Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Protective Sleeving and Packaging for Precision Fasteners

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing protective packaging for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision and application of non-abrasive wraps or sleeves designed to protect the entire length of the shank and threads of precision-machined screws. The contractor is responsible for delivering protective sleeves applied to 445 units or providing bulk compliant packaging materials. All packaging and labeling must strictly adhere to MIL-STD-129 and MIL-STD-130N standards. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located in Cherry Point. Interested parties must respond by November 13, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

339993 - Fastener, Button, Needle, and Pin Manufacturing

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-008E.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, CLOSE TOLERAN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies protective packaging for prime contractors on DLA Weapons Support ASC projects. Provides and applies non-abrasive wraps or sleeves to protect the entire length of the shank and threads of precision-machined screws. Packaging and labeling must comply with MIL-STD-129 and MIL-STD-130N. Delivers protective sleeves applied to 445 units or bulk compliant packaging materials.

Similar Contracts

Same NAICS industry code

Supply of Headed Shoulder PinsThis subcontract involves the supply of two precision-machined headed shoulder pins for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The components must be manufactured or sourced in strict accordance with NSN 5315-01-698-2138 and its associated technical specifications. Production requires the use of precision machining equipment, such as CNC lathes, and additive manufacturing is strictly prohibited unless prior written authorization is granted. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026. Falling under NAICS code 339993, the contract specifies a place of performance in FPO 96692. Interested parties must ensure all delivered units meet the rigorous technical standards linked to the specified National Stock Number.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Tapered Pin Manufacturing and Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Grooved, Headed Pin Manufacturing (NSN 5315-00-992-6653)This subcontract opportunity is for the manufacture and supply of precision-engineered grooved and headed pins under NSN 5315-00-992-6653 to support DLA Weapons Support projects. The selected provider must be a qualified manufacturer capable of utilizing precision machining and forming equipment to meet strict technical specifications. All deliverables must comply with domestic origin mandates as well as specific preservation, packaging, and marking requirements. Managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, this procurement is designated as a Total Small Business Set-Aside under NAICS code 339993. Interested parties must submit their responses by November 20, 2026. The contract focuses on the delivery of physical components identified by part number to prime contractors.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Supply of Turnlock Fastener Studs (NSN 5325-00-599-4889)This subcontract involves the procurement or manufacture of 42 turnlock fastener studs for prime contractors supporting DLA Weapons Support ASC projects. The required components must strictly adhere to Monadnock Company Part Number 295922-2-190 and NSN 5325-00-599-4889. All deliverables must be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor is required to comply with specific regulatory and quality standards, including the Buy American Act and prohibitions regarding hexavalent chromium. Additionally, all items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This requirement falls under NAICS code 339993 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Supply of Grooved Headless PinsThis subcontract involves the manufacture or sourcing of 24 grooved headless pins for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The hardware must be produced according to NSN 015984588 and FSC 5315 using precision machining or casting equipment to ensure all government technical specifications are met. The contractor is required to provide Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. Performance for this contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 339993.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

PIN, GROOVED, HEADED

Solicitation # SPE4A6-27-R-X197

This contract, solicitation SPE4A6-27-R-X197, is for the procurement of 6,560 grooved, headed pins, identified as critical application items. The requirement is issued by the DLA Weapons Support ASC Commodities Division as a firm fixed price Indefinite Delivery Purchase Order with a base period of five years and a maximum dollar value of 350,000.00. Deliveries are required within 186 days after order, with inspection and acceptance occurring at the origin. The procurement includes a requirement for a Contractor First Article Test and mandates adherence to specific Technical Data Packages and drawings, including Drawing 8448502 and Drawing 12579607. The contractor must comply with strict quality and safety standards, including a prohibition on the intentional use of mercury or mercury compounds in hardware, packaging, and marking. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific preservation requirements utilizing MIL-DTL-117, Type III, Class B. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and a CMMC Level 2 Self-Assessment must be uploaded to the SPRS to be eligible for award. Administrative processing and invoicing must be conducted through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

PIN, GROOVED, HEADED

Solicitation # SPE4A6-27-R-X205

Solicitation SPE4A6-27-R-X205 is a fixed-price, indefinite-quantity contract issued by the DLA Weapons Support ASC Commodities Division for the procurement of 5,445 grooved, headed pins (NSN 5315-00-992-6653). The contract has a maximum dollar value of $350,000.00 and a base period of five years. Delivery is required within 385 days after contract expiration, with inspection and acceptance occurring at the source. The procurement is a total small business set-aside, and the government will award based on best value, weighing past performance, specifically SPRS assessments, more heavily than quoted delivery. The contract mandates strict adherence to export control regulations under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed technical data training. Technical requirements include physical identification and bare item marking, with specific packaging and preservation standards following MIL-STD-2073-1 and MIL-STD-129. Additionally, the contractor must comply with CMMC Level 2 cybersecurity standards and DFARS 252.204-7012 for safeguarding covered defense information. First Article Testing is required, and all invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Guardrail Fastener and Hardware SupplyThe Guardrail Fastener and Hardware Supply subcontract, managed by New Hampshire Das Purchasing, involves the manufacture and delivery of specialized hardware for road safety projects. The scope of work requires the provision of 5/8 inch diameter splice bolts, post bolts in 10 and 18 inch lengths, and hex nuts, all of which must adhere to NHDOT General Specifications. To ensure quality and regulatory compliance, the supplier must provide certified test results, certificates of compliance, and Material Safety Data Sheets in accordance with the Worker's Right to Know Act. This procurement opportunity was posted on November 6, 2026, with a response deadline set for December 2, 2026.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 5 hours ago

DEADLINE

Shoulder Screw SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div, involves the supply of one high-precision shoulder screw, part number 5305-00-914-4172. The contractor is responsible for the design, fabrication, assembly, packaging, and testing of this component, which is designated as a Critical Application Item. All work must strictly adhere to TDP Rev B Gen 3 and NASM51975 Revision 6 standards to meet the requirements of prime contractors on government procurement projects. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 339993. The solicitation was posted on November 5, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing and Supply of Straight Headed Pins (NSN 5315010311092)This subcontract involves the manufacturing and supply of seven specialized straight headed pins, identified by NSN 5315010311092, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Supplier OE and AF Division. The items must be produced in strict accordance with TDP Rev A Gen 1 and Drawing NR 73030 69725 Rev AH, with bare item marking performed per RQ017 and RQ032 standards. All delivered pins must be fully marked, packaged, and inspected. The contractor is required to maintain quality systems compliant with either SAE AS9003 or ISO 9001 and must adhere to the Berry Amendment and Buy American Act. Performance for this contract is centered at Tinker AFB. Interested parties must respond by November 13, 2026, regarding this requirement categorized under NAICS code 339993.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Manufacture of Retaining Rings (NSN 5325-00-209-8231)This subcontract involves the precision manufacture of 1,149 retaining rings under NSN 5325-00-209-8231 for the Department of Defense DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to ASME Y14.5 for dimensional accuracy and ASME B46.1 for surface texture, with part marking conducted according to MIL-STD-130 and SAE AS478 standards. To be eligible, the contractor must maintain JCP certification and CMMC Level 2 compliance. Once the rings are finished and inspected, they are to be delivered to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Turnlock Fastener StudsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 264 industrial turnlock fastener studs. The required components must match NSN 5325010874531 and Southco part numbers 1215-41300Z3C or 121J-4130-Z3C. All deliverables must strictly adhere to RP001 packaging requirements and RQ011 identification standards to ensure compliance with prime contractor specifications. The contract falls under NAICS code 339993 and specifies Tinker AFB as the place of performance. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and Supply

Spring (Heavy Gauge) Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325013106732)This subcontract involves the manufacture or procurement of retaining rings for prime contractors supporting DLA supply contracts. The specific requirements call for rings matching part number 2144-0088 and national stock number 5325013106732, with a delivery quantity of one unit shipped FOB Destination. The contractor must ensure strict adherence to military and safety standards, including marking per MIL-STD-129 and packaging according to RP001 and MIL-STD-2073-1E using JA wrap material. Additionally, all hazardous material labeling must comply with 29 CFR 1910.1200. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Tapping Screw Procurement (NSN 5305-00-998-3248)This subcontract involves the procurement of 17 tapping screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing screws that strictly adhere to NSN 5305009983248 and the DLA Master List of Technical and Quality Requirements. Performance will take place at Davis Monthan AFB, with all items required to be packaged according to MIL-STD-129 and ASTM D3951 and palletized per RP001. The contractor must maintain compliance with Buy American regulations and DFARS 252.204-7012 cybersecurity standards. Final delivery requires the submission of invoices and receiving reports through the Wide Area WorkFlow system. This requirement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Steel Stock Supply for Fastener ProductionThis subcontract involves the supply of raw steel stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified steel sheet or coil that adheres to the specific metallurgical and hardness standards outlined in MS27151C. To ensure quality and compliance, the provider must submit Material Test Reports certifying the origin and composition of the steel and must strictly comply with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Barstow, California. This procurement falls under NAICS code 332999 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

Cadmium Plating for Steel FastenersThis subcontract involves providing specialized chemical plating services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the surface preparation and cadmium coating of stamped steel nuts in accordance with MS27151C standards. Utilizing electroplating tanks and chemical baths, the contractor is responsible for applying the coating and verifying both adhesion and plating thickness to ensure quality compliance. The project is based in Barstow, California, and falls under NAICS code 332813. Due to the nature of the materials used, the contractor must maintain all necessary environmental permits for the handling of cadmium. The final deliverable for this engagement is the provision of fully processed cadmium-plated steel nuts.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 2 hours ago

DEADLINE

Stamped Steel Nut Fabrication (Unplated)This subcontract involves the fabrication of unplated stamped steel nuts for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the use of industrial stamping presses and custom dies to form steel stock into nut geometry in strict accordance with MS27151C Revision C. Quality assurance is a critical component of the contract, requiring the execution of zero-based sampling plans per MIL-STD-1916 or ASQ H1331 to ensure all delivered components meet precise dimensional specifications. The performance of this contract is centered in Barstow, California, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Specialized Alloy/Steel Supply for FastenersThis subcontract involves the supply of specialized alloy and steel raw metal stock, including bars, wire, or billets, to support prime contractors working on projects for the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to metallurgical and hardness specifications for NSN 5305-00-616-2095 and comply with the DLA Master List of Technical and Quality Requirements. To verify material purity and grade, the supplier is required to furnish Material Test Reports or Certificates of Conformance and manage the delivery of the stock directly to the manufacturer. The project is categorized under NAICS code 331110 and is performed in Corpus Christi, Texas. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 2 hours ago

DEADLINE

Precision Setscrew Fabrication (NSN 5305-00-616-2095)This subcontract involves the fabrication of 155 setscrews for prime contractors supporting DLA Weapons Support ASC projects. All parts must be manufactured according to NSN 5305-00-616-2095 and the DLA Master List of Technical and Quality Requirements. The contract strictly mandates the use of traditional manufacturing processes, as additive manufacturing is explicitly prohibited. Finished and packaged components must undergo quality sampling in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with NIST SP 800-171 standards. The work is associated with NAICS code 332722 and will be performed in Corpus Christi, Texas. Interested parties must respond by November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Radio Frequency (RF) Cable Assembly SupplierThis subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division requires the supply of two radio frequency cable assemblies matching NSN 5995-01-217-1323. The supplier is responsible for manufacturing or sourcing these items for prime contractors supporting DLA Distribution supply contracts, with delivery terms set as FOB Origin and performance located in New Cumberland. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must ensure full compliance with DFARS 252.204-7016 concerning the prohibition of certain telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Machine Screws (NSN 5305015041494)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

Annular Ball Bearing Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the processing of 2,500 screws, ensuring all items are packaged according to MIL-STD-2073-1E and labeled in compliance with MIL-STD-129. The contractor must utilize MIL-SPEC preservation materials and industrial equipment to prepare the shipment for FOB Origin delivery to the DLA Distribution Depot at Hill Air Force Base, Utah. The project falls under NAICS code 488510 and is managed by the Department of Defense. Key deadlines include a posting date of November 6, 2026, with a response deadline set for November 13, 2026. All deliverables must meet strict military standards for preservation and shipping to ensure the integrity of the components during transit to the final destination.

Freight Transportation Arrangement

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS