Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pulper System Fabrication (Large & Small)

Active

Federal

Response Deadline11/12/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the fabrication and testing of Mod I Large and Small Pulper systems for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The selected provider is responsible for manufacturing these systems in strict accordance with NAVSEA drawings and conducting all necessary testing based on specified interface drawings to ensure full operational functionality before delivery. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001:2015 and NIST SP-800-171 compliance. Performance will take place in Philadelphia, with the primary objective being the delivery of completed and verified Pulper systems that meet all technical and security standards.

General Info

Fabricate and test Mod I Pulper systems for NSWC Philadelphia per NAVSEA standards.

Agency

Department Of Defense → Nswc Philadelphia Division

NAICS

333999 - All Other Miscellaneous General Purpose Machinery Manufacturing

Place of Performance

Philadelphia, PA, 19112, USA

Set-Aside

NONE

Documents

This scope was carved out of N64498-27-RFPREQ-PD-33-0001.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PD-33-0001; Solid Waste Pulper

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 11:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Philadelphia Division

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Produces and tests Mod I Large Pulpers (LP) and Mod I Small Pulpers (SP) for prime contractors on Naval Surface Warfare Center, Philadelphia Division projects. Manufactures systems per NAVSEA drawings and performs testing per interface drawings. Requires ISO 9001:2015 and NIST SP-800-171 compliance. Delivers completed and tested Pulper systems.

Similar Contracts

Same NAICS industry code

Fabrication and Supply of Pump Housing Stand (P/N HS9612)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

Centrifugal Fan Assembly Manufacturing/SupplyThis subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the manufacture or sourcing of 96 centrifugal fan assemblies under NSN 4140-01-548-2496. The project is designated as a Total Small Business Set-Aside under NAICS code 333999. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 9, 2026. The contractor must ensure all units are marked according to MIL-STD-129 and palletized in strict accordance with RP001 DLA Packaging Requirements. Additionally, the supplier is required to maintain compliance with DFARS 252.204-7012 and DFARS 252.223-7008, specifically regarding the restrictions and reporting of hexavalent chromium.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

Supply of Hose Reel Assemblies (NSN 4930-01-274-6816)This subcontract involves the procurement or manufacture of three hose reel assemblies matching NSN 4930012746816 to support prime contractors delivering DLA Troop Support supply contracts. The project is a total small business set-aside under NAICS code 333999 and is managed by the Department of Defense. Deliveries must be made to the designated government location in Tracy, California. The selected provider must strictly adhere to RP001 DLA Packaging Requirements for Procurement and maintain compliance with NIST SP 800-171 DoD Assessment Requirements. Interested parties must submit their responses by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

Supply of Axial Fan Impellers (NSN 4140013373965)This subcontract involves the procurement or manufacture of 4,000 axial fan impellers matching NSN 4140013373965 to support prime contractors on DLA Troop Support Construction and Equipment MRO projects. All supplied components must strictly adhere to the DLA Master List of Technical and Quality Requirements, and the provider is responsible for submitting all required shipping documentation and invoices. The contract is managed under the Department of Defense for the Construction and Equipment MRO SVC I agency, with the place of performance located at Tinker AFB. The successful contractor is required to complete the delivery of all units within 167 days after the order is placed.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

Hydraulic System Component Test Set SupplierThis subcontract involves the manufacture or procurement of 10 Hydraulic System Component Test Sets, identified by NSN 4910-20-01-63521, for prime contractors supporting DLA supply contracts. All units must be produced in strict compliance with the DLA Master List of Technical and Quality Requirements and undergo full testing prior to delivery. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 333999 for the Department of Defense. A critical requirement for this engagement is adherence to NIST SP 800-171 cybersecurity standards to ensure the protection of controlled unclassified information. Interested parties must note the response deadline of November 9, 2026, for this requirement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support agency.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

Supply of Vaneaxial Fans (NSN 4140008805140)This subcontract involves the sourcing and manufacture of eight vaneaxial fans identified by NSN 4140008805140 for prime contractors supporting DLA Troop Support. The selected provider must ensure all units strictly adhere to the technical specifications associated with the National Stock Number and manage shipment preparations under the First Destination Transportation program. Performance for this contract is centered at Robins Air Force Base. Eligible candidates must maintain active SAM registration and hold a Small Business certification. The procurement falls under NAICS code 333999 and is managed through the Department of Defense in Warner Robins. Interested parties must submit their responses by November 9, 2026.

POSTED

about 2 hours ago

DEADLINE

Supply of Vaneaxial Fans (NSN 4140008447680)This subcontract, issued by the Department of Defense for the Warner Robins agency, requires the manufacture or sourcing of nine Vaneaxial Fans under NSN 4140008447680. The supplier must ensure all units adhere to the latest OEM drawing revisions and technical specifications. Additionally, the contractor is responsible for providing Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333999, with performance taking place at Robins Air Force Base. Interested parties must respond by November 9, 2026, to provide the required fans and supporting documentation for prime contractors delivering on DLA supply contracts.

POSTED

about 2 hours ago

DEADLINE

Vacuum System Engineering and FabricationThis subcontract for Vacuum System Engineering and Fabrication involves the design and production of vacuum chambers and associated piping for prime contractors working on Diamond Light Source Limited projects. The scope of work requires the engineering of vacuum systems that strictly adhere to DLS requirements, specifically focusing on material selection for low outgassing, the integration of CF and ISO vacuum flanges, and the use of ultra-high vacuum chambers and pumps. The selected provider is responsible for delivering a fully tested vacuum system that meets all established DLS standards, including rigorous leak testing. This opportunity is categorized under NAICS code 333999, with a response deadline set for November 27, 2026.

Diamond Light Source Limited

POSTED

about 6 hours ago

DEADLINE

Ion Exchange Pressure Vessel and Valve Manifold ManufacturerThis subcontract involves the fabrication and supply of treatment system hardware for prime contractors working on projects for the La Habra Heights County Water District. The scope of work requires the manufacture of six 12-foot diameter pressure vessels organized into three lead/lag pairs, along with the fabrication of integral lead/lag valve manifolds. All equipment must be approved by the California Division of Drinking Water for the specific purpose of PFAS removal in drinking water systems. The project is categorized under NAICS code 333999 and will be performed in Whittier, California. Interested parties must submit their responses by the deadline of November 25, 2026. The final deliverables for this contract include the delivery of the six pressure vessels and their associated valve manifolds.

La Habra Heights County Water District

POSTED

about 6 hours ago

DEADLINE

PFAS Ion Exchange Treatment System

Solicitation # 20261027046

The La Habra Heights County Water District is soliciting proposals for the procurement of a single pass ion exchange (IX) equipment system and treatment resin media to remove PFAS, including PFOA and PFOS, from groundwater. The system will be installed at the Well 10 and 11 site in Whittier, California, to treat water from those wells and other offsite sources for use as potable water. The required equipment consists of three sets of lead/lag systems featuring paired 12-foot diameter pressure vessels and integral valve manifolds, capable of treating up to 6,000 gpm on a continuous basis. The system must utilize pre-rinsed PFAS selective resin media, such as Purolite PFA694E or an approved equivalent, and must be approved by the California Division of Drinking Water. A primary performance goal is to reduce PFAS concentrations in effluent groundwater to non-detect levels, defined as less than 1 microgram per liter per EPA laboratory testing Method 533. Additionally, the supplier must provide anchoring designs and structural calculations for the vessels and valve tree support, certified by a Professional Engineer registered in the State of California. Proposals are due by November 25, 2026, and should be submitted via email to General Manager Joe Matthews.

La Habra Heights County Water District

POSTED

about 6 hours ago

DEADLINE

Solid Waste Shredder FabricationThis subcontract for Solid Waste Shredder Fabrication involves the production and testing of Mod I Metal and Glass Shredders as well as Mod I Plastics Waste Shredders. Working for prime contractors on projects for the Naval Surface Warfare Center, Philadelphia Division, the selected provider must manufacture units according to NAVSEA drawings of record for Top Level Assembly and Interface. The final deliverable consists of fully completed and tested shredder units. The project is managed under the Department of Defense and requires strict adherence to ISO 9001:2015 and NIST SP-800-171 compliance standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this effort categorized under NAICS code 333999.

Nswc Philadelphia Division

POSTED

about 7 hours ago

DEADLINE

Plastics Waste Processing Equipment (PWP) FabricationThis subcontract involves the fabrication, production, and testing of Mod I and Mod II Plastics Waste Processors and Mod I CMU Assemblies for the Naval Surface Warfare Center, Philadelphia Division. The selected contractor is responsible for manufacturing equipment according to NAVSEA drawings of record and conducting rigorous testing as specified in the statement of work attachments to ensure the delivery of fully completed and tested units. Performance of this contract requires strict adherence to quality and security standards, including ISO 9001:2015, NIST SP-800-171, and DFARS 252.246-7007 compliance. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 333999, supporting Department of Defense initiatives.

Nswc Philadelphia Division

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

Electrical Enclosure & Control System FabricationThis subcontract for Electrical Enclosure and Control System Fabrication supports the Naval Surface Warfare Center, Philadelphia Division. The scope of work involves the manufacture of specialized electrical enclosures and control valve assemblies for prime contractors, specifically fabricating MKIII REE, SEE, Mini-AU, AU, and various cooling, cleaning, and pulper control valves according to NAVSEA specifications. Performance of the contract takes place in Philadelphia. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and comply with NIST SP-800-171 and DFARS 252.246-7007 standards for supply chain traceability. The project falls under NAICS code 335999 and requires the final delivery of completed enclosures and valve assemblies.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

BIG BLUE MACHALTS

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a requirement titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is managed by the office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 12, 2026. For further inquiries or detailed specifications, the primary point of contact is Anthony Ricciardi, who can be reached via email or phone. Additional documentation and submission details are available through the provided government workspace link.

Ship Building and Repairing

POSTED

about 7 hours ago

DEADLINE

PD-33-0001; Solid Waste Pulper

Solicitation # N64498-27-RFPREQ-PD-33-0001

The Naval Surface Warfare Center, Philadelphia Division (NSWCPD) is conducting market research via a Sources Sought notice for the production, testing, and delivery of solid waste processing equipment for naval ships. The requirement includes the procurement of plastic waste processing equipment, large and small pulpers, and solid waste shredders, specifically Mod I Metal and Glass Shredders and Plastics Waste Shredders, as well as associated control valves. The anticipated contract will be a Firm-Fixed-Price IDIQ with a five-year period of performance, including a 60-month ordering period. Manufacturing and testing will occur at the contractor's facility, with deliveries made to NSWCPD Philadelphia and various U.S. Navy ship construction or alteration sites, including locations in Pennsylvania, Virginia, Wisconsin, Mississippi, and Maine. Interested businesses, including large and small concerns such as HUBZone, 8(a) SDB, and SDVOSB, must submit a capability statement of no more than eight pages by 6:00 PM EST on November 12, 2026. Submissions must demonstrate prime contractor experience with similar requirements, the technical ability to perform at least 50 percent of the work with internal employees, and the capacity to manage the project's magnitude. The equipment must be manufactured according to NAVSEA drawings of record and adhere to ISO 9001:2015 quality standards. Additionally, contractors must comply with DFARS 252.246-7007 regarding counterfeit part prevention and NIST SP-800-171 for the protection of Controlled Unclassified Information. A formal Request for Proposal is expected to be issued in April 2026 via SAM.gov.

POSTED

about 7 hours ago

DEADLINE

BIG BLUE 3 MAC - N64498-26-Q-5284

Solicitation # N6449826Q5284

The BIG BLUE 3 MAC solicitation, identified by number N6449826Q5284, is issued by the Department of Defense through the Naval Surface Warfare Center Philadelphia Division. This procurement falls under NAICS code 336611, indicating a focus on the manufacture of boat and marine vessel engines. The opportunity was posted on October 27, 2026, with a response deadline set for November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania. Interested parties may coordinate with the primary point of contact, Anthony Ricciardi, for further inquiries. Detailed specifications and submission requirements can be accessed via the provided government portals.

Ship Building and Repairing

POSTED

DEADLINE

PD-42-0030; PIP – Rolls Royce Marine Gas Turbines

Solicitation # N64498-26-RFPREQ-PD-42-0030_1

Engineering Services

POSTED

DEADLINE

Servo Valve SupplyThis subcontract involves the supply of high-precision electro-hydraulic servo valves for prime contractors working on submarine projects for the Naval Surface Warfare Center, Philadelphia Division. The scope of work requires the sourcing and rigorous testing of valves to guarantee precise fluid control and response times, ensuring all components meet strict Navy technical specifications for performance and reliability. The project is managed under the Department of Defense with performance taking place in Philadelphia, Pennsylvania. Interested parties should note the posting date of October 26, 2026, with a response deadline set for November 2, 2026. The contract is categorized under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

Directional Control Valve SupplyThis subcontract involves the procurement and supply of specialized directional control valves for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work requires the delivery of Navy-approved solenoid or manual valves specifically engineered for high-pressure submarine environments, ensuring all components meet rigorous flow, pressure, and interface specifications. The project is managed under the Department of Defense with performance taking place in Philadelphia. Interested parties must adhere to the established timeline, with the solicitation posted on October 26, 2026, and a response deadline set for November 2, 2026. The contract falls under NAICS code 332911, focusing on the delivery of high-quality, validated hardware for critical naval submarine projects.

Industrial Valve Manufacturing

POSTED

DEADLINE

Hydraulic Manifold FabricationThis subcontract involves the fabrication of high-precision hydraulic manifold assemblies for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The scope of work requires the use of high-grade alloys and steels to perform precision CNC machining, drilling, boring, and deburring of manifold blocks. All deliverables must adhere to strict Navy submarine tolerances and applicable military standards to ensure operational integrity. The project is managed under the Department of Defense with performance taking place in Philadelphia. Classified under NAICS code 332912, the contract focuses on the delivery of finished hydraulic manifold blocks and complete assemblies. The solicitation was posted on October 26, 2026, with a response deadline of November 2, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Hydraulic System Integration & TestingThe Hydraulic System Integration and Testing subcontract involves providing final assembly and pressure testing for hydraulic systems supporting submarine projects at the Naval Surface Warfare Center, Philadelphia Division. The scope of work includes installing valves into manifolds, performing sealing, and conducting leak and functional pressure testing utilizing high-pressure pumps and hydraulic test benches to deliver fully assembled manifold systems. This Department of Defense project is based in Philadelphia, Pennsylvania, under NAICS code 332999. The solicitation was posted on October 26, 2026, with a response deadline of November 2, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Project Control Plan (PCP) and Technical ReportingThis subcontract focuses on the development of technical roadmaps and quality evidence documentation for prime contractors supporting Navy NSWCPD projects. The primary scope of work involves creating the Project Control Plan as the central Technical Work Document, generating Condition Found Reports in accordance with CDRL A008, and submitting detailed project plans featuring measurable milestones per CDRL A004. All deliverables must strictly adhere to applicable Data Item Descriptions and the requirements set forth by the NSWCPD Technical Point of Contact. The successful contractor is responsible for the delivery of the Project Plan, the Project Control Plan, all required Condition Found Reports, and a comprehensive Final Report. This effort falls under NAICS code 541330 and supports the Department of Defense through the Naval Surface Warfare Center Philadelphia Division.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS