Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PULLEY, GROOVE

Active
SPE4A6-26-T-08HYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits 33 units of a groove pulley with NSN/Part Number 3020-00-521-3500 under solicitation SPE4A6-26-T-08HY, with a delivery deadline 171 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for physical identification and bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Documentation for source approval, packaging in accordance with DLA standards, and removal of government identification from non-accepted supplies are mandatory. The technical data associated with this item is controlled under ITAR or EAR, restricting its export and disclosure to unauthorized foreign persons, even within the United States, and requires contractors to hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA authorization prior to accessing such data. The contract is governed by DFARS 252.225-7048 and applies to all parties including foreign subsidiaries. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is designated for New Cumberland, PA. The contracting office is the ASC Commodities Division under the Department of Defense, with Mollie Reddy listed as the primary point of contact.

General Info

33 groove pulleys, 171-day delivery, ITAR/EAR controlled, zero non-conformances, DLA standards, US/Canada certification required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Mollie Reddy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PULLEY,GROOVE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire
SPE4A6-26-T-08HY
SECTION B
(both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 3020-00-521-3500 Quantity: 33 EA Purchase Request: 7017572053QTY: 33 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
BEARING, BALL, ANNULARThis contract specifies the procurement of a ball annular bearing with part number 6203-2Z/C3 from SKF USA Inc., identified by NSN 3110-01-641-0113, for a quantity of 71 units. The bearing must be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of its components—rolling elements, retainer, inner race, and outer race—originating from these regions, per DFARS Clause 252.225-7016. Contractors are required to submit a completed declaration verifying domestic content, available via the DLA Foreign Bearing Waiver website; failure to provide this may disqualify the quote. The item is classified as a critical application and is subject to strict technical and quality requirements referenced in the DLA Master List. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, lighting, or sensors, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Packaging, preservation, and marking must strictly comply with MIL-STD-2073-1E and MIL-DTL-197M, including proper lubricant selection, preservation controls, and packaging facility quality assurance verification. Items must be marked according to MIL-STD-129, with no unit identification required per the service customer’s request and DFARS 252.211-7003(c)(1)(i). Delivery is FOB origin within 171 days, with no quantity variance allowed, and inspection and acceptance occur at destination. All documentation, technical compliance, and packaging must align with DLA standards, and the contract may be canceled if no compliant offers are received. The procurement is managed by the Defense Logistics Agency, with pricing at $71.00 per unit, totaling $5,041.00, and primary point of contact is Marion Williams.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
BOX, DOCUMENTThis contract, issued under solicitation SPE8EN-26-T-2635, specifies the procurement of 16 units of a boxed document storage item identified by NSN 2540015759648 and part number 182K0518-1 from HDT Expeditionary Systems Inc. The unit of issue is each (EA), with a fixed unit price of $16.00 and a total contract value of $256.00, with no variance allowed in quantity. Delivery is required within 56 days of award, with FOB origin terms and final delivery destination at the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging must conform strictly to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with hazardous materials subject to TQ requirement IP025 and non-hazardous items to ASTM D3951, though DLA Master List technical and quality requirements always supersede ASTM standards. The item must be palletized per RP001, and government identification must be removed from any non-accepted supplies as required by RQ011. Documentation must include compliance with the DLA Master List of Technical and Quality Requirements identified by R or I numbers, and source approval requests are governed by RC001. Covered defense information may apply, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The original required delivery date is March 30, 2027, with a needed ship date of September 29, 2026, and all terms are subject to the controlling revision of the DLA Master List as of the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
CLAMP, TOW BAR
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
COMPUTER, SPECIAL PU
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUI
LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
Federal
25--CLAMP,TOW BAR
DLA Land And Maritime

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
Federal
Re-Solicitation for SUPPORT KIT, AUXILIA NSN: 2541-01-676-0627The solicitation W912CH-24-R-0205 is for the procurement of the Support Kit, Auxilia, identified by NSN 2541-01-676-0627 and manufacturer part number 57K7284, under a Firm Fixed Price contract with a one-year option quantity, set aside for small business concerns. The contract requires strict compliance with military standards for packaging, preservation, and marking in accordance with MIL-STD-2073-1 and MIL-STD-129, including the application of Unique Item Identifiers and adherence to Level A packaging and Military preservation standards. The item will be delivered FOB destination to Anniston, AL, with a baseline delivery schedule starting 300 days after award or upon First Article Test approval, whichever is later, and a separate CLIN for First Article Test reporting due 330 days after award, with no alternative schedules permitted for this line item. Proposals must be submitted electronically via email to christina.a.herbig.civ@army.mil and amy.m.dombrowski.civ@army.mil by 3:00 PM EST on July 31, 2026, with a submission deadline extended from prior dates through successive amendments and valid for 120 days beyond submission. All proposals must conform to the Uniform Contract Format, be in English and US dollars, include current SAM certifications, and be submitted as a single, virus-free submission not exceeding 10 megabytes with proper subject line labeling. The solicitation incorporates extensive updates from the Revolutionary FAR Overhaul, including revised contract clauses such as FAR 52.209-1, FAR 52.210-1, FAR 52.211-5, FAR 52.215-2, FAR 52.215-23, FAR 52.219-6, FAR 52.219-8, FAR 52.219-14, FAR 52.219-28, FAR 52.219-33, FAR 52.222-19, FAR 52.222-20, FAR 52.222-35, FAR 52.222-36, FAR
W6QK Acc- Dta

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
Federal
25--BOX,DOCUMENT
DLA Troop Support

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336390
New
DIBBS
Supply of Engine Start Pulley (NSN 3020-01-566-6058)The contract pertains to the manufacture or sourcing of a military-specification Engine Start Pulley identified by NSN 3020-01-566-6058, a mechanical component critical for engine starting operations in military or industrial applications. The item is to be delivered to the Defense Logistics Agency under a subcontract arrangement, with performance tied to the Department of Defense’s requirements. The North American Industry Classification System code 336390 indicates the work falls under other transportation equipment manufacturing, signaling the specialized nature of the component and the need for precision engineering compliant with defense standards. The solicitation was posted on July 20, 2026, and awarded under contract number SPE7L026V0709, though no specific set-aside status or small business designation is indicated. Deliveries are intended for DLA’s logistics network without specified geographic restrictions for performance, suggesting flexibility in manufacturing location provided quality and spec compliance are maintained. The component must meet exact military specifications to ensure operational reliability in field conditions, and fulfillment of this contract supports the readiness and maintenance of defense systems reliant on this pulley for engine function.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336390
New
DIBBS
Supply of Steering Gear ComponentsThe contract entails the supply of steering gear components in quantities ranging from one to eighteen units, with delivery required within ninety days after receipt of the order. Pricing is subject to redetermination during any option years, indicating potential adjustments beyond the initial award period. The work falls under NAICS code 336390, which pertains to other transportation equipment manufacturing, and is structured as a subcontract under the Defense Logistics Agency, a branch of the Department of Defense. The solicitation was posted on July 20, 2026, and performance is expected to be conducted without a specified physical location, suggesting flexibility in where the components are delivered or installed. No set-aside provisions or point of contact details are provided, and the contract is accessible through the DIBBS portal under the award number SPE7LX26D0066.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336390
New
DIBBS
Supply of Vehicular Maintenance Kit (NSN: 4910016597085)The contract entails the procurement and delivery of three units of a military-spec vehicular maintenance kit, identified by NSN 4910016597085, to Fort Stewart, Georgia, with a strict delivery deadline of July 30, 2026. All items must fully comply with Defense Federal Acquisition Regulation Supplement and Defense Logistics Agency shipping standards to ensure proper handling, packaging, and documentation throughout the supply chain. The contract is categorized as a subcontract under NAICS code 336390, and the performing agency is the Defense Logistics Agency under the Department of Defense. Although specific point of contact and address details are not provided, the obligation is bound to federal procurement protocols with no set-aside provisions outlined. The delivery must be completed on time and in accordance with all applicable defense logistics requirements to meet operational readiness standards at the installation.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 336390
New
DIBBS
Supply of GE Engine Parts Kits to Sweiyan Air BaseThe contract entails the procurement and delivery of eight units of the PARTS KIT, ENGINE GE to Sweiyan Air Base in the United Arab Emirates, with full adherence to Defense Federal Acquisition Regulation Supplement requirements, Department of Defense shipping protocols, and stringent packaging and marking standards to ensure compliance and operational readiness. The items are part of a subcontract under the NAICS code 336390, managed by the Defense Logistics Agency on behalf of the Department of Defense, and must be delivered in accordance with all federal and military logistical guidelines without exception. The contract was posted on July 20, 2026, and is issued under the contract identification SPE7LX21D0007 with delivery order SPE7L126FAU9V, specifying the exact quantity and destination to support maintenance and sustainment operations at the designated air base. All materials are subject to rigorous quality control, traceability, and documentation requirements to meet defense supply chain integrity standards, and failure to comply with packaging, labeling, or delivery timelines may result in rejection or penalties.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.
Computer Systems Design Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.
Engineering Services

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.
Ball and Roller Bearing Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-286-0906, quantity of four units, under solicitation SPE4A6-26-T-08MV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Inspection and acceptance occur at origin using sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, or a zero-based plan; critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is designated as a critical application requiring casting or forging, with tooling typically held by the manufacturer, and sourcing assistance must be requested through DLA’s designated channels. Only approved sources are KAMATICS CORPORATION and ROLLER BEARING COMPANY OF AMERICA, each with specific part numbers. Item Unique Identification is not required per the Service customer’s request. Delivery is FOB origin with a 171-day lead time, final delivery due by April 20, 2027, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and palletization adhere strictly to DLA’s procurement standards, and all documentation must support source approval and manufacturing compliance.
Support Activities for Coal Mining

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
Other Electronic Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details