Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Metal Shim Manufacturing

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of a single precision metal shim to meet exacting military specifications, ensuring strict adherence to dimensional tolerances, approved material composition, and verified performance standards suitable for defense applications. The work must align with national defense requirements and be produced in accordance with technical and quality controls typical of military-grade components, with no allowances for deviation in critical parameters. This is a subcontract under the NAICS code 332710, issued by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at FORT STEWART, Georgia, 31314-0000. The solicitation was posted on July 26, 2026, and responses must be submitted by August 6, 2026, with the opportunity available through the DIBBS platform. The contract does not specify any set-aside provisions or small business preferences, and no point of contact information is provided in the data, though full details can be accessed via the listed UI link.

General Info

Manufacture single precision metal shim to military specs at Fort Stewart by August 6, 2026, for DoD.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

FORT STEWART, GA, 31314-0000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture one precision metal shim per military specifications, including compliance with dimensional tolerances, material composition, and performance standards for defense use.

Similar Contracts

Same NAICS industry code

Stainless Steel Precision Component FabricationThe contract calls for the fabrication of precision-machined stainless steel components in Grade 304 specifically for use in spinal needles, including shafts and hubs that must conform to stringent medical-grade tolerances and surface finish standards to ensure safety and performance in clinical applications. The work is classified under NAICS code 332710, indicating it falls under the category of forgings and stampings, and is structured as a subcontract pursuant to the Department of Defense’s Medical Supply Chain initiative. Performance of the contract is required at Fort Bragg with a zip code of 28310, and all delivered components must meet established specifications for biocompatibility, dimensional accuracy, and finish quality to support integral use in surgical procedures. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 3, 2026, providing potential suppliers a limited window to prepare and submit proposals. While no set-aside designation is specified, the procurement is governed under the Defense Logistics Agency’s DIBBS system and will be evaluated based on technical compliance, quality assurance protocols, and the ability to consistently deliver components at scale. The requirement reflects a critical supply chain need within military medical operations, emphasizing reliability, traceability, and adherence to medical device manufacturing benchmarks without deviation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Precision Machined Diaphragm ManufacturingThe contract requires the manufacture of ten flat flange diaphragms to exact military NSN and technical specifications, encompassing precision machining, full material certification, rigorous quality inspection, secure packaging, and timely delivery within 48 days of contract award. All work must adhere to stringent defense standards, ensuring the components meet the functional and durability requirements for military applications. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, indicating where the finished products must be delivered or where manufacturing must occur. The NAICS code 332710 confirms this is a precision machining and metal finishing activity, aligning with defense supply chain expectations. This is a subcontract under the Department of Defense, managed by the Construction & Equipment Manu & Con organization, and was posted on July 26, 2026, with a response deadline of August 6, 2026. While no set-aside status is indicated, the contract is part of the DLA’s procurement system and must be submitted via the DIBBS platform using the provided solicitation link. Contractors are expected to demonstrate proven capability in producing high-tolerance diaphragm components for military use, including compliance with quality assurance protocols and timely execution under tight deadlines. Failure to meet any technical or delivery requirements may result in contract default or non-payment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

NRP, PRESSURE GAUGEThe contract pertains to the procurement of 19 units of an NRP pressure gauge identified by NSN 4920-01-599-1161, issued under solicitation SPE4A5-26-T-308Z by the Department of Defense’s DLA Aviation, ASC Supplier Oper OEM Division. The contract is a simplified acquisition with a firm-fixed-price structure, totaling $361.00 at $19.000 per unit, with zero variance allowed in quantity. Delivery is required FOB ORIGIN within 62 days of order, with inspection and acceptance occurring at the destination facility located at DDSP New Cumberland, Pennsylvania. All items must be packaged in accordance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over this standard, and palletization must follow RP001. Marking and labeling shall conform to MIL-STD-129, including proper barcoding and hazardous materials identification, with the Unit of Issue and Quantity per Unit Pack strictly as specified in the contract. Quality assurance requires the use of MIL-STD-1916 or ASQ H1331, Table 1 for sampling unless otherwise directed, mandating a zero-defect acceptance criterion for all lots—no non-conformances permitted unless explicitly modified by contract text. Critical, major, and minor attributes are linked to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, superseding any conflicting specifications. Special requirements include adherence to NIST SP 800-171 for safeguarding covered defense information, with mandatory cyber incident reporting within 72 hours; contractors must also comply with DFARS clauses related to hazardous material labeling, radioactive material notification, and trafficking in persons, employment eligibility, and sustainable procurement. Invoicing must be submitted electronically via WAWF, and the contractor must be registered in SAM. The solicitation mandates electronic submission exclusively through DIBBS, and the contract incorporates numerous FAR and DFARS clauses, including deviations for cybersecurity, equal opportunity, and payment provisions, all of which must be fully implemented. The need ship date is set for April 27, 2026, with an original required delivery date of April 4, 2026, and all documentation

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Machining and Fabrication for Pump ComponentsPetrojam Limited, acting on behalf of the Government of Jamaica, is seeking a subcontractor to supply and precision fabricate custom pump components including impellers, shafts, seals, and housings in full compliance with OEM technical specifications. The work requires advanced machining capabilities using both CNC and manual processes to ensure exact dimensional accuracy, material integrity, and performance reliability for critical pump applications. The contract is classified under NAICS code 332710, indicating it falls within the mold and die manufacturing sector, and is targeted for execution at an undisclosed location within Jamaica. The opportunity was posted on July 25, 2026, and is not subject to any specific set-aside provisions. All components must meet stringent quality standards and be delivered in accordance with the OEM’s design, tolerances, and material requirements to support operational needs in industrial or governmental infrastructure.

Petrojam Limited

POSTED

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining of Quick Disconnect Coupling HalvesThe contract requires the precision machining and manufacturing of 873 units of Type I quick disconnect coupling halves, identified by NSN 4730-00-755-7237 and part number MS22068-4-TYPE-I, in full compliance with MIL-C-21049F and MS22068E specifications. All units must undergo oxygen-clean processing to meet stringent cleanliness standards required for aerospace and defense applications, with a mandatory zero-defect quality assurance protocol to ensure reliability and safety in critical fluid handling systems. The work is to be performed at Tinker Air Force Base, Oklahoma, with a delivery deadline aligned with the response submission date of July 31, 2026. This opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside program as defined by FAR 19.5, and is classified under NAICS code 332710 for machine shop fabrication. The contract is managed by the Fluid Handling Division of the Department of Defense and is open exclusively to qualified small business contractors. The solicitation, issued under reference number SPE7M326Q0169, was posted on July 24, 2026, and no additional point of contact details are provided beyond the official DIBBS portal link for submission and further inquiries.

FLUID HANDLING DIVISION

POSTED

DEADLINE

PROTECTOR, TURBINEThe contract pertains to the procurement of three units of a turbine protector identified by NSN 4920-00-571-9099 and manufacturer part number 21C1075P010 from Rhinestahl Corporation, with a delivery requirement of 297 days from the solicitation date and a mandatory delivery deadline of May 18, 2027. The item must be delivered FOB origin, with inspection and acceptance occurring at the destination facility located at the DLA Distribution Center in New Cumberland, Pennsylvania. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including adherence to MIL-STD-129 for marking, labeling, and barcoding, and RP001 for palletization. Unit of issue is each, with no variance permitted in quantity. Item Unique Identification is not required per service customer request, and covered defense information and cybersecurity requirements are governed by DFARS clause 252.240-7997, which mandates a CMMC Level 2 self-assessment and compliance with NIST SP 800-171 security controls. Compliance with export controls, prohibition of hexavalent chromium, trafficking in persons, and hazardous materials handling is required, along with electronic invoicing and receiving reports via WAWF. The contract incorporates modified FAR and DFARS clauses covering changes, subcontracts, inspection, payment, safeguarding of information, and contractor representation, including mandatory SAM.gov registration and affirmative small business status reporting if applicable. All proposals must be submitted electronically through DIBBS by the response deadline of July 29, 2026, and no physical submissions are accepted. While the pricing and total contract value are not completed in the solicitation, payment terms are fixed price and subject to electronic submission protocols. Delivery must conform to ocean transportation rules requiring documentation of vessel flag status and compliance with U.S.-flag vessel preference for shipments exceeding the simplified acquisition threshold.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining of Cartridge ReceiversThe contract calls for the manufacture of 175 cartridge receivers in full compliance with a detailed technical data package, requiring strict adherence to precise dimensional tolerances, approved material specifications, and military interchangeability standards to ensure operational compatibility and reliability. All components must meet rigorous quality benchmarks consistent with defense manufacturing requirements, and production must be executed with zero tolerance for deviations that could compromise performance or interoperability. The contract is classified as a subcontract under NAICS code 332710 and is managed by the Department of Defense through DLA Land Warren, with performance expected to occur in Warren. The solicitation was posted on July 24, 2026, and responses are due by August 13, 2026, at 7:00 p.m. The scope demands not only technical precision but also full compliance with defense-grade production protocols, ensuring the final product meets the exacting standards required for military use.

DLA Land Warren

POSTED

DEADLINE

CHASSIS,ELECTRICAL-This contract pertains to the manufacture and delivery of the CHASSIS,ELECTRICAL- under solicitation N0010426QND50, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is issued under Emergency Acquisition Flexibilities and will be awarded bilaterally upon written contractor acceptance. The item must conform to specific Cage Code 0KPC5 and reference number CCHA40450, and must be marked in accordance with MIL-STD-130 Rev N. All substitutions or design changes require prior written approval from the NAVICP-MECH Contracting Officer, classified under six defined change codes, with Code 1 allowing only part number changes when parts are identical. Strict mercury-free standards are enforced due to the item’s use on submarines and surface ships; no metallic mercury or contamination is permitted unless explicitly approved with detailed justification, protective measures, and labeling. The contractor must ensure all subcontractors comply with these restrictions and maintain inspection records for 365 days after final delivery. Quality assurance responsibilities rest entirely with the contractor, who must implement their own inspection systems to ensure compliance and may be subject to government verification at any time. Packaging must adhere to MIL-STD-2073 as specified in the schedule. The solicitation mandates that only authorized distributors of the original equipment manufacturer may respond, requiring proof of authorization signed on company letterhead. Compliance with Buy American provisions, Defense Priorities and Allocations System (DPAS) certification, and cybersecurity maturity model requirements is mandatory. The contract includes provisions for small business set-asides, subcontracts, and the mandatory use of Workflow Pro’s Assist Module for payment processing via receiving report and invoice combinations. All contractual documents are considered officially issued upon electronic transmission, and distribution of any Navy-provided documents is controlled under one of seven distribution statement codes, with NOFORN and Official Use Only materials requiring specific certification. Respondents must submit proposals before the deadline of August 10, 2026, to the designated point of contact.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

V-22 Combo 13The Naval Air Warfare Center Aircraft Division is soliciting Firm Fixed Price quotations for the manufacture, assembly, inspection, and delivery of Peculiar Support Equipment for the V-22 Aircraft under Solicitation N68335-26-Q-1124, titled V-22 Combo 13. This procurement is a 100% Small Business Set-Aside under NAICS code 332710, requiring all offerors to be certified small businesses registered in SAM.gov and to submit verified representations demonstrating status under this classification. The contract requires delivery of four distinct end items—TOW Collar, Actuator/Proprotor Hub Pitch Assembly, Transducer Set, and Bearing Removal/Installation Tool—within a 12-month period from contract award, with all deliveries going to the Defense Supply Center Richmond in Virginia under FOB Destination terms. The Government will inspect and accept all items at the destination location, requiring formal acceptance via DD Form 250 submitted through the Wide Area Workflow system, with final approval contingent upon verification of full compliance with technical specifications and contractual requirements. Access to the technical data package, which includes export-controlled Build-to-Print drawings and Controlled Unclassified Information, is strictly restricted and requires offerors to submit a valid and certified DD Form 2345 and proof of current CMMC Level 2 (Self) certification prior to gaining access to proprietary materials. Offerors must maintain AS9100D certification throughout contract performance and be ISO9001 compliant, with these requirements also flowing down to subcontractors for critical components. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by the deadline of August 3, 2026, using only Microsoft Word, Excel, or PowerPoint 2016 files with signed documents in searchable PDF format, and must remain valid for 120 days. All technical submissions must be unclassified and virus-free; hyperlinks and unauthorized submission methods are prohibited. Pricing is evaluated on a lowest price technically acceptable basis, with compliance with CMMC, DD Form 2345, SAM registration, and quality certifications acting as mandatory pass/fail gates, and failure in any of these areas renders an offeror ineligible for award regardless of price competitiveness.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

59--SEAL,ELECTRONICS BAThis contract pertains to the procurement of an Electronics Bay Seal designated as Special Emphasis Level I material, critical to the safe and effective operation of a shipboard system, where failure could result in catastrophic outcomes including loss of life or the vessel. The item must be manufactured strictly in accordance with NAVSEA drawing 8598478-03, with approved source limited to Parker Hannifin, Cage 83259, and must comply with MIL-STD-130 for marking and NAVSEA S9086-AD-SOC-030 for toxicity and flammability of non-metallic components. Mercury is strictly prohibited in any form, and configuration control is tightly enforced with requirements for electronic submission of engineering change proposals and waivers through the ECDS system. All nonconformances, waivers, and deviations must be classified as Critical, Major, or Minor and require explicit Contracting Officer approval prior to implementation, with full Objective Quality Evidence submitted via WAWF. The contract enforces stringent quality assurance protocols, including First Article Testing and the absence of Government Source Inspection, with the contractor responsible for maintaining and submitting records of all departures from internal requirements. Packaging must comply with MIL-STD-2073, and delivery is scheduled for completion within 210 days under Emergency Acquisition Flexibilities. Payment terms have been adjusted to allow 45 days for constructive acceptance instead of the standard 7, and the acquisition is set aside for small businesses with full compliance required under Buy American and related certificate provisions. All technical documentation must be handled in accordance with strict distribution controls and safeguarding requirements as per OPNAVINST 5510.1, with access to restricted documents requiring formal certification. The contract is issued under solicitation N0010426QFG18 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, with sole point of contact Noelle M. Smith.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

SEAL,FWD & AFTThis contract, identified by solicitation number N0010426QFG25, concerns the procurement of SEAL, FWD & AFT components for use in a critical shipboard system, where failure could lead to catastrophic outcomes including loss of life or the vessel itself. The item is designated as Special Emphasis Level I material requiring strict quality assurance controls and adherence to NAVSEA drawing 8598523-03, with mandatory compliance to MIL-STD-130 for marking and S9086-AD-SOC-030 for toxicity and flammability of non-metallic materials. The approved supplier is Parker Hannifin, Cage 83259, and material must be mercury-free with full traceability to the originating heat or batch. Configuration control is strictly enforced, requiring contractors to submit Engineering Change Proposals for any modifications affecting form, fit, function, or interface and to maintain electronic records of all deviations and waivers, which must be classified as Critical, Major, or Minor and approved by the Contracting Officer through the ECDS system. The contract mandates the use of Wide Area Workflow for invoicing and receiving reports, with a 45-day prompt payment window and no Government Source Inspection. Quality assurance requirements include submission of Objective Quality Evidence, adherence to MIL-STD-2073 for packaging, and compliance with the Buy American Act and small business set-aside provisions. All documentation must be handled according to distribution statement codes, particularly C and D, reflecting limited access to U.S. government agencies and contractors. The contractor must use ECDS for all submissions, including waivers, deviations, and technical inquiries, requiring PKI authentication via CAC. The final delivery deadline is set at 210 days from contract award, with warranties extending one year after the last delivery. Security protocols, including prohibitions on foreign nationals accessing certain documents, and specific procedures for requesting NOFORN or Official Use Only materials, are strictly enforced. The contract also includes comprehensive definitions for terms such as Critical Safety Item, First Article Test, and Engineering Change Proposal, underpinning the rigorous compliance expectations for this high-consequence application.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

FOB Origin Logistics and Transportation CoordinationThe contract requires coordination of FOB origin shipments to DLA Distribution in New Cumberland, Pennsylvania, with all deliveries must be completed within 165 days of award. Full compliance with DLA transportation protocols is mandatory, including adherence to established handling, documentation, and routing procedures. Invoicing must be processed through the Wide Area Workflow system to ensure timely and accurate payment processing. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for less than truckload services, indicating the scope involves specialized logistics coordination rather than direct manufacturing or supply. The response deadline is August 6, 2026, and the contract is administered by the Department of Defense under the Land Supply Chain office, with performance entirely focused on the specified delivery location in New Cumberland, PA.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

MIL-STD-129 Marking and LabelingThis contract requires compliance with MIL-STD-129 for the proper marking and labeling of items and containers, including the application of linear and two-dimensional barcodes, item and container labels, and OSHA-compliant hazardous material warnings. All labeling must meet military standards for uniformity, legibility, and traceability to ensure accurate logistics handling and inventory control throughout the supply chain. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under the NAICS code 541380, which relates to other administrative and support activities. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting agency identified as the Department of Defense under the Land Supply Chain organization.

Testing Laboratories and Services

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThis contract requires full compliance with MIL-STD-2073-1E for the packaging and preservation of military-grade items, specifically employing clean and dry preservation per Method 31, fiber paper wrap as designated by FA, and containerization standards D3 and E5. All work must align with DLA RP001 requirements to ensure readiness, durability, and compatibility with Department of Defense logistics systems. The effort is classified as a subcontract and is focused on delivery to the specified place of performance in New Cumberland, Pennsylvania, with the ZIP code 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, under the NAICS code 493190, which categorizes it within warehousing and storage services. The awarding agency is the Department of Defense through its Land Supply Chain organization, indicating this procurement supports critical military supply chain operations.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacture of Utility Access Door (NSN 5340016948336)The contract requires the manufacture and delivery of two military-spec utility access doors conforming to the National Stock Number NSN 5340-01-694-8336, with strict adherence to form, fit, and function specifications. The doors must be produced free of prohibited substances, including hexavalent chromium, ensuring compliance with environmental and safety standards for defense applications. Production is to be completed and delivered by the response deadline of August 6, 2026, with performance expected at the designated location in New Cumberland, Pennsylvania, 17070-5002. This subcontract falls under NAICS code 332312, indicating it pertains to forged and stamped metal product manufacturing, and is issued by the Department of Defense through the Land Supply Chain organization. All work must meet exacting DoD requirements without exceptions for restricted materials or deviations from technical specifications.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Hazard Communication & Safety Compliance (Labeling)The contract requires the preparation and submission of hazard warning labels in full compliance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200, specifically for shims that contain or are coated with hazardous materials. All labeling must accurately reflect the chemical hazards, precautionary statements, and required pictograms to ensure safety and regulatory adherence throughout the supply chain. The work must be completed and submitted by the response deadline of August 6, 2026, with performance obligations tied to the location of Fort Stewart, Georgia, 31314-0000. This is a subcontract under the NAICS code 541620, managed by the Department of Defense through the Land Supply Chain office, with no set-aside designation specified.

Environmental Consulting Services

POSTED

DEADLINE

Defense Logistics Packaging, Labeling, and PalletizationThe contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, and palletization of shims supplied under this agreement. All items must be properly marked with the National Stock Number, CAGE code, and RDD identifiers as mandated by the Defense Logistics Agency to ensure accurate tracking and inventory management across military supply chains. The packaging and labeling must meet exacting military specifications to support seamless integration into DLA’s logistics operations and prevent handling or identification errors during transit and storage. Performance of this subcontract is centered at Fort Stewart, Georgia, with a strict deadline for responses set for August 6, 2026. The work falls under NAICS code 561910, indicating it is classified as other support activities for transportation, aligning with specialized logistics and packaging services. The contracting authority is the Department of Defense through its Land Supply Chain division, and successful bidders must demonstrate proven capability in fulfilling DLA’s stringent packaging and labeling requirements to qualify for award.

