Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on November 3, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PUMP,AXIAL PISTONS

Closed
N0010422QJG21Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333914
New
Federal
USCG Seawater Pumps
Solicitation # 70ZU0327X51519B00
The U.S. Coast Guard (USCG), through the Small Boat Product Line (SBPL) and the Surface Forces Logistics Center, is conducting market research via a Sources Sought Notice to identify qualified companies capable of providing 96 new seawater pump assemblies for use on USCG Cutters. A seawater pump is defined as a complete unit consisting of a pump, motor, coupling, and mounting base. The requirement falls under NAICS 333914, Measuring, Dispensing and Other Pumping Equipment Manufacturing, with a small business size standard of 750 employees. Interested parties must be registered in SAM.GOV and submit a capability statement, including a technical proposal not exceeding five pages, by the response deadline of December 7, 2026. Technical specifications require the use of ASTM F468 Alloy 400 materials and motors compliant with IEEE Standard 45 for below-deck service, designed for 460 VAC, 3 Phase, 60 Hz ungrounded power. Deliverables include the hardware, Provisioning Technical Data (PTD), Engineering Data for Provisioning (EDFP), and technical publications in both paper and electronic formats, with drawings provided in AutoCAD 2025. All units must be preserved, packaged, and marked according to SFLC-D-084-0481 and shipped to the Surface Forces Logistics Center in Baltimore, Maryland. Vendors must maintain a Quality Assurance Plan per ANSI/ASQC Q9001-2008 and a calibration program traceable to the National Institute of Standards (NIST). This notice is for research purposes only and does not constitute a formal solicitation or commitment to award a contract.
CG-SEA-C23

POSTED

about 17 hours ago

DEADLINE

in 21 days
NAICS: 333914
New
Federal
43--RESERVOIR,HYDRAULIC, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QFA11
Solicitation N00383-27-Q-FA11 is a request for quotations issued by NAVSUP Weapon Systems Support in Philadelphia for the teardown, evaluation, repair, and modification of two hydraulic reservoir units under National Stock Number 7RH 4320 017253536 H5. The requirement is solicited under Emergency Acquisition Flexibilities and is intended to be awarded within the terms and conditions of BOA N00383-26-G-P401. Due to a lack of sufficient technical data, the government requires Government Source Approval prior to award; any offeror not already approved must submit the required documentation from the NAVSUP WSS Source Approval Brochure to be considered. The contract includes an initial induction period of 365 calendar days from the date of award, with a government option to extend this period for a total of two years. Contractors must provide option pricing for a maximum of two units over the contract period, including separate pricing for the second year if costs change after the first 365 days. Deliveries are specified as FOB Destination with a 90-day delivery window. The contract mandates a 365-day warranty for supplies of a noncomplex nature, with packaging and preservation adhering to MIL-STD-2073. Payment and receiving reports must be processed electronically via the Wide Area Workflow system. Quotations are due by November 19, 2026.
Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in 3 days
NAICS: 333914
New
Federal
COMPRESSOR,AIR,MP
Solicitation # N0010427QJA28
This fixed-price solicitation, issued by NAVSUP Weapon Systems Support (NAVSUP WSS), seeks a contractor for the repair of an MP Air Compressor (NIIN 016047524). The government requires a Repair Turnaround Time (RTAT) of 118 days, measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. All freight is handled by the Navy as FOB Origin under the Commercial Asset Visibility (CAV) Statement of Work. The contract includes an option for increased quantity up to 100% of the original item and stipulates that unexcusable delays in meeting the RTAT will result in a price reduction per unit per month. Award will be made to a single offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Technical requirements mandate that all repairs adhere to original manufacturer specifications and drawings, with physical identification complying with MIL-STD-130. Packaging must follow MIL-STD-2073 and MIL-STD-129 standards. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment processing. The contractor is also responsible for providing Material Safety Data Sheets for any hazardous materials and maintaining inspection records for 365 days following final delivery.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 7 days
NAICS: 333914
New
Federal
43--RESERVOIR,HYDRAULIC, IN REPAIR/MODIFICATION OF
Solicitation # N0038327QFA12
Solicitation N00383-27-Q-FA12 is a request for the repair of one hydraulic reservoir unit, National Stock Number 7RH 4320 017253536 H5, issued by NAVSUP Weapon Systems Support. The requirement is solicited under Emergency Acquisition Flexibilities and is intended to be awarded within the terms and conditions of BOA N00383-26-G-P401. Because the government lacks sufficient data to contract with sources other than the current provider, Government Source Approval is required prior to award; non-approved sources must submit the necessary documentation from the NAVSUP WSS Source Approval Brochure with their proposal to be considered. The Small Business Administration has determined that a set-aside recommendation is not applicable for this repair. The contract specifies an induction period of 365 calendar days from the date of award, with a potential government extension for a total of two years. Contractors must provide option pricing for a maximum of one unit over the contract period, including separate pricing for the second year if costs change after the first 365 days. Delivery is required within 90 days, with inspection and acceptance occurring at the origin. Supplies must be packaged and marked according to MIL-STD-2073 and comply with FAR 52.247-52 for shipments to water ports or air terminals. The contract includes a 365-day warranty for noncomplex supplies, with a 45-day window for notice of breach after the last delivery. All invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system.
Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in 3 days

AI Contract Overview

Show more

This contract involves the repair of PUMP, AXIAL PISTONS, with the primary goal of meeting a Repair Turnaround Time (RTAT) of 59 days, subject to government inspection and approval. The contract is a firm-fixed-price arrangement, with options to increase the quantity within 365 days, and emphasizes accelerated delivery, allowing early completion if feasible. The contractor is responsible for performing all inspections, adhering to specified quality standards, and maintaining detailed records of their inspection activities. All repaired items must meet operational and functional requirements, with strict identification and marking standards in accordance with MIL-STD-130. The contract also stipulates that freight is FOB Origin, and all transactions must be accurately reported within specified timeframes using the Commercial Asset Visibility system. The solicitation, issued by the Naval Surface Warfare Systems Support in Mechanicsburg, Pennsylvania, includes detailed clauses on applicable documents, design change procedures, and quality assurance measures. It requires the contractor to provide a quote that includes unit price, total price, and RTAT, along with capacity constraints if the contractor cannot meet the specified RTAT. The contract also includes provisions for testing, evaluation, packaging, and marking, as well as instructions for ordering related technical documents and standards. The government reserves the right to exercise a 100% option quantity, with the same delivery terms, and enforces price reductions for delays that exceed the RTAT, unless delays are excusable. The response deadline for proposals is May 23, 2025, and interested parties must verify their authorization to distribute the original manufacturer's items to qualify for award.

General Info

Repair of axial piston pumps for U.S. Navy with 59-day turnaround, fixed price, and strict quality standards.

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

5
PDF, High priority: read this firstamendment
High
PDF, High priority: read this firstamendment
High
PDF, High priority: read this firstamendment
High
PDF, High priority: read this firstrfq
High
PDF, High priority: read this firstamendment
High

Read all 5 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • PUMP, LUBRICANT TRANSFEOpen now, due in 11 days
  • PUMP, CENTRIFUGALOpen now, due in 11 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Notice updated

The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
CONTACT INFORMATION|4|N7M1.12|HFC|7176054147|Sign up to see this detail| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|combo invoice and receiving||TBD|N00105|TBD|TBD|SEE SCHEDULE|SEE SCHEDULE|SEE SCHEDULE||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|X||||||||||| OPTION FOR INCREASED QUANTITY (MAR 1989)|1|365 DAYS | ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|X||||| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAR 2025)(DEVIATION 2025-O0003 AND2025-O0004))|13|333914|750|x|x|||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||| The purpose of this amendment is to: 1. decrease the overall base quantity from 22 EA to 5 EA 2. extend the due date to 14 NOV 2025. See continuation page for details. This amendment makes no other changes. The purpose of this amendment is to: 1. increase the overall base quantity from 5 EA to 22 EA and 2. extend the due date to 25 JUL 2025. See continuation page for details. This amendment makes no other changes. \ The purpose of this amendment is to: 1: update the clauses and provisions 2: extend the offer due date to 23 MAY 2025. See continuation page for details. This amendment makes no other changes. \ Accelerated delivery is encouraged and accepted before the delivery date(s) listed in the schedule. ^^ All freight is FOB Origin. This RFQ is for repair. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding. The Government is seeking a Repair Turnaround Time (RTAT) of: 59 days Government Source Inspection (GSI) is required. Please note freight is handled by Navy CAV or Proxy CAV as stated in NAVSUPWSSFA24 or NAVSUPWSSFA25. Your quote should include the following information: QUOTE AMOUNT AND RTAT Unit Price:__________ Total Price:__________ Repair Turnaround Time (RTAT): _______ days If your company is not quoting the Government 's Required Repair Turnaround Time (RTAT) or earlier, provide your company's capacity constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ Repair Turnaround Time (RTAT): the resultant contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor's facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system. In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in this contract. Check one: Firm-fixed-Price ___ Not to Exceed (Ceiling Price) ___ Estimated___ Return Material Authorization # (RMA), if applicable:__________ Delivery Vehicle (if Delivery Order requested) (if your company has a current BOA/IDIQ, for example) :__________________ TESTING AND EVALUATION IF BEYOND REPAIR T&E fee/price (if asset is determined BR/BER): If an item is determined BR, and the contractor provides documentation that costs were incurred during evaluation and determination of BR, the contracting officer will negotiate a reduced contract price, not-to exceed (NTE) $___________associated with the repair effort to reflect the BR status of the equipment. The T&E fee (if asset is determined BR/BER) was determined/computed based on:______________________________________. AWARDEE INFO & PERFORMANCE LOCATION Awardee CAGE: __________ Inspection & Acceptance CAGE, if not same as "awardee CAGE": __________ Facility/Subcontractor CAGE (where the asset should be shipped), if not same as "awardee CAGE":__________ IOT COMPARE REPAIR PRICE TO PRICE TO BUY NEW New unit price:__________ New unit delivery lead-time:__________ The Contract Officer would like to exercise a 100% option quantity within 365 days of the effective date of the repair contract award. The contractor will provide the same delivery time. A modification will be completed at the time the option is exercised and all current contract terms and conditions will apply tothe option quantity. Please indicate if the Contracting Officer may exercise the 100% option quantity for the repair contract. Yes __ or No __ Please indicate the pricing for the 100% option quantity. Price Each:___________ IMPORTANT NOTE: Any asset for which the contractor does not meet the required RTAT will incur a price reduction per unit/per month the contractor is late - any delay determined to be excusable (e.g. Government Delay) will not result in a price reduction. If a price reduction is required due to unexcusable contractor delay, the Contracting Officer will implement the aforementioned price reduction via a "reconciliation modification" at the end of the contract performance. Price reductions made pursuant to this section shall not limit other remedies available to the Government for failure to meet required RTATs, including but not limited to the Government's right to terminate for default. In reference to the above important note, the contractor provides the following price reduction amount per unit per month the contractor does not meet the RTAT: $__________, up to a maximum of: $_________. \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the PUMP,AXIAL PISTONS . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The PUMP,AXIAL PISTONS repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;93835 6607302; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.4 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161. 6.3 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer.

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS