Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Sheet Metal Fabrication of Duct Assembly

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the precision fabrication of a complex duct assembly identified by NSN 1660-01-718-5087, requiring the use of aerospace-grade materials and strict adherence to technical data specifications. The scope includes forming, welding, nondestructive inspection, and finishing operations, all conducted under rigorous quality control protocols to meet military and aviation standards. The work is performed as a subcontract under the Department of Defense’s Defense Logistics Agency, with the North American Industry Classification System code 332322 indicating specialized metal fabrication services. The contract was posted on July 20, 2026, and is tied to the overarching procurement vehicle SPE4A122G0005, with delivery under SPE4A726F8785. Although specific performance location and point of contact details are not provided, the requirement demands full compliance with defense-grade manufacturing practices, including traceability of materials and processes, documentation of inspections, and adherence to controlled technical data. The assembly is critical to defense systems, necessitating high reliability and consistency across production batches, with no tolerance for deviation from approved specifications.

General Info

Fabricate aerospace-grade duct assembly per military specs under DLA subcontract, NSN 1660-01-718-5087.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a complex duct assembly (NSN 1660-01-718-5087) from aerospace-grade materials, including forming, welding, inspection, and finishing under strict technical data controls.

Similar Contracts

Same NAICS industry code

Fence Post Supply and ReplacementThe contract involves the supply and replacement of all fence posts using materials that match the existing type in both specification and durability, ensuring seamless integration and long-term performance. All replacements must comply with established material standards to maintain structural integrity and aesthetic consistency with the current fence system. The work is classified as a subcontract under NAICS code 332322, indicating it relates to metal framing and structural metal work. The City of Port Arthur in Texas is the issuing agency, with responses required by August 5, 2026, at 8:00 PM. The solicitation was posted on July 21, 2026, and further details can be accessed through the provided public procurement link.

City of Port Arthur

POSTED

DEADLINE

Fencing Materials Supply (Chain-Link, Woven Wire, or Metal Panels)

Department of Transportation

POSTED

DEADLINE

Stainless Steel Moldboard FabricationA 96-inch wide moldboard with a maximum height of 31 inches is to be fabricated from 304 stainless steel for use in a reversible, quick-connect snowplow system. The design must include the integration of eight steel ribs for structural reinforcement and a 2-inch cross tube to ensure durability and proper load distribution under heavy snow conditions. The material specification ensures corrosion resistance and long-term performance in harsh winter environments. The contract is categorized as a subcontract under NAICS code 332322 and was posted by the Texas Department of Transportation with a response deadline of July 24, 2026. All work must be completed to meet the technical requirements for seamless integration into the specified plow system, with performance expected to support reliable, efficient snow removal operations.

Texas Department of Transportation

POSTED

DEADLINE

Aluminum Mechanic Body Fabrication and InstallationThe contract involves the custom fabrication and structural installation of an 11-foot corrosion-resistant aluminum mechanic body designed for integrated tool storage and work surfaces, to be mounted on a chassis. The component must be built to withstand demanding field conditions with durability and precision, ensuring functionality for maintenance and repair operations. All structural elements, storage compartments, and work surfaces must be seamlessly incorporated into the body’s design, meeting stringent quality and safety standards for long-term performance. The solicitation was posted on July 20, 2026, with a response deadline of August 20, 2026, and is classified as a subcontract under NAICS code 332322, indicating a focus on metal fabrication. The place of performance is designated for South Street in Hinsdale, Massachusetts, with a zip code of 01235, and the awarding entity is TOH02 - Town Hall under the Massachusetts agency. While no set-aside type or point of contact is specified, bidders must ensure full compliance with the technical specifications and installation requirements outlined in the full solicitation, as failure to meet these standards could result in disqualification or contract breach.

TOH02 - Town Hall

POSTED

DEADLINE

Industrial Control Cabinet (CIC) Assembly & SupplyDallas Area Rapid Transit is seeking a subcontractor to supply or assemble a custom or pre-fabricated industrial control cabinet designed to house the HMI and associated components, with environmental ratings compliant with NEMA or IP standards suitable for transit or heavy industrial environments. The cabinet must be robust enough to withstand operational conditions typical in public transportation systems, ensuring reliable performance under varying temperatures, dust, moisture, and vibration. The opportunity is open under NAICS code 332322 and is posted for response by July 27, 2026, with all proposals required to meet technical specifications for design, materials, and certification prior to delivery. The contract does not specify a set-aside classification and is open to qualified vendors without geographic restrictions, though performance is expected to support DART’s infrastructure needs. All submissions must be submitted through the designated online portal prior to the deadline.

Dallas Area Rapid Transit

POSTED

DEADLINE

Digital Wayfinding Signage Supply and MountingThe contract is for the supply, structural mounting, and electrical connection of digital overhead signage to support zone, aisle, and space-level parking guidance within a facility managed by Texas A&M University. This subcontract involves providing fully functional digital signage systems designed to improve wayfinding and parking efficiency, with all components requiring secure structural installation and proper electrical integration to ensure reliable operation. The work must comply with technical specifications for durability, visibility, and connectivity to support real-time parking data displays. The solicitation was posted on July 20, 2026, and proposals are due by September 30, 2026, with the North American Industry Classification System code 332322 indicating the scope pertains to other structural metal manufacturing. The place of performance and exact location details are not specified, but work is expected to occur at a Texas A&M University campus or associated facility. Interested parties can access additional details through the provided Texas SmartBuy portal link.

Texas A&M University

POSTED

DEADLINE

Manufacture and Delivery of Access Cover (NSN 5340-01-181-1645)A subcontract has been awarded for the precision manufacturing, quality assurance, packaging, and delivery of a single military-specification access cover designated by NSN 5340-01-181-1645. The item must fully comply with MIL-STD-2073-1E standards for military packaging and adhere to Special Packaging Instructions P5-59-364, Revision D, ensuring it meets rigorous defense requirements for durability, protection, and handling. Delivery is specified as FOB Destination to Fort Hood, Texas, meaning the contractor assumes full responsibility for transportation, risk, and costs until the item is physically received at the designated military location. The work falls under NAICS code 332322, indicating classification within the forgings and stampings manufacturing sector, and is being managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 20, 2026, and is tracked under the award number SPE7M426P4003.

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Fabrication of Structural BracketThe contract calls for the precision fabrication of a structural bracket meeting rigorous military specifications, encompassing full manufacturing processes from material selection through forming, machining, welding, and final finishing. Every stage must adhere to strict quality standards with complete traceability throughout production to ensure compliance with defense requirements. The work is to be performed at Tinker Air Force Base, Oklahoma, under a subcontract arrangement, and all materials and procedures must align with the applicable military and industry standards governing such components. The solicitation, issued under NAICS code 332322 for fabricated metal product manufacturing, was posted on July 20, 2026, with a firm response deadline of July 28, 2026. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating a critical defense logistics context. While no set-aside designation or point of contact is provided, the location and agency confirm the scope is tied to military aircraft or systems maintenance and support operations at Tinker AFB. Full documentation, adherence to quality control protocols, and on-time delivery are essential to meet contractual obligations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

U.S.-Based Bearing Component SupplyThe contract seeks the supply of domestically manufactured bearing components including races, rollers, and retainers to meet a minimum 50 percent U.S. and Canada cost content requirement, ensuring compliance with domestic sourcing regulations. The components must be produced within the United States or Canada to satisfy the specified local content threshold, and the subcontract is aimed at supporting defense-related supply chain needs under the Department of Defense. The solicitation is open to qualified suppliers with the ability to deliver high-quality bearing parts consistent with military or defense industry standards. The opportunity is listed under NAICS code 332322, which pertains to bearing and gear manufacturing, and has a response deadline of July 28, 2026. Performance is required at Hill Air Force Base, Utah with ZIP code 84056-5734, and the contracting activity falls under the ASC Commodities Division of the Department of Defense. All offers must be submitted through the DIBBS platform prior to the deadline to be considered for award, and failure to meet the domestic cost requirement will result in non-compliance. This subcontract is part of a broader effort to sustain critical defense infrastructure through secure, locally sourced mechanical components.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Stainless Steel Fabrication & Enclosure Assembly

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Electrical Backshell Manufacturing and SupplyThe contract entails the manufacture and supply of 55 precision-machined metal electrical shielding backshells identified by NSN 5935011305204, fully compliant with military specifications to ensure performance under demanding operational conditions. The work is classified as a subcontract under the NAICS code 332322, which encompasses other miscellaneous fabricated metal product manufacturing, and is being executed for the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, with no set-aside provisions indicated, meaning the contract is open to all eligible vendors regardless of business size or ownership status. Performance location details are not specified, but delivery and compliance are expected to meet the stringent quality and technical requirements dictated by military standards. The award is accessible via the DIBBS portal under contract number SPE7M026V4742, and all deliverables must be certified to uphold interoperability, durability, and electromagnetic shielding integrity for critical defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Metallic Nonskid Tread (P/N: 06-17156-016)The contract pertains to the manufacture and delivery of metallic nonskid treads with part number 06-17156-016, engineered to meet stringent Defense Logistics Agency standards for use in defense applications. The initial order specifies 13 units, with an anticipated potential for additional orders up to a total value of $250,000, indicating scalability based on operational needs. The work falls under NAICS code 332322, which classifies it within the forging and stamping industry, emphasizing the specialized metalworking and precision manufacturing required. Though the solicitation number is not provided, the contract is identified as a subcontract and was posted on July 20, 2026, under the Department of Defense’s Defense Logistics Agency, ensuring adherence to federal procurement protocols. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system via a designated link for official recordkeeping and tracking.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

CAP, AIRThis contract, issued by the Defense Logistics Agency under solicitation number SPE8E5-26-T-3638, pertains to the procurement of one unit of material identified by NSN 3433-01-158-0436, with a required delivery within five days of award. The item is to be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including specific hazardous material handling per FED-STD-313 and TQ requirement IP025 if applicable. Mercury and mercury-containing compounds are strictly prohibited except for defined functional uses such as batteries, fluorescent lights, sensors, or reagents approved by NAVSEA, with additional containment requirements for portable devices. The shipment is to be sent to a designated SSA location in Kaiserslautern, Germany, with transportation governed by DLA procedural notes C19 and C20. The contract includes restrictions on covered defense information and mandates compliance with supplier documentation standards including Source Approval Requests and removal of government identification from non-accepted items. The original required delivery date is June 11, 2025, and the point of contact is Ira Hedgepeth at DLA.

Welding and Soldering Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

HEATER, FLUID, INDUSTThis contract is for the procurement of one fluid heater, industrial model, identified by NSN 4420014299920 and part number 5-131-08-030-002 from Fluid Handling LLC, with a total quantity of ten units to be delivered within five days of award. The item is covered under solicitation SPE8E8-26-T-4771, which is a total small business set-aside under NAICS code 332410, and is managed by the Defense Logistics Agency. Delivery is FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all packaging must be marked and labeled appropriately with the specified unit of issue and quantity per unit pack. The contract explicitly prohibits intentional addition of mercury or mercury-containing compounds to the hardware or its components, with narrow exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and maintain a secondary containment barrier per NAVSEA 5100-003D. Shipment is directed to the U.S. Army SSA W58MKR facility in Zaczernie, Poland, and must follow DLA procedures C19 and C20 for transportation and first destination transfer. The item must be delivered by July 22, 2026, and is associated with RDD code E and project code 3BI TP 1. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. Contract data indicates the primary point of contact is Alexis Selby, with the solicitation posted on July 21, 2026, and responses due by August 3, 2026. The purchase request number 7017559823 references this line item, with unit price and total cost not itemized but implied through total quantity and contractual obligations. Government use identifiers and distribution codes are provided for internal tracking purposes.

Power Boiler and Heat Exchanger Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, INSTRUCTIONThe contract pertains to the procurement of two instructional plates identified by NSN 9905-01-515-8353 under solicitation SPE8E6-26-Q-0579, with a firm delivery deadline of 90 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Drawings associated with this item are accessible only during the open solicitation period via the DIBBS portal. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless otherwise directed. Compliance with zero defect acceptance is mandatory unless explicitly waived. Technical data associated with this item is subject to export control under ITAR or EAR, and its disclosure to foreign persons, including within the United States, is strictly prohibited without prior authorization. Access to controlled technical data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. The point of contact for the solicitation is Kathleen Selover, reachable via email and phone listed in the contract data.

Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

MARKER, IDENTIFICATIONThe contract pertains to the procurement of identification markers, specifically for a Type I shelf-life item with a 12-month non-extendable shelf life, under the Defense Logistics Agency’s procurement requirements. The item must be supplied by either LABELMASTER CO. or AMERICAN LABELMARK COMPANY with the respective part numbers PL-18 or HML13, and must comply with MIL-STD-129 for labeling, including shelf-life markings in calendar quarter and year format, with the expiration date set exactly one year from the cure date. At least 85% of the item’s shelf life must remain at the time of delivery. Packaging must conform to MIL-STD-2073-1E, with clear marking specifications and avoidance of plastic materials for wrapping, cushioning, or dunnage whenever feasible. The unit of issue is RO (1,666 feet), with a total quantity of one RO required, and delivery is due within 20 days of contract award, FOB origin. Inspection and acceptance occur at destination, and no variance in quantity is permitted. The item is destined for W8002F, a military facility located in Comayagua, Honduras, and must be shipped via traceable means, with parcel post prohibited. The delivery address, mark for address, and freight shipping address are identical, and the point of contact is Jennifer Roome of the Defense Logistics Agency. The solicitation number is SPE8E6-26-T-3765, with an original required delivery date of July 17, 2026, and responses are due by August 3, 2026. Technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, and compliance with all applicable codes and standards including MIL-STD-129 is mandatory. The contract includes government use codes, project information, and a National Stock Number of 7690-01-242-4556, with the North American Industry Classification System code 323117 identifying the industry standard for the item.

POSTED

about 14 hours ago

DEADLINE

TANK, OIL DRAIN, COMPThe contract is for one oil drain tank, part number 366-20263 and NSN 4130-01-230-8549, under solicitation SPE8E8-26-T-4770, issued by the Defense Logistics Agency. Delivery is required within five days of award, with shipment destined for the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item must be furnished FOB origin, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using approved methods and materials, with strict instructions to avoid plastics where possible. The item must not contain intentional mercury or mercury compounds except in specific permitted applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents, and any portable mercury-containing devices must be shock-proof with secondary containment per NAVSEA 5100-003D. The contract references DLA’s Master List of Technical and Quality Requirements, with compliance controlled by the revision in effect on the solicitation or award date. A unique shipment identifier RDD 777 requires tracking via the fastest traceable means and prohibits parcel post. The technical data package is not approved by DLA Troop Support, and no request for it should be submitted. The contract includes specific freight and parcel post addresses, a government-only identification code, and a required delivery date of July 20, 2026, with a response deadline of August 3, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

DECONTAMINATING APPThis contract is for the procurement of one unit of a decontaminating apparatus identified by NSN 4230-01-593-2297 and part number T00416-5083, classified as a commercial item with a non-extendable shelf life of 12 months as a Type I (Code H) item. The item must comply with strict material restrictions including the absolute prohibition of asbestos per FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in specified functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and certain chemical reagents defined by NAVSEA, with portable mercury-containing devices required to have shockproof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. The item is designated as a critical application item and must be packaged in compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, including the special marking code 32 for shelf life, with palletization adhering to DLA packaging requirements. Delivery is required FOB origin within 20 days of contract award, with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. The item must be delivered to the Distribution Management Office at Building 1710, Iwakuni, Japan, under contract SPE8E6-26-T-3774, with the original required delivery date set for July 17, 2026. Compliance with DLA’s Master List of Technical and Quality Requirements, including specific references such as RP001, RQ011, RD003, and RC001, is mandatory, along with adherence to all documentation and source approval protocols. Transportation is governed by DLAD procedural notes C19 and C20, and all markings, packaging, and unit of issue must conform to specified DoD and ANSI X12 standards. The contract is managed under a federal procurement system with government-only access details and is part of a larger expeditionary system requirement supported by HDT Expeditionary Systems Inc.

Plate Work Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThis contract specifies the procurement of six calcium maintenance-free shelf-life Type I batteries with a non-extendable 12-month shelf life, supplied by East Penn Manufacturing Co. under part number 11U1L and NSN 6140017178541. The batteries must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including MIL-STD-129 marking and palletization standards. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned verification levels or AQLs as defined. Mercury or mercury-containing compounds are strictly prohibited except in functional applications like batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents. The items will be delivered FOB destination within 20 days of contract award to Camp Pendleton, California, with no quantity variance allowed and inspection and acceptance also occurring at destination. Shipment must use traceable freight methods, not parcel post, and special marking codes are not required. The contract is issued under solicitation SPE7L7-26-T-4391 with a required delivery date of July 13, 2026, and response deadline August 3, 2026, under NAICS code 335910 and managed by the Defense Logistics Agency.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

INNER TUBE, PNEUMATIThis contract is for the procurement of four pneumatic inner tubes, part number 323111, with NSN 2610-01-611-7825, supplied by Carlisle Tire & Wheel Co under solicitation SPE7L7-26-T-4385. The item is classified as TYPE I with a non-extendable 60-month shelf life, and the use of any Class I ozone-depleting chemicals is strictly prohibited, requiring approved substitutes if necessary. Delivery is required within 20 days to Ellsworth Air Force Base, South Dakota, FOB destination, with inspection and acceptance occurring upon arrival and no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with special marking indicating Type I shelf-life status, and palletization adhering to DLA packaging requirements. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with zero non-conformances required unless otherwise specified. The contract references DLA’s Master List of Technical and Quality Requirements for all applicable technical and quality standards. Shipment must be sent via the fastest traceable means, excluding parcel post, and all documentation aligns with DoD unit of issue and procurement protocols. The original required delivery date is July 17, 2026, and the point of contact is Molly Teegarden of the Defense Logistics Agency.

Tire Manufacturing (except Retreading)

POSTED

about 14 hours ago

DEADLINE

BATTERY POWER SUPPLYThis contract specifies the procurement of a sealed lead acid battery with a Type I shelf life of 12 months, non-extendable, classified as a commercial off-the-shelf item with available catalog data for evaluation of alternatives. The battery must comply with strict hazardous material regulations, prohibiting intentional addition or direct contact of mercury or mercury-containing compounds, except for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a second boundary of containment as defined by NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. Packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 32 indicating Type I shelf life, and palletization governed by DLA packaging requirements. The item is to be delivered FOB origin within 10 days, with no quantity variance allowed, inspected and accepted at destination. Shipment must use the fastest traceable means, excluding parcel post, to the designated military address in Carlisle, PA, with no delivery date earlier than July 10, 2026. The contract is issued under solicitation SPE7L7-26-T-4383 by the Defense Logistics Agency and identifies the NSN 6130-01-418-5230 for a single unit at a total price of one dollar.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 14 hours ago

DEADLINE

FLOODLIGHT, ELECTRICThe contract is for the procurement of 10 electric floodlights with NSN 6230-01-717-5158, sourced from BAYCO PRODUCTS INCORPORATED DBA 3GLY4 under part number NSR-2166R. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s mandatory packaging requirements, specifically RP001 and MIL-STD-129, superseding ASTM D3951 if applicable. Hazardous material handling follows FED-STD-313 and TQ requirement IP025 if applicable. Items must be shipped via traceable means, excluding parcel post, to the specified delivery point at 7105 NW 70th Ave, Johnston IA 50131-1824, with clear labeling per government directives including traceable markings and the designated military freight code. The product must meet all technical and quality standards enumerated in the DLA Master List of Technical and Quality Requirements, referenced in the solicitation, and documentation requirements for source approval are integral to compliance. The solicitation number is SPE8E7-26-T-3368, with a response deadline of August 3, 2026, and the original required delivery date is July 17, 2026. Contract administration is managed by the Defense Logistics Agency, with Kelly Mitchell as the primary point of contact.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThe contract specifies the procurement of 6140-01-457-4206, a 12-volt wet-charged lead acid battery classified as corrosive by the Department of Transportation and shipped under the name "Battery, Wet, Filled with Acid." It is a Type I shelf-life item with a strict non-extendable 3-month shelf life, requiring packaging and marking in compliance with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 32 for shelf-life designation. All shipments must adhere to DLA packaging requirements RP001 and hazardous materials packaging standard IP025, using only U.S. Department of Transportation-compliant 4G UN-certified fiberboard containers; commercial packaging is strictly prohibited. The contractor must ensure staff are trained and certified per Title 49 CFR for handling, marking, labeling, and documenting hazardous materials, and must include valid Safety Data Sheets confirming regulatory compliance. The product must not contain intentionally added mercury except for functional uses in batteries, and portable fluorescent lamps or instruments containing mercury must have shockproof design and secondary containment per NAVSEA standards. The contract mandates a Firm Fixed Price structure with zero tolerance for quantity variance, delivery within 60 days after award, and inspection and acceptance occurring at the destination. Three separate deliveries of two batteries each are required, shipped to distinct U.S. military addresses in Pennsylvania and Puerto Rico, with shipments traceable and never via parcel post. Each delivery has an associated RDD and project code with unique routing identifiers, and the batteries are sourced from East Penn Manufacturing Co. under part number 7T31. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise specified, and verification levels for attributes are fixed as VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contract explicitly excludes any non-compliant materials or packaging, enforcing full adherence to federal hazardous materials regulations and government-specific logistics protocols.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE