Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Product Verification Testing and Quality Assurance

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of Product Verification Testing and Quality Assurance activities in strict accordance with military standards to verify that all products meet contractual specifications and quality requirements, with an explicit expectation of zero non-conformances. This effort involves comprehensive inspection and testing protocols to ensure full compliance throughout the production and delivery process, emphasizing rigorous quality control and adherence to defense-grade benchmarks. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, and it falls under the NAICS code 541380, which pertains to other scientific and technical consulting services. The solicitation was posted on July 17, 2026, with a response deadline of August 17, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The place of performance and physical office details are not specified, indicating the work may be performed remotely or at various approved locations. The contract is accessible through the DIBBS system via a public link, and bidders must ensure alignment with all military compliance requirements and quality performance metrics to be considered for award.

General Info

Small business subcontract for military-quality product testing with zero non-conformances, due August 17, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct Product Verification Testing (PVT) and inspection per military standards to ensure compliance with contractual and quality requirements, including zero non-conformances.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Counterfeit Electronic Parts Detection & Avoidance System ImplementationThe contract seeks the implementation of a comprehensive counterfeit electronic parts prevention and detection system to safeguard the integrity of components used in defense applications. This includes establishing rigorous supplier screening procedures, standardized part authentication protocols, and validated testing methods to identify and isolate suspect components. The contractor will be responsible for developing and maintaining a system that ensures consistent detection of counterfeit electronics throughout the supply chain, with clear processes for documenting, reporting, and escalating suspected nonconforming items. The system must comply with industry best practices and government standards for electronic parts reliability and supply chain security. This is a small business set-aside subcontract under NAICS code 541380, issued by the ASC Commodities Division of the Department of Defense, with proposals due by August 11, 2026. The work is intended to support defense logistics and procurement integrity, requiring the contractor to demonstrate technical capability in electronics verification, supply chain risk management, and reporting mechanisms. Although the place of performance and point of contact details are unspecified, the effort is expected to involve coordination across multiple tiers of suppliers and internal quality assurance teams to ensure end-to-end visibility and accountability. All activities must align with federal acquisition regulations governing small business participation and defense supply chain resilience.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Gold Tube Testing and ValidationThe contract titled Gold Tube Testing and Validation requires comprehensive environmental, electrical, and life-cycle testing of high-reliability gold tubes to ensure their performance and compliance with military specifications. The work is focused on validating the durability and functionality of these components under extreme conditions typical of defense applications, with testing protocols aligned to stringent federal standards. All testing must be conducted with precision to confirm suitability for mission-critical systems deployed in high-stakes operational environments. The contract is classified as a subcontract under NAICS code 541380 and is administered by NSWC Crane within the Department of Defense. Performance must take place at or near Crane, Indiana, with a zip code of 47522. Interested parties must submit responses no later than August 5, 2026, at 4:00 PM Eastern Time, following a posting date of July 29, 2026. The solicitation does not specify a set-aside classification or point of contact, and all details including submissions and compliance must be verified through the official SAM.gov link provided.

POSTED

about 24 hours ago

DEADLINE

System Calibration and Compliance ValidationThe contract pertains to the periodic calibration of sensors and routine water quality testing to ensure ongoing compliance with CLSI standards for laboratory water purity, a critical requirement for maintaining the integrity and accuracy of medical and diagnostic laboratory processes. This work is essential for supporting the operational reliability of equipment and systems within laboratory environments under the Department of Veterans Affairs. The solicitation is classified as a subcontract under NAICS code 541380, which designates it within the category of other scientific and technical consulting services. It was posted on July 29, 2026, with a response deadline of August 3, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contracting office responsible is the 246-NETWORK Contracting Office 6 (36C246), operating under the Department of Veterans Affairs, though specific performance location and point of contact details are not provided in the available data. All submissions must align with the technical specifications for water purity validation in clinical laboratory settings.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 24 hours ago

DEADLINE

Thermal Protection System (TPS) Fiber Trade Studies and Material EvaluationThe contract involves conducting comprehensive trade studies to evaluate fiber diameter, carbon-to-phenolic composition, and performance characteristics of materials intended for NASA’s Thermal Protection System applications. These studies require detailed analysis of material behavior under extreme thermal and mechanical conditions to identify optimal formulations and configurations that enhance performance, durability, and mass efficiency for spacecraft re-entry environments. The work includes collecting, interpreting, and correlating experimental data to support decision-making in material selection and system design, with a strong emphasis on technical documentation and reporting to communicate findings clearly to NASA engineering teams. The subcontract is open for response until August 1, 2026, and falls under NAICS code 541380, indicating it is for other scientific and technical consulting services. It is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and while the place of performance is unspecified, the work is expected to support critical TPS development efforts for future space missions. The solicitation, posted on July 29, 2026, targets specialized contractors with expertise in advanced composite materials and aerospace thermal protection systems, requiring precision in testing methodologies and analytical rigor to meet NASA’s high-performance standards.

NASA Shared Services Center

POSTED

about 24 hours ago

DEADLINE

Validation & Testing Support ServicesThe contract seeks support services for the validation and testing of a lateral flow device, requiring comprehensive test planning, execution, and documentation to ensure accuracy and compliance. This work may involve coordination with third-party laboratories for independent testing or the analysis of resulting data to validate performance metrics. The effort is aligned with public health objectives and is critical for confirming the device’s reliability under real-world conditions. The contract is classified as a subcontract under NAICS code 541380, issued by the CDC Office of Acquisition Services under the Department of Health and Human Services, with performance required in Atlanta, Georgia, 30341. Interested parties must respond by August 18, 2026, with no set-aside provisions specified. The solicitation is open for bids through the SAM.gov platform, and all deliverables must meet the technical and procedural standards necessary for regulatory and operational use in public health contexts.

CDC Office Of Acquisition Services

POSTED

about 24 hours ago

DEADLINE

Gas-Free and Confined Space Certification ServicesThe contract requires the provision of gas-free certification services for tanks, voids, and enclosed spaces to verify that atmospheric conditions are safe for maintenance activities or hot work. This service is critical for ensuring worker safety by eliminating the risk of fire, explosion, or toxic exposure before any entry or operation begins. The certification process must meet established safety standards and involve thorough testing and documentation to confirm the absence of hazardous gases, vapors, or oxygen-deficient environments. The solicitation is issued as a subcontract under the NAICS code 541380, targeting specialized environmental and safety consulting services, and is managed by the Naval Supply Systems Command Fleet Logistics Center Yokosuka under the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 13, 2026, at 2:00 AM. Performance will occur at facilities associated with the Yokosuka command, though the exact location is not specified. Interested parties must submit proposals by the stated deadline to be considered for award.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 24 hours ago

DEADLINE

Calibration Documentation and Reporting ServicesThe contract seeks services for the generation of compliant calibration certificates that include NIST traceability, documented measurement uncertainties, and detailed before and after test data to ensure accuracy and regulatory adherence. The work requires precise documentation standards consistent with federal metrology requirements and is intended to support calibration activities for critical equipment used by the Pearl Harbor Naval Shipyard. All deliverables must meet rigorous technical and compliance benchmarks to guarantee the integrity of measurement processes within Department of Defense operations. This is a subcontract opportunity under NAICS code 541380, posted on July 29, 2026, with a response deadline of August 4, 2026. Performance is expected to occur at JBPHH, with no specific set-aside designation applied. While no point of contact is listed, interested parties must submit proposals through the specified SAM.gov portal before the deadline. The scope emphasizes technical accuracy, traceability, and comprehensive reporting rather than physical calibration services, focusing solely on the documentation and reporting output required to validate calibration outcomes for government assets.

Pearl Harbor Naval Shipyard IMF

POSTED

about 24 hours ago

DEADLINE

DNA Sample Preparation and Quality ControlThe contract pertains to the extraction, quantification, and quality control of mitochondrial DNA from provided biological samples, with the primary objective of ensuring sample integrity prior to downstream genotyping procedures. All work must adhere to standardized protocols that guarantee the reliability and reproducibility of mitochondrial DNA yields, including rigorous assessment of purity, concentration, and structural integrity to meet genotyping requirements. The services are classified under NAICS code 541380 and are structured as a subcontract under the National Institutes of Health, operating through the Department of Health and Human Services. The solicitation was posted on July 29, 2026, with a response deadline of August 7, 2026, at 6:00 PM, and no specific set-aside provisions or location details are provided, indicating flexibility in performance location. The technical scope demands precision in laboratory practices, and success hinges on documented compliance with quality benchmarks to support subsequent genetic analysis.

National Institutes Of Health Olao

POSTED

about 24 hours ago

DEADLINE

High-Throughput Mitochondrial DNA GenotypingThe contract involves the high-throughput genotyping of 1,500 biological samples using the QuantStudio™ Real-Time PCR System and custom TaqMan assays to identify maternal haplogroups through mitochondrial DNA analysis. The work requires precise, scalable laboratory execution with validated protocols to ensure accurate haplogroup assignment across all samples. All procedures must adhere to quality standards suitable for genetic research applications and deliver results in a timely, reproducible manner. This is a subcontract under the National Institutes of Health, part of the Department of Health and Human Services, with a NAICS code of 541380 indicating it falls under scientific research and development services. The solicitation was posted on July 29, 2026, and responses are due by August 7, 2026, at 6:00 PM. The place of performance and point of contact details are not specified, and no set-aside status is designated. Interested parties must review the full terms through the provided SAM.gov link prior to submission.

National Institutes Of Health Olao

POSTED

about 24 hours ago

DEADLINE

Certified Material Test Reporting (CMTR) & Traceability ServicesThe contract requires the provision of Certified Material Test Reports (CMTRs) that deliver complete, traceable documentation of material composition and processing history for components used in high-precision applications. This includes generating detailed records that link each batch or lot of material to its raw source, manufacturing steps, heat treatments, and quality controls, ensuring full accountability throughout the supply chain. Third-party testing must be conducted as necessary to verify critical material properties, particularly magnetic permeability and microstructure, with results independently confirmed and integrated into the certified reports to meet stringent compliance standards. This subcontract, issued by Fermilab as a Department of Energy contractor under NAICS code 541380, is focused on technical testing and analytical services essential for materials used in scientific and energy infrastructure projects. The solicitation was posted on July 29, 2026, with responses due by August 26, 2026. Performance is expected to support DOE-related operations, though the precise location of performance is not specified. The requirement demands rigorous adherence to traceability protocols and credible, auditable testing results, positioning the contractor as a critical partner in ensuring material integrity and regulatory compliance for mission-critical components.

Fermilab - DOE Contractor

POSTED

about 24 hours ago

DEADLINE

DPW | AN Pavement Condition Assessment Services

Solicitation # SFGOV-0000011883

San Francisco Public Works is seeking to award up to four master agreements to pre-qualified consultant or joint venture firms for as-needed pavement condition assessment services over a five-year term, with each contract valued at no more than $400,000. Work will be performed through individual Contract Service Orders issued during the contract period, and proposals must be submitted via the SF City Partner Website Supplier Portal by September 9, 2026, at 2:00 p.m. Pacific Time. No pre-proposal conference will be held, and all questions must be emailed to the Contract Administrator by August 12, 2026. Contractors must be registered with the California Department of Industrial Relations if their billing classifications are subject to prevailing wages, and late submissions will not be accepted. The Local Business Enterprise subcontracting requirement has been waived. All RFQ documents, including addenda, are available for free download through the SF City Partner Website, and the primary point of contact for inquiries is Belle Macaranas.

San Francisco Public Works

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

PARTS KIT, SEAL REPL

Solicitation # SPE4A7-26-T-599Y

The contract pertains to a parts kit for mechanical seal replacement, identified by the part number 110-004-19-0150 and NSN 1560-01-524-3353, with a single unit requirement. It is issued under solicitation SPE4A7-26-T-599Y by the Department of Defense through the ASC Supplier Oper AE and AF Division and is targeted for delivery to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City. The delivery deadline is 20 days after award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization standards under DLA packaging requirements. The item is designated as a critical application, with qualified suppliers including Atlantic India Rubber Co Inc, Kirkhill Inc, Rubbercraft Corporation of California, and Bell Textron Inc. Quality and procurement requirements are governed by tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers, incorporating technical and quality criteria from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are classified with specific verification levels or AQLs. Configuration changes require a formal engineering change proposal or variance request, and government identification must be removed from non-accepted supplies. Hazardous materials packaging must adhere to IP025 guidelines. The contract includes a required delivery date of July 31, 2026, and specifies a single unit at unit price of $1.00. Transportation is subject to DLA procedures, and the solicitation is open for response until August 6, 2026, with the primary point of contact being Jack Bolan at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

THERMOSTAT, FLOW CONTRO

Solicitation # SPE4A7-26-T-599X

The contract specifies the procurement of a Thermostat, Flow Control with NSN 6685-01-368-0419 and part numbers 247-7133 and 2ET322, quantity of 366 units, to be delivered FOB origin within 171 days, with a required ship date of January 25, 2027, and original delivery date of January 18, 2027. The item is designated as a critical application and must comply with strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging and palletization follow DLA’s procurement guidelines, and the unit is delivered to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling rules defined by MIL-STD-1916 or ASQ H1331, and unspecified attributes treated as major. Configuration change management and deviation requests are governed under RQ002, while documentation for source approval must meet RC001 standards. Measurement equipment, technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract is a total small business set-aside under NAICS code 334519, issued as a solicitation on July 29, 2026, with responses due August 6, 2026. Unit of issue is each (EA), with no quantity variance allowed, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i).

Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

SPLICE, CONDUCTOR

Solicitation # SPE4A7-26-T-599S

This contract issued by the Defense Logistics Agency under solicitation SPE4A7-26-T-599S specifies the procurement of 25 units of conductor splice components, identified by NSN 5940-00-961-0479, from approved vendors including Ideal Industries Inc, Grove U.S. LLC, and United Equipment Accessories Inc, each with their respective CAGE codes and part numbers. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951 for packaging. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Physical marking and identification of items must follow RQ017 requirements, ensuring clear labeling per contract specifications. Delivery is required within five days of contract award, FOB origin, with zero variance allowed in quantity. Items must be packaged in accordance with MIL-STD-129 and DLA Packaging Requirements, palletized per RP001, and labeled with the specified Unit of Issue and Quantity per Unit Pack. Shipment must be sent via the fastest traceable method excluding parcel post to the Sierra Army Depot in Herlong, California, with identical freight and mark-for addresses. The required delivery date is July 24, 2026, and all items must be marked with designated government identifiers including the TCN and DIC codes. Inspection and acceptance occur at the destination, and only DLA authorized units of issue apply. The contract is managed under NAICS code 335931, with primary contact Jesse Saul at DLA, and is exclusively for federal government use.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

SELECTOR SET, HYDRAU

Solicitation # SPE4A7-26-T-600K

The contract pertains to the procurement of a Hydraulic Selector Set with part number HP891501T, supplied by TACTAIR FLUID CONTROLS INC, CAGE 70236, identified by NSN 1630-00-939-8534. The item is classified as a Commercial Off the Shelf (COTS) product and is designated as a Critical Application Item requiring Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Delivery is mandated within 39 days of contract award, with FOB Origin terms and mandatory delivery to DLA Distribution Cherry Point in North Carolina. The required quantity is seven units, with no variance allowed in shipment quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Documentation requirements include compliance with DLA’s Master List of Technical and Quality Requirements, and the removal of government identification from non-accepted supplies. The solicitation number is SPE4A7-26-T-600K, issued with a response deadline of August 6, 2026, and the original required delivery date is January 28, 2027, though the need-by date is set for September 15, 2026. Unit price is $7.00 per unit, totaling $49.00, with procurement governed by Defense Federal Acquisition Regulation Supplement (DFARS) provisions and DoD unit of issue standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

MOUNT, RESILIENT, WEA

Solicitation # SPE4A7-26-T-600E

The contract pertains to the procurement of a resilient weapon mount, identified by part number 26001578-101 and NSN 5342017278571, with a total quantity of ten units to be delivered under solicitation SPE4A7-26-T-600E. Delivery is required within 114 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with stringent quality standards including MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes held to a zero-defect acceptance criterion unless otherwise stipulated. The product must adhere to DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, using prescribed methods for protection, wrapping, and containment, and palletization must meet DLA guidelines. The item is classified as a critical application component under The Boeing Company’s specifications and is subject to cybersecurity compliance under CMMC Level 2 self-assessment, along with documentation mandates for source approval and removal of government identification from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping details governed by DLAD procedural notes C19 and C20. The contract was posted on July 29, 2026, with responses due by August 6, 2026, and the original required delivery date is set for May 5, 2027, while the needed ship date is November 29, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the procurement falls under NAICS code 332510, managed by the Department of Defense’s ASC Supplier Operations division.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

TERMINAL, QUICK DISCONN

Solicitation # SPE4A7-26-T-599U

The contract is for a single unit of a terminal, quick disconnect, identified by NSN 5940-01-602-4565 and part number 12077412-L, under solicitation SPE4A7-26-T-599U. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but must fully comply with all DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination. The destination for delivery and marking is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, with shipping required via the fastest traceable means—parcel post is prohibited. The government use identifier, project code, and point of contact details are included for administrative tracking, and the required delivery date is July 24, 2026. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, and the unit of issue is the individual unit (EA). The buyer is APTIV SERVICES 3 (US), LLC, and the purchasing request number is 7017622935. All documentation must align with DLA procedures, and the supplier must ensure correct marking, packaging, and compliance with federal procurement standards.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

PARTS KIT, FASTENER

Solicitation # SPE4A7-26-Q-0923

The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

ACCUMULATOR, HYDRAUL

Solicitation # SPE4A7-26-Q-0917

The contract pertains to the procurement of four hydraulic accumulators with NSN 1650-01-558-4800 under solicitation SPE4A7-26-Q-0917, with a response deadline of August 10, 2026, and a delivery requirement of 200 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons, including foreign nationals within the United States, requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and received formal approval from the DLA controlling authority. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The contracting activity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen as the primary point of contact.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 19 hours ago

DEADLINE

PANEL ASSEMBLY, ELEV

Solicitation # SPE4A7-26-Q-0883

The contract specifies the procurement of three PANEL ASSEMBLY, ELEV units under solicitation SPE4A7-26-Q-0883, with a delivery timeline of 210 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. The contract incorporates multiple DLA-specific requirements including packaging standards, tailored quality controls, configuration change management, inspection at origin, removal of government identification from non-accepted items, and export control of technical data subject to ITAR or EAR regulations. Disclosure of controlled technical data to foreign persons, regardless of location or citizenship, is strictly prohibited without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The item is identified by NSN 1560-00-766-6241, and contract administration is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed designated as the primary point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A7-26-T-599V

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, identified by NSN 5970-00-612-8492 and sold in units of 1 RO equaling 108 feet. The item is classified as a commercial item and must be manufactured in compliance with qualified products list QPL-19166-30 revision 30. Strict packaging requirements under MIL-STD-2073-1E and MIL-STD-129 apply, including special marking code 33 for Type II shelf life identification. The tape has a maximum shelf life of five years when stored between 50°F and 80°F with humidity below 75%, but compliance with RS001 mandates a non-extendable 12-month shelf life from manufacture, regardless of storage conditions. The material is designated as hazardous with HMIC code P, necessitating submission of a complete Safety Data Sheet package including warning labels and the required transmittal form to dscrchempol@dla.mil. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted in the sample unless otherwise stated, and verification levels for attributes are prescribed. All deliveries must be shipped via traceable freight means, not parcel post, to specified military addresses in Virginia Beach, Oak Harbor, and Norfolk. The contract includes four separate CLINs totaling six ROs with delivery due between June and July 2026, all subject to origin inspection and acceptance with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-599Z

This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600D

This contract specifies the procurement of a LATCH, VALVE with NSN 5342-01-193-7756 and part number S4127, for a quantity of 13 units, delivered FOB origin within 149 days of contract award, with no variance allowed in quantity. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific preservation methods, packaging materials, and unit container types. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or weapons systems, and even then, portable devices must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or a comparable zero-defect sampling plan, with verification levels and AQLs assigned to critical, major, and minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under inspection at the receiving warehouse, and non-conforming items must have government identification removed prior to return. The item must be palletized as directed by DLA packaging requirements, and shipping is directed to the DLA Distribution San Joaquin facility in Tracy, CA. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation issue date, and all compliance obligations are binding under the terms of SPE4A7-26-T-600D.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE