This Government Contract opportunity from Department Of Defense was posted on July 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Metal Sheet Fabrication and Supply

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331492

New

DIBBS

Knife Blade Material Supply (Bronze Alloy)The contract solicits the supply of bronze alloy material specifically for knife blades, requiring adherence to modern equivalents of the obsolete MIL-B-16541 Grade A specifications, ensuring material compatibility with existing military-grade blade manufacturing standards. The material must meet precise mechanical, chemical, and dimensional requirements to maintain performance, durability, and interoperability with legacy and current equipment systems. This subcontract is issued under NAICS code 331492, indicating a focus on other nonferrous metal rolling, drawing, and extruding, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 28, 2026, with responses due by August 11, 2026, and the place of performance is designated as FPO, 96662, suggesting delivery to military addresses overseas or in transit. The contract does not specify a set-aside category, leaving eligibility open to all qualified contractors regardless of business size or status. Interested parties must ensure compliance with the technical specifications and deliverables outlined in the full solicitation document accessible through the provided DIBBS link, as failure to meet the material equivalence standards will result in rejection.

Defense Logistics Agency

POSTED

DEADLINE

Precision Copper Conductor Supply (OFHC Copper)The contract involves the supply of Oxygen-Free High-Conductivity (OFHC) copper conductors specifically engineered for precision magnet windings, requiring strict adherence to high-purity standards, tight dimensional tolerances, and maximal electrical conductivity. The materials must meet technical specifications critical to performance in high-precision electromagnetic applications, ensuring minimal impurities and consistent mechanical and electrical properties across all delivered lots. This is a subcontract under the Department of Energy, managed by Jefferson Labor, with the place of performance located in the 23606 zip code area. Responses are due by August 18, 2026, and the opportunity was posted on July 28, 2026, with the North American Industry Classification System code 331492 indicating it falls under Other Nonferrous Metal Rolling, Drawing, and Extruding. There is no set-aside designation specified, and the contract is intended for fulfillment through a subcontracting arrangement. All suppliers must ensure compliance with the required conductivity and purity benchmarks to qualify for award, and full technical documentation will likely be necessary to demonstrate conformance with the stringent performance criteria for magnet winding applications.

Jefferson Labor - DOE Contractor

POSTED

DEADLINE

Titanium Sheet Supply (6AL-4V, AMS4911)The contract requires the supply of 24,000 inches of titanium sheet made from alloy 6AL-4V, fully compliant with the AMS4911 specification, with no fabrication or processing included. Full traceability and complete mill test documentation must accompany the material to ensure conformance to aerospace-grade standards. The material is intended for direct use without modification, emphasizing the importance of material integrity and documentation accuracy. The solicitation was posted on July 27, 2026, with a response deadline of July 31, 2026, and is structured as a subcontract under the NAICS code 331492 for other nonferrous metal rolling and extruding. The contracting activity stems from the DLA Fleet Readiness Center at DLA Beachey Road Building, and the place of performance and point of contact details are not specified in the data provided. The official solicitation can be accessed via the DIBBS system using the provided link.

DLA FLEET READINESS CENTER DLA BEACHEY ROAD Building

POSTED

DEADLINE

Stainless Steel Hollow Bar SupplyThe contract is for the supply of stainless steel hollow bars that will serve as critical component materials in the fabrication of mooring machines, requiring strict adherence to dimensional and metallurgical specifications to ensure performance and reliability under demanding operational conditions. All materials must meet precise quality standards to support the structural integrity and functionality of the final assembled equipment. The solicitation is designated as a total small business set-aside under SBA guidelines, ensuring that only small business concerns are eligible to bid, and is classified under NAICS code 331492 for other fabricated metal product manufacturing. The contract is issued under the Department of Defense through the W071 Endist Portland office, with performance required at a location in Portland, Oregon, 97210. Bidders must submit their proposals by the deadline of July 31, 2026, at 5:00 PM, following the competitive subcontracting process outlined by federal procurement rules. As this is a subcontract opportunity, responders are expected to provide capable, compliant manufacturing and delivery capabilities without the need for direct government oversight beyond compliance and quality assurance requirements.

POSTED

DEADLINE

Stainless Steel Round Bar Supply (Type 316)The contract involves the supply of Type 316 stainless steel round bars with a diameter of 1.000 inches and a length of 12.00 inches, specifically designated under CLIN 0002, requiring strict adherence to defined metallurgical and dimensional specifications to ensure quality and performance. The opportunity is structured as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to compete, and it falls under the NAICS code 331492 for other fabricated metal product manufacturing. The solicitation was posted on July 27, 2026, with a submission deadline of July 31, 2026, at 5:00 PM, and performance is expected to be delivered to Portland, Oregon, with a ZIP code of 97210. The contracting agency is the Department of Defense through the W071 Endist Portland office, indicating the end use is likely for defense-related applications requiring high corrosion resistance and mechanical integrity.

POSTED

DEADLINE

Stainless Steel Round Bar Supply (Type 304)The contract calls for the supply of Type 304 stainless steel round bars in two diameters, 4.000 inches and 5.000 inches, each in 24-foot lengths, with mandatory cutting into 12-foot segments for all materials exceeding 20 feet in length. The material must meet the specifications for Type 304 stainless steel, ensuring corrosion resistance and mechanical properties suitable for demanding industrial applications. Deliveries are to be made to a performance location in Portland, Oregon, with zip code 97210, and all work must be completed in accordance with the technical and logistical requirements outlined by the agency. The solicitation is structured as a subcontract under a Total Small Business Set-Aside as defined by the SBA and FAR 19.5, meaning only small businesses are eligible to respond. The North American Industry Classification System code 331492 applies, identifying the sector as Other Metal Sheet and Strip Manufacturing. The response deadline is set for July 31, 2026, at 5:00 PM, and the opportunity was posted on July 27, 2026. The contracting activity falls under the Department of Defense through the W071 Endist Portland office, indicating federal defense-related use for the supplied materials.

POSTED

DEADLINE

Tungsten Hard Scrap Supply and ProcessingThe contract is for the supply and processing of 200 metric tons of defense-grade tungsten hard scrap, specifically designated for inclusion in the National Defense Stockpile. The material must meet stringent purity, packaging, and material specification standards to ensure it is suitable for high-integrity defense applications. Submission of proposals is required by August 3, 2026, and the opportunity is structured as a subcontract under the Department of Defense’s broader procurement framework, with the performing agency identified as DCSCO Columbus. The NAICS code 331492 indicates this pertains to other nonferrous metal and alloy manufacturing, underscoring the technical and industrial scope required for compliance. Performance is expected to be carried out at a location associated with the zip code 15408, although exact facility details are not provided. The solicitation is open without any specified set-aside classifications, allowing eligible contractors to compete without geographic or size-based restrictions.

POSTED

DEADLINE

Tungsten Hard Scrap SP8000 RFIThe government is issuing a request for information to explore potential sources for tungsten hard scrap under solicitation number SP8000-26-Tungsten_Hard_Scrap, with no intention of forming a binding contract or making an acquisition at this stage. This RFI is solely for planning purposes, and responses do not constitute offers or quotes; the government retains the right to proceed, modify, or cancel any future actions based on the information received. Submissions are voluntary, non-reimbursable, and become government property upon receipt, with respondents bearing all associated costs. No feedback will be provided on submissions, and participation does not guarantee future opportunities. A questionnaire must be completed and submitted along with responses, which should be sent via email to Alicia Barrowman and Felicia London by the deadline of August 3, 2026, at 5:00 PM EST. The notice is managed by the Department of Defense through the DCSCO Columbus office, with performance expected in Ohio, and the NAICS code 331492 applies to other nonferrous metal alloy manufacturing. No set aside is being used for this solicitation.

POSTED

DEADLINE

HR-2 additive manufacturing powderNASA/NSSC is seeking to award a sole source contract to POWDER ALLOY CORP for the procurement of HR-2 additive manufacturing powder, as it has been determined that this vendor is the sole provider of this specialized material. The acquisition will be conducted under FAR Part 12 as a commercial item purchase, with performance taking place at NASA’s Marshall Space Flight Center. The North American Industry Classification System code for this procurement is 331492, and the solicitation number is 80NSSC26938234Q. Interested parties may submit written capability statements to the designated point of contact by 3:00 p.m. Central Standard Time on July 30, 2026, to assist the government in evaluating whether competitive bidding is warranted; however, the decision to proceed non-competitively rests solely with the government. Oral communications will not be accepted in response to this notice. The NASA FAR Supplement Clause 1852.215-84, Ombudsman, applies, and inquiries may be directed to the official ombudsman listed on the NASA procurement website. Primary contact for this action is Cody Guidry, Procurement Specialist II, reachable at Cody.d.guidry@nasa.gov, with Shari Trigg serving as the secondary point of contact.

NASA Shared Services Center

POSTED

DEADLINE

Supply of Specialty Materials for Fabrication and PackagingThe contract entails the supply of specialty metal alloys and preservation and cushioning materials essential for fabrication processes and military-grade packaging, with strict adherence to military specifications and full traceability throughout the supply chain. All materials must meet exacting standards for performance, durability, and environmental resilience, ensuring compatibility with defense and tactical applications. The requirement emphasizes compliance with verified documentation and quality controls to support readiness and logistical integrity in field operations. Subcontractors are invited to respond by August 6, 2026, with the performance location fixed at Tracy, California, 95304-5000. The North American Industry Classification System code 331492 indicates the involvement of other base metal product manufacturing, and the contracting entity is the Fluid Handling Division under the Department of Defense. While no set-aside or organization type is specified, the solicitation is formally issued under a subcontracting framework tied to broader defense procurement objectives, with full details accessible via the DIBBS portal.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialty Steel and Cadmium Plating Materials SupplyThe contract seeks the supply of cadmium-plated steel materials compliant with MIL-DTL-18866K, specifically for use in manufacturing hydraulic nipple tubes. The materials must meet precise military specifications for composition, plating thickness, adhesion, and corrosion resistance to ensure reliability in demanding fluid handling applications. The work is intended for a subcontractor with the capability to deliver qualified materials in required quantities and timelines consistent with defense manufacturing standards. The opportunity is posted under the NAICS code 331492 for other fabricated metal product manufacturing and is administered by the Fluid Handling Division of the Department of Defense. Bidders must submit responses by August 6, 2026, with no set-aside designation specified, meaning open competition is allowed. Performance of the contract will be tied to the requirements of the defense supply chain, and all materials must be traceable and conform to applicable military standards without deviation to ensure interoperability and safety in operational environments.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material Supply for Machined SpacersThe contract is for the supply of raw metal stock compliant with military specifications, specifically intended for the manufacturing of precision military spacers. The material must consist of high-grade alloy steel or equivalent metals that meet stringent mil-spec standards, ensuring durability, performance under extreme conditions, and full traceability from origin through delivery. Suppliers are required to demonstrate strict adherence to hazardous material regulations, including complete documentation of composition, sourcing, and processing to prevent contamination and ensure safety in military applications. The solicitation under the NAICS code 331492 is classified as a subcontract opportunity issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Barstow, California, ZIP 92311-5014. Interested vendors must submit responses by August 3, 2026, and the contract emphasizes compliance, reliability, and supply chain integrity over cost alone. All deliveries must be accompanied by certified documentation validating material quality, origin, and adherence to military standards, with no tolerance for non-compliant or untraceable inventory.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract seeks the supply of a single aluminum alloy sheet made from Alloy 2024-T81, manufactured to meet the stringent specifications defined by SAE AMS4268B Rev B, ensuring high structural integrity and performance under demanding aerospace conditions. Full material certification and comprehensive traceability are mandatory, aligned with the Technical Data Package TDP Rev A Gen 2 and Quality Assurance Plan QAP 13873, guaranteeing that every step of production, inspection, and testing is documented and verifiable. The material must be delivered with all required paperwork to confirm compliance with alloy composition, mechanical properties, and processing history. This subcontract, titled Precision Metal Sheet Fabrication and Supply, is issued under the NAICS code 331492 and is part of the Department of Defense’s Construction & Equipment MRO SVC I procurement structure. The solicitation was posted on July 17, 2026, with a firm response deadline of July 24, 2026. The place of performance and specific delivery location are not detailed in the provided data, but the requirement is clearly oriented toward supporting defense-related maintenance, repair, and overhaul operations. Interested parties must submit proposals through the DIBBS portal, and compliance with all technical and documentation standards is non-negotiable for award consideration.

General Info

Supply of single Alloy 2024-T81 sheet per SAE AMS4268B Rev B with full traceability and certification for DoD MRO requirements.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

331492 - Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)View NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 17

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of one aluminum alloy sheet (Alloy 2024-T81) compliant with SAE AMS4268B Rev B, including full material certification and traceability per technical data package TDP Rev A Gen 2 and QAP 13873.