Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Welding Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Precision welding services are contracted for high-integrity TIG and laser welding of thin-wall superalloy components on turbine duct assemblies, with strict requirements for dimensional stability and minimal thermal distortion. The work demands fully qualified welding procedures, certified personnel, and mandatory post-weld heat treatment to ensure metallurgical integrity and performance under extreme operational conditions. All activities must comply with defense-grade specifications and are performed under the authority of the Department of Defense through the Defense Logistics Agency, with execution tied to the contract SPE4A125G0027 and delivery order SPE4A526F3129, classified under NAICS code 332320 for specialty trade contracting.

General Info

Precision TIG and laser welding of superalloy components with post-weld heat treatment per DoD specs under contract SPE4A125G0027.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332320View NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

High-integrity welding (TIG, laser) of thin-wall superalloy joints on the turbine duct, requiring distortion control, qualified procedures, and post-weld heat treatment.

Similar Contracts

Same NAICS industry code

Control Panel Fabrication and AssemblyThe contract requires the design, fabrication, and testing of NEMA-rated SCADA control panels intended for outdoor deployment at a landfill site, incorporating programmable logic controllers, human-machine interfaces, and compatible power supply units to ensure reliable operation in harsh environmental conditions. All panels must meet specified industrial standards for durability, weather resistance, and electrical safety, with full testing protocols to validate performance prior to delivery. The work falls under NAICS code 332320 and is structured as a subcontract opportunity issued by the City of Denton, Texas, with responses due by August 26, 2026. The project demands precision in assembly, adherence to environmental ratings, and comprehensive documentation to support long-term maintenance and operational integrity in an uncontrolled outdoor setting.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Structural Component Fabrication and AssemblyThe contract involves the manufacture and assembly of structurally supported aircraft components that demand rigorous engineering documentation, configuration management, and strict adherence to DLA quality and packaging standards. All work must be performed in compliance with defense-specific requirements to ensure component integrity, traceability, and readiness for integration into military aircraft systems. The performance location is designated as Tinker Air Force Base with a zip code of 73145-8000, indicating that final delivery and coordination will occur within this critical military maintenance and logistics hub. This is a subcontract opportunity under the NAICS code 332320, which categorizes it within the aerospace component manufacturing sector. The solicitation was posted on July 22, 2026, with a firm response deadline of July 30, 2026, leaving a limited window for qualified suppliers to submit proposals. The contracting office is part of the Department of Defense, specifically under the ASC SUPPLIER OPER AE AND AF DIV, emphasizing the specialized nature of the work and its direct relevance to Air Force and aerospace operational needs. While details regarding set-asides and point of contact are not specified, compliance with DLA standards and the performance site location are central to bidding eligibility and award consideration.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Wiring Harness Manufacturing and AssemblyThe contract entails the full production and assembly of technical wiring harnesses to meet military specifications, requiring end-to-end manufacturing capabilities including design validation, component sourcing, precision crimping, terminal termination, shielding integration, labeling, and rigorous final inspection. All work must comply with strict defense standards, ensuring reliability and performance in mission-critical applications. The subcontract is issued under NAICS code 332320 by the ASC Commodities Division within the Department of Defense, with performance required at a facility in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 21, 2026, and responses are due by July 29, 2026, with no set-aside provisions specified. Interested parties must submit proposals through the official DIBBS platform prior to the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Welding and Metal Fabrication Services

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Aircraft Rib and Stiffener Components

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining and Truss Assembly FabricationThe contract for Precision Machining and Truss Assembly Fabrication encompasses the manufacture of critical truss components through precision CNC machining, welding, heat treatment, and final assembly, all performed to stringent aerospace and military specifications. The work is subcontracted under the Department of Defense, with the Defense Logistics Agency as the overseeing organization, ensuring compliance with defense-grade quality and performance standards. The North American Industry Classification System code 332320 confirms the nature of the work as metal forging and stamping, with an emphasis on precision fabrication for defense applications. Performance of the contract is expected to occur under the regulatory framework of federal defense procurement, though specific location details are not provided. The solicitation was posted in July 2026 and is identified by the contract number SPE4A726P5566, indicating it is part of a larger defense acquisition initiative. The components produced will be integral to structural systems requiring high reliability, dimensional accuracy, and material integrity under extreme operational conditions.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Welding and Metal Assembly Services

Defense Logistics Agency

POSTED

DEADLINE

Electrical Lead and Conduit Assembly ManufacturingThe contract involves the manufacture and delivery of electrical lead and conduit assemblies identified by NSN 6150006527776, requiring full compliance with military specifications throughout all stages including materials sourcing, fabrication, assembly, and packaging. The work must be executed to meet stringent defense standards, ensuring reliability and performance in operational environments. The subcontract is managed under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332320 indicating classification within architectural and structural metals manufacturing. The contract was posted on July 21, 2026, and the place of performance is not specified, suggesting flexibility in manufacturing location as long as deliverables meet all technical and regulatory requirements. The procurement is administered through the DIBBS system with the contract reference SPE4A626PD430.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabrication of Aircraft Structural Beam

Defense Logistics Agency

POSTED

DEADLINE

Backshell Component Manufacturing and AssemblyThe contract pertains to the precision manufacturing and assembly of 14 military backshell assemblies identified by part number M85049/33-1-8 and NSN 5935-01-244-6487, requiring strict compliance with SAE-AS85049C and MIL-C-85049A technical specifications. These components are critical for military electrical systems and must meet rigorous performance, durability, and environmental standards. The work is classified as a subcontract under NAICS code 332320, indicating specialized manufacturing activities. Performance is to be conducted at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, with no set-aside provisions specified. The agency responsible is the Active Devices Division within the Department of Defense, and the procurement is managed through the DIBBS platform with the designated reference number SPE7M526Q0742.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Aircraft Channel Component SupplyThe contract entails the supply of a single aircraft channel component, identified by NSN 1560-01-480-7329 and part number 7016336921, which is a vital structural element for military aircraft systems. This subcontract is managed under the Defense Logistics Agency within the Department of Defense and is classified under NAICS code 332320, indicating its alignment with aircraft manufacturing and component fabrication. The contract was posted on July 20, 2026, and is directly tied to the broader supply chain supporting defense aviation infrastructure. While the specific performance location and point of contact are not provided, the component is essential for operational readiness and maintenance of designated military aircraft platforms. The agreement is accessible through the DIBBS portal via the contract reference SPE4A122G0005 and delivery order SPE4A726F8794.

Defense Logistics Agency

POSTED

DEADLINE

Interior Aircraft Panel ManufacturingThe contract involves the fabrication and delivery of two interior liner panels designed for aerospace use, requiring strict adherence to technical specifications and compliance with military packaging and labeling standards. The work is intended for installation in aircraft systems and must meet rigorous quality and performance criteria appropriate for defense-related applications. The panels are to be manufactured and provided in accordance with industry best practices for aerospace components, ensuring durability, safety, and compatibility with existing internal aircraft structures. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker Air Force Base, Oklahoma, 73145-8000. The North American Industry Classification System code is 332320, indicating the work falls within fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026. All deliverables must be properly documented, labeled, and packaged to meet military logistics requirements, and the contractor is expected to ensure full traceability and compliance with defense supply chain protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

about 10 hours ago

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 10 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 10 hours ago

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

about 10 hours ago

DEADLINE

Packaging and Marking ServicesThe contract specifies the proper packaging, palletization, and marking of shipments containing sealing compound in full compliance with military logistics standards. All activities must adhere to stringent defense department requirements to ensure safe handling, transportation, and inventory management across military supply chains. The work is classified as a subcontract under the NAICS code 493190, indicating it pertains to other transportation and support activities related to freight. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to meet operational readiness criteria without geographic restriction specified. The solicitation was posted on July 24, 2026, and the award details are accessible through the DIBBS system using the contract number SPE8ES26P1049.

Other Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract pertains to the provision of radiological testing services to determine whether a sealing compound exceeds regulatory thresholds for radioactivity. If testing reveals levels above permissible limits, the contractor is required to issue a formal notification to the appropriate authorities. This work falls under the NAICS code 541380, which covers other scientific and technical consulting services, and is issued as a subcontract by the Defense Logistics Agency under the Department of Defense. The requirement is triggered only if radioactive materials are suspected or detected, making it a conditional but critical compliance obligation. Performance is expected to align with federal regulations governingradiological safety, though the specific location of performance is not detailed. The contract was posted on July 24, 2026, and is accessible through the DIBBS system under contract number SPE8ES26P1049.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Hazardous Material Compliance & Labeling ServicesThe contract pertains to the preparation and submission of Safety Data Sheets and hazard warning labels for chemical shipments compliant with Department of Defense requirements, ensuring all hazardous materials meet federal safety and regulatory standards. The work is being performed under a subcontract arranged by the Defense Logistics Agency, specifically under NAICS code 541620 for scientific and technical consulting services, indicating a focus on technical compliance and documentation rather than physical handling or distribution of chemicals. The contract is tied to a specific acquisition number, SPE8ES26P1049, and was posted on July 24, 2026, suggesting it is part of an upcoming procurement cycle aimed at maintaining standardized hazard communication across military supply chains. All deliverables must align with DoD protocols for chemical safety, which includes accurate classification, labeling, and documentation to support safe transportation, storage, and handling of hazardous substances. The place of performance is not specified, implying flexibility in where the services are rendered, but all work must satisfy federal defense compliance mandates. The absence of a point of contact or location details suggests the contractor will receive instructions and specifications through formal contractual channels or established DoD documentation systems, and adherence to technical accuracy and timeliness will be critical to fulfilling obligations under this agreement.

Environmental Consulting Services

POSTED

about 10 hours ago

DEADLINE

Sealing Compound Supply (CLIN 0002)The contract entails the supply of 24,000 kilotons of sealing compound, aligned with the same military and regulatory specifications established under CLIN 0001, ensuring consistency in quality and compliance across procurement lines. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, falls under NAICS code 325520, which corresponds to the manufacturing of other chemical product and preparation products. The contract was posted on July 24, 2026, and is part of a broader effort to maintain standardized material specifications for critical defense applications. Although specific delivery locations and point of contact details are not provided, the place of performance and organizational address information are unspecified, suggesting logistics may be managed centrally or determined through subsequent directives. The contract remains accessible via the DIBBS system under the reference number SPE8ES26P1049.

Adhesive Manufacturing

POSTED

about 10 hours ago

DEADLINE

Sealing Compound Supply (CLIN 0001)The contract entails the supply of 2,000 kilotons of sealing compound compliant with military specifications and stringent hazardous material labeling requirements, ensuring it meets operational and safety standards for defense applications. The procurement is designated under CLIN 0001 and falls under NAICS code 325520, which corresponds to the manufacturing of other chemical products, reflecting the specialized nature of the compound. This is a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense, with the award posted on July 24, 2026. The place of performance and specific delivery details are not specified, but the contract requires adherence to all relevant federal and military regulations governing hazardous substances and industrial supplies. The contractual obligation is tied to the DLA’s procurement system, accessible via the provided DIBBS link, and serves logistical support for defense infrastructure or equipment maintenance.

Adhesive Manufacturing

POSTED

about 10 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 10 hours ago

DEADLINE