Packaging and Labeling Services

POSTED

DEADLINE

Export Compliance and ITAR/EAR Advisory ServicesThis contract seeks advisory services to ensure compliance with the International Traffic in Arms Regulations and the Export Administration Regulations, focusing on the control of technical data, restrictions on disclosing information to foreign persons, and maintaining accurate and auditable records. The work will support the Department of Defense’s Land Supply Chain in managing sensitive defense-related information in accordance with U.S. export control laws, requiring expertise in identifying controlled data, implementing access controls, and establishing compliant recordkeeping systems to avoid unauthorized disclosures. The engagement is structured as a subcontract with a solicitation response deadline of August 6, 2026, and a posted date of July 26, 2026. It is categorized under NAICS code 541611 for management consulting services, indicating a need for strategic guidance rather than operational execution. The place of performance and point of contact are unspecified, but the work is tied to Department of Defense supply chain activities, suggesting the contractor must operate under strict security protocols and be prepared to handle classified or controlled unclassified information. Participation requires a thorough understanding of ITAR and EAR frameworks, with an emphasis on practical implementation to mitigate regulatory risk across international collaborations and technology transfers.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract supports efforts to achieve and maintain CMMC Level 2 certification through comprehensive cybersecurity compliance services including gap analysis, policy and procedure documentation development, and coordination with C3PAO assessors. It is structured as a subcontract under the Department of Defense’s LAND SUPPLY CHAIN agency and falls under NAICS code 541512, indicating it pertains to computer systems design and related services. The scope emphasizes operational readiness for CMMC Level 2, requiring tailored documentation to meet NIST SP 800-171 requirements, remediation planning for identified gaps, and seamless engagement with authorized third-party assessment organizations to facilitate a successful audit. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a tightly managed procurement timeline. While no set-aside designation or place of performance details are provided, the nature of the work suggests performance will be carried out at contractor or client facilities handling controlled unclassified information. The subcontract nature implies the successful bidder will work under a prime contractor to deliver compliance services aligned with DoD supply chain security mandates. All deliverables must ensure full alignment with CMMC framework requirements to enable certification without delays or nonconformities.

Computer Systems Design Services

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires compliance with rigorous military standards for packaging, preservation, and labeling of defense-related equipment and materials, specifically adhering to MIL-STD-129 for marking and traceability. Preservation must follow Method 33, ensuring long-term protection against environmental degradation during storage and transport. All items must be labeled with both Data Matrix and GS1-128 barcodes to enable automated tracking across the supply chain, integrating with DoD logistics systems. The work falls under NAICS code 493190, indicating it involves other warehousing and storage services, and is structured as a subcontract within the Department of Defense’s Land Supply Chain. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and performance is expected to support military logistics operations globally without a specified geographic limitation.

Other Warehousing and Storage

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract calls for independent inspection and verification of shaft assemblies using calibrated equipment to ensure full compliance with military standards, emphasizing precision and adherence to technical specifications required by defense applications. The work is classified as a subcontract under the NAICS code 541330, indicating it falls within the scope of engineering services, and is being managed by the Department of Defense through its Land Supply Chain organization. All inspections must meet rigorous quality controls to guarantee performance and reliability in operational environments. The solicitation, posted on July 26, 2026, requires proposals to be submitted by August 6, 2026, with no specified set-aside for small or disadvantaged businesses. The place of performance and point of contact details are not provided, suggesting the work may be conducted at multiple or unspecified locations aligned with defense supply chain operations. Interested parties must access the full solicitation through the DIBBS portal to review technical requirements, submission guidelines, and any additional documentation necessary for bid preparation.

Engineering Services

POSTED

DEADLINE

Precision Machining of Flexible Shaft AssembliesThe contract pertains to the manufacture of 12 flexible shaft assemblies designated by NSN 3040-00-921-5204, requiring full compliance with military specifications covering precision machining, heat treatment, and final finishing processes. All units must meet stringent performance and quality standards associated with defense-grade components, ensuring operational reliability under demanding conditions. The work is classified as a subcontract under NAICS code 332721, indicating it falls within the precision forging and stamping industry, and is being procured by the Department of Defense through its Land Supply Chain organization. Responses to this solicitation are due by August 6, 2026, with the posting date listed as July 26, 2026, indicating a limited window for qualified subcontractors to submit proposals. The place of performance and specific office details are not provided, suggesting flexibility in location as long as delivery and compliance requirements are fulfilled. The solicitation is accessible via a DIBBS link, which is the official platform for Defense Logistics Agency procurement opportunities, reinforcing the military nature of the procurement and the necessity for adherence to federal contracting protocols.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Regulatory and Compliance SupportThis contract seeks support for regulatory and compliance documentation related to DFARS, ITAR/EAR, hazardous materials reporting, and cybersecurity requirements. It is issued as a subcontract under the Department of Defense’s Land Supply Chain organization, with a NAICS code of 541690 indicating professional, scientific, and technical services. Compliance efforts must align with federal regulations governing defense-related data, export controls, environmental reporting, and cybersecurity protocols for sensitive government systems. The place of performance is designated as FPO with a ZIP code of 09591, indicating operations may involve overseas or military postal locations. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, providing a limited window for qualified vendors to submit proposals. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of business size or status.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE