Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from New York was posted on April 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Protective Equipment Supply

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113
New
DIBBS
Supply of Nonpneumatic Ratcheting Tourniquets (TX3)This subcontract involves the supply of TX3 Nonpneumatic Ratcheting Tourniquets in Olive Drab Green to support prime contractors on Department of Defense projects managed by the DLA Troop Support Medical Supply Chain. All provided items must strictly adhere to NSN 6515-01-667-6208 and the DLA Master List of Technical and Quality Requirements. Additionally, the contractor is required to comply with the Buy American Act and the Berry Amendment, with deliveries made FOB Destination to Fort Polk. Packaging and labeling must meet specific industry and agency standards, including ASTM D3951, RP001 DLA Packaging Requirements, and Medical Marking Standard No. 1. The opportunity is categorized under NAICS code 339113, with a response deadline set for November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Patient Pelvic Sling ManufacturingThis subcontract involves the full assembly and manufacturing of single-use patient pelvic slings for prime contractors supporting Department of Defense medical supply contracts. The scope of work includes fabricating slings from seven inch wide cotton and foam webbing, integrating radiolucent buckles within Velcro loops for automatic tension limiting, and printing the necessary application manuals. The final deliverable consists of eight completed, rolled-up pelvic slings accompanied by their respective manuals. To qualify for this project, the manufacturer must maintain FDA Regulation 890.3490 Class I registration and ensure full compliance with the Berry Amendment. The work is associated with the Medical Supply Chain MD Surg FSF and is designated for performance at Fort Polk. Interested parties should note the response deadline of November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Supply of Oronasal Resuscitation MasksThis subcontract involves the supply of universal size oronasal resuscitation masks for prime contractors working on Department of Defense projects. The required masks must feature a head strap coupling and a pre-inflate cushion, with options for both disposable and reusable versions intended for manikin training. Each unit must be delivered in an individual pocket-size case that includes illustrated instructions printed on the back. All supplied equipment must strictly adhere to NSN 6515-01-276-1417 specifications. The contract is managed under NAICS code 339113 through the Medical Supply Chain MD Surg FSF agency, with the place of performance located at FPO 09595-2200. The response deadline for this opportunity is November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Sterile 4-Ply Gauze and Elastic Wrap SupplyThis subcontract involves the supply of medical-grade, latex-free textiles to prime contractors supporting DLA Troop Support medical supply contracts. The scope of work focuses on the manufacture of sterile 4-ply gauze in 3-meter lengths and medical-grade elastic wrap, utilizing a combination of synthetic fibers and medical-grade cotton. All produced materials must strictly adhere to medical grade purity standards and comply with the Buy American Act. Managed under the Department of Defense through the Medical Supply Chain MD Surg FSF, the contract allows for delivery in either bulk rolls or pre-cut lengths. Performance for this requirement is centered at Fort Polk, Louisiana. The solicitation was posted on October 27, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
OLAES Modular Bandage Assembly and SterilizationThis subcontract involves the manufacture and assembly of OLAES modular type bandages for prime contractors supporting Department of Defense medical supply contracts through the Medical Supply Chain MD Surg FSF. The scope of work includes the assembly of 6-inch by 3-meter latex-free units that integrate elastic wrap, 4-ply gauze, and plastic occlusive sheets with built-in control strips. All production must be performed in a cleanroom environment to ensure proper sterilization and must strictly adhere to Medical Marking Standard No. 1 and ASTM D3951. The contract requires the delivery of 25 sterile modular bandages with performance taking place in Fort Polk. This opportunity falls under NAICS code 339113 and was posted on October 27, 2026, with a response deadline of November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Expandable Medical Supply Bag (NSN 6530015660689)
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 18 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Hand-Operated Resuscitator ManufacturerThis subcontract involves the manufacture and supply of finished, hand-operated resuscitators for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The required products are compact, disposable, single-patient use resuscitators featuring one-way valves, oxygen ports, and transparent face masks. All units must be delivered in sealed containers of ten and strictly adhere to Medical Marking Standard No. 1 and ASTM D3951. Compliance with the Buy American Act and the Berry Amendment is mandatory for this engagement. The performance of the contract is centered in Fort Polk, Louisiana, under NAICS code 339113. Interested parties must note the response deadline of November 2, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Manufacture and Supply of Special Purpose Electrical Cable AssembliesThis subcontract involves the manufacture and supply of 14 special purpose electrical cable assemblies, specifically NSN 5995-01-628-9520, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must fabricate the units in accordance with the DLA Master List of Technical and Quality Requirements, ensuring all items are tested, marked per RQ017, and packaged according to ASTM D3951 and MIL-STD-129 standards. The project is categorized under NAICS code 339113 and requires the contractor to complete a CMMC Level 2 self-assessment. Performance will take place in Tracy, California. Interested parties must respond by November 4, 2026, to provide the completed and packaged assemblies as specified in the technical requirements.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
NAICS: 339113
New
DIBBS
Supply of Absorbable Surgical Sutures (NSN 6515-01-604-1967)This subcontract involves the supply of absorbable surgical sutures for prime contractors supporting DLA Medical supply contracts under the Department of Defense. The specific requirement is for one box of 36 plastic glycolide lactide copolymer sutures, size 4-0 and 27 inches in length, featuring a B3 1/2 CIR 36S configuration in a natural color. The deliverables must strictly adhere to MIL-STD-129 standards for marking and storage, as well as RS001 shelf-life requirements. The items are to be delivered to a designated government facility located at FPO 09595-2200. This procurement falls under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Hemorrhage Control Clamp ManufacturingThis subcontract involves the manufacturing of combat-ready hemorrhage control clamps for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The scope of work requires the precision assembly of stainless steel and medical-grade polycarbonate plastic components according to Innovative Trauma Care design specifications. The final deliverables are non-sterile devices designed for self or buddy application in the field. To ensure operational effectiveness, all manufactured devices must strictly adhere to DLA and military standards for medical devices. The project falls under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF. Performance of the contract is associated with FPO 09595-2200.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Supplier of Hand Sealer for Blood PacksThis subcontract opportunity with the Department of Defense Medical Supply Chain involves the provision of a specialized medical hand sealer, NSN 6515-01-375-0123, designed for prime contractors. The device must be compatible with the Fenwal hand sealer kit to ensure a hermetic seal on blood pack unit tubings. Delivery is required FOB Destination to APO 96260-5479, with a response deadline of November 2, 2026. The supplier must adhere to strict regulatory and quality standards, including FDA registration, listing, and compliance with Good Manufacturing Practice standards. Additionally, all items must meet Medical Marking Standard No. 1 and be packaged according to MIL-STD-2073-1E and MPPWN00001. This procurement falls under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 18 hours ago

DEADLINE

in 5 days
NAICS: 339113
New
DIBBS
Supply of Clearance Marker Lights (NSN 6220-01-503-8221)
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 9 days

AI Contract Overview

Show more

The State University of New York is seeking a subcontractor for the supply of safety-certified protective gear, specifically batting helmets, catcher's gear, and shin guards. This procurement opportunity falls under NAICS code 339113 and is managed through the New York state agency. The solicitation was posted on April 10, 2026, and requires all responses to be submitted by the deadline of May 6, 2026. Interested parties can access further details and submit their proposals via the provided SciQuest bidding portal.

General Info

SUNY seeks subcontractors for safety-certified protective sports gear by May 6, 2026.

Agency

State University of New York

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 25/26-083MC.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SBU/Baseball and Softball Equipment

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyState University of New York
ContactsNo contacts available
OfficeN/A
Organization / AgencyState University of New York
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of safety-certified protective gear including batting helmets, catcher’s gear, and shin guards.

More opportunities from State University of New York

Same awarding agency

NAICS: 238210
New
SLED
Low-Voltage Cabling and InfrastructureThis subcontract for Low-Voltage Cabling and Infrastructure involves the installation of cabling, conduits, and supporting infrastructure for prime contractors at the State University of New York Stony Brook facility. The scope of work specifically focuses on Math Tower Room 1125, where the contractor is responsible for pulling Cat6/6a and fiber optic cabling through walls and ceilings, installing cable trays or conduits, and performing terminations at AV racks and endpoints. The selected provider must ensure all work complies with New York State electrical codes and SUNY safety regulations to deliver a fully installed and tested cable infrastructure. Interested parties must submit their responses by November 19, 2026, in accordance with the solicitation posted on October 26, 2026.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 423610
New
SLED
AV Equipment SupplyThis subcontract for AV Equipment Supply involves the procurement and delivery of audio-visual hardware, components, and peripherals for prime contractors working on State University of New York Stony Brook facility projects. The scope of work specifically requires the provision of projectors, LED displays, audio mixers, microphones, and AV cabling that adhere to strict technical specifications, with all materials to be delivered to the Math Tower site. The opportunity is categorized under NAICS code 423610 and was posted on October 26, 2026, with a response deadline of November 19, 2026. Interested parties can find further details through the provided SciQuest bidding portal for the State University of New York.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 541519
New
SLED
AV Systems Integration and InstallationThis subcontract for AV Systems Integration and Installation involves the installation, configuration, and testing of audio-visual equipment for prime contractors at SUNY Stony Brook. The scope of work includes the installation of hardware such as displays, projectors, microphones, speakers, and control systems, as well as necessary cabling, wiring, system calibration, and commissioning. The primary objective is to deliver a fully operational AV system specifically for Math Tower Room 1125. Personnel assigned to this project are required to obtain University-issued identification badges to access the facility. The opportunity was posted on October 26, 2026, with a response deadline of November 19, 2026. The project falls under NAICS code 541519 and is managed through the State University of New York.
Other Computer Related Services

POSTED

2 days ago

DEADLINE

in 22 days
View Details
New
SLED
AV Upgrade Math 1-125 SBU IFB AV IT Category
Solicitation # 222692510
The State University of New York at Stony Brook has issued solicitation number 222692510 as an Invitation for Bid for an audiovisual upgrade at Math Tower Room 1125. The project requires the selected vendor to provide all necessary services and equipment, with the award being granted to the lowest responsible, qualified bidder based on the grand total. The evaluation process involves an administrative review for completeness, a cost evaluation, and a subsequent technical review including bidder references, information security, and accessibility assessments. Finalists are further vetted for financial and organizational capacity, legal authority, and past performance. Bids must be submitted electronically via the Jaggaer platform by November 19, 2026, and must include numerical values for all items to be considered responsive. The contract stipulates that pricing is FOB Destination, Freight Prepaid, and payments will be rendered electronically upon receipt of valid invoices and approved services. Key administrative requirements include the submission of quarterly spend reports to the Contract Officer, compliance with New York State recycled product standards under Section 177 of the State Finance Law, and the potential requirement for certified payroll documentation. Additionally, the university maintains the right to return change orders without penalty within seven days of delivery.

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 484220
New
SLED
Heavy Equipment Rigging and TransportThis subcontract for Heavy Equipment Rigging and Transport involves providing specialized rigging and internal transport services for prime contractors on State University of New York Stony Brook facility projects. The scope of work includes unloading heavy or oversized research equipment from delivery vehicles and safely moving and positioning these items at their designated points of use within the facility. Under NAICS code 484220, the contract requires all personnel to hold a valid OSHA 10-hour certification to ensure safety standards are met during the handling of equipment. Interested parties must submit their responses by the deadline of December 11, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238210
New
SLED
Equipment Service Connection ContractorThe Equipment Service Connection Contractor is a subcontract opportunity with the State University of New York for facility projects at SUNY Stony Brook. The selected contractor will work under prime contractors to perform essential utility connections for research equipment, ensuring all electrical, plumbing, and HVAC services are installed according to project specifications and applicable building codes. To qualify for this role, contractors must possess trade-specific licensing and OSHA 10-hour certification, while maintaining strict compliance with New York State Prevailing Wage laws. Interested parties must submit their responses by December 11, 2026, to provide certified utility connection services under NAICS code 238210.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
New
SLED
Equipment Installation and Commissioning ContractorThis subcontract agreement involves the installation and commissioning of research equipment for prime contractors on State University of New York Stony Brook facility projects. The selected contractor is responsible for the unloading, assembly, and installation of equipment, as well as performing necessary adjustments and testing to ensure all systems meet full design capabilities and are delivered in a fully operational state. Compliance requirements include mandatory OSHA 10-hour certification and strict adherence to New York State Prevailing Wage PRC# 2026029431. The solicitation was posted on October 22, 2026, with a response deadline of December 11, 2026. This opportunity falls under NAICS code 238990 and is managed through the State University of New York.
All Other Specialty Trade Contractors

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 339111
New
SLED
Engineering Research Equipment SupplierThis subcontract for Engineering Research Equipment Supplier involves the sourcing and manufacturing of specialized research equipment for prime contractors working on State University of New York Stony Brook facility projects. The selected supplier is responsible for producing equipment according to strict technical specifications and ensuring delivery NET FOB Destination directly to the point of use. The scope of work includes providing all required manufacturer guarantees and managing the customs clearance process for any items manufactured internationally. Interested parties must submit their responses by December 11, 2026, in accordance with the solicitation posted on October 22, 2026.
Laboratory Apparatus and Furniture Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 441110
New
SLED
Full-Size Pick-Up Truck (Standard Cab, 8' Bed) SupplierThis subcontract agreement involves the procurement of one full-size pick-up truck for the State University of New York at Stony Brook University. The required vehicle must feature a standard cab and an 8-foot bed, adhering to the specifications outlined for Vehicles, Class 1-8, Group 40440. To be eligible, the supplier must be an approved contractor under New York State OGS Award 23166 and is responsible for the delivery of the completed vehicle to the designated university location. The opportunity is categorized under NAICS code 441110 and was posted on October 22, 2026, with a response deadline of October 30, 2026. Interested parties can find further details and submission guidelines through the provided SciQuest procurement portal.
New Car Dealers

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 238990
New
SLED
SBU / Engineering Research Center at Heavy & Old Engineering
Solicitation # 26/27-022MC
The State University of New York at Stony Brook is soliciting proposals for solicitation number 26/27-022MC to provide all labor, materials, equipment, and services necessary for the installation of equipment at the SBU Engineering Research Center at Heavy and Old Engineering. The scope of work includes delivery NET FOB Destination, unloading, assembly, connection of services, testing, and demonstration to ensure equipment is fully operational. The contract term is 180 days from the Notice to Proceed. Contractors are strictly required to remove all installation debris daily using their own receptacles and must provide certified payroll documentation upon request. The award will be granted based on the grand total to the lowest responsive and qualified bidder following a multi-phase review consisting of administrative screening, cost evaluation, reference checks, and a final vendor responsibility determination. Bidders must attend a mandatory pre-bidders conference on November 5, 2026, and submit proposals via the electronic sourcing system by December 11, 2026. Compliance with New York State prevailing wage rate schedule PRC# 2026029431 is required, and for projects exceeding 250,000 dollars, all on-site workers must hold OSHA 10-hour construction safety health certification. Submissions must include various mandatory certifications, including non-collusive bidding, MWBE forms, and vendor responsibility questionnaires.
All Other Specialty Trade Contractors

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 441110
New
SLED
SBU/Pick Up Truck Standard Cab, Full Size 8' Bed
Solicitation # 2627-028MC
Solicitation 2627-028MC is a Mini-Bid issued by the State University of New York, specifically Stony Brook University, for the procurement of a full-size pick-up truck featuring a standard cab and an 8-foot bed. This procurement is conducted under the New York State Office of General Services centralized contract for Vehicles, Class 1-8, Group 40440, Award 23166. Consequently, eligibility is strictly limited to approved contractors currently listed under that specific OGS award. Interested vendors must submit their responses using the mandatory Form B Mini-Bid Response Form. All submissions must be directed to the primary point of contact, Craig Darcy, by the response deadline of October 30, 2026, at 12:00 PM EDT. The solicitation was officially posted on October 22, 2026, and further details can be accessed through the provided SciQuest portal link.
New Car Dealers

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 561422
SLED
Banking Customer Service Support ServicesThis subcontract for Banking Customer Service Support Services provides specialized customer service capabilities for prime contractors working on State University of New York Stony Brook banking projects. The scope of work includes managing university-specific banking inquiries, troubleshooting account issues, and maintaining service protocols through the use of secure communication portals and CRM software. The primary objective is to deliver ongoing support and enhance service capability metrics. Compliance is a critical component of the contract, requiring strict adherence to New York State Banking Laws and the completion of GLBA privacy training. Interested parties should note that the response deadline is December 8, 2026, and the project falls under NAICS code 561422.
Telemarketing Bureaus and Other Contact Centers

POSTED

8 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 339113
Closed
SLED
Hairnets and Personal Protective Equipment (PPE) Supply
Dougherty County Board of Education

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 339113
Closed
SLED
Buccal DNA Collection Swabs Supply
Department of Internal Services

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
Sterile Surgical Blades Supply (Precision #11 and General #22)
Department of Internal Services

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Awarded
SLED
15760P LABORATORY SUPPLIES-FORENSIC EVIDENCE COLLECTION-DNA
Solicitation # RFB-IS-26200750-1
Department of Internal Services

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
RFB-IS-26200797 - Tuttnauer Manual Autoclave Sterilizer, DAN - Closing: 4/22/2026 12:00 PM
Solicitation # 229126
Los Angeles County

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 339113
Closed
SLED
Hose Filter
Solicitation # Z4252
Nashville Electric Service

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
Custom Wheelchair
Solicitation # 2603-001
TRAVIS COUNTY HEALTHCARE DISTRICT

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
Optical Lens Coating Services (Parylene)
Department of Adult Correction

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 339113
Closed
SLED
Gloves
Solicitation # Z4247
Nashville Electric Service

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
Safety Hard Hats
Solicitation # Z4231
Nashville Electric Service

POSTED

7 months ago

CLOSED

7 months ago
View Details
NAICS: 339113
Closed
SLED
Neurovascular Coils
Solicitation # 721-04-26-001
University Medical Center Of El Paso

POSTED

7 months ago

CLOSED

6 months ago
View Details
NAICS: 339113
Closed
SLED
IWQ 123498 ADA Pool Lifts
Solicitation # IWQ 123498
Gwinnett County Government

POSTED

7 months ago

CLOSED

7 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS