Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Protective Coating and Finishing Application

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits the application of protective coatings on metal components using either a chemical conversion coating compliant with MIL-C-5541 Class 1A or an anodizing process meeting MIL-A-8625 Type I/IC specifications, followed by a topcoat of MIL-PRF-23377 Type I, Class C2. These treatments are designed to enhance corrosion resistance, improve paint adhesion, and ensure long-term durability in demanding environments. The work must be performed to strict military standards, with quality control procedures in place to validate compliance with all technical requirements before delivery. The contract is classified as a subcontract under the NAICS code 332813, indicating it falls within the miscellaneous alloy surface treatment sector. The performance location is specified as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, implying the work is intended for Department of Defense aerospace or maintenance operations. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, providing a seven-day window for qualified vendors to submit proposals. The procuring entity is the ASC Supplier Operations OEM Division, confirming direct alignment with defense supply chain priorities.

General Info

Apply MIL-C-5541 or MIL-A-8625 coatings with MIL-PRF-23377 topcoat at Tinker AFB by August 7, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and ColoringView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of chemical conversion coating (MIL-C-5541 Class 1A) or anodizing (MIL-A-8625 Type I/IC), followed by MIL-PRF-23377 Type I, Class C2 topcoat.

Similar Contracts

Same NAICS industry code

Hexavalent Chromium Prohibition ComplianceThe contract requires full compliance with DFARS 252.223-7008 to ensure that all products and manufacturing processes are entirely free of hexavalent chromium, aligning with strict environmental and safety standards. This prohibition extends to all materials, components, and production techniques used by the subcontractor, and must be verified throughout the supply chain to prevent any inadvertent introduction of the substance. The requirement is critical for maintaining regulatory adherence and environmental responsibility within defense-related manufacturing. This subcontract, issued under NAICS code 332813 by the Department of Defense through the CONSTRUCTION & EQUIPMENT T & IFO EQ office, is targeted for performance at Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. While no set-aside designation is specified, the contract is structured as a subcontract and must meet all technical and compliance obligations under the DFARS regulation, with documentation and certification required to prove adherence to the hexavalent chromium prohibition.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Chemical Finishing and Anodizing ServicesThe contract requires surface treatment of machined aircraft brackets using either chemical conversion coating compliant with MIL-C-5541 Class 1A or anodizing per MIL-A-8625 Type I, followed by the application of MIL-PRF-23377 Type I Class C2 primer. These processes are critical for corrosion protection, surface durability, and paint adhesion in Aerospace and Defense applications. The work must be performed to exact military specifications to ensure compatibility and performance under operational conditions. The place of performance is designated as Tinker AFB, Oklahoma, with a zip code of 73145-8000, indicating the physical location where the services are to be delivered and likely where quality verification will occur. The solicitation is classified as a subcontract under NAICS code 332813, which corresponds to Metal Finishing. The posting date is July 30, 2026, with a response deadline of August 7, 2026, signaling a seven-day window for potential vendors to submit proposals. The contracting entity is the ASC Supplier Operations OEM Division within the Department of Defense, emphasizing the nature of the work as part of a larger defense supply chain.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Metal Fabrication and Heat Treatment ServicesThe contract seeks qualified small businesses to provide post-machining thermal processing services including annealing, tempering, and brazing for components that must meet stringent military performance specifications. These heat treatment processes are essential to ensure material integrity, hardness, durability, and dimensional stability under operational conditions typical of defense equipment. The work is specifically tied to the production or maintenance of combat vehicles and armament systems under the oversight of the Department of Defense’s LSO Combat Vehicles and Armament office. This is a total small business set-aside as defined by the SBA under FAR 19.5, meaning only small businesses are eligible to bid, and the solicitation is open specifically to those classified under NAICS code 332813 for Metal Heat Treating. The place of performance is designated as Texarkana, Texas with a ZIP code of 75507-5000. Interested vendors must submit proposals by the response deadline of August 10, 2026, and the solicitation was posted on July 30, 2026. The contract is structured as a subcontract and can be accessed via the DIBBS system using the provided link for further details.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Bronze Fitting Supply / Component Fabrication

FLUID HANDLING DIVISION

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThe contract calls for the application of Chemical Agent Resistant Coating (CARC) and high-temperature coatings in accordance with DCSC Drawing 16236 CS-2300-0001, with strict adherence to the prohibition of Class I ozone-depleting chemicals. This work is required to meet military-grade specifications for durability, chemical resistance, and environmental compliance, ensuring equipment remains protected under extreme operational conditions. The coating process must be performed without any substances regulated under the Montreal Protocol, emphasizing environmental responsibility and regulatory alignment with current defense standards. The solicitation is classified as a subcontract under NAICS code 332813, indicating it targets surface coating and coating services for industrial applications. Performance is designated for New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and all work must be completed by the response deadline of August 10, 2026. The contract was posted on July 30, 2026, through the DLA DIBBS platform, managed by the Department of Defense's DDSP New Cumberland Facility, and is exclusive to qualified subcontractors capable of meeting stringent defense coating requirements without reliance on banned substances.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Chemical Agent Resistant Coating (CARC) ApplicationThe contract requires the application of Chemical Agent Resistant Coating (CARC) to dust caps manufactured according to DCSC Drawing 16236 CS-2300-0001, replacing previous Army specification standards. This work is classified as a subcontract under NAICS code 332813, indicating it falls within the broader category of small arms, ordnance, and ordnance accessories manufacturing. The place of performance is designated as Houston, Texas, with a zip code of 77034-5592, and the contracting activity is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline set for August 14, 2026, allowing potential vendors a two-week window to submit proposals. This contract emphasizes compliance with current CARC standards as mandated by the military, ensuring the coated components meet required durability and chemical resistance specifications for operational use.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Aluminum Eye Shield ManufacturingPrecision manufacturing of moldable aluminum surgical eye shields, known as FOX EYE PATCH, is required to exact specifications measuring 2.938 inches by 2.312 inches, with full compliance to DLA technical standards and applicable medical device regulations. The contract is a subcontract under the Department of Defense’s Medical Supply Chain initiative, specifically managed by the MD SURG FSF office, with performance required at a facility in Greenville, South Carolina, ZIP code 29605-5455. The solicitation was posted on July 30, 2026, and responses must be submitted by August 5, 2026, with the NAICS code 332813 indicating classification under Other Fabricated Metal Product Manufacturing. All production must meet stringent quality and dimensional tolerances to ensure patient safety and operational readiness in surgical settings.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Prohibited Materials Compliance (Hexavalent Chromium)This contract requires strict compliance with prohibitions against the use of hexavalent chromium in coatings and plating processes, as mandated by DFARS regulations. All contractors must implement measures to prevent any unauthorized introduction or application of this hazardous substance, ensuring that all materials and techniques used in production adhere to safety and environmental standards. Comprehensive training programs must be provided to personnel involved in handling or applying coatings and platings, and detailed documentation proving compliance must be maintained and submitted as required. The contract is designated as a Total Small Business Set-Aside under SBA regulations, specifically targeting small businesses classified under NAICS code 332813, which pertains to electroplating, plating, polishing, anodizing, and coloring. It is issued by the ASC Commodities Division under the Department of Defense, with performance expected at Hill AFB, Utah, 84056-5734. Responses are due by August 7, 2026, with the solicitation posted on July 30, 2026. Subcontractors must be prepared to demonstrate full adherence to regulatory requirements through auditable records and workforce training certifications to maintain eligibility and contractual compliance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Protective Coating and Painting (Heavy-Duty Finish)This contract involves the surface preparation and application of heavy-duty protective paint to safeguard steel trailer components against corrosion under all-weather conditions, ensuring long-term durability and performance in demanding environments. The work must comply with strict quality standards to maintain structural integrity and operational readiness, particularly given the critical nature of the equipment used by federal agencies. All processes must be executed with precision to meet environmental and safety requirements, and the coating must withstand exposure to moisture, extreme temperatures, and abrasive conditions without degradation. The solicitation is designated as a Small Business Set Aside under NAICS code 332813, specifically reserved for small businesses, and is issued by FEMA under the Department of Homeland Security. Responses are due by August 7, 2026, and the contract will be performed at a location with a postal code of 20135. The opportunity was posted on July 30, 2026, and interested parties must submit proposals prior to the deadline. Although no point of contact is listed, full details and submission guidelines are accessible through the provided SAM.gov link.

POSTED

DEADLINE

Powder Coating and Protective Finish ApplicationThe contract requires the application of powder coating in Federal Standard Color 24325 to fabricated cattle guard grilles, with all work must comply with AAMA 2604-05 standards to ensure long-term corrosion and UV resistance. The coating must withstand environmental exposure while maintaining color integrity and protective performance over time. All materials and application processes must meet or exceed the specified technical requirements to guarantee durability under demanding outdoor conditions typical of rural and agricultural settings. This is a small business set-aside subcontract under NAICS code 332813, issued by the Black Hills National Forest under the U.S. Department of Agriculture. The opportunity was posted on July 30, 2026, with a response deadline of August 7, 2026, at 3:00 PM. Work is to be performed at Hill City, South Dakota, with a ZIP code of 57745. The contract is specifically reserved for small business entities, and interested parties must ensure full compliance with all technical, procedural, and regulatory requirements to be eligible for award.

Black Hills National Forest

POSTED

DEADLINE

Mechanical Testing Specimen FabricationThe contract requires the fabrication and supply of specialized metallurgical test specimens including witness bars, tensile coupons, and hot cycle fatigue coupons, all designed to meet Marshall Space Flight Center guidance and integrated directly into laser powder bed fusion build plates for material qualification purposes. These specimens must be manufactured with precise dimensional and metallurgical controls to ensure accurate mechanical performance data under simulated operational conditions, supporting NASA’s mission to validate new materials and additive manufacturing processes. The work is classified under NAICS code 332813 and is structured as a subcontract, with a strict submission deadline of August 4, 2026, emphasizing the time-sensitive nature of the material qualification effort. All delivered specimens must be traceable, properly documented, and capable of being tested under standardized conditions to provide reliable data for certification purposes. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating involvement in a high-stakes aerospace development initiative. While no specific location for performance is listed, the requirement implies close coordination with NASA’s additive manufacturing and materials testing facilities. The solicitation is open to qualified subcontractors with demonstrated expertise in metallurgical specimen fabrication and integration within laser-based additive manufacturing systems.

NASA Shared Services Center

POSTED

DEADLINE

Corrosion-Resistant Coating or Surface TreatmentThe contract seeks subcontractors to apply passivation, electropolishing, or physical vapor deposition coatings to nozzle components intended for use in high-moisture environments, with the goal of significantly improving their resistance to corrosion and enhancing long-term durability. The work is critical to maintaining performance and operational reliability in demanding aerospace and naval systems, where exposure to moisture can drastically reduce component lifespan. All proposed treatments must meet stringent technical standards to ensure consistent quality and compatibility with existing hardware. The solicitation is open for responses until August 5, 2026, and is classified as a subcontract under NAICS code 332813, indicating a focus on metal coating, heat treating, and related services. The place of performance is designated as 20670, associated with the Naval Air Warfare Center Air Division under the Department of Defense. While no set-aside provisions or specific point of contact are detailed, applicants must ensure alignment with defense-grade specifications and readiness to deliver within the specified timeframe to support mission-critical capabilities.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, PRESSURE

Solicitation # SPE4A5-26-Q-0661

The contract pertains to the procurement of 75 pressure transmitters, identified by NSN 6685-21-912-0457 and part number 622712-2-1 from Honeywell Limited, classified as a commercial item and designated as a critical application item. The requirement is firm fixed price with no variance allowed in quantity, and delivery is mandated 477 days after award date. Inspection and acceptance occur at origin, and the item is to be shipped FOB origin. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements referenced with R-numbers including RC001, RP001, RQ011, and RT001, which take precedence over any other standards. Packaging must conform to MIL-STD-129 and RP001, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items follow ASTM D3951 unless superseded by DLA requirements. Unit of issue is each, and palletization must meet DLA packaging standards. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery destination is Warner Robbins Air Force Base with specific parcel post and freight shipping addresses provided, and the material need date is June 7, 2028.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

TRANSMITTER, PRESSUR

Solicitation # SPE4A5-25-T-785M

The contract involves the procurement of five units of the NSN 6685013158618 Transmitter, Pressure, which is designated for delivery to the DLA Distribution at W1A8 within 171 days after award. The procurement is set aside exclusively for Women-Owned Small Businesses (WOSB) under NAICS code 334512, emphasizing opportunities for eligible small business vendors. The solicitation is issued as a Request for Quotation (RFQ), accessible electronically through the provided link, with no hard copies or detailed specifications, plans, or drawings available. All responsible sources are encouraged to submit quotes by the deadline of October 1, 2025, and submissions must be made electronically. The contracting agency is DLA Aviation, part of the Department of Defense, based in Richmond, Virginia. Questions regarding the solicitation should be directed via email to the designated point of contact, with further details available through the official DIBBS website. The contract emphasizes timely response and compliance with the set-aside criteria, ensuring that qualified small businesses, particularly women-owned, have the opportunity to participate in fulfilling this procurement requirement.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A5-26-Q-0618

The contract pertains to the procurement of three non-magnetic shackles identified by NSN 4030-01-481-9608 under solicitation SPE4A5-26-Q-0618, with a firm fixed price and zero variance in quantity. Delivery is required within 76 days after order date, with inspection and acceptance occurring at origin, and delivery terms set to FOB destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA's RP001 packaging requirements, including preservation methods, material specifications, and MIL-STD-129 marking without special markings. Mercury and mercury-containing compounds are prohibited in all aspects of the supply chain including preservation, packaging, and direct contact with hardware, except for specific permitted applications such as batteries, fluorescent lamps, sensors, or weapon systems as outlined by NAVSEA, which must include secondary containment. Ozone-depleting substances are entirely banned, regardless of any conflicting specification language, and all substitutions require prior approval. Technical data is proprietary or insufficient, precluding competitive sourcing, and casting or forging may be necessary for manufacturing, requiring suppliers to request tooling and material assistance through DLA’s designated channels. The item is subject to zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Item unique identification is not required per customer request, but compliance with the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date based on acquisition type. The contract is a total small business set-aside, and all deliveries must be addressed to DLA Distribution in San Diego, California.

POSTED

about 14 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE4A5-26-Q-0660

This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE4A5-26-T-308A

The contract specifies the procurement of a critical application power transformer, part number 397849-07403, with NSN 5950009576725, requiring delivery of one unit under CLIN 0001 and an identical unit under CLIN 0002, both with a five-day delivery window after award and a required delivery date of July 23, 2026. Delivery is FOB origin, with inspection and acceptance occurring at the destination, specifically at Marine Aviation Logistics Squadron 16, Building 7209, MCAS Miramar, San Diego, CA. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing RP001 for palletization and MIL-STD-129 for marking and labeling; non-hazardous items must be commercially packaged per ASTM D3951 unless superseded, while hazardous items require compliance with TQ requirement IP025 per FED-STD-313. Physical identification of the item must adhere to RQ017, and any government markings on rejected supplies must be removed per RQ011. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and unspecified attributes are treated as major with an AQL of 1.0. Cybersecurity compliance is mandatory at CMMC Level 2 via self-assessment, supported by the application of FAR clauses 52.240-93 and deviation 2026-00038, which also extend to changes, subcontracting, and contractor information system safeguarding. The contractor must hold a valid UEI and CAGE code, and represent size status and socioeconomic classifications as applicable. Invoicing must be conducted electronically through WAWF, with payment administered via the DoDAAC system. The item is classified as a covered defense item, requiring adherence to all applicable cybersecurity, packaging, handling, and reporting standards. All documentation, including delivery, marking, and compliance reporting, must align with DLA and DoD directives, with no price information provided in the contract lines despite confirmed quantities.

Welding and Soldering Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

HOUSING, AIR OUTLET,

Solicitation # SPE4A5-26-T-306Q

The contract pertains to the procurement of one unit of a housing, air outlet, identified by NSN 1660016656502 and part number 189386-2, under solicitation SPE4A5-26-T-306Q, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required 169 days after award, with a need ship date of January 17, 2027, and an original delivery target of February 13, 2028, to Tinker Air Force Base, Oklahoma, under FOB Destination terms. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i), but must be physically marked per RQ017 and packaged in compliance with ASTM D3951, with all packaging and labeling requirements superseded by the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-129, including precise palletization under RP001. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless stated otherwise; accelerated life testing at 105% of rated voltage is an approved alternative to standard testing. The contractor must comply with CMMC Level 2 self-assessment requirements and adhere to NIST SP 800-171 DOD assessment mandates, with hazardous materials properly labeled per 29 CFR 1910.1200 and reported prior to award. Inspection and acceptance occur at the destination, performed by government personnel, with contract performance governed by FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, subcontracting, safety notifications, and transportation. Payment processing is required via WAWF, with no unit price or total value disclosed in the solicitation. The contract includes mandatory representations regarding small business status, unique entity identifier, and covered defense telecommunications equipment, all to be certified by the offeror. All technical and quality specifications referenced in the DLA Master List override industry standards, and the supply must conform to all applicable packaging, marking, environmental, and cybersecurity obligations outlined in the solicitation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

ADAPTER, STRAIGHT, FL

Solicitation # SPE4A5-26-T-299Z

The contract is for the procurement of two straight flange-to-tube adapters with NSN 4730-01-196-6006 and part number 9969M50P02 from General Electric Company, issued under solicitation SPE4A5-26-T-299Z by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 171 days after order placement, with an original delivery deadline of November 27, 2027, and a need ship date of January 17, 2027. The item must be manufactured and delivered FOB destination to the DLA Distribution facility in New Cumberland, Pennsylvania, with no tolerance for quantity variance. Packaging must comply with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including RP001 for palletization and RQ017 for physical identification and bare item marking. All packaging and labeling must adhere to MIL-STD-129, including barcoding per DoD logistics standards, with the unit of issue as each and quantity per unit pack as specified. Sampling for inspection follows MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise stipulated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Inspection and acceptance are conducted at the origin. The adapter is designated as a critical application item with no shelf life requirement, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). The contract enforces compliance with hazardous material identification via FAR 52.223-3, cybersecurity protections under 252.204-7012, prohibition of hexavalent chromium, and restrictions on the use of foreign-flag vessels for shipping, which require prior approval and certification. The contractor must flow down applicable clauses to subcontractors and comply with labor laws, including combating trafficking in persons, employment eligibility verification, and whistleblower protections. Invoicing must be submitted electronically via Wide Area WorkFlow, and no pricing information is provided in the contract, as unit and total prices remain blank. The solicitation required electronic submission through

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

MOTOR-TACHOMETER GE

Solicitation # SPE4A5-26-T-307W

The contract seeks the delivery of one MOTOR-TACHOMETER GENERATOR with NSN 6105-00-068-7214 under solicitation SPE4A5-26-T-307W, with a required delivery within five days after order placement to San Diego, California. The item must conform to stringent military standards for packaging and marking, including MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling with mandatory linear and 2D Data Matrix barcodes. Physical identification of the bare item is required, and all packaging must adhere to DLA’s RP001 requirements, prohibiting parcel post in favor of traceable transportation methods. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. The contractor must comply with DLA’s Technical and Quality Requirements referenced through R and I numbers in the DLA Master List, with the applicable revision controlled by the solicitation issue or award date. The contract imposes robust cybersecurity and compliance obligations under CMMC Level 2 self-assessment and NIST SP 800-171 requirements, mandating safeguarding of covered defense information and reporting of cyber incidents per DFARS 252.204-7012. Hazardous materials must be labeled and documented with Safety Data Sheets compliant with 29 CFR 1910.1200 and submitted prior to award, and any ocean transport must use U.S.-flag vessels unless a prior waiver is granted with detailed documentation and bill of lading submission. The contractor is subject to payment levies for outstanding government debts and must immediately report any potential safety issues with the item. Invoicing must be conducted via WAWF, and compliance with FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable products, subcontracting, inspection at destination, and prohibitions on procurement from communist Chinese military companies is required. Offerors must provide UEI and CAGE codes, represent their small business status, and disclose joint venture partners if applicable, with deviations applying to multiple clauses under Deviation 2026-00038. All proposals must be submitted electronically via DIBBS by the

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-308G

The contract covers the procurement of a single structural panel, identified by NSN 1560016882236 and part number 113T1617Y103, for use in critical aerospace applications under The Boeing Company. The item is subject to stringent technical, quality, and regulatory requirements, including compliance with the DLA Master List of Technical and Quality Requirements, FAA airworthiness standards for certified parts, and configuration change management protocols. Packaging and preservation must adhere strictly to MIL-STD-2073-1E with preservation method 10, no preservation material, and packaging code U, while marking must conform to MIL-STD-129 without special markings. Palletization follows DLA Packaging Requirements for Procurement, and shipment must utilize traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Item Unique Identification is not required per the service customer’s request. Delivery is due within five days of order, FOB origin, to McConnell AFB, KS, with required dates of July 15 and July 21, 2026, depending on the line item. The contract includes multiple clauses under FAR and DFARS addressing cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, and supplier diversity, with numerous deviations authorized through formal deviation numbers. All pricing information is omitted, and no total contract value is provided, though three separate CLINs each specify one unit to be delivered. Invoicing must be processed via Wide Area WorkFlow, and contractors must comply with NIST SP 800-171 for safeguarding covered defense information, with cyber incidents requiring reporting within 72 hours. Prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Communist Chinese Military Companies apply, and the contractor must ensure compliance with all applicable hazardous materials reporting and handling standards. Supply chain traceability documentation must be retained per DLA Procurement Note C03, and the contractor is responsible for full compliance with FAA airworthiness approval requirements, including the submission of a Certificate of Airworthiness and Conformance.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-307M

The contract solicitation SPE4A5-26-T-307M is for the procurement of one unit of a shaft assembly, actuator, identified by NSN 1680010118060 and part number AA8586 from Simmonds Precision Products Inc. The item is classified as a critical application item and must be delivered 172 days after receipt of order, with an original required delivery date of February 1, 2027, and a need ship date of February 1, 2026. Delivery is FOB origin and acceptance occurs at the destination facility, specifically the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contractor must comply with stringent packaging and marking requirements per ASTM D3951 and MIL-STD-129, including barcoding with Data Matrix and UCC-128 labels, and palletization in accordance with DLA Packaging Requirements RP001. All packaging and labeling must adhere to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 where applicable. Inspection and acceptance criteria mandate zero nonconformances in sampling, using MIL-STD-1916 or ASQ H1331 Table 1 with specified verification levels and AQLs for critical, major, and minor attributes; unspecified attributes default to major level. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Invoicing must be conducted electronically via Wide Area WorkFlow. The contract includes numerous Federal Acquisition Regulation clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, safeguarding of covered defense information, changes, and subcontracting, all applied under Deviation 2026-00038 or 2026-O0025 as appropriate. Compliance with prohibitions on covered defense telecommunications equipment and hexavalent chromium is mandatory, and the contractor must affirm its small business status, UEI, and CAGE code, with additional reporting triggered if covered equipment is provided. The contracting officer has not specified the contract type, pricing, or evaluation factors, leaving offerors to submit competitive proposals under an undefined acquisition strategy. All submissions must be made through the DLA Internet Bid Board System by the response deadline of August 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

SENSOR ASSY, SKIN TE

Solicitation # SPE4A5-26-T-307L

The contract pertains to the procurement of a SENSOR ASSY, SKIN TEMPERATURE, identified by NSN 1680007929233 and part number 969-0032-001, with a total quantity of 67 units to be delivered FOB origin to Tinker Air Force Base, Oklahoma, within 133 days of the award, with inspection and acceptance occurring at the destination. The item is classified as a commercial item, and the procurement is structured as a total small business set-aside under NAICS code 336413. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and contractors must comply with specific requirements such as RQ017 for bare item marking, RQ011 for removal of government identification from non-accepted items, and RT001 for measuring and test equipment. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified; attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement, with all UoI and QUP as contractually defined. Cybersecurity compliance requires a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 DOD assessment requirements, while safeguarding of covered contractor information systems is mandatory under applicable clauses. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). The contract includes clauses on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors, with multiple deviations applied. Invoicing must be processed electronically through Wide Area WorkFlow, and delivery must be to the designated DLA Distribution Depot Oklahoma address. The contract does not specify option quantities or a formal contract type, and pricing information for the identified line item is listed at $67.00 per unit, though additional PRLIs with higher unit costs appear in partial data without full context.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

SHAFT ASSEMBLY, ACTU

Solicitation # SPE4A5-26-T-9432

The contract specifies the procurement of a Shaft Assembly, Actuator with NSN 1680010118060 and part number AA8586, manufactured by Simmonds Precision Products Inc, under solicitation SPE4A5-26-T-9432. Four units are required at a fixed quantity with zero variance, to be delivered FOB origin within 27 days of contract award, with delivery scheduled for April 13, 2027. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly following government specifications. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the most stringent verification levels. The supplier must manage configuration changes through formal Engineering Change Proposals and ensure all non-accepted supplies are properly de-identified per RQ011. All technical, quality, and packaging directives, including those identified by R or I numbers, are binding and must be referenced from the official DLA eProcurement portal. The item is classified as a Critical Application Item, and delivery must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE