Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PRODUCTION LOT TESTING

Active
SPE4A6-26-T-21UTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-26-T-21UT, issued by the ASC Commodities Division of the Department of Defense, seeks the procurement of 124 units of part number 0001S00000062. The contract requires a delivery timeline of 474 days after order and is categorized under NAICS code 335931. Performance is designated to take place in New Cumberland, Pennsylvania. The contractor must adhere to strict Production Lot Testing requirements, including the submission of a PLT report to the Quality Assurance Representative for review. Required shipping documentation includes DD Form 1222, DD Form 250 or iRAPT receiving reports, material and process certifications, and applicable test reports showing actual results against technical data package tolerances. All submissions must be marked according to DI-NDTI-80809B standards.

General Info

DoD seeks 124 units of part 0001S00000062 for delivery in New Cumberland, Pennsylvania.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-21UT.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
LARRY FERGUSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DI-NDTI-80809B and mark the test report, “Production Lot Test Report, Contract Number [contractor insert] and Lot/Item Number [contractor insert].” (b) Present the contractor’s PLT report to the QAR for review. (c) Include the following documentation with all shipments of PLT Reports: DD Form 1222 and DD Form 250/iRAPT receiving report signed by the QAR; a copy of the contract/order; a copy of all applicable test reports showing actual results and tolerances specified in the technical data package; material and process certifications; process operations and inspection method sheets; copies of drawings used to manufacture the PLT sample with proper marking to restrict public disclosure (if desired) and from Government use other than for NSN/Part Number: 0001S00000062 Quantity: 124 EA Purchase Request: 7016471861QTY - See Solicitation Delivery: 474 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A7-26-T-688W
This contract is a solicitation issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of five Bran Wiring Harnesses. The required items are identified by NSN 5995-01-724-9722 and Celltron, Inc. part number C3-839, adhering to TDP Rev A Gen 1 specifications. The delivery is set for FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement includes a First Article Test requirement to ensure quality standards are met before full delivery. The primary delivery timeline is 493 days, with an original required delivery date of May 23, 2026. Packaging and marking must strictly comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA procurement requirements.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-22CG
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A6-26-T-22CG for the procurement of one power cable assembly. This federal requirement is identified by NSN/Part Number 6150-01-680-9963 and is associated with purchase request 7017924723. The solicitation was posted on August 24, 2026, and the deadline for responses is September 1, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-T-6183
This contract, issued under solicitation SPE7M2-26-T-6183 by the Department of Defense’s Nuclear Reactor Program, solicits the supply of 7,597 electrical contacts identified by NSN 5999-01-082-0297, classified as a commercial item and listed on a qualified products list. Delivery is required within 220 days after award, with FOB Origin terms and final delivery to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, along with packaging and preservation standards per MIL-STD-2073-1E, including preservation method 41 and packaging code U. Each unit pack must be marked in accordance with MIL-STD-129 and SAE AS39029, which mandates the display of both the current and most recently superseded part numbers on the label, though the requirement to include the superseded number may be waived as long as the present part number remains visible. Mercury and mercury compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, sensors, and weapon systems, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and all invoicing must be submitted electronically through Wide Area WorkFlow, consistent with contract clause requirements. The contract incorporates numerous FAR clauses including those related to equal opportunity, employment eligibility verification, combating human trafficking, safeguarding contractor information systems, and hazardous material identification, with multiple deviations approved under Deviation 2026-00038. The contractor must also comply with specific representation and certification requirements including UEI and CAGE code disclosures, size status affirmations, and socioeconomic status declarations if claiming small business status. No option quantities or pricing details are provided, and the contract is awarded under simplified acquisition procedures without a defined contract type beyond fixed-price. All submissions are required through the DIBBS portal by August 20, 2026, and performance is subject to the full scope of federal acquisition regulations and defense-specific standards.
NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-Q-1355
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 504 feet of special cable assemblies under NSN 6150-01-696-7789. The contract specifies several critical compliance requirements, including CMMC Level 2 Self-Assessment and the handling of Covered Defense Information. The item is associated with part numbers from Anixter Inc., Prysmian Group Specialty Cables LLC, and Electric Boat Corporation. Delivery is required within 190 days after receipt of the order, with FOB origin and both inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. The solicitation is open for responses until September 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-21XH
This contract is for the procurement of one special electrical cable assembly, identified by NSN 5995-01-722-4532 and Hyperion Technology Group Inc part number 7500-2250. The solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-21XH, requires delivery within 20 days of order. The item is to be delivered FOB Origin with inspection and acceptance occurring at the destination, specifically Camp Pendleton, California. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with strict zero-nonconformance requirements for sample lots. Shipping must be conducted via traceable means, and the use of parcel post is explicitly prohibited.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-22CM
The Defense Logistics Agency of the Department of Defense has issued solicitation SPE4A6-26-T-22CM for the procurement of one cable assembly, identified by NSN/Part Number 6150-01-364-2882. This federal requirement is tracked under purchase request 7017942800. The solicitation was posted on August 24, 2026, and requires a response by the deadline of September 1, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-21YD
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 14 units of a RADI cable assembly, identified by NSN 5995-01-677-8566. The contract requires delivery within 338 days after the order is placed and falls under NAICS code 335931. Performance is designated for Tracy, California. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification via a C3PAO and the protection of Covered Defense Information. Suppliers must adhere to DLA packaging requirements, physical item marking, and the removal of government identification from non-accepted supplies. Furthermore, the project is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DOD export-controlled technical data training.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M8-26-T-6182
This procurement solicitation, issued by DLA Land and Maritime under solicitation number SPE7M826T6182, seeks the acquisition of 26 pressure switches identified by NSN 5930013206933. The items are to be delivered to DLA Distribution Jacksonville within 61 days after order. This is a source-controlled drawing item, meaning the products must strictly adhere to the requirements of the cited drawing, with approved sources specifically identified as 14314 PH8P131 and 98505 15559-2. The solicitation is being conducted as a Request for Quote (RFQ) and requires all submissions to be made electronically. Interested and responsible sources must submit their quotes by the response deadline of August 31, 2026. Hard copies of the solicitation are not available, and all necessary digitized drawings, military specifications, and standards must be retrieved or ordered electronically through the provided links. Questions regarding the solicitation should be directed to the buyer listed in the official documentation.
ELECTRICAL DEVICES DIV

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWE
Solicitation # SPE4A6-26-T-22CJ
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE4A6-26-T-22CJ for the procurement of two power cable assemblies, identified by NSN/Part Number 6150-01-463-7008. This federal requirement is tracked under purchase request 7017933410. The solicitation was officially posted on August 24, 2026, and the deadline for responses is September 1, 2026. Interested parties can access further details and submit their responses through the DIBBS portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-21YM
This solicitation is for the procurement of three cable assemblies under contract number SPE4A6-26-T-21YM for the Department of Defense ASC Commodities Division. The delivery timeline is set for 208 days after order, with a response deadline of September 1, 2026. The contract requires strict adherence to DLA packaging requirements and specific sampling methods based on MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances for acceptance. Compliance mandates include CMMC Level 2 certification for third-party assessment and production lot testing. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. All technical and quality requirements are governed by the DLA Master List, and inspection and acceptance will occur at the origin.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-22CL
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A6-26-T-22CL for the procurement of one Cable Assembly, Spec, identified by NSN/Part Number 6150-01-680-5150. This federal requirement is tracked under purchase request 7017948199. The solicitation was posted on August 24, 2026, and requires a response by the deadline of September 1, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE7M4-26-T-328H
The contract solicitation for a pressure switch, designated by NSN 5930009465398 and part number 65652-9022-103, is issued under SPE7M4-26-T-328H by the DLA Land and Maritime Fluid Handling Division. Six units are required to be delivered within five days of the delivery order, with FOB origin terms and no variance permitted in quantity. Delivery is directed to G&B Packing Company in Jersey City, NJ, with final destination to the Government of Israel, Ministry of Defense. The product must conform strictly to source-controlled drawing specifications, and only approved sources listed on the drawing are authorized unless later qualified through the cognizant design activity. Packaging and preservation must comply with MIL-STD-2073-1E and MIL-DTL-28786, with marking governed by MIL-STD-129, including standardized barcoding and no special marking required. The item has no shelf life and surplus is not acceptable. The contract incorporates extensive cybersecurity and compliance requirements, including mandatory CMMC Level 2 self-assessment and adherence to NIST SP 800-171 for safeguarding Covered Defense Information, as enforced through DFARS clauses and deviations. Contractors must comply with FAR and DFARS clauses addressing trafficking in persons, employment verification, sustainable products, hazardous material identification, and safeguarding contractor information systems. Cybersecurity compliance is reinforced through clause 52.240-93 and 252.240-7997, with deviations applicable to multiple clauses including those on contract changes, subcontracting, small business representation, and system maintenance. The contract mandates use of WAWF for invoicing and receiving reports, with payment processed through DoDAAC. Offerors must disclose UEI and CAGE codes, represent their small business status under applicable socioeconomic categories, and comply with non-manufacturer and joint venture rules if applicable. No evaluation factors or contract type are specified, and unit pricing is not provided, but submissions must be made electronically via DIBBS by August 20, 2026, with full adherence to all referenced technical, quality, packaging, and cybersecurity standards.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15WU
Solicitation SPE4A6-26-T-15WU is a procurement request by the Department of Defense, ASC Commodities Division, for 1,477 units of threaded pin-rivets (NSN 5320014527666). This is a critical application item identified as Commercial Off The Shelf (COTS), requiring a manufacturer Certificate of Compliance conforming to DI-MISC-81356 and documentation of ownership transfers to ensure traceability to the certified lot. Due to the nature of the item, casting or forging may be required, and offerors are directed to the DLA Casting and Forging Assistance Request process if tooling or material information is needed. The contract specifies a delivery window of 100 days after receipt of order, with a need ship date of November 29, 2026, and a final required delivery date of January 3, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must comply with MIL-STD-129. All payment requests and receiving reports must be submitted electronically via Wide Area WorkFlow (WAWF). The solicitation closed for responses on August 20, 2026.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-T-16DP
This contract is for the procurement of 1,152 units of Turnlock Fastener Stud Assemblies, identified by NSN 5325-01-169-5657 and Howmet Global Fastening Systems part number 26S51-22. The order is designated as a critical application item with a delivery requirement of 112 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and CMMC Level 2 self-assessment. Quality control must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21SZ
This solicitation is for the procurement of 10 headless shoulder pins under contract number SPE4A6-26-T-21SZ for the Department of Defense ASC Commodities Division. The delivery requirement is 20 days after receipt of order, with the place of performance located in Keyport. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with sampling methods adhering to MIL-STD-1916 or ASQ H1331. The contract includes strict security and regulatory compliance mandates, including CMMC Level 2 certification and the protection of covered defense information. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A6-26-T-21UR
This contract is a solicitation for the procurement of four units of a closing assembly handle for a nose landing gear kneeling door, identified by NSN/Part Number 0001S00000052. Issued by the Department of Defense ASC Commodities Division, the contract requires delivery within 590 days after receipt of order. Performance is centered at Robins Air Force Base, and the procurement falls under NAICS code 336413. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, physical identification, and bare item marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling generally required. Additionally, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specialized training to access technical data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-15WY
This contract, identified as SPE4A6-26-T-15WY, is for the procurement of 890 units of pin-rivet collars under NSN 5320-01-623-0156. The item is designated as a critical application item with a required delivery date of March 7, 2027, and a delivery window of 197 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, covered defense information, and configuration change management. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 8 hours
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-21WN
Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334514
New
DIBBS
GAGE ROD, LIQUID LEV
Solicitation # SPE4A6-26-T-21UD
This contract is for the procurement of five liquid level gage rods, identified by NSN 6680017223486 and part number 100893 from American Metal Bearing Co. Each of the five line items consists of one unit to be delivered to different naval vessels, including the USS Chung Hoon, USS Gravely, USS Jack H. Lucas, USS Daniel Inouye, and USS Mustin. The required delivery dates range from August 4 to August 18, 2026, with a delivery timeframe of 20 days. The terms specify FOB Destination for all shipments, with inspection and acceptance also occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on the use of mercury or mercury compounds in preservation and packaging. All shipments must follow DLA packaging requirements and be sent via the fastest traceable means where specified.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21YC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 12 sleeve bushings under NSN 3120-01-491-2867. The contract requires delivery within 158 days after the order is placed and is categorized under NAICS code 332991. The place of performance is located in New Cumberland, Pennsylvania. The contract mandates strict adherence to several technical and quality requirements, including CMMC Level 2 certification for third-party assessment organizations and specific DLA packaging and marking standards. Notably, the item is subject to stringent export controls under ITAR or EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data. Inspection and acceptance will occur at the origin.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
BRUSH, ELECTRICAL CONTA
Solicitation # SPE4A6-26-T-21KY
This procurement request, solicitation number SPE4A626T21KY, is issued by DLA Aviation for the acquisition of electrical contact brushes under NSN 5977015183353. The contract consists of three line items totaling 34 units, with deliveries designated for SRF and JRMC Yokosuka, USS Zumwalt DDG 1000, and USS Lyndon B. Johnson DDG 1002. All items must be delivered within five days after the order is placed. The approved source for this equipment is 0UCP5 SRP-L-11-STR. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 335999. Interested and responsible sources must submit their quotes electronically by the deadline of August 28, 2026. The solicitation is available exclusively as an RFQ via the provided electronic link, and no hard copies or separate technical drawings are available.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332991
New
DIBBS
BALL SET, BEARING
Solicitation # SPE4A6-26-T-21ZK
This contract is a solicitation for 105 units of a bearing ball set, identified as a commercial off the shelf critical application item with NSN 3110-01-481-9923 and RTX Corporation part number 4950825. The delivery timeline is set for 163 days after the order, with FOB, inspection, and acceptance all occurring at the origin. A primary requirement of this agreement is strict adherence to domestic sourcing restrictions. The bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract mandates specific packaging and preservation standards according to MIL-STD-2073-1E and MIL-DTL-197M, explicitly prohibiting the use of mercury or mercury compounds.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-21XM
This solicitation is for the procurement of 13 annular ball bearings, part number 2553379, under solicitation number SPE4A6-26-T-21XM. The requirements specify that the bearings must be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component costs originating from these regions. Acceptable sources include The Barden Corporation and New Hampshire Ball Bearings Inc. Technical specifications include a raceway surface finish not exceeding 2 micro-inch AA and the use of lube/oil L01 per MIL-PRF-6085D. The contract mandates strict adherence to DLA packaging, marking, and quality requirements, including MIL-STD-129 and MIL-DTL-197M. The items are subject to a 12-month extendable shelf life and require a contractor declaration regarding the domestic or foreign nature of the materials. Delivery is required within five days after order, with inspection and acceptance occurring at the destination. Cybersecurity compliance via CMMC Level 2 self-assessment and adherence to covered defense information regulations are also required.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-21VJ
This contract is for the procurement of 18 sleeve bushings, identified by NSN 3120-01-354-0277 and part number 4-195-9-00215 from Grove U.S. LLC. The solicitation, numbered SPE4A6-26-T-21VJ, is issued by the Department of Defense ASC Commodities Division. Delivery is required within 165 days after order, with a need ship date of February 14, 2027, and an original required delivery date of July 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.
Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details