Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Production Lot Testing and Quality Reporting

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

General Info

Production lot testing and quality reporting for DLA in San Diego by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-1952.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE ASSEMBLY, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized production lot testing for prime contractors on DLA Weapons Support Fluid Handling Division projects. Executes Production Lot Tests (PLT) and inspections based on zero-based sampling plans such as MIL-STD-1916 using pressure testing and leak detection systems. Requires CMMC Level 2 for sensitive data handling. Delivers a detailed Production Lot Test (PLT) Report and certified test results.

Similar Contracts

Same NAICS industry code

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 4 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Reporting for Aviation ComponentThis subcontract involves performing First Article Testing and reporting for aviation components supporting the Defense Logistics Agency Weapons Support Aviation Supply Chain. The selected contractor will conduct validation tests specifically for NSN 1660-01-714-4398, coordinate in-process verification with the Government Quality Assurance Representative, and produce a final formal test report. To execute this work, the contractor must utilize precision measurement equipment and maintain CMMC Level 2 compliance. The project falls under NAICS code 541380 and requires the delivery of a completed First Article Test Report as the primary deliverable.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Nonmetallic Tubing (NSN 4710-01-662-6904)This subcontract involves the supply of one unit of nonmetallic tubing, part number 1051F-21-03 under NSN 4710-01-662-6904, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the tubing in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Notably, the use of additive manufacturing is prohibited for this requirement. The contractor must ensure that packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards, respectively. The final product is to be delivered FOB Origin to Camp Humphreys in South Korea. This opportunity falls under NAICS code 326122 and is managed by the Department of Defense.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Metal Tube Assemblies (NSN 4710016532686)This subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture or procurement of eight metal tube assemblies under NSN 4710016532686. The contractor is responsible for utilizing metal fabrication and quality assurance testing equipment to deliver the completed units to Tinker AFB. Strict adherence to quality and documentation standards is required, specifically performing sampling and inspection according to MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the provider must ensure all supply chain traceability documentation meets the requirements established in August 2016.

POSTED

about 4 hours ago

DEADLINE

Supply of Square/Rectangular Metallic Tubing (ASTM A513)This subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the manufacture or sourcing of square and rectangular metallic tubing for prime contractors. The specific requirements call for 1 inch square tubes with a 0.125 inch wall thickness and 24 feet length, adhering to ASTM A513 Grade MT 1010 to MT 1020, Type 2 (A.W.C.R.), Flash In standards. The contractor must utilize precision cutting and forming equipment to ensure all dimensional tolerances and DLA packaging requirements are met for the delivery of NSN 4710010841168. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332312, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Scrapers (NSN 1710999813941)This subcontract involves the procurement of 14 units of a specific scraper component, identified by NSN 1710999813941, to support prime contractors working on projects for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for sourcing the parts and ensuring that all items are packaged in accordance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. The final delivery of all 14 scrapers is required by June 7, 2026. The performance of this contract is associated with NAICS code 423830 and will be executed in New Cumberland, Pennsylvania.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Seamless Titanium Alloy Tube SupplierThis subcontract involves the supply of 16 seamless plain round titanium alloy tubes for the DLA Weapons Support Fluid Handling Division. Each tube must be manufactured to specific dimensions, featuring a 0.750 inch outer diameter, a 0.065 inch wall thickness, and a length of 8 feet. Performance takes place in Cherry Point, North Carolina, under NAICS code 332999. The supplier must ensure strict adherence to source-controlled drawings, ASTM D3951, and MIL-STD-129 packaging standards. A Certificate of Quality Compliance is required for the order and must be uploaded to the iRAPT system. The response deadline for this opportunity is November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Nut Assembly (Tube Coupler) SupplyThis subcontract involves the manufacture or sourcing of 16 units of the Nut Assembly, Tube Coupler, identified by NSN 4730012461366. The items must be produced in accordance with TDP Rev A Gen 1 and delivered to the DLA Weapons Support Fluid Handling Division. Compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling is mandatory. The contract is managed under NAICS code 332996 with performance taking place in Jacksonville. To be eligible for this award, contractors must maintain active registrations in both SAM and WAWF. The response deadline for this requirement is November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Marine Hatch Assembly (NSN 2040015355766)This subcontract involves the manufacture or procurement of one Marine Hatch assembly under NSN 2040015355766 for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring the assembly is produced from marine-grade materials and adheres to strict marking, labeling, and packaging standards as defined by MIL-STD-129 and MIL-STD-2073-1E. Compliance requirements are rigorous, necessitating adherence to ITAR and EAR export controls, as well as CMMC Level 2 and NIST SP 800-171 security assessments. The final deliverable is a single completed, packaged, and labeled marine hatch assembly. Interested parties must respond by November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Sediment Strainers (NSN 4730001257948)This subcontract involves the manufacture or procurement of two sediment strainers meeting NSN 4730001257948 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all units are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The project falls under NAICS code 332996 and is managed by the Department of Defense. Performance will take place in Jacksonville, with a response deadline set for November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply and Traceability Management for Critical Hose AssembliesThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, requires the procurement and supply of nonmetallic hose assemblies, specifically part numbers C-MBEU147231 or MBEU147231, for prime contractors providing life support equipment. The selected provider must source these components from authorized suppliers and ensure strict supply chain traceability in accordance with DLAD C03. Additionally, all deliveries must include the necessary quality and provenance certifications to verify authenticity and standards. Operational requirements include adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. Entities acting as non-manufacturers are required to hold SAE AS9100 certification. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026, falling under NAICS code 423840.

Industrial Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Critical Safety Nonmetallic Hose AssembliesThis subcontract, issued by the Department of Defense DLA Weapons Support Fluid Handling Division, involves the manufacturing of critical safety nonmetallic hose assemblies for prime contractors providing life support equipment. The selected provider must fabricate assemblies to Martin-Baker Aircraft Company Limited part numbers C-MBEU147231 or MBEU147231, ensuring strict adherence to SAE AS9100 standards. The contractor is required to maintain SAE AS9100 certification and implement comprehensive supply chain traceability in accordance with DLAD C03. All deliverables must be marked and packaged according to MIL-STD-129 and MIL-STD-2073-1E standards and must be accompanied by full traceability documentation. The response deadline for this requirement is November 12, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supply of Straight Pipe-to-Hose AdaptersThis subcontract involves the supply of two straight pipe-to-hose adapters to prime contractors supporting the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The required materials must match NSN 4730013466227 and either Gates Corporation part number 4-8MPX or 7302-0918-5. All deliverables must be palletized according to DLA Packaging Requirements RP001. The opportunity is categorized under NAICS code 332999, with a response deadline set for November 9, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Steel Pipe Nipple SupplierThis subcontract involves the supply of steel pipe nipples for prime contractors fulfilling DLA supply contracts under the Department of Defense. The required components are 1/4 inch nominal pipe size with a 1-1/2 inch nominal leg length, manufactured in accordance with ASTM A733 specifications. All items must be delivered with a Certificate of Conformance per FAR 52.246-15 and must strictly adhere to the Buy American Act and Berry Amendment. Logistical requirements specify that packaging must follow ASTM D3951 and RP001 standards, with labeling compliant with MIL-STD-129. The specific item requested is NSN 4730010909148, with performance taking place in El Paso. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing for Humidity-Temperature Probes

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

Specialized Testing and Certification Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Fan Performance and Shock Testing

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) Services for Electrical Wire

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Testing and Certification Services (MIL-STD-831)

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS