This Government Contract opportunity from Department Of Defense was posted on October 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Production Lot Testing (PLT) Support

Closed

Federal

Submission Closed10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a fee-for-service subcontract to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, requiring a qualified industrial hygiene consultant to evaluate potential exposures for 27 students and instructors during activities such as masonry, grinding, and sand handling. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA action levels of 25 µg/m³ and permissible exposure limits of 50 µg/m³. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for dust control. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on November 6, 2026. A complete proposal must include a bid sheet, a completed supplier packet with a W-9 and self-certification form, proof of insurance, and three references for similar projects. Evaluation is based on best value, focusing on the consultant's qualifications, technical sampling approach, and estimated schedule. The contract mandates compliance with Service Contract Labor Standards (WD#2015-4193 Rev 32) and various FAR regulations, including small business utilization and the protection of government interests for subcontracts exceeding $45,000. Award opportunities are open to various SBA-certified small business categories, including VOSB, SDVOSB, WOSB, and HUBZone.

POSTED

DEADLINE

Testing Laboratory Services

Mcduffie County Board of Commissioners

POSTED

DEADLINE

Pavement Testing & Quality Assurance

POSTED

DEADLINE

Environmental Sampling and AnalysisThis subcontract for Environmental Sampling and Analysis supports prime contractors working on North Northamptonshire Council facility projects. The selected provider will deliver specialized laboratory testing services for gas and leachate samples, specifically performing chemical analysis of leachate and monitoring gas composition, including Methane, CO2, and O2. These services are critical for verifying that project operations remain in compliance with Trade Effluent Consents and Environmental Permits. To qualify for this engagement, the service provider must hold MCERTS or UKAS accreditation and be capable of delivering certified laboratory analysis reports. Interested parties must submit their responses by December 2, 2026, in accordance with the solicitation posted on November 4, 2026.

North Northamptonshire Council

POSTED

DEADLINE

NFPA 1932 Ladder Inspection and Certification ServicesThis subcontract for NFPA 1932 Ladder Inspection and Certification Services involves performing safety inspections and structural testing of fire department ground ladders for prime contractors on CAL FIRE projects. Located at the Atwater Training Center in Madera, the scope of work includes visual inspections, heat sensor testing, roof hook testing, horizontal bending tests, and extension ladder hardware testing. All activities must be conducted using NFPA-compliant measurement tools and testing rigs in accordance with manufacturer specifications and NFPA 1932 standards. The contractor is responsible for the inspection and certification of compliance for 2,500 linear feet of ladders, with final deliverables consisting of detailed inspection reports. This opportunity was posted on November 4, 2026, with a response deadline of November 20, 2026. The project falls under NAICS code 541380 and is managed through the California state procurement system.

POSTED

DEADLINE

Structural Testing & Inspection AgencyThis subcontract opportunity with the City of Sandy Springs in Georgia seeks a Structural Testing and Inspection Agency to provide independent quality assurance for structural materials and soil on city improvement projects. The selected contractor will be responsible for verifying structural fill compliance, determining particle size and plasticity, observing proof rolling, and conducting field density tests using nuclear density gauges and sand-cone equipment in accordance with ASTM D6938 and D1556 standards. Key deliverables include the submission of soil test reports and concrete mixture designs. To qualify, the contractor must hold an ACI Concrete Field-Testing Technician Grade 1 certification. The solicitation was posted on November 4, 2026, and responses are due by January 5, 2027.

City of Sandy Springs

POSTED

DEADLINE

EMLAP Accredited Mold Laboratory AnalysisThis subcontract opportunity is for the provision of professional laboratory analysis of environmental samples to support prime contractors on projects located at the Springfield-Beckley Air National Guard Base. The scope of work involves the identification and quantification of mold spores and microbial growth through the analysis of air, surface, bulk material, dust, and tape-lift samples. The selected provider must deliver certified laboratory analysis reports along with complete chain-of-custody documentation. To be eligible, the service provider must operate a microbiology laboratory that holds accreditation from the AIHA Environmental Microbiology Laboratory Accreditation Program (EMLAP). This requirement falls under NAICS code 541380. Interested parties must submit their responses by the deadline of December 9, 2026.

Adj324100 S Foma 178th Srm Adjsce

POSTED

DEADLINE

BLDG 122 & 144 Mold Testing

Solicitation # SRC0000042884

Solicitation SRC0000042884 is a request for quotes from the State of Ohio Adjutant General's Department to obtain qualified environmental inspection and testing services for buildings 122 and 144 at the Springfield-Beckley Air National Guard Base in Springfield, Ohio. The contractor is required to perform visual assessments, moisture investigations using non-destructive equipment, and HVAC inspections of air-handling units and vents. The scope includes mold-related sampling and laboratory analysis, which must be conducted by a laboratory accredited under the American Industrial Hygiene Association Environmental Microbiology Laboratory Accreditation Program. The final deliverable is a searchable PDF assessment report identifying findings, affected locations, and recommended corrective actions with associated cost estimates, due within 10 business days of the site visit. The contract has a period of performance of 60 days and will be awarded to the lowest responsive and responsible bidder. Bidders must submit an itemized quote, a signed bidder certification, and a specific dumpster spreadsheet via the OhioBuys portal by the December 9, 2026, deadline. Key requirements include compliance with the Build America, Buy America Act, the provision of a one-year warranty on all work, and the submission of qualifications for the project manager and field personnel. The contractor assumes full responsibility for personnel safety on site and must return all base passes within five days of the final inspection.

Adj324100 S Foma 178th Srm Adjsce

POSTED

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract for the Department of Defense DLA Weapons Support Fluid Handling Division involves performing production lot testing and quality validation for CUNI pipe flanges. The selected contractor will coordinate random sample selection with the Government QAR and execute tests according to the Technical Data Package to ensure quality conformance. Key deliverables include the preparation of DD Form 1222 and detailed certified test reports. The project is based in New Cumberland and falls under NAICS code 541380. Due to the handling of export-controlled technical data, the contractor must maintain CMMC Level 2 and JCP certifications. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Execution and ValidationThis subcontract, titled First Article Testing (FAT) Execution and Validation, is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The primary objective is to perform First Article Testing for prime contractors to validate the structural integrity of aerospace components. The scope of work includes coordinating the delivery of one test unit to the First Article Monitor at Tinker AFB, Building 469, and executing all necessary validation tests in accordance with FAR 52.209-4 requirements. The contractor is required to complete the validation process and deliver one validated First Article unit along with a comprehensive test approval report within 180 calendar days. The performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this project categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) Production and CoordinationThis subcontract for First Article Testing Production and Coordination supports prime contractors delivering to the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the initial production and submission of first-article samples, which includes producing a sample unit for government testing and providing a comprehensive technical documentation package consisting of drawings, specifications, engineering instructions, certifications, and inspection sheets. Administrative duties include managing WAWF receiving reports and coordinating shipping to the test facility. The performance of this contract takes place at Robins Air Force Base, and the primary deliverable is one First Article Test sample accompanied by all required technical documentation.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services supports prime contractors under the DLA Weapons Support Aviation Supply Chain. The primary objective is to execute contractor testing in accordance with procurement note E03 to ensure that aviation-grade shear bolts comply with all required technical and material standards. The scope of work involves utilizing specialized laboratory equipment for material verification and culminates in the delivery of a formal Production Lot Test approval and certification report. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in Cherry Point. Interested parties should note the solicitation timeline, which includes a posted date of November 4, 2026, and a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

This subcontract opportunity is for Production Lot Testing support provided to prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for performing quality inspections and PLT coordination, specifically conducting internal attribute or variable inspections in accordance with MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. Key deliverables include the preparation of sample packages, including DD Form 1222 and DD250, to ensure a validated production lot and documentation package are ready for government acceptance. The contract requires the provider to maintain ISO 9001:2015 or AS9100 certification. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380. Interested parties must submit their responses by October 20, 2026.

General Info

Production Lot Testing and quality inspections for DLA Weapons in New Cumberland, PA.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-2074.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 12

subcontract

Response DeadlineOct 20

Deadline has passed

Submission Closed

10/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Performs quality inspections and PLT coordination for prime contractors on DLA Weapons Support ASC projects. Conducts internal attribute or variable inspections per MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 and prepares sample packages including DD Form 1222 and DD250. Requires ISO 9001:2015 or AS9100. Delivers a validated production lot and documentation package for government acceptance.