Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Production Lot Destructive Testing for Shipboard Nuts

Active

Federal

Response Deadline11/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFF34.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT,PLAIN,ROUND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 08:30:00 PM UTCin 17 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs destructive testing on production lots for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. Conducts material integrity validation for Special Emphasis Level I hardware using tensile, hardness, or shear testing per the TDP. Requires ISO/IEC 17025 laboratory accreditation. Delivers formal test reports and certification of lot acceptance or rejection.

Similar Contracts

Same NAICS industry code

Third-Party Quality Inspection and SamplingThis subcontract for Third-Party Quality Inspection and Sampling supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent sampling and inspection for prime contractors specifically for the 4820-01-223-8097 valve. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 standards to verify critical, major, and minor attributes using zero-based sampling plans, precision measurement, and pressure testing equipment. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in Jacksonville, Florida. The contractor is responsible for delivering comprehensive inspection reports and certifications of conformance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

Third-Party Aerospace Quality Testing and CertificationThis subcontract for Third-Party Aerospace Quality Testing and Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent quality testing and verification, utilizing sampling methods per MIL-STD-1916 or ASQ H1331 and executing tests defined in QAP I3873 QAP-020. All work must be conducted using calibrated M&TE per RT001, with final deliverables consisting of detailed test reports and certifications of compliance. To be eligible, the contractor must hold ISO/IEC 17025 accreditation and maintain CMMC Level 2 certification for the secure handling of technical data. This opportunity falls under NAICS code 541380 and is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Third-Party Testing and Certification for Critical Application SeatsThis subcontract involves providing independent testing and validation services for critical application seats supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the performance of First Article Testing and production lot sampling in strict accordance with MIL-STD-1916 or ASQ H1331 standards. To ensure rigorous safety compliance, the contractor must utilize stress analysis and load testing rigs, ultimately delivering certified inspection certificates and detailed test reports. The opportunity is categorized under NAICS code 541380 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 23, 2026. This effort focuses on ensuring that critical components meet all necessary safety and performance specifications through third-party certification.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation is seeking quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. Key deliverables include a sampling plan, waste shipment records, disposal manifests, and a final project completion report. This opportunity is open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities, under NAICS code 541380. Bidders must submit a completed bid sheet, a supplier packet containing a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and incorporates various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information. Invoicing is to be submitted on a weekly or bi-weekly basis.

Joliet Job Corps

POSTED

about 10 hours ago

DEADLINE

SCDOT Certified Level 1 InspectionThis subcontract opportunity is for the provision of independent third-party quality assurance and inspection services for prime contractors working on Beaufort County Engineering road projects. The selected provider will be responsible for monitoring asphalt placement, verifying temperatures, and managing load tickets in strict accordance with SCDOT procedures. To ensure compliance and technical accuracy, the contractor must employ an SCDOT Certified Level 1 Inspector who will deliver weekly inspection reports and certified quality documentation. The solicitation was posted on October 16, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 541380, this project is managed by the Engineering department of South Carolina. Interested parties can find further details and submission guidelines through the official procurement portal.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Geotechnical Vibration MonitoringThis subcontract for Geotechnical Vibration Monitoring involves providing specialized monitoring services for prime contractors working on roadway projects within the City of New Smyrna Beach. The primary objective is to monitor existing structures during the construction process to maintain stability and ensure strict compliance with established geotechnical standards. The selected provider will be responsible for delivering detailed vibration monitoring reports to document these findings. The opportunity is categorized under NAICS code 541380 and is managed by the Purchasing agency for the state of Florida. Interested parties should note that the solicitation was posted on October 16, 2026, with a response deadline set for January 13, 2027.

POSTED

about 14 hours ago

DEADLINE

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Specialized Non-Destructive Testing (NDT) for Critical Shipboard ComponentsThis subcontract involves providing specialized Non-Destructive Testing (NDT) services for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support. The primary objective is to ensure the structural integrity of new or refurbished ball kit components through the execution of X-ray, Ultrasonic, Magnetic Particle, and Dye Penetrant procedures in accordance with TDP O08. To qualify, the contractor must utilize NAS 410 certified technicians and obtain DCMA QAR approval for all NDT procedures. Key deliverables for this engagement include detailed NDT Inspection Reports and a Certification of Compliance. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month

NDT Inspection and Material Traceability CertificationThis subcontract for NDT Inspection and Material Traceability Certification supports prime contractors on NAVSUP Weapon Systems Support projects within the Department of Defense. The selected provider will perform comprehensive non-destructive testing to verify material integrity, utilizing ultrasonic equipment, magnetic particle testing, and dye penetrant methods to conduct 100 percent inspections of material verification data. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and adhere to ANSI/NCSL Z540.3 standards. Key deliverables include NDT inspection reports, Objective Quality Evidence, and material certification test reports. The response deadline for this opportunity is November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Acceptance Testing and Certification for Electric StartersThis subcontract involves providing final acceptance testing and quality certification for electric engine starters supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for conducting functional testing using Special Test Equipment in accordance with approved overhaul manuals to verify operational reliability and generate necessary acceptance test data. The project requires the use of certified quality assurance personnel and strict adherence to calibration standards. Key deliverables include the submission of certified Acceptance Test Reports and RFI certifications. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

about 14 hours ago

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the Navsup Weapon Systems Support Mech agency. The scope of work involves the preservation, packaging, and marking of finished subassemblies for prime contractors. All deliverables must be shipping-ready containers that strictly adhere to Navy standards, specifically utilizing MIL-SPEC materials and industrial marking equipment. Technical execution requires strict compliance with MIL-STD-2073 for packaging and MIL-STD-129 for marking, with a specific requirement for LEVEL 1 red markings. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Certified Raw Material SupplyThis subcontract, titled Certified Raw Material Supply, involves the procurement of high-grade alloys and specialized metals to support prime contractors working on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work requires that all materials strictly adhere to TDP Version 004 specifications, particularly for Critical Safety Items. To ensure quality and compliance, the supplier must provide comprehensive mill certifications and full traceability documentation from approved sources. All raw materials delivered under this agreement must be accompanied by certified mill test reports. The opportunity was posted on October 16, 2026, with a response deadline of November 13, 2026, falling under NAICS code 423510.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS