This Solicitation opportunity from Mississippi was posted on August 18, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Professional Engineering and Technical Services for Programmatic Support (As Needed)

Closed

3140004310State & Local

Submission Closed10/06/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541990

New

DETROIT JCC-2026-40 BACKFLOW PREVENTER TESTING, MAINTENANCE & INSPECTION

Solicitation # detroit-jcc-2026-40-backflow-preventer-testing-maintenance-inspection

Serrato Corporation is seeking licensed contractors for the Detroit JCC-2026-40 project located in Michigan. The scope of work requires the repositioning of the backflow preventer in Recreation building 0004, as well as the provision of comprehensive inspection services for all other backflow preventers across the site. This solicitation falls under NAICS code 541990, with additional relevant codes including 541380 and 238220. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of May 31, 2027. Primary coordination for this contract is handled by Toni Robinson.

POSTED

DEADLINE

School Nutrition and Menu Planning ServicesThe School Nutrition and Menu Planning Services subcontract involves providing specialized nutritional analysis and menu design for prime contractors working on New Wave Federation primary school projects. The selected provider will be responsible for creating tailored menus, utilizing analysis software to calculate nutritional values, and offering professional guidance to catering teams regarding food preparation and presentation. Key deliverables include the production of approved seasonal menus and detailed nutritional compliance reports. To qualify for this engagement, providers must hold Registered Dietitian or certified nutritionist credentials. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The contract falls under NAICS code 541990 and is managed by the New Wave Federation.

POSTED

DEADLINE

Scientific Writing and Publication Standards Consultant

California Department of Conservation

POSTED

DEADLINE

ENVIRONMENTAL MODELING AND SIMULATION SUPPORT V (EMSS-V)

Solicitation # FA7022-27-Q-EMSS

The Environmental Modeling and Simulation Support V (EMSS-V) contract, solicitation FA7022-27-Q-EMSS, provides the Air Force Technical Applications Center (AFTAC) with highly technical scientific modeling and analytical laboratory support. This level of effort project is structured on a task order basis and focuses on both operations and maintenance (O&M) and research and development (R&D) tasks. The scope includes planning and performing studies, developing ChemCAD models, creating new analytical methods for laboratory use, and providing continuous data curation to ensure the integrity of sample collection and analysis databases. The period of performance spans eight years, from November 1, 2027, to October 31, 2035, with the majority of the work performed at the contractor's site. To be eligible, the contractor must maintain a Top-Secret Facility Clearance with Secret Safeguarding capability and the ability to provide TS/SCI personnel. Key deliverables include technical reports on vapor and particulate emissions, software model updates for thermodynamics, and baseline reports detailing project methods and cost estimates. Performance is measured against strict thresholds, including a requirement that thermodynamic model emissions data remain within 5% of contractor data and that 100% of project goals are addressed in proposed approaches delivered within three working days of the schedule. Additionally, the contractor must provide conference facilities for classified meetings of up to 50 people and adhere to DoD Workforce Certification Application (DWCA) and DD Form 254 security requirements.

FA7022 Amic Det 2 Ol Patrick Pka

POSTED

DEADLINE

711th HPW Mission Support Services MAC IDIQ

Solicitation # FA239626RB008

The 711th Human Performance Wing (HPW) Mission Support Services contract is a 100% competitive 8(a) set-aside Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) vehicle. Managed by the Air Force Research Laboratory (AFRL), the contract has an estimated maximum value of $505,000,000.00 with a five-year ordering period and a six-year period of performance. The scope of work involves providing Advisory and Assistance Services (A&AS) and non-personal medical clinical, management, and certified laboratory support services across multiple locations, including Wright-Patterson AFB and the Naval Medical Research Unit-Dayton. The contract utilizes a mix of Firm Fixed Price (FFP) and Time and Materials (T&M) pricing arrangements, with a minimum guarantee provided via the first task order for the kick-off meeting. Award is based on a technical threshold approach where the government intends to award contracts to all responsible offerors who achieve a minimum validated score of 1,740 points on a self-scoring technical capability worksheet. Cost and price are not evaluated at the IDIQ level; instead, they are determined during the fair opportunity proposal request process for individual task orders. Key requirements for offerors include maintaining an active Government Secret or higher Facility Security Clearance (FCL), with some task orders requiring Top Secret and SCI access. Performance is monitored through a Quality Assurance Surveillance Plan (QASP) focusing on staffing continuity, workforce stability, and security compliance. Proposals are due by October 30, 2026, at 3:00 p.m. EDT.

FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

DEADLINE

Independent Electrical Testing of Axon Taser 7 CEWs

Royal Canadian Mounted Police

POSTED

DEADLINE

Historical and Cultural Analysis of Deer in the New ForestThis subcontract involves providing desk-based historical and cultural analysis for prime contractors working on New Forest National Park Authority projects. The selected provider will conduct extensive research into the significance of deer, evaluate historical management policies, and analyze the complex relationships between landowners and visitors. These tasks will be performed using landscape databases and archival research to produce a comprehensive written narrative. Qualified candidates must possess demonstrated experience in landscape research and a deep knowledge of the local New Forest area. The project is categorized under NAICS code 541990 and was posted on October 26, 2026, with a response deadline of November 20, 2026.

New Forest National Park Authority

POSTED

DEADLINE

Electrical Testing and Commissioning AgentThis subcontract opportunity is for an Electrical Testing and Commissioning Agent to support prime contractors on projects for the City of San Marcos, Texas. The selected agent will be responsible for the testing and validation of installed electrical systems, specifically performing power quality analysis, relay testing, infrared thermography, and arc flash studies. To ensure technical compliance, the contractor must utilize thermal imaging cameras and power quality analyzers and must hold a NETA certification. The scope of work concludes with the delivery of essential documentation, including commissioning logs, detailed testing reports, and certifications of compliance. Interested parties should note that the response deadline for this requirement is November 19, 2026.

POSTED

DEADLINE

IEEE/ANSI Standard Transformer TestingThis subcontract opportunity, titled IEEE/ANSI Standard Transformer Testing, is issued by the General Services Administration's Supply Chain Management Contracting Division. The project involves performing certified production and post-shipping testing for prime contractors on GSA electrical procurement projects located in San Diego, California. The scope of work requires the execution of IEEE/ANSI Standard production tests and post-shipping verification to ensure operational compliance and transit integrity, utilizing high-voltage testing equipment and certified calibration tools. Qualified providers must employ factory-certified technicians to conduct these evaluations and deliver comprehensive certified test reports and validation documentation. Interested parties must submit their responses by the deadline of December 7, 2026. The contract falls under NAICS code 541990 and is focused on maintaining strict technical standards for electrical infrastructure.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Clinical Risk Management and Adverse Action Support

W39L USA Ng Readiness Center

POSTED

DEADLINE

Maintenance Service for Portable Fire Extinguishers - BPA

Solicitation # 2031ZA27Q00004

Solicitation 2031ZA27Q00004 is a request for quotations for a single-award, firm-fixed-price Blanket Purchase Agreement (BPA) to provide non-personal maintenance services for approximately 1,220 portable fire extinguishers at the Bureau of Engraving and Printing (BEP) DC Facility in Washington, D.C. The contract is a 100% small business set-aside under NAICS 541990. The period of performance spans five years, from December 1, 2026, through November 30, 2031, and is structured around annual BPA calls for inspections and as-needed calls for testing, repairs, and replacements. All work must be performed in accordance with NFPA-10 and OSHA 29 CFR Part 1910 standards. The scope of work includes annual inspections, tagging, plastic seal replacement, six-year teardowns, and hydrostatic testing at five and twelve-year intervals. Award will be granted to the offeror with the lowest priced, technically acceptable offer and no adverse past performance. Proposals must be submitted in two separate volumes, with a five-page limit for the technical volume. Technical capability may be demonstrated through the experience and ICC/NAFED certifications of the contractor or their subcontractors. Invoicing is to be processed electronically via the Invoice Processing Platform (IPP).

Office Of The Chief Procurement Officer

POSTED

DEADLINE

Combined Synopsis/Solicitation for Commercial Items Agile Professional Services (APS) Department of the Army

Solicitation # W900KK-26-R-A023

Solicitation W900KK-26-R-A023 is a 100% Total Small Business Set-Aside issued by the Army Contracting Command - Orlando to procure Agile Professional Services (APS) for the Capability Program Executive Simulation, Training, Test and Threat (CPE ST3). The primary objective is to transition CPE ST3 from a traditional staffing-based support model to a task-based, outcome-driven Agile delivery framework. This framework will provide intellectual capital lifecycle support for over 370 simulation, training, testing, and threat products across more than 400 global locations. The scope of work encompasses a wide range of technical and professional services, including engineering, acquisition, cloud computing, artificial intelligence, cybersecurity, and Foreign Military Sales support. The contract is structured as a Labor Hours/Time and Materials vehicle with a total estimated value of 16.5 million dollars. The total performance period shall not exceed 66 months, beginning February 15, 2027, and consisting of a base period for agile development and transition-in, followed by five enterprise performance option periods and a final extension option. Work will be performed at various government facilities, including primary sites in Orlando, Florida, and Redstone Arsenal, Alabama, as well as other domestic and international locations. Award will be made to the responsible offeror who is rated acceptable across all non-price factors and represents the best value, specifically the lowest total evaluated price. The evaluation is a three-phased process: Phase I focuses on written submissions including an Agile Implementation Plan and a mandatory cybersecurity compliance gate requiring a NIST SP 800-171 Rev 2 score of 110 in SPRS; Phase II involves live technical demonstrations and agile scenarios; and Phase III evaluates the proposed PWS, CDRLs, QASP, and final pricing. Key requirements for offerors include an active Top Secret Facility Clearance and the submission of an Organizational Conflict of Interest mitigation plan.

W6QK Acc-Apg-Orlando

POSTED

2 days ago

DEADLINE

in about 7 hours

AI Contract Overview

The contract issued by the Mississippi Department of Environmental Quality (MDEQ) is a requirements-based, indefinite quantity professional services agreement designed to support various environmental programmatic needs across Mississippi. The scope encompasses a broad array of technical and engineering services, including water quality modeling, monitoring, permitting, environmental assessments, data management, air quality analysis, waste management, and related technical support. The contract value ranges from 500,000 to 5 million dollars, with services to be delivered on an as-needed basis through work orders that specify scope, schedule, and costs. The procurement process emphasizes a two-phase evaluation: initially assessing the qualifications of offerors based on past performance, personnel, resources, and technical merit, followed by a detailed evaluation of task-specific qualifications for each work area. Awards will be made to those meeting minimum scores in both phases, with no guaranteed minimum or maximum workload. All contractual terms are governed by state-specific clauses, with no incorporation of FAR clauses. The contract emphasizes compliance with Mississippi laws, confidentiality, conflict of interest, insurance, and quality assurance, with provisions for amendments, scope changes, and dispute resolution primarily within Mississippi jurisdiction. Submission requirements mandate sealed proposals labeled according to strict formatting and timing instructions, including signed original and digital copies, with page limits of 15 pages per section, excluding attachments. The contract also stipulates detailed representations and certifications, including registration with SAM, UEI, and attestations regarding debarment, ethics, and legal compliance. Performance and acceptance are primarily at MDEQ’s discretion, with rights for inspection, record review, and correction of deficiencies. Overall, the agreement provides a flexible, state-governed framework for environmental technical support, emphasizing qualification-based selection, detailed compliance, and rigorous oversight.