Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Metal Stamping and Fabrication Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract establishes an indefinite-delivery, indefinite-quantity (IDIQ) framework for the ongoing supply of precision-stamped and forged metal components used in military vehicles, administered by the Defense Logistics Agency under the Department of Defense. It is structured with multiple contract line item numbers (CLINs) to accommodate varied component requirements, enabling flexible and scalable procurement over the life of the agreement. The NAICS code 332111 confirms the focus on metal stamping and fabrication services, aligning with the specialized manufacturing capabilities needed for defense applications. Performance is expected to support critical military vehicle systems, with deliveries distributed across unspecified locations to meet operational demands. While the solicitation number and point of contact details are not provided, the contract is accessible via the DIBBS portal, indicating official tracking and award documentation. The agreement type is classified as a subcontract, suggesting it may be awarded to a prime contractor who then mobilizes subcontractors to fulfill component production. The posted date of July 15, 2026, reflects the official announcement timing, though actual award and performance dates may vary under the IDIQ’s open-ended nature.

General Info

IDIQ contract for precision metal components for military vehicles, administered by DLA under DoD.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX-26-T-0763.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOW, VEHICULAR TOP

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ongoing supply of precision-stamped and forged metal components for military vehicles under an IDIQ contract structure with multiple CLINs.

Similar Contracts

Same NAICS industry code

Supply of Solenoid Assembly (NSN 5945016520958)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28TK

Solicitation SPE4A6-26-T-28TK is a fixed-price request for quotation issued by the DLA Aviation ASC Commodities Division for the procurement of 666 spring pins, identified by NSN 5315009239442. The items are designated as critical and require source inspection at the point of origin. Delivery is specified as FOB Origin with a required delivery date of February 17, 2027, and a need ship date of March 8, 2027. The items must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical compliance is governed by TDP Rev A Gen 1, with specific adherence to NASM39086 and NASM10971. Quality assurance requires compliance with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. The solicitation incorporates several federal regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for cybersecurity safeguarding. A price evaluation preference is available for SBA-certified HUBZone Small Business Concerns. Offers produced using additive manufacturing are ineligible for award. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE7M2-26-T-6811

Solicitation SPE7M2-26-T-6811, issued by the DLA Land and Maritime Nuclear Reactor Program, seeks quotes for 100 feet of structural angle material under NAICS 332111. The required material is steel rolled grade AH36U, conforming to MIL-S-22698 and ASTM-A6 Table A2.7 for equal leg L-shapes. The structural angle must have an overall height and width of 2.000 inches, a nominal flange thickness of 0.250 inches, and a length between 10 and 12 feet. This is designated as a critical application item and requires fine grain practice material. Delivery is required within 105 days, with the place of performance and delivery located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and marking requirements, including a Certificate of Quality Compliance (COQC) for each manufacturing lot and marking every 3 feet with the contract number, NSN, CAGE code, and material specifications. Packaging and preservation must adhere to ASTM A700 and MIL-STD-2073-1E, while marking must follow MIL-STD-129. Inspection and acceptance are set at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the iRAPT system for electronic COQC submission. The solicitation is open to full and open competition, with a price evaluation preference available for certified HUBZone small business concerns. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information is required.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2237

Solicitation SPE8E4-26-T-2237 is a fixed-price request for the procurement of 49 units of Steel Comp 302 metal bars. The required material must be cold-finished with a hexagon profile, measuring 0.562 inches across flats and 12 feet in length. All bars must be supplied in whole feet lengths only. The contract requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania, with a need ship date of March 1, 2027, and a required delivery date of March 4, 2027. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and ASTM A700, with specific continuous identification markings required on each unit of issue to avoid product rejection. The procurement also incorporates the Buy American Act, the Berry Amendment, and HUBZone price evaluation preferences. Inspection and acceptance will occur at the destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PIN, SHOULDER, HEADED

Solicitation # SPE7L4-26-T-6782

This contract, identified as solicitation SPE7L4-26-T-6782, is for the procurement of six headed shoulder pins with NSN 5315-01-434-1335 and part number 12366319-1. The requirement is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency. The items are associated with BAE Systems Land & Armaments L.P. and AMZ Alabama Inc. The contract specifies a delivery timeframe of 168 days after order, with a required delivery date of February 15, 2027, and a need ship date of March 9, 2027. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Anniston in Alabama. Compliance with MIL-STD-130N for identification marking and MIL-STD-129 for general marking is required, alongside adherence to DLA packaging requirements under RP001 and ASTM D3951 for commercial packaging.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

PLATE, STANCHION

Solicitation # SPE7M4-26-T-387E

Contract SPE7M4-26-T-387E is a solicitation issued by the Department of Defense DLA Land and Maritime Fluid Handling Division for the procurement of three stanchion plates, identified by NSN 2040-01-359-7917 and part number A2545-2 from Marathon Norco Aerospace, Inc. This critical application item is subject to strict material restrictions, including a prohibition on Class I ozone depleting chemicals and the intentional addition of mercury or mercury containing compounds, except where functionally required by NAVSEA specifications. The contract requires compliance with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and the protection of covered defense information. Delivery is specified as FOB Origin with an inspection and acceptance point at destination, specifically DLA Distribution San Joaquin in Tracy, California. The required delivery date is August 17, 2027, with a need ship date of March 9, 2027, and a delivery window of 168 days after receipt of order. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, with a preference for avoiding plastic wrapping and cushioning materials. The solicitation is managed under NAICS code 332111 and requires submissions via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2234

This contract, solicitation number SPE8E4-26-T-2234, is for the procurement of 214 feet of cold drawn, round steel bar, composition 4130, which is hard and tempered. The material must have a diameter of 0.563 inches and be supplied in whole feet lengths of 10, 11, or 12 feet, with a weight of 0.845 lb/ft. The procurement is governed by NAICS code 332111 and requires compliance with SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) provided with every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Detailed marking is required via stamping or stenciling, including the contract delivery order number, NSN, specification number, grade, alloy, manufacturer name, heat and lot number, and dimensions. Packaging and marking must adhere to MIL-STD-129, MIL-STD-163, and ASTM A700, with delivery scheduled for DLA Distribution Albany. The delivery timeline is 160 days after order, with a required delivery date of February 19, 2027.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Solicitation # SPE8E4-26-T-2235

Solicitation SPE8E4-26-T-2235 is a fixed-price request for the procurement of 55 feet of metal bar, specifically Steel Comp 4340, hot rolled, annealed, with a 3.000 inch diameter and lengths between 10 to 12 feet. The material must be supplied in whole feet lengths only. This requirement is managed by DLA Troop Support and is designated for delivery to the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of February 11, 2027, and a need ship date of March 1, 2027. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract mandates rigorous quality and marking standards, including the provision of a Certificate of Quality Compliance with every shipment and adherence to MIL-STD-129 for marking and ASTM A700 for preservation and packing. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are required on each unit of issue. Inspection and acceptance will occur at the destination. The procurement incorporates various federal regulations, including the Buy American Act and the Berry Amendment. Contractors must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. Technical compliance is governed by SAE AMS6415V and SAE AMS2806, and the contract includes specific requirements for safeguarding covered defense information and combating trafficking in persons.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CLAMP, SUPPORT (FORGING)

Solicitation # W519TC26Q8816

Solicitation W519TC26Q8816 is a request for quote from the Department of Defense for 30 forging support clamps as specified in drawing 25-73940. This acquisition is open to all vendors and is not set aside for small businesses. To participate, vendors must be active in the Joint Certification Program and provide their CAGE code when requesting the necessary technical drawings. The required delivery date for the items is December 8, 2026, with shipping destined for Rock Island Arsenal, Illinois. All submissions must include shipping costs and provide a Certificate of Conformance and a Certified Test Report. Payment will be processed through the Wide Area Workflow system via the Defense Finance and Accounting Service.

POSTED

DEADLINE

Manufacturing of Sleeve Bushings (NSN 3120-01-445-4645)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-27NY

This contract is a solicitation for the procurement of 33 sleeve bushings, identified by NSN 3120011712342 and part number 12322559. The order is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-27NY. Technical specifications are governed by basic drawing 19207 12322559 and associated quality assurance plans. The delivery is set for 171 days after order, with a need ship date of March 8, 2027, and a final required delivery date of June 29, 2027. Shipping is FOB Origin and destined for DLA Distribution Anniston in Alabama. Key requirements include adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, with a mandate to wrap each sleeve in neutral paper to prevent damage. Inspection and acceptance will occur at the origin.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-27UQ

This contract is a solicitation for the procurement of 22 sleeve bushings, identified by NSN 3120-01-445-4645 and part number NAS72-7-009. The item is source controlled, meaning it must be manufactured and tested according to specific limited rights data, and the government does not provide this data. Only vendors with existing access to the data or traceability to approved sources are eligible to quote. The contract requires adherence to various DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and inspection and acceptance at the point of origin. The delivery is set for 189 days after the order, with a required delivery date of April 19, 2027, and a need ship date of March 26, 2027. Shipments are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Key compliance requirements include the use of measuring and test equipment and the removal of government identification from non-accepted supplies. Item Unique Identification is not required for this specific order.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 13 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-713-7559)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS