Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PROMOTER, CHEMICAL A

Active
SPE4A5-26-T-304NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of PROMOTER, CHEMICAL A, a commercial off-the-shelf (COTS) item identified by NSN 6850-01-719-2762 and part number AP-1, supplied by ANDPAK, INC in cases containing twelve 11.0 fluid ounce cans each. A total of nine cases are required under solicitation SPE4A5-26-T-304N, with delivery due within 20 days FOB destination. Strict packaging and marking standards apply, including compliance with MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA packaging requirements, with special handling codes for hazardous materials and Type I shelf-life labeling. The item has a non-extendable 12-month shelf life requiring specific markings per special code 32. Mandatory documentation includes approved Safety Data Sheets and OSHA hazard warning labels, which must be reviewed and approved by technical personnel prior to award and submitted to the DLA Aviation HMIRS office. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs as defined. All shipments must be sent via traceable freight, not parcel post, to the designated Nellis AFB delivery address. The contract incorporates applicable technical and quality requirements from the DLA Master List, with inspection and acceptance occurring at the destination and zero tolerance for quantity variance.

General Info

Procure nine cases of PROMOTER, CHEMICAL A, NSN 6850-01-719-2762, FOB destination, 20-day delivery, hazardous markings, zero non-conformances.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

325110 - Petrochemical ManufacturingView NAICS

Place of Performance

6159 MCGOUGH PKWY BLDG 811E, NELLIS AFB, NV, 89191-7261, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-304N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Sarah Cave
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PROMOTER,CHEMICAL A
PROMOTER,CHEMICAL A
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"SDS AND OSHA HAZARD WARNING/PRODUCT LABEL (HWL) ARE REQUIRED. THE SDS
AND HAZARD WARNING LABEL MUST BE REVIEWED AND APPROVED BY
CHEMISTS/TECHNICAL PERSONNEL BEFORE CONTRACT AWARD. THE APPROVED SDS AND
LABEL MUST THEN BE PLACED IN THE CONTRACT FILE AND A COPY FORWARDED TO
THE DLA AVIATION HMIRS OFFICE (VBA)."
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
RS011: Shelf-life requirement RS001 for a TYPE I (CODE H) item with a shelf life of 12 months (non-extendable) applies to this item.
UNIT OF ISSUE = CASE (CS), ONE CS CONTAINS 12 EACH 11.0 FLUID OUNCE
CANS.
ANDPAK, INC 1KQX9 P/N AP-1 SUR-PREP 12CN/CASE
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
SPE4A5-26-T-304N
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017522926 0001 CS 9.000
NSN/MATERIAL:6850017192762
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
FB4852
FB4852 99 LRS LGRDDC
CP 702 652 3410
6159 MCGOUGH PKWY BLDG 811E
NELLIS AFB NV 89191-7261
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4852
FB4852 99 LRS LGRDDC
CP 702 652 3410
6159 MCGOUGH PKWY BLDG 811E
NELLIS AFB NV 89191
SPE4A5-26-T-304N
SECTION B
PR: 7017522926 PRLI: 0001 CONT’D
US
M/F: (TCN) FB485261912138
RDD:
PROJ: TP 3
SUPP ADD: YBZ877 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 10
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/15/2026
SPE4A5-26-T-304N NSN/Part Number: 6850-01-719-2762 Quantity: 9 CS Purchase Request: 7017522926QTY: 9 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325110
New
DIBBS
Methyl Propyl Ketone Chemical SupplyOne pint of Methyl Propyl Ketone identified by NSN 6810014591992 is to be supplied and delivered to Davis-Monthan Air Force Base in Arizona, with full adherence to federal and Department of Defense logistics standards. The contract requires proper packaging, accurate labeling, and traceable shipping documentation to ensure accountability and safety throughout the distribution chain. This procurement falls under NAICS code 325110, indicating it relates to chemical manufacturing, and is classified as a subcontract under the Defense Logistics Agency’s procurement framework. Although specific address and point of contact details are not provided, the delivery must meet all applicable DoD requirements for handling, storage, and transport of hazardous chemical substances. The solicitation was posted on July 20, 2026, and the contract is administered under the DLA system with reference identifiers SPE4AX16D9008 and SPE4A626FCVYC.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
Supply of Specialty Chemical Product (NSN 6850-01-518-9784)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325110
New
DIBBS
Supply of Petroleum Ether (NSN 6810015275797)The contract involves the procurement and delivery of one container of Petroleum Ether, identified by the National Stock Number 6810015275797, to meet federal specifications for use in cleaning or degreasing operations. This commercial solvent is intended for delivery to a U.S. military installation located in Germany, ensuring compliance with required standards for military-grade applications. The contract is structured as a subcontract under the North American Industry Classification System code 325110, which pertains to petroleum and coal products manufacturing, and is administered by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 20, 2026, though no solicitation number is provided, indicating it may have been issued under an existing framework or blanket agreement. The place of performance is not explicitly detailed beyond the country, and no point of contact or specific address is listed. The contract reference includes a DIBBS award link for tracking purposes, and the transaction is part of routine logistics support for U.S. defense operations abroad. Delivery logistics and specific packaging requirements are governed by federal specifications, though further operational details are not outlined in the available data.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
PROP UNIT CHMCLThe contract specifies the procurement of two units of chemical product identified by NSN 6850-01-518-9784, with a required delivery within 20 days after award. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. Packaging must adhere strictly to DLA standards, requiring original manufacturer’s unit packaging without any repackaging permitted. All supplies must be physically marked in accordance with government identification standards, and any non-accepted items must have government identifiers removed prior to shipment. Hazard communication compliance is mandatory, including submission of an approved Safety Data Sheet and OSHA-compliant hazard warning label, both of which must be reviewed and signed off by qualified technical personnel prior to contract award; approved documents must be filed in the contract record and copied to the DLA Aviation HMIRS office. The solicitation number is SPE4A6-26-T-08BH, posted on July 20, 2026, with responses due by July 28, 2026, under NAICS code 325110 for chemical manufacturing. The purchasing agency is the Department of Defense’s ASC Commodities Division, with performance directed to FPO, zip 09532, and primary point of contact is Marika Brown at the provided email and phone number.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325110
New
Federal
SPE4A526R0266; 6850017334594; Catalyst, Carbon Monoxide and HydrocarbonThe U.S. Department of Defense, through DLA Aviation, is seeking information on potential manufacturers capable of producing the catalyst item designated by NSN 6850-01-733-4594, used for carbon monoxide and hydrocarbon conversion. This effort is part of a sources-sought announcement under solicitation number SPE4A526R0266, issued for informational purposes only and not as a formal solicitation or commitment to award a contract. Respondents are asked to provide the manufacturer’s name, location including city and state, and a point of contact, all to be submitted to Annette Pruett at Annette.pruett@dla.mil by July 25, 2026. No funds are available for the preparation of responses, and submissions are entirely voluntary with no obligation on the government’s part to proceed with procurement. The announcement is issued under NAICS code 325110, and the managing office is located in Richmond, Virginia.
DLA Aviation

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 325110
New
Federal
68--PROP UNIT CHMCLThe U.S. Department of Defense through DLA Aviation is soliciting quotes for the procurement of two Prop Unit Chemical units with NSN 6850015189784, to be delivered to the USS DWIGHT D EISENHOWER CVN 69 within 20 days of contract award. The only approved source for this item is identified as 09647 538D7595(SE), and the solicitation is issued as a Request for Quote under number SPE4A6626T08BH. All responsible suppliers may submit electronic quotes, but hard copies are not available and no technical specifications, plans, or drawings are provided. The solicitation was posted on July 20, 2026, with a firm deadline for responses on July 28, 2026, and the North American Industry Classification System code is 325110 for chemical manufacturing. Quotes must be submitted electronically via the SAM.gov portal and only timely submissions will be considered. Primary inquiries should be directed via email to DibbsBSM@dla.mil, with further details accessible through the provided UI link or by searching the solicitation number on the DIBBS website. The contracting office is located in Richmond, Virginia.
DLA Aviation

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 325110
New
DIBBS
Xylene Chemical Supply and DistributionThe contract seeks the supply of high-purity xylene (C8H10) that complies with military and federal quality standards, requiring rigorous sourcing, batch-by-batch testing, and full quality assurance throughout production and handling. The material must be packaged for secure initial transport in accordance with defense logistics protocols, ensuring stability and purity under operational conditions. All deliverables must meet or exceed the technical specifications mandated by the Department of Defense, with strict adherence to purity thresholds and contamination controls. The contract is classified as a subcontract under NAICS code 325110 and is managed by the Medical Supply Chain MD Surg FSF within the Department of Defense. The place of performance is designated as APO with ZIP code 09094-3219, indicating delivery to a military postal address, likely supporting overseas or expeditionary operations. Responses are due by July 27, 2026, with the solicitation posted on July 19, 2026, allowing suppliers a limited window to submit proposals. No set-aside designation is specified, and the opportunity is open to qualified subcontractors capable of fulfilling the demanding purity, documentation, and delivery requirements for critical medical and surgical supply chain applications.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 325110
New
DIBBS
Supply of Toluene (Hazardous Chemical) to Spangdahlem Air BaseThe contract entails the procurement and delivery of 3,000 quarts of military-specification toluene, identified by NSN 6810005798431, to Spangdahlem Air Base in Germany. The material must fully comply with hazardous materials transport regulations and military packaging standards to ensure safety and regulatory adherence throughout handling and transit. This procurement is classified as a subcontract under NAICS code 325110, indicating it falls within the chemical manufacturing sector. The sponsoring agency is the Defense Logistics Agency under the Department of Defense, underscoring the defense-critical nature of the supply. The contract was posted on July 17, 2026, and while specific delivery timelines or point of contact details are not provided, the place of performance is clearly designated to support operations at the specified Air Base in Germany.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
Petroleum-Based Hydraulic Fluid SupplyThe contract entails the supply and delivery of 2,000 containers of petroleum-based hydraulic fluid meeting federal specifications and DPAS requirements, designated by NSN 9150009857234, to a military facility in Jacksonville, Florida. The product is intended for use in defense operations and must adhere strictly to mandated technical and regulatory standards to ensure compatibility and reliability in military equipment. Issued under a subcontract by the Defense Logistics Agency, a division of the Department of Defense, the contract is classified under NAICS code 325110, which pertains to petroleum and coal products manufacturing. The solicitation was posted on July 17, 2026, and while specific delivery timelines, pricing, and point of contact details are not provided, performance is expected to occur at the designated Florida facility. The contract is linked to a DIBBS award record, indicating formal documentation and tracking through the Defense Logistics Agency’s systems.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
Calibration Gas Supply (Single-Unit Delivery)A single unit of calibration gas identified by NSN 6830015511608 is being supplied and delivered to the USS FORREST SHERMAN (DDG 98) under a subcontract tied to Defense Logistics Agency procedures, specifically adhering to DLA procedural notes C19 and C20. The delivery must be executed through traceable shipping to ensure accountability and compliance, with the procurement governed by the NAICS code 325110, indicating the chemical manufacturing sector. The contract was posted on July 17, 2026, and is administered by the Department of Defense through the Defense Logistics Agency, with performance obligations centered on the designated naval vessel. The transaction is documented under contract SPE4A616D0226 and delivery order SPE4A626FCUPB, with full traceability ensured via the official DIBBS platform linked in the record.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
Supply of Petroleum-Based Hydraulic FluidThe contract specifies the procurement and delivery of 24 quarts of NSN 915002526383 petroleum-based hydraulic fluid to Fort Campbell, Kentucky, under FOB Destination terms, meaning the seller bears all costs and risks until the goods arrive at the specified delivery point. The fluid must be packaged in full compliance with military standards to ensure safety, performance, and regulatory adherence during transport and storage. Each shipment must include traceable documentation to support accountability, quality control, and logistical verification throughout the supply chain. The procurement is classified under NAICS code 325110, indicating it falls within the petrochemical manufacturing sector, and is administered by the Defense Logistics Agency under the Department of Defense. The contract is structured as a subcontract and was posted on July 17, 2026, with no set-aside provisions specified. Although the exact point of contact and detailed office address information are not provided, the delivery location and unique National Stock Number ensure precise identification and allocation of the material. Fulfillment requires strict adherence to defense logistics protocols to support operational readiness at the designated military installation.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details
NAICS: 325110
New
DIBBS
Supply of Aliphatic Naphtha (Hazardous Chemical)The contract involves the procurement and delivery of 5,000 gallons of Aliphatic Naphtha identified by NSN 6810002388119 to Barksdale Air Force Base in Louisiana, with strict adherence to military specifications for quality and safety. The substance is classified as a hazardous chemical, requiring compliant handling, packaging, and transportation via a traceable shipping method to ensure accountability and regulatory compliance throughout the supply chain. This subcontract falls under NAICS code 325110, indicating it relates to petroleum and coal products manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The award details are linked to contract SPE4AX16D9008 with delivery order SPE4A626FCUEW and contract number 262541, indicating an established procurement framework under existing DLA agreements. The solicitation was posted on July 17, 2026, and while specific performance location, point of contact, or set-aside status are not provided, the delivery destination and mandated military specifications underscore the critical nature of the material for defense operations. All aspects of the delivery must meet federal hazardous materials regulations and defense supply standards to ensure safe and timely receipt at the designated military installation.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
SEALING STRIPThe contract pertains to the procurement of a sealing strip with NSN 6610-00-126-6113 and part number 10201-004, under solicitation SPE4A5-26-T-303K, requiring delivery of 11 units within 333 days from the contract date, with delivery terms FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for physical identification and bare item marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, materials, and unit containment as detailed, and marking must comply with MIL-STD-129 without special markings. Palletization adheres to DLA packaging requirements, and shipment is directed to the parcel post address in Tracy, California. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract specifies the unit of issue as each (EA), with a total price of $11.00, and identifies Hien-Van Trinh as the primary point of contact for the Department of Defense’s ASC Supplier Oper OEM Division.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333914
New
DIBBS
SHAFT ASSEMBLYThe contract pertains to the procurement of two shaft assemblies with NSN/part number 4320-00-731-6506 under solicitation SPE4A5-26-T-304G, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days after award, and the solicitation closes on July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions. The supplier must comply with documentation obligations for source approval, cybersecurity requirements under CMMC Level 2, DLA packaging standards, and physical marking guidelines. Government identification must be removed from non-accepted supplies, and item unique identification is not required as specified by the service customer under DFARS 252.211-7003. Covered defense information applies, and the material has no shelf life constraint. Measuring and test equipment must be adequately maintained and calibrated. The place of performance is New Cumberland, Pennsylvania, with Courtney Minor as the primary point of contact.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333613
New
DIBBS
SHAFT, STRAIGHTThe contract pertains to the procurement of a straight shaft identified by part number 392184-7 and NSN 3040-01-544-1203, with a quantity of 14 units to be delivered FOB origin in accordance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The item is classified as a critical application item under Lockheed Martin Corp and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, indicated by R or I numbers. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Packaging must adhere to DLA-specific guidelines including palletization and the use of specified preservation methods and materials, with no special marking required. Delivery is required within 171 days of order placement, with an original required delivery date of May 13, 2027, and a need ship date of January 17, 2027. The destination for delivery is the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. No quantity variance is permitted, and the unit price is $14.00 per unit for a total contract value of $196.00. The contract is issued under solicitation number SPE4A5-26-T-303C, with a response deadline of July 29, 2026, and is categorized under NAICS code 333613. Transportation instructions are governed by DLA procedural notes C19 and C20, and the unit of issue is EA as defined by DLA standards. The point of contact for the contract is Hope Scott of the Department of Defense’s ASC Supplier Operations OEM Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
DOOR, TROUGHThe contract pertains to the procurement of one unit of a door and trough assembly identified by NSN 4010-01-584-6194 and part number 5251292, sourced from ED ETNYRE & CO. The item is a wire rope assembly with no shelf life requirement and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, including preservative method 10, clean and dry conditions, and no cushioning material. Marking requirements follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery point is FOB origin with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is November 17, 2026, with a lead time of 110 days from order, and the shipment is directed to DLA Distribution San Joaquin at Tracy, California. The solicitation number is SPE4A5-26-T-303Y, issued under a federal procurement, with the point of contact being Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details