Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pressure-Sensitive Adhesive Plastic Sheeting Supply

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the manufacture or sourcing of 92 rolls of black, pressure-sensitive adhesive plastic sheeting. Each roll must measure 15 inches by 50 yards and include track holes specifically designed for stencil machines. The materials are intended for prime contractors fulfilling DLA Troop Support supply contracts and must be delivered FOB Origin to New Cumberland. Strict adherence to technical and regulatory standards is mandatory, including packaging requirements per RA001, RP001, and ASTM D3951, and labeling according to MIL-STD-129. Additionally, the provider must ensure full compliance with the Buy American Act. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 325211, with a response deadline of November 9, 2026.

General Info

DoD subcontract for 92 adhesive plastic sheeting rolls, due November 9, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

325211 - Plastics Material and Resin Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E5-27-T-0329.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLASTIC SHEET, PRESSURE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies black, pressure-sensitive adhesive plastic sheeting for prime contractors delivering DLA Troop Support supply contracts. Manufactures or sources 15-inch by 50-yard rolls containing track holes for stencil machines. Packages materials per RA001, RP001, and ASTM D3951, with labeling adhering to MIL-STD-129. Requires Buy American Act compliance. Delivers 92 rolls of specialized plastic sheeting FOB Origin.

Similar Contracts

Same NAICS industry code

SOLAS-Grade Reflective Tape and Marine Plastic SupplierThis subcontract opportunity, managed by Construction & Equipment MRO SVC I for the Department of Defense, seeks a supplier for raw materials used in DLA lifesaving equipment. The scope of work involves providing SOLAS-approved high-visibility reflective tape and UV-stabilized, hard-shell unicellular plastic resins or pre-formed shells in International Orange. All supplied materials must be certified for use in SOLAS-compliant apparatus and strictly adhere to mercury-free requirements for delivery to the manufacturer. The contract is designated as a Total Small Business Set-Aside under NAICS code 325211, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

Fuel-Resistant Membrane SupplierThis subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, seeks a supplier for fuel-resistant membranes and reinforced polymer sheeting. The selected provider will deliver high-strength, hydrocarbon-impermeable materials in either rolls or pre-cut sheets to prime contractors. A critical requirement of the contract is strict adherence to the Berry Amendment, ensuring all polymers are domestically sourced, and the provision of all necessary material certifications. The project is designated as a Total Small Business Set-Aside under NAICS code 325211, with the place of performance located at Fort Sill. Interested parties must submit their responses by November 9, 2026. This procurement focuses on providing essential containment materials that meet rigorous military specifications for fuel resistance and durability.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Luminous Tape SupplierThis HUBZone set-aside subcontract involves the supply of 391 rolls of luminous tape, measuring 1 inch by 50 yards, to support prime contractors delivering DLA Troop Support supply contracts. The materials must meet NSN 9390-01-462-6814 and be equivalent to products from 3M or Jessup Manufacturing. All supplies are to be delivered FOB Origin to DLA Distribution San Diego. The contractor must ensure strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and 29 CFR 1910.1200 for HazMat identification. This requirement falls under NAICS code 325211 and is managed by the Department of Defense in San Diego, with a response deadline of November 9, 2026.

POSTED

about 1 hour ago

DEADLINE

Custom Cushioning Foam Insert ManufacturerThis subcontract involves the fabrication of a specialized cushioning foam insert pad for the DLA Weapons Support Land Supply Chain. The manufacturer must produce the pad in accordance with Gemstar part number 0322873-015 and drawing 1X4F3 AMSCBDOC, ensuring that no Class I ozone-depleting chemicals are used in the process. Compliance with the Berry Amendment is mandatory, and the manufacturer must obtain source approval from the Original Equipment Manufacturer. The project requires strict adherence to packaging and marking standards, specifically ASTM D3951, RP001, and MIL-STD-129. Performance will take place in Fort Hood, Texas, under NAICS code 325211. The contract focuses on the delivery of a single cushioning foam insert pad to support prime contractors within the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Raw Fiber Material SupplyThis subcontract, titled Raw Fiber Material Supply, involves the sourcing and delivery of bulk high-tenacity synthetic or natural fiber filaments and yarns. These materials must meet specific strength and durability standards to support prime contractors in the production of rope assemblies for Department of Defense supply contracts. A critical requirement of the agreement is strict adherence to domestic origin specifications as outlined in Section K. The contract is managed under NAICS code 325211 and requires the delivery of raw fiber materials and spools. Performance for this contract will take place in Tracy, California. Interested parties must note the response deadline of November 9, 2026, to be considered for this procurement effort.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

Nonmetallic Hose Raw Material SupplyThis subcontract involves the supply of raw nonmetallic polymers, elastomers, and reinforced tubing materials to prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The selected provider must supply mercury-free, high-grade materials that strictly adhere to the DLA Master List of Technical and Quality Requirements. All deliveries must be accompanied by Certificates of Conformance to the manufacturer to ensure quality and technical standards are met. The contractor is required to certify the origin of all materials to maintain full compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 325211. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

Supply of Industrial Plastic Sheets (NSN 9330013139713)This subcontract involves the supply of 16 industrial-grade plastic sheets measuring 48 by 48 inches with a thickness of .500 inches to support prime contractors delivering DLA supply contracts. The project is managed under the Department of Defense at Warner Robins, with the place of performance located at Robins Air Force Base. The contractor is responsible for manufacturing or sourcing the materials and ensuring strict adherence to technical standards, including packaging per ASTM D3951, hazardous material determination per FED-STD-313, and shipment marking per MIL-STD-129. Additionally, the provider must maintain compliance with DFARS 252.204-7012 regulations.

POSTED

about 1 hour ago

DEADLINE

TUBING, PLASTIC, SPIRAL

Solicitation # SPE8E5-27-T-0358

Solicitation SPE8E5-27-T-0358 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of one unit of plastic spiral wrap tubing, identified by NSN 9330-01-654-0376 and part number 1-5-0008-M. The item is to be delivered FOB Origin to Camp Humphreys in Pyeongtaek, South Korea, with a required delivery date of October 27, 2026, and a delivery window of five days after the award. Inspection and acceptance will take place at the destination per FAR 52.246-1. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging data, MIL-STD-129 for marking, and RP001 for palletization. It incorporates various federal and defense regulations, such as the Buy American Act, DFARS 252.204-7012 for safeguarding covered defense information, and specific requirements for the handling and labeling of hazardous materials per IP025 and FAR 52.223-3. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors must submit quotes via the DIBBS portal and maintain active registration in the System for Award Management.

Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

RAMP, MOBILE, CONTAINER

Solicitation # SPE8EF-27-T-0195

Solicitation SPE8EF-27-T-0195 is a fixed-price procurement issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the supply of six mobile container loading ramps, identified by NSN 3990015848958. The requirement is managed under the First Destination Transportation program to utilize government-arranged transportation. Delivery is required within 167 days after the order date, with a need ship date of April 26, 2027, and an original required delivery date of June 2, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically citing the DLA Master List, which takes precedence over ASTM D3951. Packaging must comply with RP001 and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program. Additionally, the contractor must adhere to cybersecurity standards for safeguarding covered defense information and report cyber incidents per DFARS 252.204-7012. Quotations were due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE8E5-27-T-0313

This solicitation, issued by DLA Troop Support Construction and Equipment, is a small business set-aside for the procurement of 432 natural color plastic sheets. The specified material is polyhexamethylene adipamide, measuring 0.040 inches thick, 12 inches wide, and 12 inches long, identified by NSN 9330-00-602-5921. Delivery is required within 96 days after the order, with a need ship date of February 14, 2027, and a final required delivery date of March 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Warner Robins at Robins AFB, Georgia. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and specifying that sampling and acceptance follow MIL-STD-105/ASQ Z1.4 with a zero non-conformance requirement. Packaging must comply with RP001 and MIL-STD-129, while identification marking must follow MIL-STD-130N. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and telecommunications equipment restrictions.

POSTED

about 1 hour ago

DEADLINE

PLASTIC SHEET, PRESSURE

Solicitation # SPE8E5-27-T-0329

Solicitation SPE8E5-27-T-0329 is a request for quotes for the procurement of 92 rolls of black pressure-sensitive adhesive plastic sheeting, identified by NSN 9330013271340. The material must be 15.0 inches wide, with each roll consisting of 50 yards, and must include track holes specifically for use with a stencil machine. This is a critical application item with a delivery requirement of 42 days after order. The contract is issued by DLA Troop Support, Construction and Equipment, with shipping destined for the DDSP New Cumberland Facility in Pennsylvania. The procurement is governed by several technical and quality standards, including RA001 and RP001 for packaging and palletization. Inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must comply with ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with all labeling adhering to MIL-STD-129. The solicitation is a total small business set-aside under FAR 19.5 and requires compliance with the Buy American Act and DFARS regulations regarding covered defense telecommunications and cybersecurity reporting. Payment and invoicing must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

PLASTIC STRIP, PRESSURE

Solicitation # SPE8E5-27-T-0333

Solicitation SPE8E5-27-T-0333 is a request for quotations for the procurement of 27 rolls of pressure sensitive adhesive plastic strips, identified by NSN 9330-01-428-7082. The item is designated as a critical application item with a non-extendable shelf life of 24 months, corresponding to shelf life code M. Delivery is required within 55 days after receipt of order, with a need ship date of July 13, 2026, and an original required delivery date of February 4, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Due to the nature of the materials, the contractor must comply with IP025 for hazardous materials shipping and the Hazard Communication Standard for labeling. Inspection and acceptance will occur at the destination. Administratively, the contract is managed by DLA Troop Support, Construction and Equipment, and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment processing. It incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and prohibitions on certain telecommunications equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Supplier of Electrical Immersion Heating Elements (NSN 4520-01-579-9647)This subcontract involves the manufacture or procurement of 59 electrical immersion heating elements, identified by NSN 4520-01-579-9647, to support prime contractors fulfilling DLA supply contracts. The Department of Defense, specifically the DDSP New Cumberland Facility, requires that all units strictly adhere to Engineering Support Activity acceptability standards. The selected supplier must maintain an active SAM registration and is responsible for preparing the units for shipment under FOB Origin terms. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335999, with a response deadline set for November 9, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

Air Conditioner Kit Supplier (NSN 4120-01-628-1437)This subcontract involves the supply of 12 complete air conditioner kits for prime contractors supporting DLA Troop Support supply contracts. The hardware must strictly adhere to NSN 4120-01-628-1437 and the DLA Master List of Technical and Quality Requirements. Additionally, the supplier is responsible for ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The contract requires full compliance with the Buy American Act and the Berry Amendment, with delivery of the 12 kits handled as FOB Origin. This opportunity is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. Responses are due by November 9, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Lighting Fixtures (NSN 6210-01-674-7816)This subcontract involves the manufacture or sourcing of eight specialized lighting fixtures identified by NSN 6210-01-674-7816 for the Department of Defense, specifically supporting the DDSP New Cumberland Facility. The contractor is responsible for ensuring all units meet strict technical specifications and comply with regulations regarding covered defense telecommunications equipment. Additionally, the provider must supply all necessary Material Safety Data Sheets and hazard warning labels for any hazardous materials included. The project falls under NAICS code 335132 and is designated for performance in New Cumberland, Pennsylvania. Interested parties must adhere to the timeline established by the posting date of October 28, 2026, with a final response deadline of November 9, 2026.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 1 hour ago

DEADLINE

First Destination Transportation (FDT) ServicesThis subcontract for First Destination Transportation services involves performing transport and delivery for prime contractors on DLA Troop Support projects. The selected provider is responsible for coordinating shipments from the manufacturer to the DDSP New Cumberland Facility, ensuring all shipping documentation adheres to the DLA First Destination Transportation program guidelines. A critical requirement of the contract is the maintenance of environmental controls to preserve the 24-month shelf-life of the decals being transported. The project is managed under NAICS code 484220 for the Department of Defense. All shipments must be successfully delivered to the DDSP New Cumberland Facility in New Cumberland by November 21, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 1 hour ago

DEADLINE

Specialized Decal ManufacturingThis subcontract for Specialized Decal Manufacturing involves the production and delivery of 48 finished decals for prime contractors supporting DLA Troop Support projects at the DDSP New Cumberland facility. The manufacturer must fabricate the decals according to NSN 7690-00-880-7292 technical data specifications, ensuring strict adherence to Type I shelf-life compliance with a 24-month limit. All deliverables must meet MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. To be eligible, the provider must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. Additionally, participation in the US/Canada Joint Certification Program is required. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 323117.

POSTED

about 1 hour ago

DEADLINE

Supplier of Circulating Fans (P/N 2673213-P4)This subcontract involves the manufacture or sourcing of 18 circulating fans, part number 2673213-P4, to support prime contractors delivering on DLA Troop Support contracts. The units must strictly conform to Basic Drawing NR 10001 2673213, Revision L, and be delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. The supplier is required to adhere to rigorous quality and safety standards, including Critical Application Item quality assurance and DFARS 252.223-7001 regarding hazardous materials. Additionally, all packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The opportunity is categorized under NAICS code 333996 for the Department of Defense.

Fluid Power Pump and Motor Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Dome Lights (NSN 6220123995823)This subcontract opportunity is for the manufacture and supply of 19 dome light units, identified by NSN 6220123995823, to support prime contractors delivering on Department of Defense supply contracts. The selected provider must ensure all items are packaged according to MIL-STD-2073-1E and RP001 standards and marked in compliance with MIL-STD-129. Final delivery of the units is required at the DLA Distribution DDSP New Cumberland Facility. This is a total small business set-aside under NAICS code 334418. Interested parties must maintain an active SAM registration to be eligible for award. The response deadline for this requirement is November 9, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging SupplierThis subcontract opportunity with the Department of Defense, specifically the DDSP New Cumberland Facility, seeks a supplier to provide specialized packaging materials and packing services for prime contractors supporting DLA Troop Support contracts. The selected provider must ensure all materials comply with MIL-STD-2073-1E, execute Preservation Method 31, and utilize Cushion/Dunnage Material JB as required by the packaging data. The final deliverable consists of shipments that are properly packed and marked for FOB Origin transport. The project is categorized under NAICS code 488510 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

Freight Transportation Arrangement

POSTED

about 1 hour ago

DEADLINE

Identification Marker ManufacturerThis subcontract involves the manufacture and supply of 88 Identification Markers under NSN 7690-01-113-1215 for prime contractors supporting DLA Troop Support. The selected provider must fabricate the markers according to strict NSN specifications, ensuring markings adhere to MIL-STD-129 and special marking code 32 for shelf life. Packaging must be completed in accordance with MIL-STD-2073-1E and RP001, with final delivery terms set as FOB Origin. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. Due to the nature of the work, the contractor must maintain CMMC Level 2, DFARS 252.204-7012, and ITAR/EAR compliance. Interested parties must submit their responses by November 9, 2026, for performance at the New Cumberland location.

All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Troop Support Construction and Equipment projects. The scope of work involves the secure packaging, marking, labeling, and palletization of 32 adapters. All services must be performed at the New Cumberland facility in accordance with strict military standards, specifically ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. The project requires the use of MIL-SPEC packaging materials and specialized palletization equipment to ensure shipment integrity. This opportunity is managed under the Department of Defense through the DDSP New Cumberland Facility, falling under NAICS code 488410. The response deadline for this requirement is November 9, 2026.

Motor Vehicle Towing

POSTED

about 1 hour ago

DEADLINE

Fabrication of Air Conditioning-Heating Adapters (NSN 4520016608564)This subcontract involves the fabrication of 32 air conditioning-heating adapters under NSN 4520016608564 for prime contractors supporting DLA Troop Support Construction and Equipment projects. The work is managed by the Department of Defense through the DDSP New Cumberland Facility. Manufacturing must strictly adhere to Basic Drawing 30554 04-21639 and Reference Drawing 30554 04-20370, while meeting quality standards RA001, RP001, and RQ011. The project requires the use of precision machining equipment and full compliance with DFARS 252.204-7012 regulations. All 32 completed adapters are to be delivered FOB Origin. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Waste Drain Strainers (NSN 4510016493042)This subcontract opportunity is for the supply of 237 waste drain strainers, part number DD 20 C 100 (NSN 4510016493042), to support prime contractors delivering on Department of Defense supply contracts. All units must be manufactured in strict accordance with Reference Drawing NR 53711 6983511, Revision NR C, and delivered to the designated DLA receiving office. Bidders are required to provide the Unique Entity Identifier (UEI) and CAGE code of the producing entity. The procurement is designated as a Total Small Business Set-Aside under NAICS code 423840 and is managed by the DDSP New Cumberland Facility. Interested parties must submit their responses by November 9, 2026, for performance at the New Cumberland location.

Industrial Supplies Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PLASTIC STRIP, PRESSURE

Solicitation # SPE8E5-27-T-0328

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS