Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Production Lot Test (PLT) Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 9 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 10 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 14 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Material Testing Services
CITY OF WACO

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # RFP2026-08AM
California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.
California State University, Chico

POSTED

about 18 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
International
Water Treatment & Chemical Dosing SystemsThis subcontract for Water Treatment and Chemical Dosing Systems involves providing specialized maintenance for automated chemical dosing systems on facility projects for the City and County of Swansea. The scope of work includes calibrating dosing pumps, testing and balancing pool water chemistry, and repairing dosing controllers and sensors. A critical component of the contract is ensuring strict compliance with health and safety standards regarding the handling of hazardous chemicals. The selected provider is responsible for delivering fully calibrated dosing systems and detailed water quality compliance reports. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The project falls under NAICS code 541380 and is designed to support prime contractors operating within the City and County of Swansea.
City & County of Swansea

POSTED

about 19 hours ago

DEADLINE

in 26 days
NAICS: 541380
New
International
Groundwater Sampling and Compliance Testing
Environment, Conservation and Parks

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Asphalt and Concrete Materials TestingThis subcontract for Asphalt and Concrete Materials Testing involves providing specialized laboratory testing and calibration services for prime contractors working on Virginia Department of Transportation projects in Prince William County. The scope of work includes the preparation of job-mix formulas for asphalt and Crushed Hydraulic Cement Concrete, aggregate property testing, and ignition furnace calibration in accordance with VTM 102. To be eligible, the contractor must operate a VDOT-approved testing laboratory and be capable of delivering certified test results and approved job-mix formulas. The solicitation was posted on October 27, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.
Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

This subcontract for Production Lot Test Services supports the Department of Defense ASC Commodities Division by providing specialized quality assurance and production lot testing for DLA Aviation supply contracts. The selected provider will conduct testing on five random samples chosen by the Quality Assurance Representative, utilizing specialized electrical testing facilities and coordinating sample shipments to the Redstone Technical Test Center in Alabama. The final deliverables include comprehensive test reports and certifications of compliance. The opportunity is a total small business set-aside under NAICS code 541380, with the primary place of performance located in Texarkana, Texas. Interested parties must respond by September 30, 2026, to the solicitation posted on September 22, 2026.

General Info

Production lot testing for DoD aviation supplies in Texarkana, Texas, due September 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TEXARKANA, TX, 75507-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE4A6-26-T-35GG.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, SPECIAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs specialized quality assurance and production lot testing for prime contractors on DLA Aviation supply contracts. Conducts Production Lot Tests (PLT) on five random samples selected by the Quality Assurance Representative. Coordinates sample shipment and testing at the Redstone Technical Test Center in Alabama. Utilizes specialized electrical testing facilities. Delivers test reports and certification of compliance.

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24UD
This contract is for the procurement of 397 machine screws under NSN 5305-01-651-3531. The items are designated as critical application items and must adhere to specific technical data packages and quality requirements, including MIL-STD-130N for identification marking and ASTM D3951 for packaging. Delivery is required within 144 days, with a final need date of January 31, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is managed through destination inspection and acceptance. The supplier must provide a Certificate of Quality Compliance with every shipment and follow strict sampling methods according to MIL-STD-1916 or ASQ H1331. The contract incorporates various DLA master list technical and quality requirements, including specific guidelines for packaging, the removal of government identification from non-accepted supplies, and the submission of required Contract Data Requirements Lists.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-34GP
Solicitation SPE4A6-26-T-34GP is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 22 hexagon head cap screws, identified by NSN 5305015203960 and part number 119A2M260. The contract is established under the First Destination Transportation program with FOB Origin terms. The required ship date is March 14, 2027, with an original required delivery date of July 11, 2027. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur. The procurement is subject to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the use of mercury compounds in packaging is prohibited, and additive manufacturing is not permitted unless specifically authorized. All quotes must be submitted via the DIBBS portal, and payment processing is required through Wide Area WorkFlow.
Nonferrous Forging

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-22NX
The Defense Logistics Agency within the Department of Defense has issued a solicitation for one Cable Assembly, Radi, identified by NSN/Part Number 5995-01-529-7383. This requirement is tracked under purchase request 7017996398 and solicitation number SPE4A6-26-T-22NX. The solicitation was posted on August 25, 2026, and the deadline for responses is September 2, 2026. This is a federal procurement action managed by the Department of Defense to acquire a specific cable assembly component.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, ROUND
Solicitation # SPE4A6-26-T-18PK
This solicitation, number SPE4A6-26-T-18PK, is issued by the Department of Defense ASC Commodities Division for the procurement of plain, round nuts (NSN 5310-21-878-7128). The requirement consists of two contract line item numbers (CLINs) totaling 67 units, with an estimated total value of $4,229.00. The items are identified as commercial of a type and are intended for critical applications, specifically associated with General Dynamics Land Systems-Canada and General Dynamics European Land Systems. Delivery is required within 171 days, with a need ship date of February 12, 2027, and an original required delivery date of May 3, 2027. The contract is structured with FOB Origin terms, and the primary delivery locations are DLA Distribution Barstow, CA, and DLA Distribution New Cumberland, PA. Strict adherence to military standards is required for packaging, marking, and quality assurance. Packaging must comply with MIL-STD-2073-1E and DLA requirements (RP001), while shipment marking must follow MIL-STD-129. Item identification and traceability must meet MIL-STD-130N standards. Quality inspection and acceptance will occur at the destination, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331, where acceptance requires zero non-conformances. The contract incorporates various FAR and DFARS clauses, including provisions for equal opportunity, combating trafficking in persons, and hazardous material identification. Interested offerors must submit electronic quotes via the DLA Internet Bid Board System (DIBBS) by the deadline of August 24, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
HOLDER, RADIOGRAPHIC
Solicitation # SPE4A6-26-T-19U5
This contract is for the procurement of 10 radiographic film exposure holders, identified as commercial off the shelf items under NSN 6635007315683. The requirement specifies compatible part numbers from General Electric Co Medical and HD Aero Support, Inc. Delivery is required within 20 days, with FOB origin for delivery, inspection, and acceptance. The items are to be shipped to the ROKAF LC Consolidated Supply Depot in Busan, South Korea, by the required delivery date of March 26, 2026. The agreement incorporates specific DLA technical and quality requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Item Unique Identification is not required for this order, and the material has no shelf life restrictions.
Other Measuring and Controlling Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-08NV
The contract specifies the procurement of 318 machine bolts with NSN 5306014293013 under solicitation SPE4A6-26-T-08NV, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 171 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. Inspection and acceptance both occur at the destination facility located at 2083 Normandy Drive, New Cumberland, PA, with packaging mandated to comply with MIL-STD-2073-1E and marking requirements aligned with MIL-STD-129. The items must be palletized per DLA packaging guidelines and shipped to the designated delivery point without special marking. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The unit of issue is each, at a unit price of $318.00, resulting in a total contract value of $101,124.00. The required ship date is January 17, 2027, with an original delivery deadline of January 10, 2027. Transportation and shipping logistics follow DLAD Proc Notes C19 and C20, and the point of contact for inquiries is Sommer Yates, reachable via phone and email provided.
Nonferrous Forging

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-31KV
Solicitation SPE4A6-26-T-31KV is a fixed-price procurement issued by the Defense Logistics Agency for six radio frequency cable assemblies, identified by NSN 5995016063455 and part number AE13013-412-143. The contract requires delivery within 170 days, with shipping terms set as FOB Origin and delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination, with quality assurance governed by MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. The procurement incorporates stringent technical and regulatory requirements, including CMMC Level 2 self-assessment, safeguarding of covered defense information, and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Compliance with the Buy American Act, the Berry Amendment, and DFARS regulations regarding the prohibition of covered defense telecommunications equipment is mandatory. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The acquisition falls under NAICS code 334419 and requires offerors to certify their socioeconomic status and size standards.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A6-26-T-09HA
The contract specifies the procurement of 10 thrust washers with NSN 3120-01-272-6511 under solicitation SPE4A6-26-T-09HA, with a delivery requirement of 169 days after award. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated. Attributes classified as critical, major, or minor must adhere to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may inform sample size but not acceptance criteria. Documentation for source approval must comply with RC001, and all technical and quality requirements are sourced from the DLA Master List, with revisions tied to solicitation or award dates as applicable. Packaging must meet DLA standards, inspection occurs at origin, and government identification must be removed from non-accepted items. Mercury and mercury-containing compounds are strictly prohibited from direct contact with supplied hardware except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and have a secondary containment per NAVSEA 5100-003D. Measuring and test equipment must be calibrated and verified. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. The contract is issued by the Department of Defense, ASC Commodities Division, with performance in New Cumberland, PA, and inquiries directed to Marion Williams.
Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-22NE
The Defense Logistics Agency of the Department of Defense has issued solicitation SPE4A6-26-T-22NE for the procurement of one Cable Assembly, Radi, identified by NSN/Part Number 5995-01-529-6858. This federal requirement is tracked under purchase request 7017996710. The solicitation was posted on August 25, 2026, with a response deadline set for September 2, 2026. Interested parties can access further details and submit responses through the DIBBS portal.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-32UU
Solicitation SPE4A6-26-T-32UU is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 10 units of straight headed pins, identified by NSN 5315-01-571-8805 and part number MS20392-5P39. The items are designated as critical application items and must be delivered to the Anniston Army Depot in Alabama. The required delivery date is June 9, 2026, with a delivery window of five days after award. Shipping must be conducted via the fastest traceable means, and the use of parcel post is strictly prohibited. The terms of delivery, inspection, and acceptance are all set as FOB Origin. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Quality assurance will be managed through sampling methods in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Offerors must submit quotes via the DIBBS portal by September 25, 2026. Notably, the government will not evaluate offers utilizing additive manufacturing processes. Price evaluation preferences are available for certified HUBZone small businesses, and the contract is subject to the Buy American Act and Berry Amendment restrictions.
Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO F
Solicitation # SPE4A6-26-T-37EW
Solicitation SPE4A6-26-T-37EW is a request for quotations issued by the Defense Logistics Agency Aviation for the procurement of four radio frequency cable assemblies, identified by NSN 5995016063755 and part number AE13013-412-147 from Times Microwave Systems, Inc. This critical application item is categorized under NAICS code 334419. The required delivery date is August 8, 2027, with a need ship date of March 14, 2027. Delivery is established as FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including a CMMC Level 2 Self-Assessment and Source Approval Request documentation. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 and RP001, with DLA Master List requirements taking precedence over ASTM D3951. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment.
Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-971Z
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
ABS Material Certification and Endorsement
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 month ago

CLOSED

23 days ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing and Inspection Support
LAND SUPPLY CHAIN

POSTED

about 1 month ago

CLOSED

23 days ago
View Details
NAICS: 541380
Closed
DIBBS
Technical Inspection and Quality Certification
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 month ago

CLOSED

29 days ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Validation and First Article Testing (FAT)
Defense Logistics Agency

POSTED

about 1 month ago

CLOSED

23 days ago
View Details
NAICS: 541380
Closed
DIBBS
Specialized Metallurgical Laboratory Testing
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
Production Lot Test (PLT) Services
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
Ultrasonic Testing for Nickel Alloy Bars
Defense Logistics Agency

POSTED

about 1 month ago

CLOSED

23 days ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Test (FAT) Coordination and Execution
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) and Quality Certification
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
Third-Party Quality Assurance (QA) Inspector
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Test (FAT) and Quality Validation Services
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 month ago

CLOSED

28 days ago
View Details
NAICS: 541380
Closed
DIBBS
Production Lot Testing (PLT) Specialist
ASC COMMODITIES DIVISION

POSTED

about 1 month ago

CLOSED

28 days ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS