Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PROBE, TEST

Active
SPE7M2-26-T-5787Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of two units of a probe and test item identified by NSN 6625-01-669-1718 and part number FB-SD101 from Viasol Solutions LLC, with a total contract value of $2.00 per unit. Delivery is required within 161 days under FOB origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special marking required. All packaging and palletization adhere to DLA’s standardized requirements, and the item may contain batteries, triggering applicable handling protocols. The delivery location is DLA Distribution San Joaquin in Tracy, California, with the same address used for both shipping and parcel post. The original required delivery date is March 5, 2027, though the need ship date is January 19, 2027. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M2-26-T-5787, posted July 29, 2026, with responses due by August 10, 2026, and falls under NAICS code 334514 for the Department of Defense’s Nuclear Reactor Program.

General Info

Procure two probe units at $2 each, deliver by Jan 19, 2027, to Tracy, CA, per MIL-STD packaging and DLA requirements.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PROBE,TEST
PROBE,TEST
RQ035: ITEM MAY CONTAIN BATTERIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
VIAVI SOLUTIONSLLC 51190 P/N FB-SD101
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017603784 0001 EA 2.000
NSN/MATERIAL:6625016691718
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:D3 OPI:M
SPE7M2-26-T-5787
SECTION B
PR: 7017603784 PRLI: 0001 CONT’D
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/19/2027 Original Required Delivery Date:03/05/2027
SPE7M2-26-T-5787 NSN/Part Number: 6625-01-669-1718 Quantity: 2 EA Purchase Request: 7017603784QTY: 2 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334514
New
DIBBS
SIGNAL PROCESSOR UN
Solicitation # SPE7M9-26-Q-0034
The contract is for the procurement of 20 units of a Signal Processor UN with NSN 6625-01-241-7043 under solicitation SPE7M9-26-Q-0034, with a delivery requirement of 750 days after order. The solicitation is issued by the Department of Defense, specifically the Electrical Devices Division, and is subject to strict cybersecurity and compliance standards including CMMC Level 2 certification for any third-party assessment organization involved. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issuance or award date depending on acquisition scale. The item contains technical data subject to export controls under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, whether in the U.S. or abroad, and mandates that only contractors approved by DLA with JCP certification, completed export control training, and approved access may handle the data. DFARS 252.225-7048 applies to the protection of this controlled technical data. Additional requirements include adherence to DLA packaging standards, removal of government identification from rejected supplies, inspection and acceptance at the origin, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, and all responses must be submitted by August 3, 2026, with Jennifer Hopkins listed as the primary point of contact.
ELECTRICAL DEVICES DIV

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334514
New
Federal
NAVIGATIONZLGHTZWHI
Solicitation # N0010426QFF39
This contract pertains to the procurement of a NAVIGATION LIGHT WHITE designated as SPECIAL EMPHASIS Material (Level I), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly conform to NAVSEA drawings 5486638 and 5486639, with all non-metallic components meeting NAVSEA SS800-AG-MAN-010/P-9290 toxicity and flammability standards. Mandatory testing includes a 10-cycle submersion pressure test at 134 psig with specific dwell times, or an alternative 1500 psig one-hour hydrostatic test per MIL-DTL-24560, with pressure tolerances tightly controlled based on test range and gauge graduation. All threads must be inspected per FED-STD-H28 System 21 or equivalent, and mercury or mercury-containing compounds are strictly prohibited. The contractor must maintain ISO-9001 quality system compliance with ISO-10012 and ISO/IEC 17025 calibration standards, or an acceptable MIL-I-45208 and MIL-STD-45662 alternative, subject to government audit and source inspection. All deliverables require full traceability from raw material to final component via permanent markings, documented through Objective Quality Evidence (OQE), with records preserved for at least seven years. Certification of Compliance must be unqualified, 100% inspected, and include detailed documentation of test parameters, gage calibration, and authorized signatures. Sampling follows a zero-defect acceptance criterion, with 100% verification of all test reports and traceability links. Government Source Inspection is required at the contractor’s facility, and subcontractors must be contractually bound to the same quality controls. Delivery is FOB destination, with final shipment contingent on prior submission and acceptance of certification data by Portsmouth Naval Shipyard via WAWF, using specified SHIP TO, INSPECT BY, and ACCEPT BY codes and email notifications. The contract mandates compliance with Buy American and Defense Priorities and Allocations System (DPAS) requirements, prohibits unauthorized deviations without written approval from the Contracting Officer, and requires all ECPs and waivers to be processed through ECDS, with final documentation submitted via WAWF. The solicitation is a total small business set-aside with a response deadline of September 4, 2026, and access
Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334514
New
SLED
145991R1 Meter Test Equipment and Accessories
Solicitation # 231138
The City of Los Angeles is soliciting bids for Meter Test Equipment and Accessories under solicitation number 231138, with a response deadline of August 12, 2026. The contract is managed by the Department of Water and Power and requires vendors to submit proposals for specialized equipment used in testing water meters, along with necessary accessories to support accurate calibration and maintenance operations. All performance activities are expected to occur within Los Angeles, specifically at the 90012 zip code location. Interested parties must register on the City’s official procurement portal to participate, and all questions regarding bid language, requirements, or discrepancies must be directed to the originating department contact, Justin Lin at justin.lin@ladwp.com. The bid is open to qualified suppliers without specific set-aside designations, and while general information is provided, full details are available only through the City’s official channels. Biddingo.com is not responsible for the accuracy or completeness of external site content linked from this posting.
City of Los Angeles

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
SLED
Distance Meter
Solicitation # 645-RFQ-2967-2027
The Iowa Department of Transportation is soliciting competitive quotes for a Distance Meter under solicitation number 645-RFQ-2967-2027, with responses due by July 31, 2026, at 6:00 PM Central Time. The solicitation was posted on July 28, 2026, and is open to all qualified vendors without set-aside restrictions. The contract is managed by the Iowa DOT’s Transportation division, with performance expected to take place in Story County, Iowa, and correspondence should be directed to Tanner Thomsen, the primary point of contact, via email at tanner.thomsen@iowadot.us or phone at 515-233-7829. The official bid opportunity can be reviewed online through the Iowa DOT’s procurement portal, and all submissions must comply with the terms outlined in the solicitation to be considered for award.
Transportation

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334514
New
SLED
Refrigeration Monitoring System Design and IntegrationThe contract pertains to the engineering and integration of environmental monitoring systems specifically designed for refrigeration units across facilities operated by the Texas Department of Criminal Justice. It involves the deployment of IoT sensors to continuously collect data on temperature, humidity, and other critical environmental parameters, with seamless integration into existing SCADA and BMS platforms to enable real-time monitoring, alerts, and data analytics. The work is focused on ensuring compliance with regulatory standards for food storage and medical supply preservation within correctional facilities, requiring robust system design that accommodates diverse infrastructure and operational environments. Subcontracting activity is authorized under NAICS code 334514, indicating a focus on industrial and commercial hvac and refrigeration equipment manufacturing, though the deliverables center on system integration rather than hardware production. The solicitation is open for responses until August 11, 2026, with no set-aside provisions specified. Performance will occur across multiple TDCJ locations statewide, though exact site details are not provided. All technical execution must align with the agency’s operational requirements, emphasizing reliability, cybersecurity, and remote accessibility for facility personnel. Interested parties must submit proposals through the TX SMARTBUY portal by the stated deadline.
Texas Department of Criminal Justice

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
Signal Processor Unit Manufacturing & AssemblyThe contract requires the complete design, fabrication, integration, testing, and delivery of 11 military-spec Signal Processor Units that must fully comply with Defense Logistics Agency standards, all applicable MIL-STD specifications, and strict U.S. export control regulations. These units are critical for defense applications and must meet exacting performance, durability, and security requirements to ensure operational readiness in field-deployed environments. The work is scoped under a subcontract arrangement with a firm deadline for responses by August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The effort falls under NAICS code 334514, which classifies it within the electronic component and product manufacturing sector, and is administered by the Department of Defense through its Maritime Supply Chain organization. While no specific set-aside or small business preferences are indicated, full compliance with governmental defense standards is mandatory, and all deliverables must be traceable, documented, and certified to meet defense-grade quality and security protocols. The contract is publicly available through the DIBBS system with the solicitation reference SPE7M126T236R, and any prospective bidder must ensure alignment with all federal, military, and export compliance obligations before submission.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
SIGNAL PROCESSOR UN
Solicitation # SPE7M1-26-T-236R
The contract pertains to the procurement of 11 units of a Signal Processor under NSN 6625-01-241-7043, issued by the Department of Defense through the Maritime Supply Chain organization. It is governed by stringent cybersecurity and quality standards, including mandatory CMMC Level 2 certification for third-party assessors and adherence to the DLA Master List of Technical and Quality Requirements. The technical data associated with this item is subject to export controls under either ITAR or EAR, restricting any disclosure or transfer to foreign persons, including foreign nationals within the U.S., and requiring prior governmental authorization for export. Only contractors with approved JCP certification, completed DOD export control training, and explicit DLA approval may handle this data. Additional requirements include compliance with DLA packaging guidelines, removal of government identification from rejected items, inspection and acceptance at the manufacturer’s origin, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. The solicitation, numbered SPE7M1-26-T-236R, was posted on July 28, 2026, with a response deadline of August 10, 2026, and a delivery window of 859 days after delivery order issuance. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The NAICS code 334514 categorizes the procurement under navigation, measurement, and control instrument manufacturing. The primary point of contact for inquiries is Bernadine Davis-Sheets, reachable via email and phone, and all submissions must be made through the DIBBS portal. The contract type is a solicitation with no set-aside designation, and it applies Federal procurement rules without exception, emphasizing compliance with regulatory, security, and logistical mandates from the Defense Logistics Agency.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334514
New
DIBBS
BORESIGHTING EQUIPM
Solicitation # SPE4A6-26-T-08BJ
The contract covers the delivery of two units of bore sighting equipment, identified by NSN 4920015504853 and part number 5750010100-1, manufactured by Essex Industries Inc. with CAGE code 83533, in accordance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards. The item is classified as a critical application and is subject to stringent quality controls including sampling per MIL-STD-1916 or ASQ H1331, with zero non-conformances required in sampled lots unless otherwise specified, and non-critical attributes treated as major unless defined otherwise in governing documents. Packaging and marking must strictly comply with MIL-STD-129 and ASTM D3951, though DLA requirements supersede the latter; palletization must adhere to RP001, and all shipping labels must be properly formatted with correct Unit of Issue and Quantity per Unit Pack. While IUID compliance per MIL-STD-130 is typically mandated, it is explicitly waived for this contract under DFARS 252.211-7003(c)(1)(i). The contractor must adhere to cybersecurity requirements including CMMC Level 2 self-assessment and comply with DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on covered telecommunications equipment under DFARS 252.204-7018 and hexavalent chromium restrictions under DFARS 252.223-7008. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129, and no storage, treatment, or disposal of toxic materials is permitted on government installations without prior written authorization. Delivery is scheduled to occur within 158 days after order, with FOB Origin terms, and all items must be delivered to the designated DLA distribution facility in New Cumberland, Pennsylvania. Payment is exclusively processed through WAWF, with paper invoices prohibited unless system failure occurs. The solicitation is a total small business set-aside under NAICS code 334514, requiring offerors to submit valid UEI and CAGE codes and accurately represent their size and socioeconomic status; no pricing details are provided in the solicitation. All contract clauses
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 334514
New
DIBBS
VOLTMETER
Solicitation # SPE7M0-26-T-021C
The contract pertains to the procurement of one voltometer with NSN 6625-01-680-6309 and part number 083-75VB-RSRS-C6, issued under solicitation SPE7M0-26-T-021C by the Department of Defense through the Maritime Supply Chain ESOC Buys organization. Delivery is required within five days of award, FOB origin, to the designated receiving facility at Tobyhanna Army Depot in Pennsylvania, with shipment required via the fastest traceable means excluding parcel post. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements, and the contract incorporates Defense Logistics Agency packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes applied. The voltometer may contain batteries, triggering additional handling and compliance protocols, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. The unit of issue is EA, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s procurement requirements including palletization, container codes, and preservation methods as specified. The point of contact for inquiries is Gerard Quinn, and the response deadline for the solicitation is August 10, 2026, with an original required delivery date of July 27, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334514
New
DIBBS
NRP, OSCILLOSCOPE AS
Solicitation # SPE7M0-26-T-019E
This contract is for the procurement of one unit of a NRP oscilloscope with NSN 6625-01-620-5187, issued under solicitation SPE7M0-26-T-019E by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of contract award, with FOB destination as the delivery term and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the item must be packaged in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, including compliance with MIL-STD-129 marking standards and specific preservation, packaging, and container codes. The oscilloscope must conform to technical drawing revisions dated May 5, 2022, and is subject to cybersecurity maturity model certification Level 2 self-assessment and requirements for covered defense information. The item may contain batteries and must be shipped by traceable means, not parcel post, to the USS Essex LHD 2 at FPO AP 96643. All technical and quality requirements are governed by the DLA Master List, and configuration changes require formal engineering change proposals or variance requests. The original required delivery date is July 24, 2026, and full and open competition applies. The point of contact is Gerard Quinn, with the contract managed under government-specific tracking codes for processing and distribution.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
MULTIMETER
Solicitation # SPE7M0-26-T-009B
This contract solicits 40 units of a multimeter with National Stock Number 6625-01-664-0668, manufactured by Extech Instruments Corporation under part number EC600, under a Total Small Business Set-Aside (FAR 19.5) for NAICS Code 334514. The solicitation, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, requires delivery within five days of award to the Naval Air Warfare Center Weapons Division in China Lake, California, with FOB Origin terms and shipment by the fastest traceable means—parcel post is prohibited. The item is classified as a Type I (Code H) shelf-life item with a non-extendable 12-month shelf life and must comply with MIL-STD-2073-1E packaging standards, including QUP 001, preservation method 41, and pack code U, with marking adhering to MIL-STD-129 and no special marking required. Palletization must follow DLA’s RP001 requirements. The offeror must provide a completed Safety Data Sheet and OSHA-compliant hazard communication label at the time of quotation if the product contains hazardous materials as defined by FED-STD-313 and FAR 52.223-3, and must update this information during contract performance if additional hazardous components are identified. The multimeter may contain batteries, and the contractor bears full liability for safety of personnel and property regardless of compliance. The contract incorporates DLA’s Master Solicitation for Automated Simplified Acquisitions Revision 105 with applicable FAR and DFARS clauses, including NIST SP 800-171 cybersecurity requirements (Deviation 2026-O0025), subcontracting rules for commercial items (Deviation 2026-O0015), and mandates compliance with the Berry Amendment and Buy American Act. The award may be made to a HUBZone small business using price evaluation preference, and automated award may apply. Contractors must be registered in SAM, submit invoices via WAWF, and maintain electronic business contact information. The bid deadline is July 27, 2026, and proposals must be submitted through the DLA Internet Bid Board System. Certification of cost or pricing data is required under DFARS deviation 2026-00048, and the item
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 334514
New
DIBBS
TESTER, VIBRATION SE
Solicitation # SPE7M0-26-T-8374
The contract pertains to the procurement of one unit of a Vibration Tester, Model REF2510R, assigned NSN 6625-01-674-9205, sourced from AMPHENOL (MARYLAND) INC. The item is subject to DLA packaging requirements as outlined in RP001, with specific packaging standards aligned to MIL-STD-2073-1E and marking in compliance with MIL-STD-129; no special markings are required. Delivery is FOB destination within five days of contract award, with zero tolerance for quantity variance, and inspection and acceptance both occur at the destination. The item may contain batteries, and government identification must be removed from any non-accepted supplies. Shipping must be conducted via the fastest traceable means, explicitly prohibiting parcel post, and directed to the FPO address USS CARL VINSON CVN 70, with shipment logistics governed by DLAD PROC NOTES C19 and C20. The contract reference SPE7M0-26-T-8374, issued by the Department of Defense’s Maritime Supply Chain ESOC, specifies the required delivery date as May 20, 2026, and includes detailed technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements. The point of contact for inquiries is Gerard Quinn, with a DIBBS link provided for solicitation details, and the NAICS code 334514 identifies the classified industry sector for the equipment.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

3 days ago

DEADLINE

in about 11 hours
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M2-26-T-5788
This contract specifies the procurement of electrical insulation tape, each roll measuring 100 feet, with the unit of issue designated as RO=100FT. A total of 112 rolls are required under purchase request 7017520040, to be delivered within 154 days FOB origin with no tolerance for quantity variance. The material must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, including palletization as outlined in DLA Packaging Requirements. The tape is classified as a critical application item with no shelf life requirement, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for specified functional uses such as in batteries, fluorescent lamps, or instruments, which must then include a secondary containment boundary as mandated by NAVSEA 5100-003D. The item is supplied under NSN 5970-01-018-4304 with approved part numbers from 3M Company and Astilleros Neumáticos Duarry SA, and all documentation and compliance requirements must be met for source approval and shipment. Delivery is to be made to Bremerton, Washington, with inspection and acceptance taking place at the destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ROD
Solicitation # SPE7M2-26-T-5783
This contract pertains to the procurement of two units of item NSN 1710-00-564-1865 under solicitation SPE7M2-26-T-5783, with a delivery deadline 161 days after contract award. The item is classified as containing technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or Commerce. Access to this technical data is restricted to DLA contractors who possess an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from DLA to handle such data. DFARS 252.225-7048 governs compliance. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with performance occurring in New Cumberland, Pennsylvania, and all responses must be submitted by August 10, 2026. Primary point of contact is Alisha Blanton at DLA.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M2-26-Q-0691
The contract specifies the procurement of a digital microcircuit with NSN 5962-01-730-8483, requiring strict compliance with DLA technical and quality standards referenced through R and I numbers from the DLA Master List, including inspection at origin, qualified supplier and testing list requirements for FSC 5961 and 5962, and traceability documentation retention under DLA Procurement Note C03. The item must be sourced from qualified suppliers and meet stringent physical marking standards per IPC/JEDEC J-STD-609 for lead finish identification, with all packaging and labeling governed by MIL-STD-129 and DLA packaging directives. The microcircuit is designated as ESD and EMI sensitive, mandating compliant protective packaging per MIL-PRF-81705 using only qualified materials from QPL-81705, with ESD and EMI safeguards applied at approved workstations, and physical protection to prevent lead damage during handling and shipment. The contract mandates a first article test requirement unless waived, with government source inspection valid only if the test is invoked; otherwise, inspection at destination is acceptable. Packaging must follow MIL-STD-2073-1E with specific preservation methods and unit container codes, and palletization must adhere to RP001. The item is subject to a mercury prohibition, except in defined functional applications, and must be properly marked with special ESD designation ZZ. Delivery is required within 100 days after order award to Columbus, Ohio, for 25 units at a fixed quantity with zero variance, under a total small business set-aside. The supplier must verify full compliance with all referenced standards and maintain supply chain traceability, with technical data incomplete but still requiring the item to meet the cited specifications alongside the part number requirements.
Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
HARDWARE KIT, MECHANIC
Solicitation # SPE7M2-26-T-5786
This contract pertains to the supply of a hardware kit and mechanic equipment identified by NSN 5340-01-738-2030 and part number 748669-K02, with a quantity of four units to be delivered within 154 days from the contract award. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E Appendix D for kits, marking per MIL-STD-129, and palletization under DLA’s packaging guidelines. The hardware must not contain intentionally added mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging and preservation methods must align strictly with the specified military standards, and all shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by the DLA’s procurement protocols and transportation directives, with required documentation including source approval requests, configuration change management, and variance requests where applicable. The solicitation was issued on July 29, 2026, with a response deadline in August 2026, and the original required delivery date is April 9, 2027.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5782
The contract specifies the procurement of two units of a military-grade connector receptacle with NSN 5935-01-666-5493, manufactured to the MS27505E13F4S standard in accordance with MIL-DTL-38999N Revision N dated September 14, 2023, and referenced against MS27505G Revision G dated October 29, 2024. All components must originate exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List, and commercial substitutes are strictly prohibited without prior written government authorization. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the delivery point. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 requirements. The items are to be shipped via the fastest traceable means, excluding parcel post, to the USS GERALD R FORD CVN 78 at FPO AE 09523. The contract mandates use of the designated vendor shipping method and references specific DLA procedural notes for transportation logistics. The required delivery date is July 27, 2026, with the solicitation issued under contract number SPE7M2-26-T-5782 and managed by the Department of Defense’s Nuclear Reactor Program, with primary point of contact Alisha Blanton.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Raw Materials or Specialty ComponentsThe contract requires the supply of high-purity metals, insulating materials, or specialty components critical to the manufacturing of electromechanical systems qualified by the Department of Defense. All materials must meet strict quality standards with full traceability throughout the supply chain, ensuring compliance with defense-grade specifications and regulatory requirements. The products are intended for use in nuclear reactor systems under the NUCLEAR REACTOR PROGRAM, necessitating precise material integrity and adherence to military-grade performance criteria. Subcontractors must respond by August 3, 2026, with all submissions aligned to the NAICS code 331492, which categorizes other metal working machine shops. The solicitation does not specify set-aside status or geographic restrictions, and performance is not tied to a defined location, but all deliverables must support the DoD’s nuclear infrastructure needs without compromise. Traceability documentation, material certifications, and compliance verification are mandatory, and suppliers must be prepared to demonstrate adherence to defense supply chain security protocols.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Data Protection (CMMC Level 2)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard covered defense information in accordance with DFARS 252.204-7012 and the Cybersecurity Maturity Model Certification Level 2 standards. This subcontract is categorized under NAICS code 541512, indicating it pertains to computer systems design services, and is being issued by the Department of Defense’s Nuclear Reactor Program. The work must ensure that all systems handling sensitive government data meet the rigorous security requirements defined by CMMC Level 2, which includes safeguarding controlled unclassified information through administrative, technical, and physical controls. Compliance with these standards is not optional and must be demonstrated through documented policies, continuous monitoring, and third-party validation. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, indicating a tight turn-around for proposers to submit detailed technical and compliance documentation. The performance location and point of contact are not specified, but the work is associated with a government agency engaged in nuclear reactor operations, suggesting the handling of highly sensitive and mission-critical information. Contractors must be prepared to undergo an official CMMC assessment and provide evidence of implemented security practices, access controls, incident response plans, and continuous monitoring capabilities. Failure to meet these requirements will result in non-compliance and potential termination of the subcontract.
Computer Systems Design Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection Services (Third-Party)The contract requires third-party inspection and acceptance testing services for products under the Nuclear Reactor Program, adhering strictly to MIL-STD-1916 and ASQ Z1.4 sampling standards with defined AQL levels for critical, major, and minor defects. The work involves rigorous quality assurance processes to ensure compliance with military and industry specifications, with inspection outcomes directly tied to product acceptance or rejection based on predefined defect thresholds. The contractor must execute inspections with precision and document results according to the referenced standards, ensuring traceability and accountability across all tested batches. This subcontract is issued by the Department of Defense and is categorized under NAICS code 541330 for scientific and technical consulting services. Responses are due by August 3, 2026, with the solicitation posted on July 28, 2026. The place of performance and point of contact details are unspecified, but the work is expected to support defense-related nuclear reactor systems. Interested parties must review the full solicitation via the provided DIBBS link to understand submission requirements, deliverables, and any additional technical or regulatory expectations beyond the stated sampling standards.
Engineering Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
DIBBS
Specialized Transportation & Delivery to Government DestinationThe contract requires the specialized transportation and delivery of finished goods to a first government destination under strict compliance with packaging, marking, and documentation standards, all to be completed within 150 days of contract award. The work is classified as a subcontract under NAICS code 484220, indicating a focus on specialized freight transportation, and is sourced by the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, allowing a limited window for prospective subcontractors to submit proposals. Although specific location details for the agency or performance site are not provided, the delivery must meet federal government requirements for secure and compliant logistics, likely involving sensitive or regulated materials. Bidders must ensure all operational processes align with government protocols to avoid rejection or delay.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Hazardous & Radioactive Materials Packaging and HandlingThe contract requires comprehensive packaging, labeling, and documentation of hazardous and radioactive materials in strict compliance with MIL-STD-2073-1E and all applicable Department of Defense transportation regulations. The work encompasses all aspects of safe handling, including material identification, protective containment, marking, and regulatory recordkeeping necessary for secure transit and storage. The scope demands adherence to federal standards to ensure operational safety and regulatory compliance across the defense supply chain. This is a subcontract under the NUCLEAR REACTOR PROGRAM within the Department of Defense, solicited under NAICS code 493190 for hazardous materials transportation and storage services. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, indicating a competitive bidding window of one week. Performance location details are unspecified, suggesting flexibility in where services are rendered, but all activities must meet stringent DOD safety and documentation requirements. Interested parties must respond before the deadline to be considered for award.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Traceability & Compliance ManagementThe contract requires end-to-end supply chain traceability for raw materials and components used in defense-related applications, ensuring complete documentation of origin, certifications, and chain of custody in accordance with Department of Defense and DFARS compliance standards. This includes verifying and maintaining records that demonstrate the provenance of all materials, validating supplier certifications, and implementing systems to track materials from source through manufacturing and delivery without gaps or ambiguities. The focus is on securing the integrity of the supply chain against counterfeit, unapproved, or non-compliant inputs, particularly in critical defense systems under the Nuclear Reactor Program. The opportunity is structured as a subcontract with a NAICS code of 541618, indicating services related to management, scientific, and technical consulting. The solicitation was posted on July 28, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense under the Nuclear Reactor Program. While specific location details and point of contact information are not provided, the performance is expected to support defense infrastructure tied to nuclear systems, requiring rigorous adherence to federal compliance frameworks and robust documentation protocols to meet national security standards.
Other Management Consulting Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Precision Manufacturing of Electromechanical ComponentsThe contract seeks qualified manufacturers to produce electromechanical components, including rotary switches, in full compliance with Department of Defense technical specifications and federal regulations. This subcontract requires adherence to legacy production phase-out protocols, ensuring that all components meet existing military standards while transitioning to current compliance requirements without interruption to supply chains. The work must be executed under the Nuclear Reactor Program of the Department of Defense and falls under the NAICS code 332999 for other miscellaneous manufacturing. Bidders must demonstrate the ability to maintain strict quality control and regulatory alignment throughout the manufacturing process, with no tolerance for noncompliance. Responses are due by August 3, 2026, and the opportunity is posted on the DIBBS platform, though specific performance locations and point of contact details are not provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details