This Government Contract opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Production Lot Test (PLT) Services

Closed

Federal

Submission Closed09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

Chemical Fume Hood and Biosafety Cabinet CertificationThis subcontract involves the annual certification and calibration of laboratory airflow containment systems for prime contractors working on Mississippi Department of Public Safety projects. The scope of work includes the testing and certification of 43 chemical fume hoods and 5 biosafety cabinets, utilizing specialized airflow anemometers and HEPA filter testing equipment. The selected provider is required to deliver formal certification reports and apply calibration stickers to all tested units. To qualify for this engagement, the contractor must hold ISO/IEC 17025 accreditation specifically covering field calibrations and airflow containment. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is soliciting quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Warehouse, Warehouse Storage Area, and Gymnasium. Specifically, the project estimates the removal of approximately 3,600 square feet of ACM in the warehouse areas and 600 square feet in the gymnasium. All work must be performed by licensed professionals using accredited laboratories and must comply with federal, State of Illinois, OSHA, and EPA regulations. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested offerors must submit a bid sheet, a completed supplier packet including a W-9 and self-certification, proof of insurance, and three professional references by October 21, 2026. Award will be based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and requires strict adherence to information security and waste disposal documentation, including the provision of waste shipment records and final project completion reports.

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Ultrasonic InspectionThis subcontract involves providing specialized non-destructive testing and ultrasonic inspection services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes performing dye penetrant inspections on valve body weld ends and ultrasonic inspections on starting materials, adhering to specific technical standards including T9074-AS-GIB-010/271, S9074-AR-GIB-010A/278, and MIL-STD-2132. A critical requirement for this contract is that the service provider must be an approved source for Critical Safety Item testing. The successful contractor is responsible for delivering certified NDT and Ultrasonic Inspection Reports. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Steam Jacketed Kettle Hydrostatic TestingThis subcontract involves performing hydrostatic pressure testing for prime contractors on vessel repair projects managed by the Navsup Flc Sigonella Naples Office. The scope of work requires the use of hydrostatic pumps, pressure gauges, and testing manifolds to pressurize steam jacketed kettles with water to identify leaks and structural deformation. All activities must be conducted in strict accordance with Reference 65111-3-009 Rev A/1 and FAR 52.246-1. The selected provider is responsible for delivering a formal hydrostatic test report and a certification confirming the integrity of the kettles. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Flight Critical Component NDT InspectionThe Flight Critical Component NDT Inspection subcontract involves providing independent non-destructive testing for prime contractors on DLA Aviation projects. The primary objective is to verify the structural integrity of regulating valves through a 100% inspection of critical characteristics. Approved testing methodologies include ultrasonic, radiographic, or liquid penetrant methods to ensure the highest safety and quality standards for flight critical components. To qualify, service providers must maintain ISO 9001 certification and employ technicians certified at NDT Level II or III. The successful contractor is responsible for delivering both certified NDT inspection reports and the certified components. This opportunity is managed by the Department of Defense through the Pa DLA Aviation At Philadelphia office under NAICS code 541380, with a response deadline of October 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing (NDT)This subcontract for Navsup Weapon Systems Support Mech involves performing critical safety testing for prime contractors. The scope of work includes conducting hydrostatic testing according to drawing G985455 and non-destructive testing on weldments. All testing must be performed using calibrated gauges that comply with MIL-STD-45662 or ISO10012-1 standards. To be eligible, the provider must hold ISO/IEC 17025 accreditation. The contract requires the delivery of test certification reports in accordance with CDRL DI-MISC-S08678. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NETA Certified Electrical Power Distribution System TestingThis SDVOSB sole source subcontract, managed by the Department of Veterans Affairs Network Contract Office 15, involves NETA Certified Electrical Power Distribution System Testing for medical center projects in Marion. The scope of work requires the maintenance, inspection, adjustment, and tri-annual electrical testing of critical infrastructure, including 325 electrical panels, 135 transformers, 220 switches, 6 generators, and 25 automatic transfer switches. To ensure compliance and safety, all work must be performed by NETA-certified technicians under the guidance of a Supervising Field Service Engineer. The project must strictly adhere to NETA 2019, NFPA 70E, and VHA Directive 1028 standards, with a requirement for the delivery of comprehensive maintenance and testing reports. The response deadline for this opportunity is November 9, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports prime contractors on DLA Land Warren projects within the Department of Defense. The scope of work involves executing rigorous testing protocols for light-transmitting indicating panels to validate manufacturing processes in accordance with the Technical Data Package and FAR 52.209-3. Using precision measurement equipment, the contractor must verify that all hardware meets strict specifications and deliver a government-approved First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in Warren. To ensure the highest level of quality and consistency, the contractor is required to adhere to ISO 9001:2015 quality standards. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026.

POSTED

DEADLINE

Production Lot Testing and Inspection ServicesThis subcontract for Production Lot Testing and Inspection Services supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform technical testing and inspections for prime contractors to validate production lots, ensuring all work adheres to technical specifications and the 651AS drawing series. Key responsibilities include coordinating government-witnessed testing and maintaining strict compliance with DCMA QAR requirements and DD Form 1423. The primary deliverable for this engagement is an approved Production Lot Test/Inspection Report. Classified under NAICS code 541380, the opportunity was posted on October 9, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Oxygen Clean Precision CleaningThis subcontract opportunity with the Department of Defense, specifically for Pa DLA Aviation At Philadelphia, involves the precision cleaning and testing of components for prime contractors. The scope of work focuses on cleaning components for shipboard oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. All work must be performed in accordance with MIL-STD-1330 standards, utilizing certified clean-room facilities and specialized contamination testing equipment to deliver certified Oxygen Clean components. The project falls under NAICS code 541380 and requires the contractor to hold a MIL-STD-1330 certification. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Water Quality Testing & VerificationThis subcontract opportunity involves providing professional water quality testing services for prime contractors working on U.S. Army Research Laboratory facility projects at Aberdeen Proving Ground. The selected provider will be responsible for collecting water samples following installation and testing them for contaminants to ensure that the output meets or exceeds the original equipment manufacturer water quality and performance specifications. The project requires the use of a certified laboratory to conduct the analysis and deliver formal water quality test results and verification reports. This requirement falls under NAICS code 541380 and is associated with the Department of Defense, specifically the W6QK Acc-Apg Adelphi agency.

POSTED

DEADLINE

Potable Water HPC Laboratory Analysis and ReportingThis subcontract for Potable Water HPC Laboratory Analysis and Reporting involves performing Heterotrophic Plate Count testing for prime contractors on Department of Veterans Affairs facility projects in Biloxi, Mississippi. The selected provider must conduct analysis according to Standard Methods 9215, ensuring samples are incubated at 35C for approximately 48 hours within 8 to 24 hours of collection, while managing custody in accordance with SM 9020/9060. All results must be delivered via electronic laboratory analysis reports. To qualify, the contractor must hold ISO/IEC 17025 accreditation and NELAP recognition, along with certification from the Florida DOH/NELAP or MSDH. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 541380. The solicitation was posted on October 9, 2026, with a response deadline of October 22, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

This subcontract for Production Lot Test services supports the Department of Defense through DLA DIST San Joaquin. The contractor is responsible for performing Production Lot Testing for prime contractors on battery procurement projects, specifically focusing on NSN/Material S00000601. The scope of work involves executing testing protocols using environmental chambers and voltage/capacity testers to verify that batch technical specifications are met, culminating in the delivery of a formal test report and certification. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties must respond by September 14, 2026, following the posting date of September 2, 2026.

General Info

Production Lot Testing for DoD battery procurement in Tracy, California, due September 14, 2026.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-26-T-5098.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BATTERY ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 2

subcontract

Response DeadlineSep 14

Deadline has passed

Submission Closed

09/14/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Performs Production Lot Testing (PLT) for prime contractors on Defense Logistics Agency (DLA) battery procurement projects. Executes testing protocols using voltage/capacity testers and environmental chambers to verify batch technical specifications for NSN/Material S00000601. Delivers a test report and certification confirming the lot meets PLT requirements.