This Subcontract opportunity from Department Of Defense was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Rubber or Elastomeric Seals Manufacturing

Closed

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E8-27-T-0381

Solicitation SPE8E8-27-T-0381 is a request for quotation issued by DLA Troop Support Construction and Equipment for the procurement of 625 desiccant cartridges. The required items are identified by NSN 4440015994929 and part number TA330-RC-2684 from AGM Container Controls Inc. Delivery is required within 82 days after order, with a need ship date of January 31, 2027, and an original required delivery date of February 17, 2027. The terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. This procurement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS 326220. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and domestic sourcing restrictions such as the Buy American Act.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1926

Solicitation SPE7M4-27-T-1926 is a Request for Quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 10 nonmetallic hoses, identified by NSN 4720-01-666-5283 and Parker-Hannifin part number EW356NX8000KEA-72. The acquisition falls under NAICS code 326220. Delivery is required within five days after order, with an original required delivery date of March 2, 2026. Shipping terms are FOB Origin, with inspection and acceptance occurring at the destination in Virginia Beach, Virginia. The contractor must ship via the fastest traceable means and is prohibited from using parcel post. The contract mandates strict adherence to technical and quality requirements, including the prohibition of Class I ozone depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Specific quality controls include the removal of government identification from non-accepted supplies and physical bare item marking. Administrative requirements include the use of Wide Area WorkFlow for invoicing and payment. Offerors must submit quotes via the DIBBS system by November 9, 2026, and ensure all representations and certifications are updated in the System for Award Management.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1983

Solicitation SPE7M4-27-T-1983, issued by the DLA Weapons Support Fluid Handling Division, is a small business set-aside for the procurement of 14 rolls of nonmetallic latex rubber tubing (NSN 4720-01-550-0975, Part Number 606R). This is a restricted source item requiring government design control activity approval. The material has a non-extendable shelf life of 36 months, and the contractor must provide specific shelf-life markings on all unit, intermediate, and exterior containers, as well as unpacked items, in accordance with MIL-STD-129 and Medical Marking Standard No. 1. Additionally, the use of Class I ozone-depleting chemicals is strictly prohibited. Delivery is required within 145 days after order, with a need ship date of April 4, 2027, and a final required delivery date of October 31, 2027. The shipping terms are FOB Origin, with the destination for inspection and acceptance being DLA Dist San Joaquin in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including mandatory heat treatment or kiln-dried heat treatment for all wood packaging materials per clause 52.247-9012. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-1034

Solicitation SPE7M4-27-T-1034, issued by the DLA Weapons Support Fluid Handling Division, is a request for quotations for one nonmetallic hose assembly, identified by NSN 4720015222068 and Mission Systems Davenport Inc. part number 3309243-2. The requirement is categorized under NAICS code 326220. Delivery is specified as FOB Origin with a need ship date of December 1, 2026, and an original required delivery date of April 30, 2027. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be palletized per RP001 and labeled according to MIL-STD-129. Key regulatory requirements include CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and compliance with the Buy American and Balance of Payments Program. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M4-27-T-3092

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-27-T-1158

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

44--MODULE,DRYER ASSEMBLY

Solicitation # SPE8E9-27-T-0492

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

AMS3195 RED SILICONE S

Solicitation # SPEFA5-27-Q-0024

Solicitation SPEFA5-27-Q-0024 is a small business set-aside procurement for Red Silicone Sponge Tube, part number V32052, conforming to AMS3195 REV H. The requirement is for 2.000 feet of tubing with dimensions of .630"+-.090" ID and 1.25"+-.125" OD. A critical procurement condition is that the material must be purchased in 100ft increments. Delivery is required within 20 days after order (ADO) to the DLA Fleet Readiness Center East in Cherry Point, North Carolina, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses, including requirements for Cybersecurity Maturity Model Certification (CMMC) and the Buy American program.

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-3064

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-27-Q-0139

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HOSE ASSEMBLY, NONMETAL

Solicitation # SPE7M0-27-T-1152

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-27-T-3077

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract entails the manufacture and delivery of 48,524.70 precision rubber or elastomeric seals with the National Stock Number 5330-01-485-6302, intended for use in mechanical or fluid systems. These seals must be produced using precision molding techniques to meet stringent quality and dimensional tolerances required for high-reliability applications in defense systems. Production must adhere to the logistics and quality control standards established by the Defense Logistics Agency, ensuring full compliance with DLA’s operational and supply chain protocols. The work falls under NAICS code 326220, classifying it as rubber product manufacturing, and is structured as a subcontract within the Department of Defense procurement framework. The contract was posted on July 13, 2026, and is administered by the Defense Logistics Agency. The seals are to be delivered in accordance with DLA’s logistics timelines and specifications, with performance requirements emphasizing consistency, material integrity, and traceability. The place of performance and primary point of contact details are not specified, but fulfillment obligations are tied to DLA’s centralized distribution and inventory management systems.

General Info

Manufacture and deliver 48,524.70 precision rubber seals to DLA standards for defense systems.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-25-T-368X.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAL, PLAIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 13

subcontract

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and delivery of 48,524.70 units of a plain seal (NSN 5330-01-485-6302) used in mechanical or fluid systems, requiring precision molding and compliance with DLA logistics standards.