Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PRESSURE REGULATOR

Active
N0038326QPC21Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation seeks the procurement of twelve pressure regulators, identified by NIIN 016554808 and part number 4016AS241-1, under contract number N0038326QPC21, issued by the Navy’s Navsup Weapon Systems Support office in Philadelphia, Pennsylvania. All submissions must be sent via email to dana.n.knittel.civ@us.navy.mil by the deadline of September 3, 2026, and must include full compliance with mandatory source approval requirements outlined in the NAVSUP WSS Source Approval Brochure, accessible online; proposals lacking complete source approval documentation will be rejected. Government source approval is mandatory prior to award, and failure to obtain timely approval may result in the requirement being re-evaluated based on fleet support needs. Early and incremental deliveries are preferred. The contract incorporates numerous statutory and regulatory clauses including Buy American requirements, warranty provisions for non-complex supplies covering twelve months with六十 days to report defects, mandatory use of Workflow Pro assist modules, security prohibitions, equal opportunity mandates, and notice of priority rating for national defense purposes. All offerors must also comply with annual certification requirements and royalty information filings as stipulated. The NAICS code for this procurement is 332710, and the offering is open under a general competitive solicitation with no specified set-aside.

General Info

Procure twelve pressure regulators under Navy contract N0038326QPC21 with mandatory source approval by September 3, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONTACT INFORMATION|4|N762.46|TPB|771-229-2519|dana.n.knittel.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|x|||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report combo type |N/A|TBD|N00383|TBD|TBD|See schedule|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 months|60 days after discovery of defect||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| THIS SOLICITATION IS FOR THE FURNISHING OF: PRESSURE REGULATOR NIIN: 016554808 PN: 4016AS241-1 QUANTITY: (12) EA PLEASE SUBMIT QUOTE VIA EMAIL TO dana.n.knittel.civ@us.navy.mil BY THE DUE DATE SPECIFIED ON PAGE 1, BLOCK 10. THESE ITEMS REQUIRE GOVERNMENT SOURCE APPROVAL PRIOR TO AWARD. IF YOU ARE NOT AN APPROVED SOURCE, YOU MUST SUBMIT, TOGETHER WITH YOUR PROPOSAL, THE INFORMATION DETAILED IN THE NAVSUP WSS SOURCE APPROVAL BROCHURE WHICH CAN BE OBTAINED ONLINE AT https://www.navsup.navy.mil/public/navsup/wss/business_opps/ UNDER "COMMODITIES." OFFERS RECEIVED WHICH FAIL TO PROVIDE ALL DATA REQUIRED BY THE SOURCE APPROVAL BROCHURE WILL NOT BE CONSIDERED FOR AWARD UNDER THIS SOLICITATION. PLEASE NOTE, IF EVALUATION OF A SOURCE APPROVAL REQUEST SUBMITTED HEREUNDER CANNOT BE PROCESSED IN TIME AND / OR APPROVAL REQUIREMENTS PRECLUDE THE ABILITY TO OBTAIN SUBJECT ITEMS IN TIME TO MEET GOVERNMENT REQUIREMENTS, AWARD OF REQUIREMENT MAY BE CONTINUED BASED ON FLEET SUPPORT NEEDS. EARLY AND INCREMENTAL DELIVERIES ARE ACCEPTED AND PREFERRED. \

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
DIBBS
ADAPTER, LUBRICATION
Solicitation # SPE4A6-26-T-11SU
The contract pertains to the procurement of an ADAPTER, LUBRICATION with NSN 4920-00-972-6030 and part number 128GT10056, under solicitation SPE4A6-26-T-11SU, issued as a total small business set-aside under NAICS code 332710. A total of 63 units are required at a unit price of $63.00, with delivery mandated within 191 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin. Inspection and acceptance occur at the destination, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and must be packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are held to the strictest verification levels. Item Unique Identification is not required per the Service customer’s directive. Packaging must include proper markings and labeling, and palletization must meet DLA-specific requirements. The delivery deadline is set for February 20, 2027, with an original required delivery date of September 8, 2029. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the point of contact for inquiries is Amanda Thomas.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
C-FRAME, RECEIVER
Solicitation # SPE4A5-26-T-325U
C-FRAME, RECEIVER, identified by NSN 4920-01-625-1830 and part number RKD4101-8R, is a one-time procurement of six units under solicitation SPE4A5-26-T-325U, awarded to REXNORD INDUSTRIES, LLC. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951 packaging standards. All items must be marked and labeled per MIL-STD-129 and packaged in accordance with DLA Packaging Requirements for Procurement (RP001) and palletized as specified. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise defined; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unit Identification is not required under DFARS 252.211-7003(c)(1)(i). The material has no shelf life constraint and must be delivered FOB origin within 171 days, with a required ship date of January 31, 2027. Delivery is directed to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at destination. The quantity is fixed at six units with zero variance tolerance. Pricing is based on a unit price for each EA, totaling the full contract value per the CLIN structure. Transportation details are governed by DLAD Proc Note C19 for main shipment and C20 for first destination. Packaging must align with the specified QUP of 001 and be labeled using the DoD authorized unit of issue, with cross-reference to ANSI X12 available via the DLA link provided. All technical, quality, and packaging requirements take precedence over any conflicting commercial standards, and non-conforming items must be stripped of Government identification prior to return. The solicitation was posted on August 4, 2026, with responses due August 12, 2026, under NAICS code 332710, and is managed
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
INDICATOR ASSEMBLY,
Solicitation # SPE4A5-26-T-325D
The contract pertains to the procurement of an indicator assembly with NSN 4920-01-558-5930 and part number 040489-148 from HYDRAULICS INTERNATIONAL, INC., for a quantity of 14 units. The items must be delivered FOB origin within 171 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which override any conflicting standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements, incorporating proper identification and labeling, while palletization follows RP001 specifications. Sampling and acceptance procedures require zero non-conformances under MIL-STD-1916 or comparable zero-based plans, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. The item lacks an approved technical data package, rendering the specification proprietary or insufficient for competitive bidding. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with the original required delivery date set for April 2, 2027, and a need ship date of January 31, 2027. The solicitation was issued under contract number SPE4A5-26-T-325D with a response deadline of August 12, 2026, and is managed by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-Q-1270
The contract pertains to the procurement of a bushing sleeve with part number NAS72-8E015 and NSN 3120-01-241-5156, designated as a critical application item requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, including specific references RQ001, RQ009, RQ017, RT001, and RQ011. Manufacturing may involve casting or forging, and since the government may not possess the necessary tooling, suppliers are directed to submit a Casting and Forging Assistance Request for sourcing support. The item must be produced in accordance with Technical Data Package Rev A Gen 2 compliant with NAS72 Revision 8 dated 10/31/2024 and QAP-13873 Revision B dated 12/11/2013. All packaging must conform to ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and the DLA Master List requirements supersede any conflicting standards. The contract specifies a Firm Fixed Price with no variance allowed in quantity, requiring delivery of one unit within 180 days after award. Inspection and acceptance occur at origin, and shipment must be sent via the fastest traceable means, explicitly excluding parcel post. The delivery address is designated as ASD Jacksonville Supply Department, Building 111, Door 24, with a separate parcel post address provided solely for administrative use. The unit of issue is each, and pricing terms are firm, with the contract identified under solicitation SPE4A6-26-Q-1270. The government’s material need date is July 22, 2026, and the primary point of contact is Brea White at DLA, with full procurement details accessible through the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
FIXTURE, AIRCRAFT MA
Solicitation # SPE4A5-26-T-328Y
The contract is for the procurement of two aircraft maintenance fixtures, identified by part number CAT5758-13 and NSN 4920-21-920-1394, under solicitation SPE4A5-26-T-328Y, issued as a total small business set-aside. Delivery is required within 20 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is not subject to shelf life limitations, and unit identification is not required per customer request, though packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking codes. The supplier must follow DLA packaging requirements and avoid parcel post, shipping instead by traceable freight to the designated military facility in Belle Chasse, Louisiana. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with zero non-conformances accepted unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements from the DLA Master List and mandates CMMC Level 2 self-assessment compliance. The purchase request number is 7017659130, with a required delivery date of July 27, 2026, and the contract was solicited on August 4, 2026, with responses due by August 12, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
Federal
LOAD CELL,AIRCRAFT,
Solicitation # N0038326QPC24
This contract solicits four aircraft load cells with NIIN 015396227 and part number 1220-QF-12.5K, requiring quotes to be submitted via email to dana.n.knittel.civ@us.navy.mil by the deadline of September 3, 2026. The solicitation is issued under N0038326QPC24 by the Naval Supply Systems Command Weapon Systems Support, with performance to be conducted at the Philadelphia, Pennsylvania location. All offers must include full compliance with mandatory source approval requirements outlined in the NAVSUP WSS Source Approval Brochure, and proposals lacking complete documentation will be disqualified. Government source approval is mandatory prior to award, and failure to obtain timely approval may result in the award being deferred to meet fleet support needs. Early and incremental deliveries are preferred. The contract includes several applicable clauses, such as a 12-month warranty with 60 days to report defects, Buy American Act requirements, security prohibitions, and mandatory use of Workflow Pro’s Assist Module. The offeror must also adhere to the mandatory use of the Invoice and Receiving Report Combo type with TBD routing details, and comply with equal opportunity and royalty provisions. The NAICS code is 332710, and the contract falls under a Department of Defense procurement with an emphasis on national defense and energy program priorities.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
Federal
CABLE ASSY,AIRCRAFT
Solicitation # N0038326QPC22
This contract solicits repair services for two specific military-grade items: the CABLE ASSY,AIRCRAFT with part number 3654AS5180-1 and NSN 014974067, and the PENTIUM IV COMPUTER with part number 3654AS9220-1 and NSN 015452233. The contractor must restore both items to a Ready for Issue (RFI) condition in accordance with the latest approved technical publications, using new parts unless otherwise authorized, and must comply with rigorous configuration management and quality standards including ISO 9001 and SAE AS9100. All repairs must occur at approved facilities—ATEC/Astronics in Stafford, TX, or Irvine, CA—and require strict adherence to government-approved procedures; deviations necessitate formal approval from the Basic Design Engineer and the Procuring Contracting Officer. A 55-day repair turnaround time is mandated, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with an induction expiration date one year after contract award. The contract imposes multiple compliance obligations including Buy American requirements, security prohibitions, and mandatory use of the Workflow Pro system for payment processing. The contractor is responsible for all parts, tooling, and facilities unless explicitly designated as Government Furnished Material, and cannibalization is prohibited without specific written authorization. Beyond Economical Repair, Missing on Induction, and Over and Above Repair scenarios require prior written concurrence from DCMA and direction from the PCO before any work can proceed; unauthorized actions expose the contractor to full financial risk and potential rejection of delivered items. Throughput constraints must be specified monthly, and final reconciliation of pricing is contingent upon meeting the repair timeline and quality standards. Offers must be submitted via email to the designated point of contact, and prospective bidders must be pre-approved sources under NAVSUP WSS protocols, with complete source approval documentation required for consideration. Early and incremental deliveries are preferred, and any failure to comply with documentation, sourcing, or procedural requirements will result in disqualification.
Navsup Weapon Systems Support

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Piston and Shoe ComponentsThe contract involves the manufacture of high-precision machined components including pistons, shoes, and retainers from steel and aluminum, all produced to meet rigorous military specifications. The work requires advanced CNC turning, milling, grinding, and finishing operations to achieve tight tolerances critical for defense applications. The NAICS code 332710 identifies this as a precision machining activity under the broader category of metal forging and stamping, with the Defense Logistics Agency acting as the contracting entity on behalf of the Department of Defense. The subcontract is positioned for performance under the contract reference SPE7MX26D5022 with delivery order SPE7M126F4693, issued on August 3, 2026, though specific performance location or point of contact details are not provided. All components must comply with defense-grade quality and inspection standards to ensure reliability in mission-critical systems.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332710
New
DIBBS
Manufacture and Supply of Straight Pin (Headle) per Drawing 53711 8616950The contract requires the manufacture and delivery of one precision-machined straight pin, known as a headle, strictly in accordance with military drawing 53711 8616950 Revision A. Production must fully comply with MIL-STD-1916 for sampling and inspection procedures and MIL-STD-129 for labeling and packaging requirements to ensure military-grade conformity. The item is being procured under a subcontract solicitation issued by the ASC Commodities Division of the Department of Defense, with performance expected to occur in Mechanicsburg, Pennsylvania, at the zip code 17050-2411. The NAICS code 332710 identifies this as a precision machining activity within the industrial manufacturing sector. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 11, 2026, leaving a narrow window for qualified vendors to submit proposals. All deliveries must meet exacting technical specifications and documentation standards as defined by federal military standards without exception.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Mechanical ComponentsThe contract involves the precision manufacturing of mechanical components, specifically the FEEL MECHANISM, RUDD, through CNC machining, finishing, and rigorous quality inspection processes to comply with military specifications. The work must be executed to exacting standards ensuring functionality, durability, and reliability under demanding operational conditions typical of defense applications. All manufacturing steps are subject to stringent quality control protocols to guarantee conformance to federal and military requirements. The contract is classified as a subcontract under NAICS code 332710, which corresponds to machine shop processing, and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026. While no specific place of performance or point of contact is provided, all work must adhere to the technical and regulatory criteria outlined by the contracting authority, and potential bidders are directed to the official DIBBS portal for full submission details and requirements.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Component Manufacturing – Rigid Connecting LinkThe contract solicits the manufacture of a rigid connecting link to exact military specifications, requiring strict adherence to detailed material composition, dimensional tolerances, and surface finish standards. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond, aligning with FAR 19.5. The NAICS code 332710 classifies this as a precision forging, stamping, and related manufacturing activity. Performance of the work is expected to be conducted in alignment with Defense Department requirements, with the Strategic Acq Program Directorate as the overseeing agency. All bids must be submitted by the deadline of August 18, 2026, with the solicitation initially posted on August 3, 2026. The contract is not tied to a specific geographic location for performance, and no point of contact is listed, indicating all inquiries must be handled through the official DIBBS portal linked in the posting.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE7M4-26-Q-0908
The contract pertains to the procurement of 55 units of a CLEVIS, ROD END with NSN 5340-00-257-3765, issued under solicitation SPE7M4-26-Q-0908 by the Department of Defense’s Fluid Handling Division. Delivery is required within 120 days of award, and all hardware must comply with the current revision of the applicable military or consensus non-government part standard; previously compliant units manufactured under prior revisions are acceptable only if produced before the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlling based on acquisition type and amendment dates. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise stated, and zero non-conformances are required in sample lots unless contract exceptions apply. Identification marking must adhere to MIL-STD-130N, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 3, 2026, with responses due by August 6, 2026, and the primary point of contact is Colin Brown at the Department of Defense.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 336413
New
Federal
17--ACTUATOR,UPLOCK, IN REPAIR/MODIFICATION OF
Solicitation # N0038325QT470
This contract involves the procurement of two actuators, specifically designated as NSN 7R-1710-016657872-P8, TDP version 001, with a delivery term FOB origin. The contractual documents related to this procurement, including contracts, purchase orders, task orders, delivery orders, and modifications, are considered issued once they are transmitted via mail, facsimile, or electronic methods such as email. The government's acceptance of the contractor's proposal signifies a bilateral agreement to issue these documents as outlined. Early and incremental deliveries are accepted and preferred, indicating flexibility in the delivery schedule to accommodate the government's needs. The solicitation, titled "17--ACTUATOR, UPLOCK, IN REPAIR/MODIFICATION OF," was posted on August 5, 2025, with a response deadline of September 5, 2025. The procurement is managed by the Department of Defense’s Naval Supply Systems Command Weapon Systems Support office in Philadelphia, PA. The primary point of contact is Destiny N. Wiatr, reachable via email and phone, who oversees the contractual process. The procurement process is conducted under a presolicitation type, with no specified set-aside or NAICS code, emphasizing its open nature. The contract aims to support the repair and modification of uplock actuators, crucial components likely used in military or defense-related applications.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332721
New
Federal
53--BUSHING,SLEEVE
Solicitation # N0038326QLA93
This contract involves the procurement of a bushing sleeve identified by NSN 1R-5365-016836577-QE and referenced as ST4M166-14-010, with a quantity of one unit to be delivered FOB origin. The part is classified as flight critical and requires prior Government source approval due to the unique design capability, proprietary manufacturing knowledge, and technical data held exclusively by approved sources, none of which are economically available to the Government. Only previously approved sources have been solicited, and new sources must submit detailed qualification documentation per NAVSUP Weapon Systems Support Source Approval Information Brochures for either spares or repair, depending on their experience. Proposals lacking complete submissions or evidence of prior approval submission will be rejected. The approval process for new sources cannot be completed in time to meet urgent Fleet support requirements, necessitating the use of sole-source procedures under FAR 6.302-1. Any offeror not currently approved must provide all required technical and capability data concurrently with their proposal. The Government retains sole discretion to determine whether competition is warranted based on responses received within 45 days, or 30 days if awarded under an existing Basic Ordering Agreement. The acquisition is subject to Free Trade Agreements and the Buy American Act—Free Trade Agreements—Balance of Payments Program clause, as well as the World Trade Organization Government Procurement Agreement clause. The Government is not employing the commercial item acquisition policies under FAR Part 12, though interested parties may still propose commercial alternatives within 15 days of notice. Technical documentation such as military specifications, standards, and Qualified Product Lists can be accessed via the ASSIST-Online database or through the DODSSP in Philadelphia. All responses must be directed to the designated point of contact, Kimberly Flores, with submissions evaluated solely to inform the procurement decision. The place of performance and delivery terms do not alter the mandatory approval requirements tied to the part’s critical function and exclusive technical data rights.
Precision Turned Product Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
FAIRING ASSEMBLY
Solicitation # N0038325QT514
This contract pertains to the repair, overhaul, and testing of a Fairing Assembly, with the work to be performed primarily by The Boeing Company at their facility in Seattle, Washington. The scope includes disassembly, cleaning, inspection, component repair or replacement, reassembly, and testing to restore the items to a serviceable condition, known as Ready for Issue (RFI). The contractor is responsible for providing all necessary parts, materials, tooling, and facilities, ensuring compliance with applicable standards such as MIL-STD-130 and the Boeing drawing specifications. The contract emphasizes strict adherence to configuration management, quality control in accordance with ISO 9001/SAE AS9100, and proper storage and handling procedures. Key contractual elements include specific repair turnaround times, procedures for handling items beyond economical repair, missing parts on induction, and over and above repairs, with detailed requirements for documentation, approvals, and change management. The contract also mandates that all work be performed in a controlled environment, with quality assurance provisions and calibration systems in place. Payment and invoicing will follow the Wide Area Workflow system, with early and incremental deliveries preferred. The contract is managed by the Department of the Navy’s Naval Supply Systems Command, with primary contact via email and phone, and the solicitation was posted on SAM.gov with a response deadline of September 8, 2025.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
Federal
SUPPORT,STRUCTURAL
Solicitation # N0038326QTB99
The contract, titled SUPPORT, STRUCTURAL, is solicited under number N0038326QTB99 by the Naval Supply Systems Command Weapon Systems Support, a branch of the Department of Defense, with the primary office located in Philadelphia, Pennsylvania. The solicitation was posted on August 4, 2026, and responses are due by September 3, 2026, at 8:30 PM Eastern Time. The NAICS code 336413 indicates this procurement is for ship and boat building and repairing services. All contractual documents are considered officially issued upon electronic transmission or mailing, and early or incremental deliveries are both accepted and preferred. The point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil, with a secondary telephone number provided for inquiries. The contract incorporates multiple mandatory federal provisions and certifications, including those related to the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements, all effective as of February 2024. It mandates the use of Workflow Pro (WFP) Mod Assist Module under the N79 PAC designation and enforces the Navy's policy on AbilityOne support contractor information release. Additional clauses address Security Prohibitions and Exclusions, Equal Opportunity for Workers with Disabilities, and Annual Representations and Certifications under specific deviations effective in February 2026. The contractor must comply with National Defense Priority Ratings and adhere strictly to Item Unique Identification and Valuation standards. Payment instructions are to be submitted through Wide Area Workflow, using Invoice and Receiving Report formats, with payment processed under the N00383 designation. Royalty information and contractual issuance protocols are also explicitly defined.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
New
Federal
28--CABLE ASSEMBLY,CIA,- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC20
The contract pertains to a flight-critical cable assembly and similar replacement parts designated by NSN 7R-2840-015911511-SX, with a quantity of four units to be delivered FOB origin. Acquisition is restricted to previously approved sources due to essential proprietary technical data, unique design capabilities, and specialized manufacturing or repair knowledge held exclusively by those sources, which the Government cannot economically obtain elsewhere. Source approval by the Navy’s Design Control Activity is mandatory prior to contract award, and no full and open competition is permitted due to the item’s critical nature and insufficient publicly available technical data. Only firms previously qualified by the Government may submit proposals; new sources must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures for spares or repair, and failure to provide complete data will result in disqualification. If evaluation timelines prevent approval of a new source before delivery requirements, award may proceed based on fleet operational needs using only qualified sources. All offers must meet qualification criteria at the time of award as per FAR clause 52.209-1, and the Government is not applying commercial item acquisition policies under FAR Part 12. Additional technical specifications and standards can be obtained through ASSIST-Online or the DODSSP, and inquiries must be directed to the named point of contact.

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
CMIDS PLATE
Solicitation # N0038326QTB96
The contract pertains to the procurement of CMIDS PLATE under solicitation number N0038326QTB96, issued by the Naval Supply Systems Command Weapon Systems Support within the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, and is classified under NAICS code 333998. The primary point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil and telephone at 215-697-3528, with the office located in Philadelphia, Pennsylvania. Contractual documents are considered officially issued upon electronic transmission, including email, fax, or mail, and government acceptance of the contractor’s proposal forms a binding agreement. Early and incremental deliveries are encouraged and preferred. The contract incorporates multiple mandatory federal clauses and compliance requirements, including the mandatory use of Workflow Pro (WFP) Mod Assist Module, adherence to Buy American and Free Trade Agreements, and certification for Balance of Payments Program compliance. Security prohibitions and exclusions, equal opportunity provisions for workers with disabilities, and specific naval directives regarding AbilityOne contractor information release are fully applicable. The contract also enforces Notice of Priority Rating for national defense and emergency preparedness purposes, and requires strict compliance with Item Unique Identification and Valuation standards effective January 2023. Payment instructions are linked to Wide Area Workflow, with invoice and receiving report details to be confirmed, and royalty information and annual representations are required per applicable deviations and amendments effective through 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
Federal
WINDSHIELD PANEL,AI
Solicitation # N0038326RHA48
The contract pertains to the repair, overhaul, and refurbishment of F/A-18 E/F and EA-18G windshield panel assemblies, specifically part number 74A350002-1035 with NSN 1560-01-569-1186, to be performed by SierraCin Corporation/PPG at their facility in Sylmar, California. All work must restore units to a Ready for Issue (RFI) condition in strict accordance with approved technical data, including Boeing drawings, PPG specifications such as drawings 271510-03 and 271520-63, and process specification ER17-043, as directed by F/A-18 FST Engineering. The contractor is solely responsible for providing all tools, test equipment, facilities, labor, and materials unless explicitly designated as Government Furnished Material; the use of MIL-W-81381 wire is prohibited and must be replaced with SAE-AS22759 series wire. First article testing is mandatory, requiring 14 days’ notice to the Government, with witnessed inspections at key stages including after coatings applications and final assembly, and the contractor bears all costs associated with failed or resubmitted tests. Configuration management is tightly controlled, requiring prior written approval from the Procuring Contracting Officer for any changes to drawings, specifications, repair methods, or facilities, and all modifications must align with NAVSUP WSS clause NAVICPIA18. Beyond Economical Repair (BER), Missing on Induction (MOI), and Over and Above Repair (OAR) determinations require formal DCMA concurrence before any action, with no price adjustments permitted absent explicit Government authorization. The contractor must adhere to ISO 9001/SAE AS9100 quality systems, maintain ANSI/NCSL Z540.3 calibration standards, and implement rigorous receiving inspection protocols for all purchased materials. Cannibalization is strictly prohibited unless approved by NAVSUP WSS and the BDE, and all repaired items must be stored in an enclosed, protected environment. Inspection and acceptance occur at origin, and all contractual documents are deemed issued upon electronic transmission. The solicitation closed on April 17, 2026, and the contract is issued under N00383-22-G-SH01 with Rachel M. Opperman as the point of
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 2 months
View Details
NAICS: 334220
New
Federal
58--RECEIVER-TRANSMITTE, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RMA85
The contract pertains to the repair or modification of a receiver-transmitter unit identified by NSN 0R-5821-017027931-CC, with a quantity of eight units required. The solicitation number is N0038326RMA85, issued under the presolicitation phase with a response deadline set for August 31, 2026, at 4:00 AM. Delivery terms are FOB origin, indicating the buyer assumes responsibility and cost of transportation once the items leave the supplier's facility. The work is being managed by the Naval Supply Systems Command Weapon Systems Support based in Philadelphia, Pennsylvania, under the Department of Defense. The point of contact for inquiries is Peter A. Kobryn, reachable via email at PETER.A.KOBRYN.CIV@US.NAVY.MIL or by phone at (215) 697-4313. No set-aside classification or NAICS code has been specified, and the place of performance details are not provided.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 30 days
View Details
NAICS: 335929
New
Federal
61--CORD,ELECTRICAL
Solicitation # N0038326QFB02
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia is proceeding with a sole-source procurement for 18 electrical cords, part number 06600-00839-110 and NSN 1R-6145-016986237-H5, under authority of 10 U.S.C. 3204(a)(1) and FAR 6.302, due to the exclusive nature of the item and the government’s lack of ownership or rights to the data required to source it elsewhere. The delivery term is FOB origin, and the acquisition will be conducted through the existing Basic Ordering Agreement N00383-26-G-P401 with Sikorsky, as no alternative suppliers can meet the requirement. All responsible entities may submit capability statements, but only Sikorsky is anticipated to provide an acceptable offer, and no competition will be pursued unless compelling contrary evidence arises. Any firm not already approved to manufacture the item must submit a Source Approval Request, though the procurement will not be delayed for such approvals. The acquisition will follow FAR Part 15 procedures, excluding commercial item policies under FAR Part 12 due to the custom, non-commercial nature of the item. The solicitation is not a small business set-aside and will be managed electronically through NECO, with no hard copies or phone requests accepted. Submissions of qualifications must be sent via email to the designated point of contact by the September 18, 2026 deadline, and responses received within 45 days of the synopsis posting may be considered for future competitive intent assessments.
Other Communication and Energy Wire Manufacturing

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
16--CCA,SBC,LDS,4V,FC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNA57
The contract pertains to the repair or modification of 16 CCA, SBC, LDS, 4V, FC units under solicitation number N0038326QNA57, with a quantity of ten units to be delivered FOB origin. All terms and conditions outlined in the base contract BOA N00383-23-G-DT01 are fully applicable. The solicitation was posted on August 4, 2026, with responses due by September 18, 2026, and is managed by the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense. The performing office is located in Philadelphia, Pennsylvania, and all work is expected to be coordinated through the designated point of contact, Alyssa T. Thieu, who can be reached via email or phone. No set aside classification is specified, and the place of performance details are not provided.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 9 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334517
New
Federal
FMS REPAIR REQUIREMENT FOR THE COUNTRY OF AUSTRALIA NIIN: 016893937 I P/N: 720200-05-00
Solicitation # N0038325Q0137
NAVSUP Weapon Systems Support (NAVSUP WSS) in Philadelphia has issued a solicitation to identify parties capable of providing repair services for a specific component, designated by NSN 5855-01-689-3937 and part number 720200-05-00, used in the F-18 aircraft. The repair requirement is intended to support Foreign Military Sales (FMS) for Australia. This procurement is conducted under the authority of FAR 6.302-1, indicating that the Government plans to negotiate with only one source, though all interested and qualified sources are encouraged to submit capability statements by 2:00 PM Eastern Time on October 30, 2025. The Government may exercise discretion in its decision to open the contract to competition, and only sources approved through the established Source Approval Request procedures will be considered without delay to the award. If a prospective contractor is not yet an approved source, they must submit a detailed package as described by the NAVSUP-WSS Source Approval Information Brochure for Repair. The contract opportunity, posted under solicitation number N0038325Q0137, is not set aside for small business or other specific categories, though it is classified as an 8(a) Sole Source under NAICS 334517. The place of performance is Fort Worth, Texas, and any questions or proposals should be directed to the primary point of contact, Hayden Young, at the provided email and phone number. Additional information and procedures for source approval can be found on the NAVSUP Weapon Systems Support Business Opportunities webpage.
Irradiation Apparatus Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 3 days
View Details