Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Stud Manufacturing – Plain Studs (Machined Fasteners)

Active

Federal

Response Deadline07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of 168 units of 'STUD, PLAIN', a machined fastener component, adhering strictly to technical drawings and Department of Defense quality standards. Production must meet precise dimensional and material specifications to ensure compatibility and performance in military applications, with all work required to comply with established DoD manufacturing and inspection protocols. The items are subject to rigorous quality control and must be delivered in full compliance with defense procurement regulations to ensure readiness and reliability in operational environments. The subcontract is posted under the NAICS code 332722, indicating it falls within the category of Screw, Nut, and Bolt Manufacturing, and is managed by the ASC Commodities Division of the Department of Defense. Performance is required at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Subcontractors must submit responses by the deadline of July 22, 2026, at 5:00 PM Eastern Time, through the official DIBBS portal. All participating vendors are expected to demonstrate capacity for high-precision machining, consistent quality assurance, and timely delivery within the specified timeline to fulfill this defense-related requirement.

General Info

Manufacture and deliver 168 plain studs to DoD standards by July 22, 2026, in New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineJul 22

Submission deadline

Response Deadline

07/22/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 168 units of 'STUD, PLAIN' per technical drawings and DoD quality standards.

Similar Contracts

NUT, PLAIN, HEXAGONThe contract specifies the procurement of 43 plain hexagon nuts with NSN 5310-01-178-1654 under solicitation SPE7L5-26-T-4288, which is a total small business set-aside with NAICS code 332722. Delivery is required within 259 days from award, and responses must be submitted by July 17, 2026. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging, identification, and removal of government markings must follow DLA standards, including RQ011 and RQ017. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and reagents approved by NAVSEA; portable mercury-containing items must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated, and manufacturers may choose attribute or variable inspection methods unless the contract dictates otherwise. The point of contact is Christopher Walker with the Department of Defense, and performance is to occur in New Cumberland, PA.

LAND SUPPLIER OPNS ENGINES

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, SOCKET HEADThis contract specifies the procurement of 2 units of a socket head cap screw identified by NSN 5305-01-721-9309 and part number 11518861 from GM DEFENSE LLC, classified as a commercial off the shelf item. Delivery is required within five days of contract award, with goods to be shipped FOB origin and inspected at the destination. The unit of issue is each, with no variance allowed in quantity, and the total price is $2.00. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements and the shipment must be sent via traceable means, explicitly excluding parcel post, to the delivery address at Fort Benning, Georgia. The item is subject to strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification but do not reduce product performance standards; alternative chemicals require approval unless explicitly authorized. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on acquisition type. The contract remains active under solicitation SPE7L1-26-T-833Y, with a required delivery date of July 14, 2026, and a designated point of contact at DLA for inquiries.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEADThe contract pertains to the procurement of six hexagon head cap screws, identified by part number 284591-0001 and NSN 5305-01-479-0793, sourced from Marotta Controls Inc. All supplied hardware must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition scale. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. The items are to be delivered FOB origin to the designated receiving warehouse in Tracy, California, with a delivery window of 171 days from contract issuance, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in any part of the hardware, packaging, preservation, or marking, with limited exceptions for functional uses in specific devices such as batteries, fluorescent lamps, sensors, or weapon systems, provided those items meet additional containment standards per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed in the sample lot, unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The solicitation number is SPE4A6-26-T-05YY, with a response deadline of July 22, 2026, and the primary point of contact is Monica Greene of the ASC Commodities Division. The original required delivery date was November 4, 2026, but the contract specifies a need ship date of January 10, 2027, aligning with the extended delivery timeframe.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract governs the procurement of 18 hexagon cap screws, NSN 5305015541393, under solicitation SPE4A6-26-T-06CK, with a total value of $324.00 at $18.00 per unit. Delivery is required FOB origin with a 171-day lead time from the order date, and the item must be delivered to the DLA Distribution Facility in New Cumberland, Pennsylvania, where government inspection and final acceptance will occur. The product must meet all technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, referenced through RA001, RP001, RQ011, and RQ017, which take precedence over any other standard including ASTM D3951. Packaging must comply with MIL-STD-129 for labeling and barcoding, and palletization must follow RP001 DLA Packaging Requirements. Sampling and inspection must adhere to MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contract includes mandatory clauses regarding equal opportunity, trafficking in persons, employment eligibility, hazardous materials, cybersecurity, export control, prohibition of hexavalent chromium, and restrictions on defense telecommunications equipment, as well as requirements for electronic invoicing via WAWF and compliance with DOD accounting and payment protocols. All submissions must be made electronically through the DLA Internet Bid Board System by the stated deadline, with no physical or alternative delivery methods permitted.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

SCREW, CLOSE TOLERANCEThis contract specifies the procurement of a close tolerance screw with NSN 5305-01-483-4778 and part number 120-225V08-08, designated as a critical application item for Bell Textron Inc. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Manufacturing may require casting or forging, and bidders must submit a Casting and Forging Assistance Request if they lack the necessary tooling or materials. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned strict verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and all supplies must adhere to DLA packaging requirements per RP001 and MIL-STD-2073-1E with marking compliant to MIL-STD-129 and no special marking codes applied. Unit of issue is each, with a fixed quantity of 15 units, no variance allowed, and delivery is FOB origin with inspection and acceptance occurring at destination. The item must be delivered within 171 days of the contract award, with the required delivery date set for January 10, 2028, and the need ship date listed as January 10, 2027. Packaging is to be palletized per DLA guidelines and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following transportation protocols outlined in DLAD Proc Notes C19 and C20. Government identification is not required on non-accepted supplies per RQ011, and Item Unique Identification is waived per DFARS 252.211-7003.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE