Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Precision Washer Manufacturing & Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the manufacture and supply of recessed washers identified by NSN 5310-01-222-5934 and part number 2668815, engineered to meet stringent aerospace and military specifications. Compliance is mandatory for material traceability, certification, and adherence to MIL-STD-129 for labeling and packaging, along with ASTM D3951 for military commercial item packaging requirements. All units must be produced under controlled conditions to ensure dimensional accuracy, material integrity, and environmental resilience appropriate for defense and aviation applications. The work will be subject to rigorous quality assurance protocols to guarantee full conformity with federal procurement standards. This is a subcontract opportunity posted under NAICS code 332722, managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was made available on August 7, 2026, with responses required by August 21, 2026. While the exact delivery location is unspecified, performance must align with the defense supply chain’s logistics and documentation requirements. The procurement is not subject to a set-aside designation, meaning it is open to all eligible contractors. Bidders must be prepared to demonstrate capacity for high-precision manufacturing, full documentation of material sources, and reliable delivery timelines consistent with military operational needs.

General Info

Manufacture and supply of recessed washers to military specs with full traceability and packaging compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture and supply of recessed washers (NSN 5310-01-222-5934, P/N 2668815) to aerospace and military specifications, including material traceability, certification, and compliance with MIL-STD-129 and ASTM D3951.

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
WASHER, RECESSED
Solicitation # SPE4A7-26-R-XA03
The contract is for the procurement of a recessed washer, identified by NSN 5310-01-222-5934 and part number 2668815 from Honeywell International Inc., classified as a commercial item and designated as a critical application aerospace consumable. The contract is a firm-fixed-price indefinite delivery contract with a five-year base period, no option periods, and a total contract ceiling value of $350,000, with an estimated annual demand of up to 440 units and a guaranteed minimum of 110 units per year. Delivery is to occur at destination under FOB destination terms, with a required delivery window of 146 days after award, and both inspection and acceptance are to be conducted at the delivery point by the government. Packaging must conform to ASTM D3951, subject to override by the DLA Master List of Technical and Quality Requirements, and all markings and labeling must comply with MIL-STD-129, including specific declarations such as “Product Verification Test Samples – Do Not Post to Stock,” along with contract number and lot/item identifiers. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement, and unit of issue and quantity per unit pack must strictly match contract specifications. The contract enforces strict compliance with a broad array of federal regulations and clauses, including FAR and DFARS provisions related to equal opportunity, employment eligibility, combating human trafficking, labor standards, privacy training, contract disputes, prompt payment, electronic funds transfer, subcontractor reporting, and antiterrorism awareness. Payment must be processed exclusively through the Wide Area WorkFlow (WAWF) system, with no alternatives permitted, and contractors are required to be registered in the System for Award Management (SAM) and maintain current entity identifiers. Proposals must be submitted electronically via the DIBBS portal, remain valid for 120 days, and contain accurate representations regarding size status, socioeconomic certifications, and compliance with Buy American and Trade Agreements Act provisions. The evaluation process follows a trade-off approach, weighing past performance (including SPRS assessments, historical quality, and delivery compliance) as significantly more important than price, with cost or price weighted approximately equal to all non-price factors combined. Key technical requirements include compliance with DLA’s master list, submission of material certifications, traceability recordkeeping, and adherence to hazardous materials labeling under 29 CFR 1910.1200
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0730
The contract specifies the procurement of 167 fixed bushing nuts with sleeves, identified by NSN 5310-00-916-7522, designed as a commercial item meeting military or approved consensus standards. The nut size is #6(.138")-32 UNC-2B with a self-locking threaded insert made of polytetrafluoroethylene, while the overall body is constructed from aluminum alloy 2024 and cadmium plated for corrosion resistance. The item must comply with MIL-STD-130N for identification marking and adhere strictly to the current revision of the applicable part standard, with prior revisions still acceptable for previously manufactured units. Packaging must follow DLA procurement requirements and all hardware is subject to quality conformance inspections. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the item, except for specific exemptions like functional components in batteries, instruments, or weapon systems regulated by NAVSEA, which must include secondary containment and shockproofing. The contract is a total small business set-aside under solicitation SPE7M2-26-Q-0730 with a response deadline of August 14, 2026, and delivery is required within 100 days of award to Hill AFB, Utah. The procurement is overseen by the Department of Defense’s Nuclear Reactor Program, with Alla Yakover as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, WING
Solicitation # SPE4A7-26-R-XA08
The contract is for the procurement of one NUT, PLAIN, WING (NSN 5310-01-369-2906), a quick-release wheel nut, under an Indefinite Delivery Contract (IDC) with a five-year base period and no options, issued as a total small business set-aside under NAICS code 332722. The solicitation, numbered SPE4A7-26-R-XA08, was posted on August 7, 2026, with a response deadline of August 21, 2026, and requires delivery within 642 days ADO, with shipments governed by FOB destination terms. The item must comply with stringent technical specifications, including a TDP Rev B Gen 2 aligned with drawing 19200 12592026 Revision G, phosphate finishes per MIL-DTL-16232 or TT-C490, and prohibition of Class I ozone-depleting chemicals. Quality requirements are governed by ISO 9001:2015, with inspection and acceptance occurring at origin for production units, while first article testing involves a sample size of three and is subject to government inspection at source and acceptance at destination. The contractor must conduct contractor first article testing per LAW QAP 12592026 and secure written process approval from RDAR-MEE-W, Mark Godlewski. Packaging and marking follow MIL-STD-2073-1 Method 10, MIL-STD-129, and specific drawings including DWG 12592026 SPI AM12592026 Revision A, with preservatives per MIL-PREF-3150, bagging per ARDEC Drawing 13027484, and container and closure standards per ASTM D5118 and D1974. Export-controlled technical data is subject to ITAR or EAR, requiring JCP certification, completion of DLA export control training, and prior authorization for disclosure to foreign persons. The contract mandates adherence to DFARS clauses covering safeguarding covered defense information, cybersecurity maturity certification at Level 2, counterfeit electronic part detection, sourcing of electronic components, Buy American Act compliance, and use of U.S.-flag vessels for ocean transport. Payment must be processed electronically via WAWF with submission of invoice and
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-R-XC36
This contract is for the procurement of close-tolerance screws identified by NSN 5305-01-105-9370 and part number 3M926-3L11, with a total quantity of 743 purchase groups, each containing 20 units, under a firm fixed price indefinite delivery purchase order with a five-year base period. The items must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, and are subject to zero-defect acceptance criteria under MIL-STD-1916 or ASQ H1331 sampling standards, with all unspecified attributes treated as major. Physical identification and bare item marking must adhere to RQ017, and any non-accepted supplies must have government identification removed per RQ011. Packaging and labeling must follow ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and all packaging must be marked in accordance with the latest revisions in effect at the time of delivery. Inspection and acceptance occur at origin, with the government retaining full authority over compliance verification. The contract mandates compliance with federal acquisition regulations including FAR and DFARS clauses covering subcontracting, counterfeit part avoidance, hazardous material prohibitions, Buy American requirements, labor practices, cybersecurity, and supplier performance risk. Critical application status requires sourcing through pre-approved manufacturers including Boeing, Howmet, SPS Technologies, Huck International, and others, with tooling or casting assistance required through DLA’s designated channels. Delivery must be completed within 190 days after receipt of order, with FOB origin terms applying, and payment processed exclusively through WAWF. No options or increments are included, and award will be made based on a best-value trade-off emphasizing past performance, particularly SPRS assessments and historical quality and delivery records, over price alone. Contractors must be registered in SAM, possess a valid UEI and CAGE code, comply with CMMC Level 2 cybersecurity requirements by November 2026, and submit proposals electronically via the DLA Internet Bid Board System by the August 21, 2026 deadline.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
Federal
Subcontractor for Component Sub-Assembly or Precision MachiningThe contract seeks a subcontractor to supply precision-machined sub-components including turbine housings, shafts, and seals for integration into jet engine fuel pumps, requiring high-tolerance manufacturing capabilities consistent with aerospace standards. The work is classified under NAICS code 332722 for machine shops and will be performed at a location with the zip code 73145, indicating the primary performance site is in Oklahoma City. The opportunity was posted on August 7, 2026, with a hard deadline for responses on August 15, 2026, at 8:00 PM, leaving a narrow window for submission. This is a subcontract under the Department of Defense, specifically managed by Ok DLA Aviation at Oklahoma City, and while no set-aside type is specified, the requirement is clearly tied to defense aviation systems where reliability and exacting specifications are critical. Participation requires proven experience in aerospace-grade machining and the ability to meet stringent quality and delivery timelines for mission-critical engine components.
Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
Federal
Precision Optical Mounts and Alignment FixturesThe contract calls for the design and supply of ultra-stable optical mounts, kinematic stages, and precision alignment fixtures engineered to maintain sub-micron mechanical stability and minimal thermal expansion, ensuring the integrity of laser cavities under demanding environmental conditions. These components must meet stringent performance criteria to support high-precision optical applications, with particular emphasis on long-term dimensional stability and resistance to thermal drift. The solicitation is issued as a subcontract under the NAICS code 332722 by the National Institute of Standards and Technology, part of the U.S. Department of Commerce, and is performance-bound to Boulder, Colorado, with a response deadline of August 19, 2026. The technical requirements demand advanced materials and manufacturing techniques to achieve the necessary stability, and vendors must demonstrate proven expertise in precision optical metrology and thermal management. The work will directly support critical research and measurement systems requiring exceptional optical alignment stability.
Department Of Commerce Nist

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
Federal
Screw
Solicitation # SPMYM426Q3625
The solicitation for screws, identified by number SPMYM426Q3625, is a Small Business Set Aside with a NAICS code of 332722, exclusively open to small businesses as defined by the SBA. Offers must be submitted by August 11, 2026, under the Lowest Price Technically Acceptable evaluation method, meaning the lowest responsive bid that meets all technical requirements will be selected. Vendors must complete the HMDRFQINFO form found on pages 27–30 of the solicitation and accurately declare their business size, including any applicable small business designations such as SDB, VOSB, WOSB, SDVOB, HUBZONE, or 8a. Contractors must indicate whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer, and confirm their independence to set prices. Shipping must be FOB destination to Pearl Harbor Naval Shipyard, with delivery estimated in calendar days, and the CAGE code and country of manufacture must be provided. All bids will be screened for responsibility using PPIRS and FAR 9.104 criteria. The delivery address is DLA Distribution at Building 167-1, Receive 808-473-8000 X4961, Pearl Harbor, HI 96860-5033. Primary point of contact is Quincey Dillenback, reachable via email at quincey.dillenback.civ@us.navy.mil, with general inquiries directed to distrcustomerservice@dla.mil.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
Federal
53--BOLT,MACHINE
Solicitation # N0038326QFB32
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support is seeking to procure 19 machine bolts under NSN 1R-5306-016668961-H5 and part number 513-004-00 on a sole source basis due to insufficient, inaccurate, or illegible data in government records that would allow for competitive sourcing. Delivery is FOB origin, and the items are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, necessitating Government Source Approval prior to award. Because the approval process for new sources would delay the award beyond acceptable timelines, only currently approved sources may submit proposals. Prospective offerors who are not already approved must include all required documentation outlined in the NAVSUP WSS Source Approval Brochure with their submission; incomplete submissions will be disqualified. The solicitation, designated N0038326QFB32, was posted on August 7, 2026, with responses due by September 11, 2026. The contract will be awarded by the office located in Philadelphia, Pennsylvania, and inquiries should be directed to Casey M. Brown at the provided email address.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
NSN 5306-01-317-4318, BOLT, CLOSE TOLERANCE - 40A / HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V
Solicitation # SPE4A626R0296
The Defense Logistics Agency Aviation in Richmond is conducting market research to identify potential qualified sources for the close tolerance bolt with NSN 5306-01-317-4318, a critical component used on Black Hawk helicopters including the UH-60A, UH-60L, HH/UH-60M, and UH-60V models. Currently, Avibank Mfg., Inc. and Space-Lok, Inc. are the approved sole source suppliers with part numbers AS616-102 and SLB163-102 respectively. This notice serves purely as an informational solicitation for market research and is not a request for proposals, nor does it obligate the government to award any contract. Responses are voluntary, and no funding is available to cover the costs of preparation or submission. Interested manufacturers or suppliers capable of producing or legitimately obtaining the item may submit information by August 11, 2026, to be considered for future qualification as an approved source. To be formally evaluated as an approved supplier, companies must submit a complete Source Approval Request package in accordance with the JACG SAM HB guidelines, demonstrating that their product meets or exceeds the quality and performance standards of the existing approved items. The SAR package must include all necessary technical data to prove equivalency or superiority. For items without an active solicitation, submissions must be sent directly to the DLA SAR Program Office at the Richmond address. The primary point of contact for inquiries is April Wynn, Acquisition Specialist, reachable at the provided phone number and email. The solicitation is posted under number SPE4A626R0296 with a NAICS code of 332722, and the response deadline aligns closely with the notice's submission window, reflecting a structured yet open process for expanding the supplier base while ensuring strict adherence to quality and specification requirements.
DLA Aviation

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,HEXAGON
Solicitation # N0010426QFE00
This contract pertains to the procurement of plain hexagon nuts designated as Special Emphasis Level I material for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must strictly comply with MIL-DTL-1222 specifications, including requirements for grade 8 SAE J995 material, hardened and tempered condition, zinc plating per ASTM-B633 Type II Class 5, and specific chemical and mechanical properties. Traceability is mandatory from raw material through final product, requiring unique heat-lot markings, certified test reports, and documentation that cannot be transcribed or qualified with disclaimers. All fasteners must be marked with manufacturer ID, material symbol, and traceability code applied prior to coating using approved MIL-STD-792 methods, with full documentation maintained for inspection. The contract mandates comprehensive quality assurance under ISO-9001 or MIL-I-45208 systems, with Government source inspection rights and 100% verification of material certifications, mechanical testing, and non-destructive examination results. First Article Testing is required with a 180-day submission window and 60-day review period, and all certifications must be submitted through WAWF using specified DODAACs and email notifications prior to shipment. Hydrogen embrittlement relief is mandatory for plated fasteners exceeding specified hardness thresholds, and compliance certification must include bake times and temperatures. No rework or retesting is permitted without PCO approval, and subcontractor oversight is enforced through prime contractor audits and inclusion of contract quality clauses in all purchase orders. Delivery is capped at 365 days post-contract effective date, with all material subject to DO priority rating under DPAS and Buy American Act requirements. The solicitation is restricted to small business set-aside, with full compliance to Navy-specific data submission, waiver procedures, and configuration control processes through ECDS and ECPs.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
Federal
Bar, Hex Nut
Solicitation # SPMYM4-26-Q-0833
This solicitation, identified as SPMYM4-26-Q-0833, is a combined synopsis and solicitation for Bar, Hex Nut under Federal Acquisition Regulation Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information provided exclusively through SAM.gov. The requirement is set aside entirely for small businesses, with the North American Industry Classification System code 332722 and a small business size standard of 600 employees. The evaluation method is Lowest Price Technically Acceptable, and vendors must demonstrate responsibility through SPRS in accordance with FAR 9.104. All responses must be submitted via the required quote form attached to the posting, with only one quote permitted per vendor and all attachments fully completed. The contract is governed by provisions and clauses effective through FAC 2025-06 and DFARS Change Notice 20251110, and contractors are responsible for ensuring compliance with all applicable terms. The solicitation was posted on August 7, 2026, with responses due by August 12, 2026, at 2:00 a.m. Eastern Time, and the performance location is in Honolulu, Hawaii, 96840, with the contracting office based in Pearl Harbor, HI, 96860-5033. The request is managed by DLA Maritime - Pearl Harbor under the Department of Defense, and the primary point of contact is Floyd Shiroma, reachable via email at floyd.shiroma.civ@us.navy.mil. No written solicitation will be issued, and failure to submit a complete and single response using the official form will result in rejection. All interested parties must access and comply with the full text of the referenced regulatory clauses through the provided federal databases.
DLA Maritime - Pearl Harbor

POSTED

2 days ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
Federal
NAWCAD WOLF - Intent to Sole Source for Turnlocks & Eccentric Pins
Solicitation # N0042126P1291
The U.S. Navy’s Naval Air Warfare Center Air Division is issuing a sole-source solicitation, N0042126P1291, to procure Eccentric Pins with part number CA4480-4 and Turnlocks with part number CA1711 from Howmet Global Fastening Systems under Federal Acquisition Regulation Part 13.106-1(b), bypassing competitive bidding due to the specialized nature of the items and the authorized sole-source relationship. All responses must be submitted via email to Maria A. Sproul no later than 1:00 PM Eastern Standard Time on August 12, 2026, and must originate from a Howmet Global Fastening Systems authorized distributor, with proof of authorization required for consideration. Submission into the SAM.gov database is mandatory for any vendor seeking award consideration, and offers must be firm-fixed-price with no adjustments permitted; the initial quote must reflect the vendor’s best and final offer both on price and technical compliance. Offerors are required to provide specific details including FOB destination, shipping costs, IUID labeling status, Tax ID, Unique Entity ID, CAGE code, small business status, estimated delivery date, and a copy of any applicable pricelist, along with a total quoted amount. The procurement carries no set-aside classification and is designated for large businesses, with performance anticipated at Saint Inigoes, Maryland, near the specified delivery point 20684-4013. While the notice is published as a sole-source intent, the government reserves the right to evaluate any submitted quotes to determine whether future competition is warranted, although no reimbursement will be provided for the submission of information. The contract award, if made, will be based solely on the data received by the deadline and within the parameters of authorized noncompetitive acquisition authority.
Naval Air Warfare Center Air Division

POSTED

2 days ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541380
New
DIBBS
Quality Assurance & Product Verification Testing (PVT) SupportThe contract supports government-directed Product Verification Testing (PVT) activities by providing comprehensive quality assurance services, including the preparation of test samples, accurate maintenance of traceability records, and management of non-conformance reporting and corrective action processes. This subcontract is issued under the NAICS code 541380 and falls under the jurisdiction of the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance obligations tied to government-mandated verification protocols. All activities must adhere to strict documentation standards to ensure product integrity and regulatory compliance throughout the testing lifecycle. The solicitation was posted on August 7, 2026, with a deadline for responses set for August 21, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. While no specific location or point of contact is provided, the work is intended to support defense-related product verification efforts, requiring the contractor to operate within a highly regulated environment with emphasis on accountability, precision, and timely resolution of deviations. The absence of a set-aside designation suggests this opportunity is open to all eligible vendors, with a focus on demonstrated capability in quality systems and PVT support within the defense supply chain.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling & Logistics CoordinationThe contract requires full compliance with MIL-STD-129 standards for the packaging and labeling of recessed washers, ensuring all materials are properly marked, barcoded, and documented for military logistics. Packaging must adhere to RP001 guidelines for palletization, and all shipments must be coordinated through the Vendor Shipment Module (C20) to ensure accurate tracking and integration with defense supply systems. The work involves end-to-end logistics preparation, from initial packaging through final outbound shipment, with strict adherence to military specification requirements to support seamless receipt and inventory management. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 493190 indicating warehousing and storage services. The solicitation was posted on August 7, 2026, with proposals due by August 21, 2026. Place of performance and point of contact details are not specified, but all activities must align with federal defense logistics protocols. The successful contractor will be responsible for maintaining compliance throughout the supply chain, ensuring every unit is properly identified, palletized, and shipped via the designated C20 system to meet military delivery expectations.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Quality Inspection and NDT ServicesThe contract seeks qualified small businesses to provide third-party non-destructive testing and quality inspection services in support of aerospace components and systems, ensuring strict adherence to federal aerospace regulations including FAR 52.246-2 and MIL-STD-129. These services are critical for verifying structural integrity, material compliance, and proper labeling of components throughout the supply chain, with all work required to meet the rigorous standards of the Department of Defense. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility exclusively to small business concerns as defined by the SBA, and is categorized under NAICS code 541620 for engineering services. Performance of the contract is expected to occur within the jurisdiction of the ASC SUPPLIER OPER AE AND AF DIV, though specific location details are not provided. Interested parties must submit responses by the deadline of September 8, 2026, with the opportunity to compete for this subcontract award under a highly regulated and compliance-driven environment. The work demands specialized expertise in NDT methods such as ultrasonic, radiographic, or dye penetrant testing, along with documented quality control processes aligned with military and aerospace specifications. The contracting activity is managed by the Department of Defense, and all bidders are encouraged to review the official solicitation through the provided DIBBS link to ensure complete understanding of technical requirements, deliverables, and reporting obligations.
Environmental Consulting Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
DIBBS
Packaging, Palletization, and MIL-STD-129 LabelingThis contract requires the final packaging, palletization, and labeling of engine stay assemblies in full compliance with DLA RP001 and MIL-STD-129 standards, ensuring proper barcoding and containerization for FOB Destination shipment. The work must adhere strictly to military packaging and labeling protocols to guarantee seamless handling, tracking, and delivery throughout the supply chain. The solicitation is a subcontract under a Total Small Business Set-Aside, designated for small businesses pursuant to SBA regulations and FAR 19.5, with the NAICS code 493190 indicating warehousing and storage services. It was posted on August 7, 2026, and responses are due by September 8, 2026. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance location not specified. All work must align with federal military logistics standards to support defense supply chain requirements.
Other Warehousing and Storage

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 331210
New
DIBBS
Raw Material and Forging Supply for Aerospace ComponentsThe contract seeks the supply of raw forged or bar stock materials, specifically titanium and high-strength steel, for the fabrication of engine stay assemblies used in aerospace applications. Full material traceability and certification are required to ensure compliance with stringent aerospace quality standards, encompassing batch numbering, chemical composition verification, and mechanical property documentation. The materials must meet exacting specifications to support critical structural components where reliability and performance under extreme conditions are non-negotiable. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 331210 for forging and stamping, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by September 8, 2026, with the solicitation posted on August 7, 2026. The place of performance and point of contact details are not specified in the available data, but the work is expected to align with defense-grade manufacturing and delivery protocols outlined in federal acquisition regulations. Proposers must be certified small businesses to qualify for this opportunity, and all submissions must adhere to the technical and compliance requirements inherent in defense aerospace supply chains.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332994
New
DIBBS
Precision Machining and Fabrication of Engine Stay AssemblyThe contract is for the manufacture of a critical engine support component, known as the Engine Stay Assembly, for the B-52 aircraft, requiring precise machining, welding, heat treatment, and final assembly to meet strict military specifications. This subcontract is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring that only qualified small business entities may bid. The work demands advanced fabrication capabilities and rigorous quality control to ensure structural integrity and operational reliability under extreme conditions. The solicitation was posted on August 7, 2026, with a response deadline of September 8, 2026, and falls under NAICS code 332994 for Other Fabricated Metal Product Manufacturing. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though no specific performance location or point of contact is listed. The contract is accessible through the DIBBS portal, and vendors must demonstrate technical proficiency, compliance with defense standards, and the capacity to deliver a mission-critical part that supports the longevity and functionality of B-52 aircraft engines.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 561910
New
DIBBS
Packaging and Marking Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1 Method 10 for fastener packaging and MIL-STD-129 for labeling, specifically for NSN 5310-01-369-2906, ensuring all packaging, marking, and documentation meet exact military standards. This includes accurate labeling, proper documentation updates, and adherence to specifications that guarantee interoperability, traceability, and readiness for military logistics systems. The work involves meticulous attention to detail in packaging methods and labeling formats to ensure acceptance by defense supply chains. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 561910, and issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on August 7, 2026, with a response deadline of August 21, 2026, and is accessible through the DIBBS portal. Performance location details are not specified, but the requirement is tied to satisfying U.S. military packaging and marking protocols regardless of where work is performed. The contract is structured to support defense logistics readiness through standardized, auditable packaging and labeling practices.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332813
New
DIBBS
Phosphate Coating and Surface Treatment ServicesThe contract seeks qualified small businesses to provide phosphate coating and surface treatment services for metal fasteners in strict compliance with RQ036 specifications and military corrosion protection standards. Services must be performed to meet Department of Defense requirements for DLA-approved surface treatments, ensuring consistent quality and longevity of coated components used in critical defense applications. The work is categorized under NAICS code 332813 and is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside authority, limiting eligibility to firms certified as small under applicable size standards. The solicitation was posted on August 7, 2026, with responses due by August 21, 2026, and is issued under the ASC Supplier Operations AE and AF Division of the Department of Defense. Performance location details have not been specified, and no point of contact information is provided in the public record. Interested parties must access the full solicitation through the DIBBS portal at the provided link to review technical requirements, submission guidelines, and evaluation criteria. The contract is structured as a subcontract and places emphasis on adherence to military-grade corrosion resistance standards without deviation.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Quality Certification ServicesThe contract seeks independent testing and certification of the first production units to confirm full compliance with military fastener specifications, requiring successful validation through rigorous analytical and inspection protocols. The deliverables include the formal issuance of a Certificate of Quality Compliance and a Material Safety Data Sheet, ensuring that all materials and manufacturing processes meet stringent defense standards for performance, safety, and documentation. This effort is critical to verifying that initial output aligns with contractual and regulatory requirements before full-scale production proceeds. The opportunity is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, and falls under NAICS code 541380 for other scientific and technical consulting services. It is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 21, 2026, and an initial posting date of August 7, 2026. The place of performance and specific location details are not specified, but all work must be performed in accordance with military-grade quality assurance frameworks, and contractors must demonstrate proven capability in aerospace or defense-related testing and certification services.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Precision Fastener Manufacturing – Wing Nuts (Quick Release)The contract entails the manufacture and supply of military-specification quick release wing nuts in strict compliance with technical drawing NR 19200 12592026 Rev G and the technical data package TDP Rev B Gen 2. It requires full adherence to production standards including first article testing to verify conformance prior to full-scale manufacturing. Packaging must meet MIL-STD-2073-1 requirements to ensure protection, preservation, and proper identification throughout the supply chain. The work is governed as a subcontract under a total small business set-aside classification, exclusively available to small businesses as defined by the SBA. The NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. The contract was posted on August 7, 2026, with a response deadline of August 21, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Performance location and point of contact details are not specified, but bid submissions must be made through the provided DIBBS portal link.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 484121
New
DIBBS
Logistics and F.O.B. Delivery CoordinationThe contract entitled Logistics and F.O.B. Delivery Coordination is a subcontract set aside for Service-Disabled Veteran-Owned Small Businesses, solicited under the NAICS code 484121 for truck transportation services. It requires the successful bidder to manage the end-to-end transportation and delivery of hydraulic fitting assemblies to a government-designated F.O.B. point, ensuring strict adherence to delivery timelines and comprehensive documentation compliance. All activities must align with federal procurement standards and logistical protocols specific to Department of Defense requirements. The solicitation was posted on August 7, 2026, with responses due by September 7, 2026, and is issued by the ASC Supplier Oper AE and AF Division under the broader Department of Defense. While specific delivery locations and points of contact are not detailed, performance is expected to occur within the jurisdiction of the contracting agency, and bidders must demonstrate proven capability in handling sensitive, time-critical defense-related shipments. Participation is restricted to eligible Service-Disabled Veteran-Owned Small Businesses, and all proposals must meet mandatory compliance criteria for transportation, tracking, and regulatory reporting.
General Freight Trucking, Long-Distance, Truckload

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Labeling for Defense ShipmentsThe contract requires specialized packaging, marking, and labeling of hydraulic fitting assemblies in full compliance with MIL-STD-129 standards, ensuring all items are properly identified and prepared for defense logistics. This includes the application of CAGE code labeling and preparation for F.O.B. shipping, meaning the vendor is responsible for all packaging and documentation necessary to meet military shipment requirements. The work must be executed under strict adherence to federal defense standards to guarantee interoperability and traceability within the supply chain. This is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, identified by the NAICS code 561910 and managed by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on August 7, 2026, with a firm response deadline of September 7, 2026, and the performance location is not specified beyond the Department of Defense's operational requirements. All bidders must demonstrate capability to fulfill the exacting packaging and labeling specifications and be registered as a qualified SDVOSB to be eligible for award.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 29 days
View Details