Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PULLEY, GROOVE

Active
SPE7M4-26-T-328RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 2,405 units of a grooved pulley identified by NSN 3020002771123 and part number MS20220-2, designated as a critical application item and classified as a commercial item. The product must comply with stringent technical and quality requirements outlined in MIL-DTL-7034/2B and MIL-DTL-7034F(2), with adherence to TDP Revision B General 2 and reference drawing 200415485. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards unless explicitly overridden by the contract. Sampling and inspection are strictly controlled under MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and all attributes are assigned predefined verification levels or AQLs. The item is subject to qualification under the Qualified Products List or Qualified Manufacturers List and must be packaged and labeled in compliance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements. Delivery is FOB origin with a 164-day lead time and must arrive by February 2, 2027, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the contract is awarded under a HUBZone Set-Aside with a primary point of contact at the Department of Defense’s Fluid Handling Division.

General Info

2,405 NSN 3020-00-277-1123 grooved pulleys, MIL-DTL-7034 compliant, HUBZone Set-Aside, FOB origin, Feb 2, 2027 delivery.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

HZC

Documents

(1)

SPE7M4-26-T-328R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PULLEY,GROOVE
PULLEY, GROOVE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
PROCURE MS20220-2 PER MIL-DTL-7034/2A AND QPL-7034-22 GENERAL
ENGINEERING NOTES 1,3 & 12 ON DOCUMENT 200415485 APPLY.
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC SPEC NR MIL-DTL-7034/2B REVISION NR B DTD 03/10/2022 PART PIECE NUMBER: MS20220-2
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 98752 200415485
SPE7M4-26-T-328R
SECTION B
REVISION NR E DTD 01/30/2020
PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MIL-DTL-7034F(2) NOT 3 REVISION NR F DTD 12/03/2025 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MIL-DTL-7034/1B REVISION NR B DTD 03/10/2022 PART PIECE NUMBER: MS20220-2
TDP Rev B Gen 2 IAW REFERENCE SPEC NR MS20220C NOT 2 REVISION NR C DTD 05/05/1998 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017780347 0001 EA 2,405.000
NSN/MATERIAL:3020002771123
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE7M4-26-T-328R
SECTION B
PR: 7017780347 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/02/2027 Original Required Delivery Date:12/24/2027
SPE7M4-26-T-328R NSN/Part Number: 3020-00-277-1123 Quantity: 2,405 EA Purchase Request: 7017780347QTY: 2405 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
BRACKET ASSY, CYLIND
Solicitation # SPE4A7-26-T-637H
The contract pertains to the procurement of a bracket assembly for a cylinder system, identified by part number 800579-01 and NSN 1680-00-465-9457, with a quantity of six units to be delivered FOB origin within 102 days. The item is classified as a critical application component, and all inspection and acceptance must occur at the manufacturer’s origin using a zero-defect sampling standard—either MIL-STD-1916 or ASQ H1331—with critical attributes requiring acceptance levels of AQL 0.1, major attributes at AQL 1.0, and minor at AQL 4.0. Unspecified attributes are treated as major unless otherwise stated in referenced documents, and only zero non-conformances are acceptable unless the contract specifies otherwise. Sampling methodology may use either attribute or variable inspection at the manufacturer’s discretion, and MIL-STD-105/ASQ Z1.4 may inform sample size but not acceptance criteria. Packaging must comply with ASTM D3951 while being subordinate to the DLA Master List of Technical and Quality Requirements, with labeling and unit packaging strictly adhering to MIL-STD-129 and palletization governed by DLA’s RP001. The item must bear physical identification per RQ017, and any non-accepted supplies must have government identification removed. Cybersystem compliance requires a CMMC Level 2 self-assessment, and all documentation is governed by the DLA Master List version in effect on the solicitation date. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with no variance allowed in quantity. The required ship date is November 29, 2026, while the original delivery deadline is November 4, 2027. The contract is issued under SPE4A7-26-T-637H, with procurement managed through a federal acquisition channel under NAICS code 336413 and point of contact Grayson Andrews of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PIN, DOOR VISOR
Solicitation # SPE4A7-26-T-637M
The item specified is a PIN, DOOR VISOR with NSN 1560-00-888-8169, requiring a quantity of four units for delivery within 557 days after order date. Manufacturing may involve casting or forging processes, and associated tooling is typically necessary—however, the government may not possess this tooling, necessitating direct contact with DLA via their Casting and Forging Assistance Request portal for sourcing support. The acquisition is governed by stringent quality requirements tailored to the item, with inspection and acceptance to occur at the manufacturer’s origin. Physical identification of the item is required, but Item Unique Identification is explicitly waived per the service customer’s request. Technical data associated with this item is subject to export control under either ITAR or EAR, and its disclosure to any foreign person—even within the United States—is restricted unless authorized by the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling export-controlled data, and formal DLA approval may access such technical data. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed. There is no shelf life requirement for this material. The solicitation, issued under SPE4A7-26-T-637M, was posted on August 10, 2026, with responses due by August 18, 2026, and performance is designated for Robins AFB, Georgia, with Eugene Wilkens listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PLATE, SCUFF, HYDRAUL
Solicitation # SPE4A7-26-R-XA11
The contract pertains to the procurement of a hydraulic scuff plate identified by NSN 1650-00-321-6288 and part number 86158-1, supplied by HYDRO-AIRE AEROSPACE CORP and CRANE COMPANY, under solicitation SPE4A7-26-R-XA11. It specifies a firm fixed price with zero variance in quantity, requiring delivery within 156 days after date of award. Inspection and acceptance occur at the origin, and packaging must comply with ASTM D3951 and MIL-STD-129, while palletization adheres to DLA Packaging Requirements for Procurement. All items must be marked and labeled per federal standards, and government identification must be removed from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract mandates compliance with CMMC Level 2 Cybersecurity Self-Assessment and includes stringent quality controls such as zero-defect sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Configuration changes require formal engineering change proposals, and measuring and test equipment must meet specified standards. Documentation for source approval is required, and the item is designated as a critical application item. The unit of issue is one each, shipped to a government-designated destination under FOB destination terms, with freight and transportation instructions referencing DLAD procedural notes. All data marked as restricted proprietary information is protected under the contract, and point of contact for inquiries is Michael Kershaw of the Department of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-R-0688
The contract pertains to the procurement of an aircraft skin part designated by NSN 1560-011519541 and part number 65-55125-1, manufactured in accordance with drawing 81205 65-55125 Revision C dated November 4, 1988. This is an indefinite quantity contract with a five-year base period and no option periods, under a total small business set-aside, with an estimated annual requirement of 40 units. Deliveries are required to be completed within 300 days after order placement, with FOB origin terms and inspection and acceptance also conducted at the origin. Access to technical data associated with this item is restricted to contractors certified by the Department of Defense under DOD 5220.22M, requiring submission of DD Form 2345 to the Defense Logistics Information Services. The solicitation, numbered SPE4A726R0688, will be issued on or about August 10, 2026, and is only available electronically via the DLA Internet Bid Board System; no paper copies will be provided. Proposals must be submitted by September 10, 2026, and all correspondence should be directed to Ryan Loeffelholz at the Department of Defense, Defense Logistics Agency Aviation, located in Richmond, Virginia.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
AXLE, LANDING GEAR
Solicitation # SPE4A5-26-T-338H
Offerors bidding on this solicitation must comply with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with a lowered threshold of $150,000, and must disclose any non-domestic materials used in their proposal. The use of covered telecommunications equipment or services is prohibited under FAR and DFARS clauses, and all offers must affirm they will not supply such items. Small business joint ventures must submit specific representations for eligibility categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Vendors must provide quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for flexible adjustments without resolicitation, though this does not apply to Auto IDC. Submission of a “No Bid” on DIBBS is strongly encouraged for those anticipating delayed or non-participation to avoid assumptions of non-responsiveness. All contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA; VSM WebServices users must also update their internal schema to avoid disruption. Additive manufacturing is prohibited unless specifically approved, and any proposal including AM-produced items will be disqualified. The solicitation pertains to an AXLE, LANDING GEAR with NSN 1620-01-158-5930, quantity of 40 units, delivery required within 202 days ADO, and response is due by August 18, 2026. Fast Pay is not applicable, and APEX Accelerators are available at no cost to assist businesses with government contracting support.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHAFT, BLOCK AND PIS
Solicitation # SPE7M4-26-T-329F
The contract pertains to the procurement of a Shaft, Block and Piston Assembly, identified by part number 622308 and NSN 1650-01-237-4425, with a quantity of five units. Delivery is required within 164 days from contract award, with shipment FOB origin and inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill in Hill AFB, Utah. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129, with no special marking required. Palletization is governed by DLA packaging requirements, and all units must be prepared using prescribed methods including preservative treatments, wrapping material, and container standards. The contract stipulates that all technical and quality requirements are derived from the DLA Master List of Technical and Quality Requirements, with tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Sampling and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels or AQLs as specified. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Compliance with cybersecurity protocols is mandated through a CMMC Level 2 self-assessment, and although Item Unique Identification is not required per customer request, the contract remains subject to all applicable DFARS provisions. The contract is categorized as a simplified acquisition, and any changes to technical or quality stipulations must be controlled based on the revision of the DLA Master List in effect on the solicitation issue date. The unit of issue is each (EA), with a total price of $5.00 per unit, and no variance in quantity is permitted. The delivery schedule is rigid, with the original required delivery date set for September 3, 2028, and a need ship date of February 2, 2027. The solicitation was issued on August 10, 2026, with a response deadline of August 21, 2026, under NAICS code 336413 for aircraft and aircraft parts manufacturing, and is managed by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
Federal
HOUSING INDICATOR_End_Item_B0052_NSN_6680011726958RK_PN_10006-1002-01
Solicitation # FD20302700198
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of the Housing Indicator part number 10006-1002-01 with NSN 6680-01-172-6958RK for use on platform B0052. This effort, initiated under Notice ID FD20302700198, is a Sources Sought synopsis intended solely for market research and not a solicitation or invitation to bid. No contract will be awarded based on responses, and no funds are currently available. The government seeks information from all types of businesses including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses to determine whether the requirement can be competitively sourced or set aside for small businesses. The estimated requirement is 60 units, and potential vendors must demonstrate capability to handle new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing long-lead items and diminishing manufacturing sources. Nonrecurring engineering costs to qualify as an approved source may also be required. Responses are due by August 17, 2026, Central Standard Time, and must be submitted via the designated workflow email address 422.scms.afmc.rfi@us.af.mil. Participation requires selecting the “Add Me to Interested Vendors” button on the posting; requests for a solicitation will not be answered. The North American Industry Classification System code is 336413 with a size standard of 1,250 employees, and the federal stock class is 6680. The place of performance is Tinker Air Force Base, Oklahoma. This is explicitly a new spares procurement with no repair component, and the government intends to use the gathered information solely to shape the future acquisition strategy, including the possibility of breaking the requirement down by airframe.
Ok DLA Aviation At Oklahoma City

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
VAVLE,HOT SIDE TEM
Solicitation # SPRPA126QWB56
This contract solicitation, issued under EAF Emergency Acquisition Flexibilities, seeks to procure VAVLE, HOT SIDE TEM equipment with a critical application designation, meaning failure could result in mission failure or safety risks. The solicitation number is SPRPA126QWB56, posted on August 10, 2026, with a response deadline of August 24, 2026, and is governed under NAICS code 336413. Offers must originate exclusively from government-approved sources of supply; distributors must submit an authorized distributor letter on the source’s official letterhead at the time of proposal submission. Failure to comply will render offers technically unacceptable. The contract mandates adherence to multiple federal clauses including Buy American requirements, Equal Opportunity for Veterans and Workers with Disabilities, Security Prohibitions, and the mandatory use of Workflow Pro’s Assist Module. Invoices and receiving reports must follow the specified combo format, and the Navy’s use of AbilityOne contractors is referenced. The contract also includes obligations related to royalty information, priority ratings for national defense, and reporting on recovered material content per EPA guidelines. The point of contact for inquiries is Joseph Gambino, reachable via email and phone through the Department of Defense’s DLA Aviation office in Philadelphia, Pennsylvania.
Pa DLA Aviation At Philadelphia

POSTED

about 6 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
Motor, Hydraulic
Solicitation # SPRTA1-26-R-0395
The contract pertains to the procurement of hydraulic motors with NSN 1650-01-481-8040HS and part number 693427, intended for use on the B-1 aircraft. The requirement is for 15 units, with a minimum order of four and a maximum of twenty-three, to be delivered on or before April 20, 2028, and shipped to location SW3210 under TAC code FRS2. The item is a spares replacement, and the only qualified source identified is Eaton Aerospace, LLC., with CAGE code 62983. The requirement is justified under FAR 6.302 due to limited sources capable of supplying this specific military-grade component, and no competition is anticipated at this stage, though responses received within 45 days of the synopsis will be considered for potential competitive determination. The Government does not own manufacturing data rights and advises potential offerors to contact the OEM directly for access to technical data. All proposals must be submitted electronically via SAM.gov, as hard copies are not accepted. UID requirements will be enforced, and while export control restrictions do not apply, foreign-owned firms must consult with the contracting officer prior to submitting proposals due to potential eligibility limitations. The contract is dependent on the availability of appropriated funds, with no legal obligation arising until funds are formally made available and confirmed in writing. The acquisition is not set aside for small businesses or other socioeconomic categories, and surplus is not authorized. Price and past performance will jointly influence the award decision. A designated Ombudsman is available to address concerns from potential offerors during the proposal phase, with confidentiality guaranteed. Questions should be directed to Howard Heflin at howard.heflin@us.af.mil. The solicitation will be issued following the posting date of August 10, 2026, with responses due by August 25, 2026, and the anticipated award date approximately 90 days after the notice.
Ok DLA Aviation At Oklahoma City

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
Federal
2-for-1 Heatsink Remanufacturing
Solicitation # SPRHA1-26-R-9241
The U.S. Department of Defense, through DLA Aviation at Hill Air Force Base, is seeking industry input on a potential long-term contract for the remanufacturing of carbon heatsink assemblies used on F-16, F-15, C-130, and C-5 aircraft under a 2-for-1 model, which aims to reuse condemned parts to improve supply chain efficiency and reduce costs. These heatsinks are mission-critical components integrated into aircraft brake systems and are manufactured to exact, platform-specific dimensional and material standards that limit interchangeability with commercial or non-original components. The government currently lacks unrestricted technical data rights and cannot reverse engineer the parts economically, leaving Collins Aerospace as the sole source supplier, which creates dependency and supply chain vulnerability. The goal of this request is to identify capable contractors who can establish a reliable, performance-based logistics framework to ensure continuous availability of remanufactured parts, improve warfighter readiness, reduce inventory costs, and decrease condemnation rates through enhanced reliability and quality control. Responses are requested from U.S.-based businesses capable of sourcing, remanufacturing, and testing these specialized components, with a strong emphasis on proven experience in aerospace supply chain management, existing qualifications from relevant aviation suppliers, and compliance with stringent aerospace quality standards such as AS9100 and NADCAP. The solicitation requires detailed information on technical access, test and warehousing capabilities, workforce capacity, transition timelines, and QA processes, along with certification status in SAM and WAWF. Foreign participation is prohibited at the prime level, all submissions must be in English and U.S. dollars, and while the government does not intend to pay for responses or commit to a contract based on this effort, the collected information will directly inform future acquisition strategies. Proposals must be submitted via email by the deadline, and no obligation is created for the government by receiving or using the data provided.
Ut DLA Aviation At Ogden

POSTED

about 6 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Support Assy and Shim
Solicitation # 70Z03826QJ0000157
The United States Coast Guard’s Aviation Logistics Center intends to award a sole source Basic Ordering Agreement to Sikorsky Aircraft Corporation, the Original Equipment Manufacturer, under CAE Code 78286, for the procurement of two specific aviation components: a Support Assembly (NSN 1560-01-HS2-2867, Part Number 70307-82010-041) in a quantity of 48 units, and a Shim (NSN 5365-01-343-9769, Part Number 70305-22117-101) in a quantity of 16 units. This action is classified under NAICS Code 336413 with a small business size standard of 1,250 employees, but the requirement is unrestricted as the small business set-aside has been dissolved. The procurement is justified under FAR 12.102(a) due to the items being available from only one source, and no formal solicitation package will be issued. Interested parties may submit quotations via email to Julie.G.Lininger@uscg.mil and mrr-procurement@uscg.mil with the solicitation number 70Z03826QJ0000157 in the subject line, with the final response deadline extended to July 29, 2026, at 2:00 PM EDT. Award will be based solely on the determination of fair and reasonable pricing, and the Government retains full discretion on whether to proceed with a sole source award. Delivery is required within 200 days after receipt of order, with a requested delivery date of March 1, 2027, for both items, and early shipments are encouraged at no additional cost to the Government. The F.O.B. point is origin, with quotes defaulting to F.O.B. Destination unless F.O.B. Origin is explicitly stated and shipping costs are included. Inspection and acceptance will be conducted at origin by the Defense Contract Management Agency. Offerors must maintain an active SAM registration, though certain representations required by SAM, including those under 52.212-3(d), 52.212-5 paragraphs (e)(1)(ii)(I), (e)(1)(ii)(J), (b)(33), (b)(
Aviation Logistics Center (ALC)(00038)

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
TEMPERATURE INDICATOR_End_Item_B001B_NSN_6685011829329_PN_8DJ219WCH1
Solicitation # FD20302700195
The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a Temperature Indicator, identified by NSN 6685-01-182-9329 and Part Number 8DJ219WCH1, designated for use on the B001B platform. This is not a solicitation or a binding contract opportunity, and no funds are available at this time; the intent is purely to assess industrial capability and determine whether the requirement can be met through competitive sourcing or as a small business set-aside. The government is seeking responses from all eligible business categories, including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, with a focus on vendors capable of full new production, including component procurement, inspection, testing, preservation, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages. The estimated requirement is for 22 units, and the effort includes consideration of nonrecurring engineering costs for qualification as an approved source. Respondents must register via the "Add Me to Interested Vendors" button, with responses due by August 17, 2026, Central Standard Time. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the place of performance is Tinker AFB, OK. All inquiries and submissions must be directed to the designated DLA Aviation email, and no engineering drawings are being requested through this market research effort.
Ok DLA Aviation At Oklahoma City

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED TU
Solicitation # SPE7M3-26-T-8152
This contract specifies the procurement of conical flared tube seals, identified by part number AS4824A16 and NSN 4730-01-538-3942, manufactured in accordance with SAE AS4824B (R2015) Revision B dated 11/01/2007. Each package contains two seals and is designated as one package (1 PG = 2 EA), with a total quantity of 453 packages required. The item is classified as a critical application and must not contain any ozone-depleting chemicals; substitutes require prior approval unless explicitly authorized by the specification. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific instructions to keep seals enclosed in protective plastic vials during shipping to prevent damage. Marking must follow standard government protocols, with no additional special coding required. The contract mandates delivery within 88 days from the requirement date, with FOB origin terms, inspection and acceptance occurring at origin, and no variance allowed in quantity. The delivery address is DLA Distribution in Corpus Christi, Texas, with a need ship date of August 6, 2026, and an original required delivery date of March 12, 2027. The contract is subject to full and open competition, and the Certificate of Conformance procedure is authorized unless overridden by a quality assurance instruction. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision levels determined by the solicitation or award date. Transportation and shipping logistics must adhere to DLA Procurement Notes C19 and C20, and all unit of issue data aligns with DoD and ANSI X12 standards.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
ORIFICE PLATE ASSEMBLY
Solicitation # SPE7M4-26-T-328Q
The contract specifies the procurement of an orifice plate assembly with part number 5712-2PC and NSN 4820-00-911-1545, for a quantity of 157 units, under solicitation SPE7M4-26-T-328Q. Delivery is required within 164 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging materials, and the U pack code. The item is classified as a critical application item with a non-extendable shelf life of 120 months and is subject to DLA’s packaging and quality requirements as defined in their master list of technical and quality standards. Mercury and mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have a secondary containment as per NAVSEA 5100-003D. A Certificate of Quality Compliance is mandatory, and removal of government identification from non-accepted supplies is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 2, 2027, with an original delivery due date of December 17, 2026. Unit of issue is each, priced at $157.00 per unit, totaling $24,649.00.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M4-26-T-328T
The contract is for the procurement of a fluid filter element with the NSN 2940-00-741-1081 and part numbers specific to approved vendors including Wheeler Fleet Solutions, Met-Pro Corporation, and Haldex Brake Products Corporation. A total quantity of 234 units is required, each unit priced at $234.00, resulting in a total contract value of $54,756. Delivery is mandated within 24 days from the order placement, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The filter element is designated as a critical application item, and strict compliance is required with DLA packaging standards, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking codes applicable. Packaging must adhere to DLA’s RP001 requirements and be palletized accordingly. Mercury or mercury-containing compounds are prohibited in or in direct contact with the filter element except under specific exceptions for functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or Navsea-specified reagents, with portable devices containing mercury required to be shockproof and have a secondary containment boundary consistent with NAVSEA 5100-003D. All supplies must be delivered to the DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7M4-26-T-328T, issued under NAICS code 336390 by the Department of Defense’s Fluid Handling Division, with a response deadline of August 21, 2026, and a required ship date of September 15, 2026, despite an original delivery date of February 3, 2027. The contract enforces full alignment with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the applicable revision is controlled by the solicitation issue date.
Other Motor Vehicle Parts Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
SWIVEL JOINT, HYDRAULIC
Solicitation # SPE7M3-26-T-8155
A hydraulic swivel joint made of steel with a zinc plating and dichromate finish, or alternatively a clear trivalent chromate finish, is being procured under a total small business set-aside solicitation. The part features 3/4-16 37-degree SAE flare connections on both ends and measures 3.06 inches overall in length, with a specific part number assigned by Grove U.S. LLC and Oshkosh Defense LLC as approved sources. This is a critical application item requiring government engineering source approval and is subject to stringent technical and quality requirements referenced from the DLA Master List. The item is identified by NSN 4730-01-199-4583 and must be delivered in full compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract calls for 303 units to be delivered FOB origin within 163 days, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The delivery is scheduled for February 1, 2027, with an original required delivery date of February 2, 2027, under solicitation SPE7M3-26-T-8155, and the unit price is $303.00 per each, totaling a contract value of $91,809.00.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-8157
The contract is for 280 units of a 3/8 inch quick disconnect coupling half, specified by NSN 4730-01-412-5272 and referenced to a technical drawing titled "COUPLING HALF, QUICK DISCONNECT." All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Export control restrictions apply to technical data associated with this item under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including those within the United States. Access to this controlled data is restricted to DLA contractors with active US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority. The solicitation, issued under number SPE7M3-26-T-8157 on August 10, 2026, with a response deadline of August 21, 2026, is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with a delivery window of 105 days after award. The primary point of contact is William Cain from the Fluid Handling Division, Department of Defense, reachable via email and phone. The procurement is managed through the DLA’s electronic procurement portal, and all contractors must comply with DFARS 252.225-7048 regarding export control of technical data.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333612
New
DIBBS
COUPLING, SHAFT, RIGI
Solicitation # SPE7M4-26-T-329C
The contract pertains to the procurement of a rigid shaft coupling, part number 317090, manufactured by Eaton Aerospace LLC with CAGE code 62983, under solicitation SPE7M4-26-T-329C. A total of 30 units are required at a unit price of $30.00, with delivery scheduled for 164 days after award, FOB origin, and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent defense procurement standards, including the DLA Master List of Technical and Quality Requirements, which supersede all other specifications. Compliance with MIL-STD-129 for marking and packaging is mandatory, and packaging must align with ASTM D3951 unless overridden by DLA requirements. Palletization must follow RP001 guidelines, and sampling protocols require zero non-conformances under MIL-STD-1916 or equivalent zero-based plans, with verification levels assigned based on attribute criticality. The supplier must hold a CMMC Level 2 self-assessment certification and handle Covered Defense Information as defined by RD002. Delivery is to be made to DLA Distribution Depot Hill at Hill AFB, Utah, with a required ship date of February 2, 2027, and an original delivery deadline of September 12, 2027. No quantity variance is permitted, and all packaging and labeling must strictly adhere to contract-specified unit of issue and quantity per unit pack.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-328Y
The contract specifies the procurement of seamless metallic tubing made from corrosion-resistant steel with a composition of 321, featuring an outer diameter of 0.500 inches and a wall thickness of 0.028 inches, delivered in random lengths between 8 and 16 feet. The tubing must comply with the MIL-T-8606C(2) specification and meet the technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including the applicable QAP 13873. The item is classified as a commercial item and a critical application item, requiring full and open competition. All materials must adhere to strict manufacturing and inspection standards, including compliance with MIL-STD-1916 or ASQ Z1.331 for sampling, with zero non-conformances required unless otherwise specified, and must be verified through a Certificate of Quality Compliance as mandated by contract clause 52.246-9000. Metal certification documentation is required and must be submitted as per CDRL-METALSCERT. Packaging and delivery must follow MIL-STD-2073-1E and RP001 DLA Packaging Requirements, with preservation performed in accordance with MIL-S-163 using Type B or C preservatives as applicable. Each master lift is limited to 2000 pounds gross weight, and packaging must not include Class I ozone-depleting chemicals. Marking is required per MIL-STD-129 with no special marking codes. The delivery point is FOB origin with inspection and acceptance also occurring at origin, and the quantity of 1,207 linear feet may vary by plus or minus 10%. The required delivery date is January 12, 2027, with a need ship date of February 2, 2027, and full delivery must be completed within 164 days. The item is identified by NSN 4710-00-540-6722 and purchase request 7017779049, with final delivery directed to DLA Distribution at Robins Air Force Base, Georgia. All documentation and compliance are subject to the latest revisions of referenced standards effective on the solicitation or award date, as applicable.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7M4-26-T-328M
The contract specifies the procurement of a synthetic rubber gasket with an outside diameter of 5.063 inches, an inside diameter of 1.875 inches, and a thickness of 0.125 inches, classified as a critical item requiring source inspection and compliance with stringent technical and quality standards. The item is defined by a military or consensus non-government standard, and all units manufactured after the solicitation date must conform to the current revision of that standard, with past revisions accepted only for previously manufactured hardware. The gasket must be free of asbestos as defined in Fed-Std-313 and must not contain intentional mercury or mercury compounds except in specific exempted applications such as batteries or instrument sensors, with additional containment requirements for portable devices. It carries a non-extendable 36-month shelf life under Type I Code Q requirements, and each unit must be permanently marked every three feet with the specification number, revision, type, class, and cure or manufacture date in accordance with MIL-STD-190, including approved colors and environmental resistance. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 to protect against UV degradation. Palletization follows DLA packaging requirements, and all markings must include the special code 32 indicating Type I shelf life. The item is subject to inspection and acceptance at destination, with a delivery window of 87 days from the contract award and a required delivery date of December 31, 2026. The contractor must certify material compliance, understand bare item marking requirements, and deliver 215 units FOB origin under a firm fixed price of $215.00 each, totaling $46,225.00. The delivery address is the DLA Distribution New Cumberland Facility, and transportation logistics must adhere to DLAD Procurement Notes C19 and C20. The solicitation number is SPE7M4-26-T-328M, with a response deadline of August 21, 2026, and the item falls under Federal Supply Class 5330 with NSN 5330-01-126-8850.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNE
Solicitation # SPE7M3-26-T-8158
This contract pertains to a commercial quick disconnect plug identified by part number 155-39-12D, manufactured by SATAIR A/S and also available from Eaton Aeroquip LLC and Jaidinger Mfg Co Inc, designed for use on F/A-18 Hornet and S-3A Viking aircraft. The item is constructed from aluminum alloy with an external thread and includes a chain, and it is classified as a critical application item with destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and marking must adhere to MIL-STD-129 with special marking code 24 indicating open inspection or use. Packaging is subject to DLA’s Reduced Plastic Packaging Initiative, requiring minimal plastic use without compromising protection. The item is procured under solicitation SPE7M3-26-T-8158, a Women-Owned Small Business Set-Aside, with a required delivery of 312 units within 125 days of award, delivered FOB origin. The NSN is 4730-01-394-3297, and the unit of issue is each. Delivery must be made to DLA Distribution Jacksonville at the specified address, with freight details governed by DLA procedures C19 and C20. The original required delivery date is January 4, 2027, with a need ship date of December 25, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and pricing is set at $312.00 per unit for a total contract value of $97,344.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-328S
This contract pertains to the procurement of a nonmetallic hose assembly identified by NSN 4720-01-482-7562, with a requirement for eight units to be delivered within 101 days to the designated receiving warehouse in Tracy, California. The product must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, specifically incorporating technical identifiers R and I, and adhere strictly to DLA packaging guidelines as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking and packaging. The hose assembly is governed by SAE AS117K and SAE AS1339K standards and is listed on a Qualified Products List or Qualified Manufacturers List, requiring sourcing only from qualified suppliers. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the referenced specifications. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans with zero non-conformances required unless otherwise stated, and attributes are evaluated using defined verification levels or AQLs. The item is designated as a critical application component, and delivery is FOB origin with no variance allowed in quantity. The contract mandates adherence to DLA freight and transportation procedures, with a firm delivery deadline of April 23, 2027, though an earlier ship date of December 1, 2026, is requested. No shelf life restrictions apply to this material.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER ASSY
Solicitation # SPE7M4-26-T-329D
The retainer assembly, identified by NSN 5330-00-525-6138 and quantity of 126 units, is solicited under contract SPE7M4-26-T-329D with a response deadline of August 21, 2026, and a required delivery date 95 days after award. This item is classified as a commercial item and strictly prohibits the use of asbestos as defined in FED-STD-313. All technical and quality requirements applicable to this procurement are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Government identification must be removed from non-accepted supplies in accordance with RQ011. The procurement is administered by the Department of Defense’s Fluid Handling Division, with performance located at Tinker AFB, Oklahoma, and primary point of contact Rory O’Reilly at dla.mil. The NAICS code 339991 applies, and the solicitation is issued through the DLA eProcurement portal.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8154
The contract is for 147 hundred-unit lots of a spring-type hose clamp, nominal effective size of 1-3/8 inches, identified by NSN 4730-00-585-8582 and part number AA52506-E-22, with full and open competition required. The item must comply with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all manufacturing and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specific exemptions such as functional uses in batteries, fluorescent lights, sensors, or instrumentations approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and replacements require prior approval unless explicitly authorized. The clamp must conform to SAE J1508-2009 and the DLA-approved specification revision E dated 03/31/2023, with configuration changes requiring formal engineering change proposals or variance requests. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with the U pack code and no special marking, and palletization must meet DLA procurement requirements. The unit of issue is an HD of 100 units, with delivery due 101 days after award, FOB origin, inspection and acceptance at destination. The full shipment must be delivered to the DDSP New Cumberland Facility in Pennsylvania with a required ship date of December 1, 2026, and an original delivery deadline of December 12, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details