This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Sleeve Bushing Manufacturing

Closed

Federal

Submission Closed07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPMYM326Q8023

This solicitation, identified as SPMYM326Q8023, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information posted exclusively on SAM.gov. The requirement is for two Ball, Screw Assemblies, specifically OEM part number B15125C Rev-D manufactured by Beaver Aerospace & Defense Inc., furnished as a fully machined and assembled unit in compliance with proprietary technical data. This is a sole-source procurement due to the proprietary nature of the drawing and OEM status, and quotations from any other manufacturer will be rejected outright. Offerors must be registered and active in SAM.gov, possess a valid CAGE code, and submit complete responses via email to sam.j.aiguier.civ@us.navy.mil and DLA-KME-QUOTATIONS@DLA.MIL by the deadline of July 28, 2026, at 12:00 PM EST. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with technical acceptability determined by strict adherence to specifications, including the requirement for quality certifications, test results, and supply chain traceability documentation. Responsibility screening will be conducted through PPIRS and FAR 9.104 criteria. All respondents must complete and include with their offer the signed Security Agreement for Protection of Naval Nuclear Propulsion Information and DD Form 2345 to obtain proprietary drawings. Proposals must include pricing, FOB Destination terms, business size under NAICS 332991, and payment preference between Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). If GCPC is selected, a receiving report must be submitted via WAWF. Offerors not the original manufacturer must disclose the manufacturer’s name, location, and business size. The contract incorporates a comprehensive array of FAR, DFARS, DLAD, and local clauses related to cybersecurity (including NIST SP 800-171 and DFARS 252.204-7012), prohibitions on covered telecommunications equipment, trafficking in persons, labor standards, environmental controls, Buy American restrictions, and export control requirements. Items must be delivered to Kittery, Maine, by September 28, 2026, with inspection and acceptance occurring at destination per QA-4 terms and constructive acceptance extended to 45 calendar days. Packaging must conform to

DLA Maritime - Portsmouth

POSTED

DEADLINE

Solicitation # N0010426QYAC0

This solicitation is for the manufacture of a bearing under a small business set-aside, with awards limited to government-approved sources only. Offerors must be authorized distributors of the original manufacturer and must submit proof of authorization along with their proposal. The requirement is for a firm fixed price per CLIN, with tiered pricing not allowed. Proposals must include both non-price factors—capacity, delivery, and recent past performance within the last three years—and price on a single document, with non-price factors weighted more heavily than cost. Past performance must relate to items of similar scope, complexity, and magnitude and is limited to three contracts. The bearing must meet specific design criteria identified by Cage Code and reference numbers, and is subject to MIL-STD-130 Rev N marking requirements. Any design, material, or part number changes must be approved in writing by the NAVICP-MECH Contracting Officer and categorized using defined change codes. The product must be mercury-free and free from mercury contamination, with strict provisions prohibiting its use in manufacturing, assembly, or testing unless explicit written approval is granted. Contamination testing protocols are detailed, including air sampling for vapor levels above 0.01 mg/cu meter. Quality assurance responsibilities rest with the contractor, who must maintain inspection records for at least 365 days after final delivery. Packaging must comply with MIL-STD-2073 and the contract schedule. All documents and drawings provided by the Navy include distribution statements governing access, with restrictions ranging from unlimited public release to DoD-only use. Only approved sources may compete, and those not already approved must submit documentation per the NAVSUP WSS Source Approval Brochure. The closing date for proposals is August 17, 2026, at 2:00 PM EST, and submissions must be emailed to Helen Carmelo at the designated address. Failure to meet any mandatory requirement will disqualify the proposal.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

31--BEARING,ROLLER,TAPERED

Solicitation # SPE4A626T21DQ

POSTED

DEADLINE

Solicitation # SPRMM126QKH41

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0010426QED13

The contract solicitation pertains to the procurement of 20 units of ball bearing, NSN 1H-3110-016607743-X3, with technical data package version 002, to be delivered to W62G2T, W1A8 DLA DIST SAN JOAQUIN in Tracy, California. The government holds unrestricted rights to all technical data, with no limitations on engineering, tooling, or manufacturing, positioning this item as eligible for full and open competition under A/RMSC codes 1 or 2. The acquisition is fully set aside for small business concerns as defined under FAR clause 52.219-6, with the specific set-aside category—such as HUBZone, Service-Disabled Veteran-Owned, Economically Disadvantaged Women-Owned, Women-Owned Small Business, or Historically Black College or University and Minority Institution—to be determined and specified in the formal solicitation through the inclusion of the corresponding FAR or DFARS clause. The solicitation number is N0010426QED13, posted on August 5, 2026, with responses due by September 21, 2026. The procurement is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with the primary point of contact being Melissa A. Furness at the Mechanicstown, Pennsylvania office. All relevant military specifications, standards, and Qualified Products Lists can be accessed via the ASSIST-Online database at quicksearch.dla.mil or obtained through the DODSSP system, with documents not available online orderable via the DODSSP Shopping Wizard or by contacting the DODSSP Help Desk.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

31--BEARING,ROLLER,CYLI

Solicitation # SPE4A6-26-T-21AM

ASC COMMODITIES DIVISION

POSTED

DEADLINE

The Dalles Dam, Generator Thrust Bearing Refurbishment

Solicitation # W9127N26QA115

POSTED

DEADLINE

BEARING, ROLLER, NEED

Solicitation # SPE4A6-26-T-20SX

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, PLAIN, SELF-

Solicitation # SPE4A6-26-T-20SG

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, BALL, ANNULA

Solicitation # SPE4A6-26-T-20ZF

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-20SU

ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, ROLLER, AIRFRAM

Solicitation # SPE4A6-26-T-20WU

ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract pertains to the manufacture of precision bushing and sleeve components in accordance with Department of Defense and DLA specifications, encompassing all phases from initial machining and heat treatment to rigorous quality control, secure packaging, and final delivery. Production must meet stringent military standards to ensure functionality, durability, and reliability under operational conditions, with the work scheduled to be performed at a designated facility in Jacksonville, Florida, identified by the zip code 32212-0103. The contract is classified as a subcontract under NAICS code 332991, indicating it involves other fabricated metal product manufacturing, and is issued by the ASC Commodities Division under the broader Department of Defense. All proposals must be submitted by the deadline of July 24, 2026, with the solicitation posted on July 16, 2026, to ensure timely evaluation and award.

General Info

Manufacture precision bushings and sleeves per DoD specs in Jacksonville, FL, by July 24, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-07CV.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 24

Deadline has passed

Submission Closed

07/24/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture of precision 'BUSHING, SLEEVE' components per DLA and military specifications, including machining, heat treatment, quality control, packaging, and delivery.