications. Each shim must be produced to exacting standards to ensure compatibility and reliability in its intended application, with quality control measures implicitly required to meet defense-grade requirements. The work is classified as a subcontract under NAICS code 332510, indicating it falls within the precision forged and stamped metal products manufacturing sector. The opportunity was posted on August 9, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as Phoenix, Arizona, 85043. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the solicitation is accessible through the DIBBS system using reference number SPE4A726T634L. There is no set-aside designation specified, meaning the contract is open to all eligible small and large businesses capable of fulfilling the technical requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Mounting Plate Supply (Commercial Off-the-Shelf Manufacturing)The contract calls for the supply of 250 units of a standard mounting plate identified by the National Stock Number 5340016238342, manufactured to meet military specifications and packaging standards. This is a commercial off-the-shelf item intended for subcontractor delivery under a subcontract classification, with production and delivery expected to comply with Department of Defense requirements. The procurement is managed by the LAND SUPPLY CHAIN under the Department of Defense, with performance designated to occur in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 9, 2026, and responses must be submitted no later than August 20, 2026, with no set-aside provisions applicable. The North American Industry Classification System code 332510 indicates the work falls under the manufacturing of fabricated metal products, excluding machinery. All units must be properly packaged and documented to ensure full compliance with military logistics and handling protocols.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Precision Machined Tapered Threaded Pins Supply (AN386-2-16 / NSN 5315-00-198-8117)

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Precision Metal Bracket ManufacturingThe contract involves the precision manufacturing of mounting brackets identified by NSN 5340-01-368-2587, adhering to strict military specifications that require exacting machining standards, full material certification, and compliance with MIL-STD-130N marking requirements to ensure traceability and durability under operational conditions. The work is classified as a subcontract under NAICS code 332510, indicating specialized metal fabrication services, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, suggesting the physical production and inspection must occur at or near that location. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, giving potential contractors just under two weeks to submit proposals, and the sponsoring agency is the Department of Defense through its Land Supply Chain division, indicating this component supports critical military logistics or equipment systems.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Precision Spring Manufacturing (Helical Compression Springs)The contract requires the manufacture of 15 helical compression springs adhering strictly to military specifications identified by NSN 5340-01-109-4597. All units must be produced with full material certification and undergo comprehensive quality inspection to ensure compliance with Defense Logistics Agency standards. The work is classified as a subcontract under NAICS code 332510 and is solicited by the Department of Defense through its Land Supply Chain division. The solicitation was posted on August 9, 2026, with a firm deadline for response set for August 20, 2026. Performance is expected to meet all technical and regulatory requirements established by DLA without specified geographic restriction, and the procurement remains open to eligible subcontractors under the broader defense supply framework.

LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 11 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 11 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 11 hours ago

DEADLINE