This Subcontract opportunity from Department Of Defense was posted on August 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Rubber Seals Supply

Closed

Federal

Submission Closed08/31/2026, 01:00:00 PM EDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPEFA5-27-Q-0036

Solicitation SPEFA5-27-Q-0036 is a small business set-aside, firm fixed-price contract issued by the DLA Fleet Readiness Center for the procurement of one Hose Assembly, part number 4720-LN0015048. The item must be delivered to the destination in Cherry Point, NC, within 30 days after receipt of order. Inspection and acceptance will occur at the destination. The material does not have a shelf life requirement, and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must comply with ASTM D3951 and RP001, though the DLA Master List of Technical and Quality Requirements takes precedence. Marking and labeling must adhere to MIL-STD-129 and MIL-STD-130N(1). The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain foreign telecommunications and semiconductor products, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

HOSE ASSEMBLY AIR SERVICE 2"

Solicitation # SPMYM127Q4009

Solicitation SPMYM127Q4009 is a combined synopsis and solicitation issued by DLA Maritime Norfolk for the procurement of 150 new 2-inch air service hose assemblies for the Norfolk Naval Shipyard. This requirement is a Total Small Business Set Aside conducted under FAR Part 13 Simplified Acquisition Procedures. The specified hose assemblies must be 50 feet in length with a 2.00 inch inner diameter and 2.625 inch outer diameter, featuring a red synthetic rubber cover that is oil and mild acid resistant. Technical requirements include a minimum working pressure of 150 PSI, permanent swage type brass or stainless steel fittings with specific Hansen Quick Connect couplings, and a permanently crimped Dixon style W whipcheck safety cable. All delivered items must be new, palletized, and hydrostatically tested for 30 minutes with zero leakage, with written certification provided to the government. Each assembly must feature a layline with the manufacturer's name, working pressure, and requisition number in 1/2 inch high white indelible ink. Award will be based on the most advantageous offer, with technical capability and price serving as the most significant evaluation factors. Responses are due by November 12, 2026, and must include a formal price quotation, CAGE code, and business size. Payment will be processed exclusively through the Wide Area Workflow system.

DLA Maritime - Norfolk

POSTED

DEADLINE

Manufacturer of Preformed Packing (NSN 5330010427436)This subcontract involves the manufacture and supply of preformed packing components for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate within the Department of Defense. The contractor is responsible for fabricating packing units according to NSN 5330010427436 specifications, utilizing specialized elastomers or polymers while ensuring that components remain unbent during the production process. Key requirements include providing a certification of conformance to the specified NSN standards and maintaining strict compliance with the safeguarding of covered defense information. The contract falls under NAICS code 326220 and requires the delivery of finished preformed packing units.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the supply of one nonmetallic hose assembly meeting NSN 4720-01-731-8104 specifications. The selected supplier is responsible for manufacturing or sourcing the assembly while ensuring that no Class I ozone depleting chemicals are used in the product. Additionally, the contractor must maintain strict supply chain traceability documentation in accordance with DLAD Procurement Notes #C03. The project falls under NAICS code 326220 and will be performed at Fort Leonard Wood, ZIP code 65473. Interested parties must respond by November 23, 2026, following the solicitation posted on November 12, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Special Shaped Section Nonmetallic SealsThis subcontract opportunity is for the manufacture of 380 nonmetallic special shaped section seals, specifically NSN 5330-01-459-5062, to support prime contractors under the DLA Weapons Support Strategic Acquisition Program Directorate. The selected manufacturer must produce the seals according to precise technical drawings and guarantee that all materials are free of asbestos and Class I ozone-depleting chemicals. Each delivery must be accompanied by a Certificate of Conformance to verify compliance. The contract is designated as a Total Small Business Set-Aside under NAICS code 326220. To be eligible, providers must maintain a quality system certified to SAE AS9003 or ISO 9001 standards. Interested parties must submit their responses by November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturer of Plain Encased Seals (NSN 5330-00-891-7826)This subcontract opportunity is for the manufacture and supply of plain encased seals under NSN 5330-00-891-7826 to support prime contractors for the DLA Weapons Support Strategic Acquisition Program Directorate. The selected provider must ensure all products are manufactured to exact specifications, with sampling and testing conducted according to MIL-STD-1916 or ASQ H1331. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-DTL-117, MIL-STD-129, and MIL-STD-130N. This is a total small business set-aside under NAICS code 326220. Due to the nature of the Department of Defense project, the contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance for cybersecurity. Interested parties must submit their responses by November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PRI QML/QPL Electrical Insulation Sleeving SupplyThis subcontract involves the manufacture or distribution of specialized electrical insulation sleeving, specifically NSN 5970-01-230-2978, for prime contractors supporting DLA supply contracts. The supplier must maintain PRI QML/QPL accreditation and adhere to strict military standards for sampling, marking, and packaging, specifically MIL-STD-1916 or ASQ H1331, MIL-STD-129, and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with the Buy American Act and the Berry Amendment. The primary objective of the contract is the delivery of one spool of accredited sleeving to the USS CARNEY DDG 64. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the requirement falls under NAICS code 326220. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Plain Encased Seals (NSN 5330-006145764)This subcontract involves the manufacture and supply of 247 Plain Encased Seals for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The units must be produced according to NSN 5330-006145764 specifications, with a strict requirement that materials used are asbestos-free and contain no Class I ozone-depleting chemicals. Additionally, all items must feature identification marking in compliance with MIL-STD-130N. To be eligible for this contract, the provider must hold CMMC Level 2 Certification. The project falls under NAICS code 326220 and is managed by the Department of Defense. The response deadline for this opportunity is November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturer of Plain Encased Seals (NSN 5330-00-725-1511)This subcontract involves the manufacture of 362 plain encased seals for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate within the Department of Defense. The contractor is required to fabricate these seals to the exact technical specifications for NSN 5330-00-725-1511, ensuring that all products are strictly asbestos-free and compliant with the DLA Master List of Technical and Quality Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220. Interested parties must submit their responses by November 27, 2026, following the posting date of November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Critical Application Component Manufacturing (P/N 12819-1)This subcontract involves the manufacture and supply of 20 critical application items, specifically part number 12819-1 and NSN 5330-01-227-6417, for prime contractors under DLA supply contracts. Managed by the Department of Defense through the DLA Weapons Support Strategic Acquisition Program Directorate, the project requires components to be produced entirely free of asbestos and UV-sensitive compatible materials while adhering to strict Critical Application Item quality standards. The contract specifies a non-extendable shelf life of 180 months, with a requirement that at least 85 percent of this shelf life remains upon delivery. The opportunity is categorized under NAICS code 326220 and was posted on November 12, 2026, with a response deadline of November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Metallic Hose Assembly SupplierThis subcontract involves the supply of 95 metallic hose assemblies for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Opns Engines. The supplier is responsible for manufacturing or sourcing assemblies that strictly adhere to NSN 4720-01-538590-6, with all marking and packaging performed according to MIL-STD-129 standards. A critical requirement for this engagement is the certification of domestic origin for the provided materials. The project falls under NAICS code 326220 and is managed by the Department of Defense. Performance of the contract will take place in Barstow, California. Interested parties should note the response deadline of November 23, 2026, following the posting date of November 12, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Sleeve Seal Manufacturing/Supply (NSN 5330-00-895-7088)This subcontract, issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate, requires the manufacture or procurement of 70 sleeve seals (NSN 5330-00-895-7088). The contractor must ensure all seals are free of asbestos and Class I ozone-depleting chemicals in accordance with RA001 requirements. Delivery is specified as FOB Origin. Strict packaging and marking standards apply, requiring units to be housed in medium-duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117, Type II, Class C, Style 1. Additionally, all shipments must be marked according to MIL-STD-129 and MIL-STD-130N. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days

AI Contract Overview

This subcontract, issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, involves the manufacture and supply of precision rubber seals. The components must be produced in strict compliance with military specifications and marked according to MIL-STD-129 standards. Delivery for these items is established as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The opportunity was posted on August 19, 2026, with a response deadline of August 31, 2026. Classified under NAICS code 326220, the contract focuses on specialized rubber product manufacturing to support military vehicle operations.