Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PUMP, SPECIAL

Active
SPE7M2-26-T-5686Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a high-pressure 6-port valve identified as PUMP, SPECIAL with NSN 4320-01-605-5022 and part number 061961 from DIONEX CORPORATION DBA 21248. Three units are required to be delivered within 165 days of contract award, with delivery made FOB origin and no tolerance for quantity variance. The item is classified as a critical application item, and all supplies must comply strictly with DLA packaging requirements and MIL-STD-2073-1E for preparation, including specific packaging methods, materials, and unit container codes. Marking follows MIL-STD-129 with no special marking required, and palletization must adhere to DLA’s packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in limited, explicitly approved cases such as batteries, fluorescent lights, sensors, or weapon systems specified by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. All materials must also conform to the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract is governed by solicitation number SPE7M2-26-T-5686 with a required ship date of January 12, 2027, and original delivery deadline of April 21, 2027. The contracting office is the Nuclear Reactor Program under the Department of Defense, with David Larsen as the primary point of contact.

General Info

Procure three high-pressure 6-port valves per DLA specs, delivered FOB origin by April 21, 2027, to New Cumberland, PA, no mercury except approved cases.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-5686 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PUMP,SPECIAL
VALVE, HIGH-PRESSURE, 6-PORT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
DIONEX CORPORATION DBA 21248 P/N 061961
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017520008 0001 EA 3.000
NSN/MATERIAL:4320016055022
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M2-26-T-5686
SECTION B
PR: 7017520008 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/12/2027 Original Required Delivery Date:04/21/2027
SPE7M2-26-T-5686 NSN/Part Number: 4320-01-605-5022 Quantity: 3 EA Purchase Request: 7017520008QTY: 3 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
PUMP, CENTRIFUGALThe contract pertains to the procurement of one centrifugal pump with NSN 4320-01-655-3039 and part number 12595511 from BIRDON AMERICA INC, issued under solicitation SPE7M0-26-T-016U. The item is classified as a TYPE 2 (CODE 7) with a 36-month extendable shelf life, requiring strict compliance with MIL-STD-2073-1E packaging standards, including preservation method 31, cushioning material JC, and specific container codes. Delivery must occur within five days of contract award, FOB origin, with no variance allowed in quantity and inspection and acceptance taking place at the destination. The pump must be marked per MIL-STD-129 with no special marking codes and palletized per DLA packaging requirements. Shipping must be conducted via traceable freight, explicitly prohibiting parcel post, to the designated delivery point at Fort Leonard Wood, Missouri, with the shipment reference W58QRC and designated for the USA Engineer School. The required delivery date is July 22, 2026, and the contract is subject to the latest revision of the DLA Master List of Technical and Quality Requirements as of the solicitation issuance date. The point of contact is Grace Beck, and the solicitation was posted on July 21, 2026, with responses due by August 3, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
Federal
125 HP- 4300 Vertical Inline PumpThe Department of Defense, through the contracting office at Patrick Air Force Base, Florida, is seeking information from potential suppliers for the procurement of one 125 HP, 4300 Vertical Inline Pump, specifically an Armstrong or equivalent model, to support critical HVAC cooling operations. This action is designated as a Sources Sought notice under NAICS code 333996 and is structured as a Total Small Business Set-Aside under FAR 19.5, with particular interest in Service-Disabled Veteran-Owned Small Businesses. The pump must be a complete, fully operational system with specific technical attributes including 8x8x15 inch dimensions, bronze wetted parts, a 416 stainless steel shaft, bronze wear ring, TEFC motor with Class F insulation, shaft grounding, and an insulated non-drive side bearing. It is designed for constant volume operation with a Variable Frequency Drive and carries a first-year parts-only warranty. All responses must reference RFQ FA2521-26-Q-B090 and be submitted electronically by 12:00 PM Eastern Time on July 1, 2026, to the designated points of contact. Interested parties must be registered in the System for Award Management and provide their DUNS number, CAGE code, SAM registration expiration date, and any applicable GSA contract details. Proposed submissions must not exceed five pages and must include a company profile detailing annual revenues and employee size, business status identification such as SDVOSB, WOSB, HUBZone, 8(a), or EDWOSB, a description of teaming arrangements with clear delineation of prime and partner responsibilities, experience with at most three past government or commercial references including contact information and contract numbers, and a proposed pricing schedule for potential future use. The notice explicitly states that no solicitation currently exists and responses will not form a binding contract, serving solely to inform future acquisition planning. The government will evaluate responses to determine market interest and capability before issuing a formal solicitation, with performance to occur at Patrick Air Force Base, Florida, should a contract be awarded.
FA2521 45 Cons Pk

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
Hydraulic Ram Pump Supply (NSN 4320-00-303-1088, Part P307-2)The contract involves the supply of hydraulic ram pumps under the military National Stock Number NSN 4320-00-303-1088 and part number P307-2, with order quantities ranging between 200 and 599 units per delivery. All units must fully comply with military specifications for performance, packaging, and marking to ensure interoperability and logistics readiness within Department of Defense systems. Delivery is structured under FOB origin terms from Menomonee Falls, Wisconsin, meaning the buyer assumes responsibility for transportation and associated costs once the goods are loaded at the supplier’s facility. The contract is classified as a subcontract under NAICS code 333996, which pertains to other commercial and service machinery manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 20, 2026, and the award information is accessible through the DIBBS system under contract number SPE7MX24D5017.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 333996
New
DIBBS
Repair Overhaul Kit (ROK) Manufacturing and AssemblyThe contract calls for the full production, assembly, and testing of 148 units of the Repair Overhaul Kit RP001, encompassing all stages from component sourcing and procurement to final quality control and packaging. The work must be performed in accordance with stringent manufacturing standards, ensuring each unit meets required specifications for functionality and durability. The project is structured as a subcontract under a Total Small Business Set-Aside designation, which reserves the opportunity exclusively for small businesses as defined by the SBA, with the NAICS code 333996 indicating classification under Other General Purpose Machinery Manufacturing. The place of performance is fixed at New Cumberland with a zip code of 17070-5002, and all deliverables are expected to be completed within the response deadline of August 2, 2026, following a posting date of July 20, 2026. The contracting entity is the Department of Defense through the Maritime Supply Chain organization, underscoring the defense-critical nature of the kit and the need for reliable, secure, and compliant production.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
Centrifugal Pump Unit SupplyThe contract involves the supply of one centrifugal pump unit identified by NSN 4320-01-725-3802, fully compliant with Defense Logistics Agency technical specifications. The unit must undergo rigorous product verification testing to ensure it meets all required performance and safety standards, and it must be marked in accordance with MIL-STD-130 for proper identification and traceability throughout the supply chain. Delivery is arranged on a FOB origin basis, meaning the supplier is responsible for all costs and risks until the product leaves their facility, after which title and responsibility transfer to the buyer. The contract falls under NAICS code 333996, classifying it as other commercial and industrial machinery and equipment manufacturing, and is structured as a subcontract within the Department of Defense procurement framework. The award is managed by the Defense Logistics Agency with a posting date of July 20, 2026, and performance is tied to the supplier’s location without a specified place of delivery beyond the origin point.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 333996
New
DIBBS
REPAIR OVERHAUL KITThe contract is for a Repair Overhaul Kit identified by NSN 4320-01-507-7990, with a firm fixed price and zero variance in quantity, requiring exactly 148 units to be delivered within 30 days after award. All supplies must comply with DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and labeling in accordance with MIL-STD-129, and palletization must follow DLA procurement guidelines. The item is designated as a critical application, and strict prohibition exists against intentional addition or direct contact of mercury or mercury compounds unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, weapon systems, or specified reagents, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The solicitation is a total small business set-aside under NAICS code 333996, with a response deadline of August 2, 2026, and technical and quality requirements are governed by the DLA Master List referenced in the document. The contracting officer is Brandon McNeely, and transportation protocols follow DLA procedural notes C19 and C20. The required delivery date is November 26, 2026, tied to purchase request 7016690309.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTRThis contract pertains to the procurement of a centrifugal pump impeller, specifically identified by part number 657C1313-0950B517A and NSN 4320-01-259-1587, with a requirement for four units to be delivered within three days after order placement. The delivery is FOB origin, and inspection and acceptance occur at the destination, with packaging strictly required to comply with MIL-STD-2073-1E and MIL-P-10603, including preservation methods and labeling per MIL-STD-129. No special markings are required, and palletization must adhere to DLA packaging standards. The impeller is designated as a critical application item and must not contain or come into direct contact with mercury or mercury compounds, except under specific exemptions for batteries, fluorescent lamps, instrument controls, and naval-specified reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment in accordance with NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M4-26-T-270K, with a response deadline of July 31, 2026, and an original delivery date of October 27, 2026, though the need ship date is set for August 4, 2026. Final delivery must be sent to the DLA Distribution San Joaquin facility in Tracy, CA, with contact details and transportation instructions provided in applicable DLA procedural notes.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
PUMP, AXIAL PISTONSThis contract is for the procurement of nine axial piston pumps with NSN 4320014525670 and part number 8444226 from JLG Industries, Inc., under solicitation SPE7M1-26-T-219M. The unit of issue is each, at a fixed price of $9.00 per unit, totaling $81.00, with no variance allowed in quantity. Delivery is required FOB origin within 217 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements supersede this standard, and all items must be marked and labeled in accordance with MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement, and the Unit of Issue and Quantity per Unit Pack must align precisely with the contract terms. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is March 6, 2027. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. The item is designated a critical application item, and all government identification must be removed from non-accepted supplies. The contract is governed by the DLA Master List version in effect on the solicitation issue date, and all technical and quality specifications referenced by R or I numbers are incorporated by reference. The contracting activity is the Department of Defense, Maritime Supply Chain, with Michael Reese listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333996
New
Federal
43--REPAIR OVERHAUL KITThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for a Repair Overhaul Kit with NSN 4320015077990 under solicitation number SPE7M126Q1270, with a total quantity of 148 units to be delivered to W1A8 DLA Distribution within 30 days of award. The procurement is a total small business set-aside under NAICS code 333996, open only to responsible small business concerns, and quotes must be submitted electronically via the SAM.gov portal before the August 2, 2026 deadline. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided; interested parties must access the RFQ through the official link. The approved source for this item is identified as 07524 957420. All responses must be received by the stated deadline to be considered, and inquiries should be directed to the designated point of contact email listed in the solicitation. The contract will be awarded to a qualified small business located in Columbus, Ohio, with performance delivery expected at the specified DLA distribution location.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
Federal
43--IMPELLER,PUMP,CENTRThe contract is for the procurement of four impellers for centrifugal pumps, identified by NSN 4320012591587, to be delivered to DLA District San Joaquin with an expected delivery timeline of three days after award. The only approved source for this item is supplier 63857 with part number 657C1313-0950B517A. This solicitation, issued under reference number SPE7M426T270K, is a request for quotation that must be submitted electronically through the designated online portal; hard copies areNot available and no technical specifications, plans, or drawings are provided. All responsible suppliers may respond, provided their quotations are received by the deadline of July 31, 2026. The procurement falls under NAICS code 333996 and is managed by the Department of Defense through the DLA Land and Maritime office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and further details can be accessed through the official SAM.gov link or the DIBBS solicitation search portal.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
Hydraulic Pump Manufacturing and SupplyThe contract requires the manufacture, testing, packaging, and delivery of four hydraulic pumps that meet the National Stock Number 4320015618650 and adhere to all specifications outlined by the Defense Logistics Agency, including strict compliance with NAVSEA 5100-003D to ensure the pumps are mercury-free and conform to MIL-STD-2073-1E packaging standards for military shipment and storage. The work must be accomplished by a small business as this is a total small business set-aside under FAR 19.5, classified under NAICS code 333996 for other commercial and industrial machinery and equipment manufacturing, and the offering is structured as a subcontract opportunity through the Department of Defense’s Maritime Supply Chain organization. All submissions are due by August 3, 2026, with the solicitation originally posted on July 19, 2026, and performance is expected to fulfill federal military logistics requirements without specifying a fixed place of performance beyond the need for DLA-compliant delivery.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 333996
New
DIBBS
PUMP, HYDRAULICThis contract, issued under solicitation number SPE7M1-26-U-4478 by the Department of Defense’s Maritime Supply Chain through DLA Land and Maritime, is a Small Business Set-Aside for the procurement of four hydraulic pumps with NSN 4320015618650. Deliveries are required within 96 days of award, with FOB Origin terms placing transportation responsibility and risk transfer on the contractor prior to shipment. The contract is structured as an Indefinite Delivery Contract (IDC) with a base quantity of four units and a maximum potential value of $350,000, though the unit price is not specified in the current solicitation. All items must comply with MIL-STD-2073-1E for packaging and preservation using aluminum foil and desiccant with cling film and dry environment controls, and marking must adhere to MIL-STD-129 with standardized barcoding and the pack code U; palletization must conform to DLA’s RP001 requirements. The contract strictly prohibits intentional addition of mercury or mercury-containing compounds to any supplied hardware, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Hazardous materials must be labeled in compliance with 29 CFR 1910.1200, and the contractor must disclose all such materials prior to award. The contractor must also comply with federal cybersecurity requirements including NIST SP 800-171, safeguarding covered defense information, and reporting cyber incidents under the DFARS clause 252.204-7012, while affirming representations on small business status, UEI and CAGE codes, and compliance with anti-trafficking, employment verification, and sustainable procurement mandates. Payment must be submitted exclusively via WAWF, and inspection and acceptance occur at destination. The contract includes provisions for accelerated payments to small business subcontractors, restrictions on arbitration agreements, whistleblower protections, and prohibitions on acquiring items from Communist Chinese military companies or using hexavalent chromium. Offerors must submit electronically via DIBBS by August 3, 2026, and are expected to demonstrate full compliance with all technical, quality, safety, and regulatory standards outlined across multiple FAR and
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 333998
New
DIBBS
THREAD, PIECEThe item specified is a THREAD, PIECE with NSN 1720-00-602-0997, quantity of 25 units, under Purchase Request 7017528515, with a delivery deadline of 162 days ADO. This procurement is governed by strict DLA packaging requirements and requires the contractor to be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. The technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons regardless of location, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, are authorized to access the controlled data. The solicitation number is SPE7M2-26-T-5700, posted on July 21, 2026, with responses due by August 3, 2026. The contracting organization is the Department of Defense’s Nuclear Reactor Program, with performance to be delivered to New Cumberland, PA, 17070-5002. Alisha Blanton is the primary point of contact for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
SWITCH, PUSHThis contract pertains to the procurement of a PUSH SWITCH designated as NSN 5930-01-327-0031, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). The item must be sourced exclusively from an approved supplier as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with Offerors required to provide documentation proving source approval, such as a letter from NAVICP’s Engineering and Product Support Directorate. Serialization and full traceability are mandatory for every unit and its packaging, including scrappage records, and any attempt to rebrand or obscure original OEM markings is strictly prohibited. The item must comply with stringent technical and quality standards referenced from the DLA Master List, including SAE AS9100 for quality management, and must be marked per MIL-STD-129 with specific identifiers including contract number, NAWC CAGE code, part number, lot number, and manufacturer CAGE code. No ozone-depleting chemicals may be used, and mercury or mercury compounds are banned unless explicitly exempted for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs, and non-conformances must result in zero acceptance unless contractually altered. The contractor must submit Production Lot Test reports, a Production Test and Inspection Report, and a Certificate of Quality Compliance; the Certificate of Conformance clause is not permitted. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, marked with special codes and palletized appropriately, with all items delivered FOB origin and inspected and accepted at origin. Delivery is scheduled for 338 days after contract award, with a firm fixed price and no quantity variance allowed. The item is part of a total small business set-aside, and all documentation referencing technical data, quality assurance provisions, and engineering drawings must be current and authoritative, with source-controlled drawings dictating marking and configuration requirements even if other sources are listed.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339991
New
DIBBS
GROMMET, NONMETALLICThe contract specifies the procurement of 6,250 nonmetallic grommets identified by NSN 5325-00-276-4204 under solicitation SPE7M2-26-Q-0657, with a firm fixed price and no variance allowed in quantity. Delivery is required within 250 days after order date, with FOB origin and inspection and acceptance occurring at the destination. All items must comply with the current revision of the governing industry standard NASM3036, Revision 3 dated December 31, 2024, and manufacturing must align with this standard from the solicitation date forward; prior revisions are acceptable only for previously produced hardware. The grommets must be packaged and preserved in strict accordance with MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special markings required. Mercury or mercury compounds are strictly prohibited in any part of the product, packaging, preservation, or marking, except for incidental functional uses in specific exempted items like batteries or instruments, which must include secondary containment. Packaging must use nonmetallic materials, with unit containers holding 100 pieces, packed in intermediate containers designated E5 and marked using the U pack code. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation details are governed by DLA procedural notes C19 and C20. The item is needed by November 5, 2027, and the point of contact for the contract is Hunter Steele of the Department of Defense’s Nuclear Reactor Program.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract specifies the procurement of a PUSH SWITCH with the NSN 5930-01-170-8298 and part number 621822-1, subject to strict technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The item must comply with hazardous material restrictions, including a complete prohibition on intentional addition of mercury or mercury-containing compounds unless used in approved functional applications such as batteries, fluorescent lamps, sensors, weapon systems, or naval-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The switch must meet NAVAIR aircraft launch and recovery equipment traceability standards, with bare item markings required to display the contract number, NAWC CAGE 80020, and part number unless superseded by technical drawings. MIL-STD-130 and MIL-STD-129 apply for marking, and packaging must adhere to MIL-STD-2073-1E and MIL-DTL-28786 for switches. Use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing stages without explicit written approval from the contracting officer, and this restriction overrides any conflicting specifications. The item is classified as a critical application item for use in avionics systems under the specification SPE7M2-26-T-5702, with technical data package revisions tied to reference drawings 80020 621822 and 80020 519780. The contract is a total small business set-aside with a delivery requirement of 619 days from award, FOB origin, and inspection and acceptance at destination. The order quantity is 26 units at $26.00 each, totaling $676.00. Packaging must follow the preservation and marking codes outlined, with no special marking required. Shipping and delivery are to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of April 14, 2028.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
CABLE, POWER, ELECTRIThe contract specifies the procurement of 11,676 feet of special-purpose electrical cable, identified by NSN 6145-01-082-3384, with a firm fixed price and zero variance allowance on quantity. The cable must conform to the technical and quality requirements referenced by R and I numbers from the DLA Master List, and it is subject to configuration change management under RQ002. The product is designated as a critical application item and must meet the NEMA WC 27500-2025 Rev D standard with part number M27500-22RC2S09. The cable must be supplied in continuous length depending on the advice code—2N, 28, or 34 require uninterrupted lengths, while 2P or 39 allow multiple unit packs, with advice code requirements overriding any conflicting schedule data. Qualified manufacturers listed on the QPL at award time are acceptable, and preservation and packaging must comply with MIL-DTL-12000 and MIL-STD-2073-1E, with marking per MIL-STD-129. Delivery is due 150 days after award to Robins Air Force Base in Georgia, with inspection and acceptance occurring at destination. The contract is issued under solicitation SPE7M2-26-Q-0656, with a response deadline of July 28, 2026, and the materials are required for use by the Department of Defense’s Nuclear Reactor Program.
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSEThis contract is for the procurement of CLAMP, HOSE with NSN 4730-00-908-6294 under solicitation SPE7M2-26-Q-0659, requiring a total quantity of 2,729 units delivered in two lots: 980 units and 1,749 units, respectively. All items must conform to technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The contract mandates strict adherence to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging and palletization protocols, with no special marking permitted. Items must be shipped FOB origin with a firm fixed price and a delivery timeframe of 150 days after order date, arriving at designated DLA distribution depots in Hill AFB, Utah, and New Cumberland, Pennsylvania. Zero tolerance is enforced for quantity variance, and inspection and acceptance occur at the destination. The product is designated as a critical application item and must comply with TDP Revision B Generation 3 per CID A-A-52506E and SAE J1508. Mercury or mercury-containing compounds are prohibited unless specifically exempted, such as in functional batteries, fluorescent lights, sensors, weapon systems, or approved reagents; portable mercury-containing devices must include a second containment boundary. All deliveries must follow DLA transportation procedures C19 and C20, and the contract supports full and open competition with no set-aside restrictions.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTORThe contract is for a starter motor identified by NSN 6110-01-196-6385, with a quantity of four units, under purchase request 7017527755. The solicitation number is SPE7M2-26-T-5701, posted on July 21, 2026, with responses due by August 3, 2026, and delivery is required 451 days after order. The item falls under NAICS code 334519 and is procured by the Department of Defense through the Nuclear Reactor Program. Performance is to occur in New Cumberland, Pennsylvania, zip code 17070-5002, with Alisha Blanton as the primary point of contact. Critical to this contract is the export control classification of the associated technical data, which is subject to either ITAR or EAR regulations. Disclosure of this data to foreign persons, including foreign nationals within the United States or overseas, is restricted without prior authorization from the Department of State or Commerce. Only DLA contractors with an approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and approved access through the DLA authority may receive this technical data. DFARS 252.225-7048 governs compliance with these restrictions.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
PACKING, STEAMThis contract is for the procurement of Aircraft Launch and Recovery Equipment (ALRE) Critical Application Items requiring strict adherence to traceability, serialization, and configuration control standards. All parts must be serialized and lot-numbered for full traceability throughout their lifecycle, including scrap material, and any re-branding that obscures original OEM markings such as part number, serial number, or CAGE code is strictly prohibited. The contractor must comply with MIL-STD-129 for item marking, including contract number, NAWC CAGE code, part number, and manufacturer details on every unit pack. Serialization must be feasible given the part’s size or material; if not, the DLA Contracting Officer must be notified at quote time. The item is subject to NAVAIR ALRE traceability requirements, and any conflict between general instructions and technical drawings must be resolved in favor of the drawing specifications. Source approval is mandatory and must be granted by NAWC Aircraft Division Lakehurst per the NAVICP Source Approval Information Brochure, requiring either a formal approval letter from NAVICP’s Engineering and Product Support Directorate or equivalent qualifying evidence. The contract imposes stringent technical and quality requirements derived from the DLA Master List, including compliance with SAE AS9100 for quality management and prohibition of Class I ozone-depleting chemicals and intentional use of mercury or mercury compounds—except for designated exemptions like batteries, fluorescent lamps, and specialized instruments, which must be shockproof with secondary containment. Technical data associated with the item is subject to ITAR or EAR export controls, restricting access to entities with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and DLA authorization. Configuration changes require formal Engineering Change Proposal approval, and any variance, deviation, or waiver must be submitted to the DSC Contracting Officer for review. The item is a restricted-source product, and the contractor must meet all source approval criteria, potentially including a government participation survey prior to award. Delivery requirements specify 28 feet of material to be delivered within 278 days of award under solicitation SPE7M2-26-Q-0651, with performance location in New Cumberland, PA, and primary point of contact at DLA.

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
CAP, CYLINDER ASSYThe contract is for the procurement of three CAP, CYLINDER ASSEMBLY units with NSN 1720-00-481-4177 under solicitation SPE7M2-26-Q-0655, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 781 days from award and the response deadline for submissions is July 31, 2026. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is treated as an export and requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such data. The point of contact for this solicitation is Victoria Payne, and the place of performance is specified as San Diego, CA, with the solicitation posted on the DIBBS system.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334413
New
DIBBS
FUSE, CARTRIDGEThe contract is for the procurement of 111 cartridge fuses with NSN 5920-00-821-0078, sourced under solicitation SPE7M2-26-T-5699, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 161 days of contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific packaging methods, cushioning, and containment standards. Marking must adhere to MIL-STD-129 with no special marking required. The fuses must not contain mercury or mercury compounds except in approved functional applications such as batteries or instrument controls, and any portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Authorized suppliers are General Electric Co. with part number 6293011G8 and Cooper Bussmann, LLC with part number JCW1E. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 12, 2027, and an original delivery deadline of February 26, 2028. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract is subject to federal procurement regulations, with a response deadline of August 3, 2026, and is classified under NAICS code 334413 for electrical equipment manufacturing.
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
HANDWHEELThe contract is for the procurement of six handwheels under NSN 5340-01-313-9712, with a delivery deadline of 114 days after award. The solicitation number is SPE7M2-26-T-5269, issued on July 21, 2026, with responses due by July 24, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and all non-accepted supplies must have government identification removed in accordance with RQ011. Item marking must meet MIL-STD-130N, dated November 16, 2012, ensuring identification data is sufficient and not proprietary for competitive procurement. The place of performance is Bremerton, Washington, 98314-6001, and the contracting agency is the Department of Defense under the Nuclear Reactor Program. Primary point of contact is David Larsen, reachable at david.larsen@dla.mil or 392-693-9041. The NAICS code is 332510, indicating classification under Machine Shop; Turned Product; and Screw Machinery and Equipment Manufacturing.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
RUBBER SHEET, SOLIDThe contract specifies the procurement of 23 square yards of solid rubber sheet with NSN 9320-01-276-6893 under solicitation SPE7M2-26-Q-0660, issued by the Department of Defense’s Nuclear Reactor Program. Delivery is required within 150 days after award, with a response deadline of July 31, 2026, and the place of performance is set at New Cumberland, Pennsylvania, 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Additionally, the item includes technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and questionnaire, and received explicit approval from DLA. Removal of government identification from non-accepted supplies is mandatory, and all correspondence must be directed to Kevin Erickson at the provided contact information.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details