Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

PUMP, RECIPROCATING

Awarded

SPE7M1-26-T-198JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a reciprocating pump identified by NSN 4320-01-506-2642 and part number 27938, with a total quantity of 39 units to be delivered FOB origin within 76 days of contract award. The item is designated as a critical application component and must include a fuel metering set screw. All packaging and labeling must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must adhere to MIL-STD-129 for marking and palletization per RP001 requirements. The unit of issue is each (EA) with no variance permitted in quantity, and inspection and acceptance occur at the destination. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must follow DLAD Proc Notes C19 and C20. The original required delivery date is October 21, 2026, with a needed ship date of October 5, 2026. The contract falls under solicitation SPE7M1-26-T-198J, issued by the Department of Defense’s Maritime Supply Chain, with Michael Reese listed as the primary point of contact.

General Info

39 reciprocating pumps solicited by DLA for federal use, due July 20, 2026, via DIBBS portal.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$9,496.89

NAICS

333996 - Fluid Power Pump and Motor Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

HEAT WAGONS INC

Award Issued Date

08/27/2026, 12:00:00 AM UTC

Documents

2

SPE7M1-26-T-198J Request for Quotations

18 pages · rfq

High

SPE7M1-26-V-049Y - Pump, Reciprocating

12 pages · award

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedJul 9

Solicitation

Notice updatedJul 9

NAICS code added: 333996. The notice description changed. The point of contact changed.

AwardedAug 27

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Michael Reese

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7M126V049Y posted on DIBBS. Awardee: HEAT WAGONS INC (CAGE 1T8G7) Total Contract Price: $9,496.89 Award Date: 08-27-2026 Solicitation: SPE7M1-26-T-198J Line items: - PUMP, RECIPROCATING (NSN/Part 4320015062642, PR 7017438792)

Similar Contracts

Same NAICS industry code

Axial Piston Pump Supplier (NSN 4320015236824)This subcontract involves the supply of two axial piston pumps for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The pumps must strictly adhere to NSN 4320015236824 specifications, with a specific prohibition against the use of additive manufacturing. The supplier is required to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements, ensuring all items are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards for delivery to DLA Distribution San Joaquin in Tracy. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333996. Interested parties must submit their responses by November 9, 2026, to meet the requirements of the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1005

Solicitation SPE7M1-27-T-1005, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price procurement for 13 units of a spring-loaded shaft seal assembly, identified by NSN 4320014390131. This is a restricted source, critical application item requiring engineering source approval from the government design control activity, specifically referencing Shapes Group Ltd Co. part number 5750008-003. The required delivery date is October 17, 2027, with a need ship date of April 13, 2027, and a delivery lead time of 168 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The contract mandates strict adherence to technical and quality requirements via the DLA Master List (RA001) and specific environmental restrictions, including the prohibition of intentionally added mercury and Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information. Quotations must be submitted through the DIBBS portal, and the government will not evaluate items produced via additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-U-0956

Solicitation SPE7M1-27-U-0956 is an Indefinite Delivery Contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 38 pump shaft sleeves, identified by NSN 4320-01-400-3351. The requirement specifies adherence to Navy Drawing 803-6962399, with specific material and dimensional requirements detailed across sheets 4, 4.1, and 16. Delivery is required within 120 days after receipt of the order, with offers submitted based on FOB Origin under the First Destination Transportation program. Inspection and acceptance are both conducted at the origin. The contract mandates strict compliance with several technical and security standards, including CMMC Level 2 certification and NIST SP 800-171 assessment requirements. Technical and quality standards are governed by the DLA Master List, while packaging must follow ASTM D3951 and marking must comply with MIL-STD-129. Due to the nature of the technical data, export controls under ITAR or EAR apply, requiring approved US/Canada Joint Certification Program certification for access. This is not a small business set-aside, and award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

HOUSING, LIQUID PUMP

Solicitation # SPE7M0-27-T-0732

Solicitation SPE7M0-27-T-0732 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one unit of a liquid pump housing, identified by NSN 4320005099378. The item is associated with Champ Industries, Inc. part number ES1432 and engineering model ES1436. Delivery is required within five days of order, with an original required delivery date of October 26, 2026. The shipment is designated as FOB Origin and is to be delivered to Tyndall AFB in Florida. Inspection and acceptance will both occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must follow RP001 guidelines. Payment and invoicing are to be processed electronically via Wide Area WorkFlow. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Evaluation for award may include a price preference for HUBZone concerns.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

PLATE, PRESSURE, ROTARY

Solicitation # SPE7M1-27-U-0815

Solicitation SPE7M1-27-U-0815 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 21 pressure plates for rotary pumps, identified by NSN 4320015734732 and part number 061481-104. This is a total small business set-aside that may result in a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars. The items are designated as critical application items and must be delivered within 130 days after the order is placed, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including CMMC Level 2 Self-Assessment and the DLA Master List of Technical and Quality Requirements. Environmental restrictions prohibit the intentional addition of mercury and the use of Class I ozone-depleting chemicals. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Award will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

COVER, HYDRAULIC, PUMP-M

Solicitation # SPE7M1-27-U-0816

Solicitation SPE7M1-27-U-0816 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of hydraulic pump-motor covers, identified by NSN 4320015811642 and part number 7250019-019. This request may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD for a one-year period. The estimated annual quantity is 72 units, with a required delivery timeframe of 57 days after order. Delivery is FOB Origin, while inspection and acceptance are conducted at the destination per FAR 52.246-1. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies that mercury must not be intentionally added to the hardware. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Additionally, the contractor must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M1-27-T-0898

Solicitation SPE7M1-27-T-0898, issued by the DLA Weapons Support Maritime Supply Chain, is a set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) for the procurement of 17 reciprocating pumps, which must include the filter. The requirement is identified by NSN 4320-01-277-4631 and includes the provision of one manufacturer's commercial manual covering operation, services, maintenance, and repair. Delivery is required within 46 days after receipt of order, with shipping terms established as FOB Origin and the final destination for inspection and acceptance located in Tracy, California. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, and the use of additive manufacturing is prohibited. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material labeling regulations is mandatory for the successful offeror.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PUMP-PLATE ASSEMBLY

Solicitation # SPE7M1-27-U-0817

Solicitation SPE7M1-27-U-0817 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Pump-Plate Assemblies, identified by NSN 4320015742411. This is a total small business set-aside for a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars. The government is seeking an estimated annual quantity of 48 units, with a delivery requirement of 165 days after the order is placed. Terms are specified as FOB Origin, and the contract is issued under the First Destination Transportation program. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Additionally, the contract prohibits the use of Class I ozone depleting chemicals and requires compliance with the Hazard Communication Standard for any hazardous materials. Inspection and acceptance will occur at the destination. Payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

CYLINDER BLOCK UNIT, HY

Solicitation # SPE7M1-27-U-0806

Solicitation SPE7M1-27-U-0806 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Cylinder Block Units for hydraulic motor-pumps, identified by NSN 4320015656163 and part number 1FX292. This request may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars for a one year period. The estimated annual quantity is 22 units, with a guaranteed contract minimum of 3 units and a minimum delivery order quantity of 5 units. Delivery is required within 34 days after receipt of order, with FOB and inspection/acceptance points set at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring palletization complies with RP001. All DLA Master List of Technical and Quality Requirements take precedence over general packaging standards. Invoicing and payment must be processed electronically through Wide Area WorkFlow. Award evaluation is based on the price quoted for the estimated annual demand, and the buy may be eligible for automated award provided the offeror does not quote used or remanufactured items and maintains a quote validity period of at least 90 days. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PARTS KIT, HYDRAULIC PU

Solicitation # SPE7M1-27-T-1654

Solicitation SPE7M1-27-T-1654 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of eight hydraulic pump parts kits, identified by NSN 4320013022543 and part number 300433. The requirement is categorized under NAICS code 333996 and is not a small business set-aside, although a HUBZone price evaluation preference may be applied. The required delivery date is February 4, 2027, with a delivery timeline of 86 days after order. Delivery is FOB Destination, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 and MIL-STD-129, with ASTM D3951 serving as a general standard unless superseded by the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity reporting for covered defense information, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

PUMP, AXIAL PISTONS

Solicitation # SPE7M1-27-T-1693

This procurement is a request for quotation issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the acquisition of two axial piston pumps, identified by NSN 4320015236824. The delivery is required within 257 days after order, with a specified need ship date of July 25, 2027. Shipping is FOB Origin, with the destination for both inspection and acceptance located at DLA Distribution San Joaquin in Tracy, California. This solicitation is not a small business set-aside and explicitly prohibits the use of additive manufacturing for the produced items. The contract incorporates strict technical and quality requirements, including adherence to the DLA Master List and specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various Federal Acquisition Regulations, such as the Buy American Act and DFARS cybersecurity reporting standards. Offerors must submit quotes via DIBBS and provide necessary representations regarding their socioeconomic status and the origin of materials used.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-U-0804

Solicitation SPE7M1-27-U-0804 is a Total Small Business Set-Aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of spring-loaded shaft seal assemblies, identified as NSN 4320012760822. This critical application item is being sought as a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars and an estimated annual quantity of 44 units. Approved part numbers include Technetics Group Chicago LLC P/N LO-8502 Rev D and Dover Pumps and Process Solutions Segment P/N 331488. The delivery timeline is 90 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award is based on the price quoted for the estimated annual demand and may be eligible for automated award. Compliance with various FAR and DFARS clauses is required, including those regarding the Buy American Act, cybersecurity safeguarding of covered defense information, and combating trafficking in persons.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 20 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 20 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 20 hours ago

DEADLINE

HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

VACUUM PUMP UNIT, RO

Solicitation # SPE7M1-26-T-199S

Defense Logistics Agency

POSTED

DEADLINE

PUMP, HAND, FUEL PUMP

Solicitation # SPE7LX26FB2XB

Defense Logistics Agency

POSTED

DEADLINE

HOUSING, LIQUID PUMP

Solicitation # SPE7MX26F019V

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, CAM ACTUATED

Solicitation # SPE7L126FAJZ8

Defense Logistics Agency

POSTED

DEADLINE

Supply of Axial Pump Unit (NSN 4320-00-174-5811)

Ok DLA Aviation At Oklahoma City

POSTED

CLOSED

43--HOUSING,LIQUID PUMP

Solicitation # SPE7M1-26-P-5224

Defense Logistics Agency

POSTED

DEADLINE

43--SPINDLE ASSEMBLY

Solicitation # SPE7M1-26-T-237U

Defense Logistics Agency

POSTED

DEADLINE

USNS ROBERT E. PEARY - Bearing Housing

Solicitation # N3220526Q7237

POSTED

CLOSED

about 2 months ago

43--PUMP,CENTRIFUGAL

Solicitation # SPE7M1-26-T-241X

Defense Logistics Agency

POSTED

DEADLINE

43--PUMP,HYDRAULIC RAM,

Solicitation # SPE7M1-26-V-112R

Defense Logistics Agency

POSTED

DEADLINE

Supply of Multiple Fluid Pressure Line Connectors

FLUID HANDLING DIVISION

POSTED

CLOSED

about 2 months ago

Manufacturer of NSN 4320-01-251-7610

MARITIME SUPPLY CHAIN

POSTED

CLOSED

about 2 months ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS