This Solicitation opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PUMP, BUCKET, LUBRICA
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract involves the procurement of 39 units of a T-handle type, hand-operated pressure pump system designed for lubrication, complete with a 6 to 10 foot heavy-duty 3/8-inch I.D. hose, follower plate, and all necessary components, including a container with a foot step and leakproof cover that supports the pump head. Each unit must be overpacked with the manufacturer’s full commercial manual covering operation, service, maintenance, repair, and parts information. The item is identified by NSN 4930-00-244-4859 and must comply with stringent military standards including MIL-STD-130N for identification marking with machine-readable Data Matrix barcodes, MIL-STD-2073-1E for packaging using clng/dry preservation methods without any plastic materials, and MIL-STD-129 for shipment labeling with adherence to Hazard Communication Standard for hazardous substances. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Delivery is due 167 days after order acceptance to the DLA Distribution facility in New Cumberland, PA, under FOB Destination terms. The solicitation uses a Lowest Price Technically Acceptable (LPTA) evaluation method, with no pricing data available in the document, and requires electronic submission via DIBBS, AMPS, or VSM by August 17, 2026. Contractors must comply with numerous FAR and DFARS clauses including employment eligibility verification, combating human trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and safeguarding covered defense information, prohibition of hexavalent chromium, export control, and electronic payment processing via WAWF. All offerors must be registered in SAM, provide a UEI and CAGE code, and certify their socioeconomic status including small business, SDVOSB, HUBZone, or WOSB status where applicable. No contract type, price, or options are specified in the solicitation, and award may be automated for micro-purchase level quotes prior to the deadline.
General Info
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
PUMP, BUCKET, LUBRICATING.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
T-HANDLE TYPE, HAND-OPERATED PRESSURE PUMP WITH
6 TO 10 FEET OF HEAVY DUTY 3/8-INCH I.D. HOSE,
FOLLOWER PLATE, AND OTHER REQUIRED COMPONENTS,
INCLUDING CONTAINER EQUIPPED WITH FOOT STEP AND
LEAKPROOF COVER THAT SUPPORTS PUMP HEAD.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
IDENTIFY TO:
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE CONTRACTOR WILL OVERPACK ONE EACH MANUFACTURER'S COMMERCIAL MANUAL CONSISTING OF OPERATION, SERVICES, MAINTENANCE, REPAIR NSN/Part Number: 4930-00-244-4859 Quantity: 39 EA Purchase Request: 7017757173QTY: 39 Delivery: 167 days ADO
More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS