Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

29--PUMP,HYDRAULIC RAMP

Awarded
SPE7L1-26-Q-1348Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 527 hydraulic ramp pumps under NSN 2990-01-241-9143, issued as a total small business set-aside with solicitation number SPE7L1-26-Q-1348. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and delivery is required within 370 days after contract award. The purchase is managed by the Department of Defense’s Land Supply Chain under NAICS code 333996, with performance located in Texarkana, Texas. The contract incorporates a comprehensive set of technical and quality requirements from the DLA Master List, including provisions for qualified products and manufacturers lists, configuration change management, export control of technical data governed by ITAR or EAR, and specific packaging and marking standards. Technical data subject to export controls may only be accessed by contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal DLA authorization. Additional requirements include inspection and acceptance at origin, proper use of measuring and test equipment, removal of government identification from non-accepted supplies, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All subcontracting and compliance obligations are tightly regulated to ensure adherence to federal acquisition standards and security protocols.

General Info

Procurement of 527 hydraulic ramp pumps under small business set-aside, delivery in 370 days, Texarkana, Texas, with strict export and quality controls.

Agency

Department Of Defense → LAND SUPPLY CHAIN

Contract Value

$641,980

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

1AL SOLUTIONS LLC

Award Issued Date

Documents

1

RFQ SPE7L1-26-Q-1348 Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Brandon Armstrong
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PUMP,HYDRAULIC RAMP.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I'NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THEWEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER INEFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATIONCHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE ATORIGIN
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORECOMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML).QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)"APPLY.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
RQ032: EXPORT CONTROL OFTECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Trafficin Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization fromeither the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons andnationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S.companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limitsdistribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP)certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLAExport-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by theDLA controlling authority to access the export-controlled data. NSN/Part Number: 2990-01-241-9143 Quantity: 527 EA Purchase Request: 7011498427QTY: 527 Delivery: 370 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-27-T-1005
Solicitation SPE7M1-27-T-1005 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 13 spring-loaded shaft seal assemblies, identified by NSN 4320-01-439-0131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Delivery is to be made to DLA Distribution San Diego, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with various FAR and DFARS clauses, including those regarding cybersecurity (DFARS 252.204-7012), the Buy American Act, and the Berry Amendment. Quotations must be submitted through the DIBBS portal by October 26, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
SLEEVE, SHAFT, PUMP
Solicitation # SPE7M1-27-U-0956
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
HOUSING, LIQUID PUMP
Solicitation # SPE7M0-27-T-0732
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
PLATE, PRESSURE, ROTARY
Solicitation # SPE7M1-27-U-0815
Solicitation SPE7M1-27-U-0815 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of rotary pump pressure plates, identified as NSN 4320015734732 and Hydraulics International Inc. part number 061481-104. This critical application item is being sought through a unilateral Simplified Indefinite-Delivery Contract with an estimated annual quantity of 21 units and a contract maximum value of 350,000.00 dollars. Delivery is required FOB Origin within 130 days, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Environmental restrictions prohibit the use of Class I ozone depleting chemicals and strictly regulate mercury usage per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, and all quotes must be submitted via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
COVER, HYDRAULIC, PUMP-M
Solicitation # SPE7M1-27-U-0816
Solicitation SPE7M1-27-U-0816 is a Total Small Business Set-Aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of hydraulic pump-motor covers, identified by NSN 4320-01-581-1642 and part number 7250019-019. This is a unilateral Indefinite Delivery Contract (IDC) with a maximum value of 350,000.00 USD and an estimated annual quantity of 72 units. The delivery requirement is 57 days after receipt of order with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act and Berry Amendment, and the prohibition of unauthorized additive manufacturing.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
PUMP, RECIPROCATING
Solicitation # SPE7M1-27-T-0898
Solicitation SPE7M1-27-T-0898 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 17 reciprocating pumps, including filters, under NSN 4320-01-277-4631. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses certified by the Small Business Administration. The required delivery is 46 days after receipt of order, with shipments delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA packaging requirements RP001 and technical requirements RA001. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Additionally, the government will not evaluate or award contracts to offerors providing items produced via additive manufacturing.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
PUMP-PLATE ASSEMBLY
Solicitation # SPE7M1-27-U-0817
Solicitation SPE7M1-27-U-0817 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Pump-Plate Assemblies, NSN 4320015742411. This total small business set-aside seeks a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD and an estimated annual quantity of 48 units. Quotations are due by October 27, 2026, and will be evaluated based on price and conformity to the specified terms and conditions. The contract requires delivery within 165 days after order, with shipping terms set as FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. Strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is mandatory, along with compliance with DLA packaging requirements RP001 and quality requirements RA001. Additionally, the contractor must ensure that no Class I ozone-depleting chemicals are used in the items and must utilize the Wide Area WorkFlow system for all electronic payment requests and receiving reports.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
CYLINDER BLOCK UNIT, HY
Solicitation # SPE7M1-27-U-0806
Solicitation SPE7M1-27-U-0806 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Cylinder Block Units for hydraulic motor-pumps, identified by NSN 4320015656163 and part number 1FX292. This request may result in a unilateral Indefinite Delivery Contract for a one-year period with a maximum value of 350,000.00 dollars. The estimated annual quantity is 22 units, with a guaranteed contract minimum of 3 units and a minimum delivery order quantity of 5 units. Delivery is required within 34 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization, while ensuring all DLA Master List of Technical and Quality Requirements take precedence. Hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment will be processed electronically through Wide Area WorkFlow. Award evaluation is based on the quoted price for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not quote used or remanufactured items and maintains a quote validity period of at least 90 days.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
PARTS KIT, HYDRAULIC PU
Solicitation # SPE7M1-27-T-1654
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
PUMP, AXIAL PISTONS
Solicitation # SPE7M1-27-T-1693
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-27-U-0804
Solicitation SPE7M1-27-U-0804 is a Total Small Business Set-Aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 44 spring-loaded shaft seal assemblies, identified by NSN 4320012760822. The required hardware must meet specifications for Technetics Group Chicago LLC part number LO-8502 REV D or Dover Pumps and Process Solutions part number 331488. This is a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and a performance period of one year. Delivery is required within 90 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality requirements, including the prohibition of intentionally added mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for the estimated annual demand, and the procurement may be eligible for automated award.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333996
New
DIBBS
SLEEVE, STUFFING BOX
Solicitation # SPE7M1-27-T-1035
Solicitation SPE7M1-27-T-1035, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 24 units of a stuffing box sleeve. This critical application item is manufactured from a copper-nickel alloy and corresponds to NSN 4320-01-125-5906 and Circor Naval Solutions LLC part number 088C0014H101A. The required delivery date is April 28, 2027, with a need ship date of April 17, 2027. Delivery is FOB Origin, and the destination for inspection and acceptance is the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and environmental standards, including a prohibition on Class I ozone-depleting chemicals and intentional mercury contamination per NAVSEA 5100-003D. Quality assurance will be conducted via destination inspection using sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-101U
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-18Q4
Solicitation SPE7L1-26-T-18Q4 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for the procurement of 11 O-rings, identified by NSN 5331-21-914-3719 and Reelcraft Industries part numbers 314300-3 or 3600-29-13-15 Item 9. The items are designated as Type I Code Y with a non-extendable shelf life of 180 months. Delivery is required by March 5, 2027, with a need ship date of March 1, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. Strict packaging and marking standards apply to prevent deterioration from ultraviolet rays. Supplies must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with general packaging following MIL-STD-2073-1E and marking adhering to MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Act. Quotes must be submitted via the DIBBS portal by October 9, 2026, and must not utilize additive manufacturing unless specifically authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAR
Solicitation # SPE7L1-26-T-12H8
Solicitation SPE7L1-26-T-12H8 is a request for quotations from the DLA Land and Maritime Land Supply Chain for the procurement of 2,000 vehicular body panels, identified as NSN 2510016734265 and part number 153097-176-1 by Hydraulics International, Inc. This item is designated as a critical application item. The delivery requirement is set for 5 days after order, with an original required delivery date of September 9, 2026. Shipping is FOB Origin, with the destination for inspection and acceptance located in Jacksonville, Florida. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Additionally, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, human trafficking, and cybersecurity. Offerors must submit quotes via the DIBBS portal and maintain active registration in the System for Award Management.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, HYDR
Solicitation # SPE7L1-26-T-986F
Solicitation SPE7L1-26-T-986F is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of one hydraulic manifold assembly, identified by NSN 2590016802969 and Twin Disc Incorporated part number PX92992A. This commercial item is to be delivered FOB Origin to Virginia Beach, Virginia, with a required delivery date of August 13, 2026, and a delivery window of 20 days after order. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment for domestic material restrictions. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS) under NAICS code 333310.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 327999
New
DIBBS
WINDOW, DIAL
Solicitation # SPE7L1-26-T-700L
Solicitation SPE7L1-26-T-700L is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 98 units of Window, Dial, identified by NSN 5355-00-058-0337. The items must be manufactured according to Basic Drawing NR 94580 967593, Revision B, dated April 4, 1967. Delivery is required by January 23, 2027, with a need ship date of November 28, 2026, shipping FOB Origin to DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging requirements (RP001), ASTM D3951, and marking standards MIL-STD-129 and MIL-STD-130N. Due to the nature of the technical data, the procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and offers a price evaluation preference for certified HUBZone small business concerns.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
Supply of Flat Springs (NSN 5360-01-499-9838)This subcontract involves the manufacture or procurement of two flat springs under NSN 5360-01-499-9838 for the Department of Defense Land Supply Chain. The contractor must ensure all items adhere to the DLA Master List of Technical and Quality Requirements, with packaging and palletization following ASTM D3951, MIL-STD-129, and RP001 standards. Delivery is required FOB Origin to Mountain Home AFB in Idaho. Compliance with the Berry Amendment and DFARS 252.204-7012 cybersecurity standards is mandatory for this project. The opportunity falls under NAICS code 332613 and was posted on October 23, 2026, with a response deadline of October 28, 2026.
Spring Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 333618
New
DIBBS
Supply of Specialized O-Rings (NSN 5331017232488)This subcontract through the Department of Defense Land Supply Chain involves the procurement of 10 specialized O-rings adhering to NSN 5331017232488 specifications. The contractor is responsible for manufacturing or sourcing these components ensuring they are produced without Class I ozone-depleting chemicals. All units must be packaged according to RP001 and marked in compliance with MIL-STD-129 standards. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 333618. To be eligible for identification and delivery, the provider must possess a valid CAGE code. The solicitation was posted on October 23, 2026, with a response deadline set for October 28, 2026.
Other Engine Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-8934
Solicitation SPE7L1-26-T-8934, issued on January 13, 2026, by the DLA Land and Maritime Land Supply Chain, is for the procurement of 10 O-rings under NSN 5331-01-723-2488. The delivery is required within 88 days after receipt of order, with a need ship date of May 27, 2025, and a final required delivery date of July 5, 2025. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This is not a small business set-aside, although a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to material and environmental standards, prohibiting the use of Class I ozone-depleting chemicals and asbestos, and restricting the intentional addition of mercury. Packaging must comply with MIL-STD-2073-1E and RP001, with specific requirements for UV protection using opaque bags per MIL-DTL-117. Marking must follow MIL-STD-129, and hazardous materials must be labeled according to 29 CFR 1910.1200. Inspection will be conducted at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with the Buy American Act and the Berry Amendment. Additive manufacturing is prohibited unless specifically authorized.
Other Engine Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 332911
New
DIBBS
PISTON, VALVE
Solicitation # SPE7L1-27-T-0125
Solicitation SPE7L1-27-T-0125 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of two valve pistons, identified by NSN 4820-01-418-8899 and Sargent Aerospace and Defense part number 21219-1000-1. This critical application item is categorized under NAICS code 332911. The required delivery date is November 5, 2026, with a need ship date of August 18, 2026, and a delivery timeframe of 126 days after order. Shipping is FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the item must be free of intentionally added mercury or mercury-containing compounds per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program. Quotes must be submitted electronically via the DIBBS system.
Industrial Valve Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-636H
Solicitation SPE7L1-26-T-636H is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of two flat springs, identified by NSN 5360-01-499-9838. The items are to be delivered to Mountain Home AFB, Idaho, with a required delivery lead time of five days after receipt of order. The contract is governed by NAICS code 332613 and requires destination inspection and acceptance per FAR 52.246-1. Payment processing must be conducted electronically through the Wide Area Workflow system. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, and maintain supply chain traceability documentation per DLAD Procurement Note C03. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Additionally, the award is subject to the Buy American and Balance of Payments Program, the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012. Offerors must be registered in the System for Award Management and provide a Safety Data Sheet for any hazardous materials prior to award to remain eligible.
Spring Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging and transportation for prime contractors supporting Department of Defense Land Supply Chain projects. The scope of work requires the packaging of 387 brackets in strict accordance with MIL-STD-129, RP001, and ASTM D3951 standards, with additional requirements for IP025 hazardous materials packaging when necessary. All shipments must utilize approved MIL-SPEC labeling equipment and materials to ensure full compliance with government regulations. The service provider is responsible for coordinating and delivering all properly packaged and labeled shipments to the DLA Distribution center located in Warner Robins, Georgia. This effort falls under NAICS code 488510 and is managed through the Land Supply Chain agency. Interested parties should note the response deadline of November 23, 2026.
Freight Transportation Arrangement

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Mounting Brackets (NSN 5340-01-470-1155)This subcontract involves the manufacture of 387 precision mounting brackets under NSN 5340-01-470-1155 for the Department of Defense Land Supply Chain. The contractor is required to fabricate new and unused critical application brackets according to Teledyne Defense Electronics PN 178-4667 specifications using precision machining equipment. Compliance is mandatory regarding the DLA Master List of Technical and Quality Requirements and CMMC cybersecurity standards. Additionally, the contract strictly prohibits the use of class I ozone-depleting chemicals during the production process.
Machine Shops

POSTED

6 days ago

DEADLINE

in 26 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 333996
Closed
Federal
43--ROD LINK ASSEMBLY,P
Solicitation # SPE7M126T292Z
DLA Land And Maritime

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 333996
Closed
Federal
63:1 PAINT PUMP
Solicitation # SPMYM4-26-Q-3673
DLA Maritime - Pearl Harbor

POSTED

2 months ago

CLOSED

2 months ago
View Details
NAICS: 333996
Awarded
DIBBS
43--RING,LANTERN
Solicitation # SPE7M1-26-T-227L
MARITIME SUPPLY CHAIN

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Awarded
Federal
43--PARTS KIT,ROTARY PU
Solicitation # SPE7M126T263Y
DLA Land And Maritime

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Closed
Federal
43--CONNECTING ROD,PIST
Solicitation # SPE7M126T294M
DLA Land And Maritime

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 333996
Awarded
DIBBS
43--PUMP-PLATE ASSEMBLY
Solicitation # SPE7M1-26-T-236U
MARITIME SUPPLY CHAIN

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Awarded
Federal
43--PUMP,RECIPROCATING
Solicitation # SPE7M126T100A
DLA Land And Maritime

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Closed
Federal
43--CONNECTING ROD,PISTON
Solicitation # SPE7M126T292X
DLA Land And Maritime

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 333996
Awarded
DIBBS
IMPELLER, PUMP, CENTR
Solicitation # SPE7M1-26-V-098J
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Awarded
DIBBS
PUMP, FUEL, METERING
Solicitation # SPE7LX26FB0WS
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Awarded
DIBBS
PUMP, COOLING SYSTEM
Solicitation # SPE7L126FAFT8
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 333996
Awarded
DIBBS
PUMP, HAND, FUEL PUMP
Solicitation # SPE7LX26FB0UL
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS