This Government Contract opportunity from Department Of Defense was posted on April 29, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Notice of Intent

Closed

N0010425QJB34Federal

Submission Closed05/05/2025, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333914

New

DIBBS

Centrifugal Pump Unit (NSN 4320016774591)This subcontract, managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the Department of Defense, involves the procurement of one centrifugal pump unit for the USS CHARLESTON (LCS 18). The required hardware must be Weber Industries Inc DBA Webtrol part number NV25B4FE3T and strictly adhere to NSN 4320016774591 specifications. The agreement mandates full NDAA compliance concerning covered defense telecommunications equipment. Delivery of the completed pump unit is to be handled via FOB Origin, with the place of performance located at FPO 96694. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Cylinder and Plunge Assembly SupplierThis subcontract involves the manufacture or sourcing of seven Cylinder and Plunge Assemblies for prime contractors supporting Department of Defense supply contracts. The hardware must strictly adhere to the technical specifications for NSN 4930009674829 and comply with the Buy American Act, the Berry Amendment, and mercury-free restrictions. Performance of the contract will take place in Tracy, California. To be eligible, suppliers must meet rigorous cybersecurity standards, including a CMMC Level 2 Self-Assessment and compliance with NIST SP 800-171. The opportunity was posted on October 28, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 333914 and is managed through Construction & Equipment MRO SVC I.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Fabrication and Assembly of Manhole Closure AssembliesThis subcontract involves the fabrication and assembly of 29 manhole closure assemblies, specifically NSN 4930-01-420-7874, for prime contractors supporting DLA Troop Support projects. The contractor must adhere to all technical and quality requirements specified in the DLA Master List, with strict compliance required for the Buy American Act and the Berry Amendment. Packaging and marking must follow ASTM D3951, RP001, and MIL-STD-129 standards. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 333914. Completed assemblies are to be delivered FOB Origin to DLA Distribution Red River in Texas. The response deadline for this Department of Defense requirement is November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PUMP UNIT, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1713

Solicitation SPE7M1-27-T-1713 is a small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one centrifugal pump unit, identified by NSN 4320010862873. The required delivery date is October 23, 2026, with a delivery timeframe of 10 days after receipt of order. The item is to be delivered FOB Origin to Fort Buchanan, PR, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, specifically prohibiting the use of plastic packaging materials. Technical and quality requirements are governed by the DLA Master List, and the contractor must comply with the Buy American Act and Berry Amendment domestic sourcing restrictions. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates comprehensive DFARS requirements regarding cybersecurity reporting, the prohibition of certain telecommunications equipment, and the handling of hazardous materials.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0284

Solicitation SPE8EE-27-T-0284 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manufacturing and Construction, for the procurement of 17 right-hand hose reel assemblies under NSN 4930-01-175-1425. The requirement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside with a NAICS code of 333914. Delivery is required within 82 days after receipt of order, with a need ship date of January 31, 2027, and a final delivery destination of Texarkana, Texas. The contract is FOB Origin, with both inspection and acceptance occurring at the destination. The procurement is subject to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Palletization must adhere to RP001 requirements. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment processing. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions. Quotations must be submitted via DIBBS by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ADAPTER, PRESSURE FUEL

Solicitation # SPE8EE-27-T-0333

Solicitation SPE8EE-27-T-0333 is a Department of Defense procurement issued by the Defense Logistics Agency for 10 units of Pressure Fuel Servicing Adapters, identified by NSN 4930-01-588-1020. This HUBZone set-aside acquisition requires delivery within 135 days after order, with a need ship date of March 25, 2027, and an original required delivery date of April 8, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is managed by Philip Ferrara at DLA Troop Support.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0287

Solicitation SPE8EE-27-T-0287 is a small business set-aside issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 14 units of hose reel drums (NSN 4930-01-203-7774). The requirement strictly mandates new, unused, and non-refurbished material. Vendors who are not the original equipment manufacturer must provide documentation from an authorized distributor verifying the product is genuine OEM material. The delivery lead time is 91 days after award, with a required delivery date of March 15, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract incorporates rigorous quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with RP001 requirements, specifically utilizing government or wing tip pallets. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment. Evaluation factors emphasize technical compliance and material condition, with price preferences available for HUBZone, SDVOSB, and WOSB concerns. All quotations must be submitted through the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

LUBRICANT PACKER, BEARI

Solicitation # SPE8EE-27-T-0265

Solicitation SPE8EE-27-T-0265 is a fixed-price request for quotations issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of 14 units of Lubricant Packer, Bearing (NSN 4930-00-052-1764). The requirement falls under NAICS code 333914 and is managed under the First Destination Transportation program with shipping terms set as FOB Origin. Delivery is required within 167 days after the order, with a need ship date of April 26, 2027, and a destination of DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification and MIL-STD-129 for shipment marking. Packaging must comply with MIL-STD-2073-1E and DLA requirement RP001, with specific instructions to apply P-19 preservative to exterior bare ferrous metal surfaces. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Evaluation of offers requires a complete data package, and the government will not consider items produced via additive manufacturing. Additionally, the procurement incorporates various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and HUBZone price evaluation preferences. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

CLOSURE ASSEMBLY, MANHO

Solicitation # SPE8EE-27-T-0293

Solicitation SPE8EE-27-T-0293 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of 29 units of Manhole Closure Assemblies (NSN 4930-01-420-7874). The requirement is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333914. Delivery is required within 167 days after the order date, with a specified need ship date of April 26, 2027. The items are to be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas, where both inspection and acceptance will occur. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, with packaging following ASTM D3951 and RP001 standards and marking complying with MIL-STD-129. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and specific cybersecurity protocols for safeguarding covered defense information. Quotations must be submitted to the issuing office in Philadelphia by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-9435

Solicitation SPE7M0-26-T-9435 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Maritime Supply Chain ESOC Buys, for the procurement of one pump shaft sleeve identified by NSN 4320-01-123-0197. The requirement specifies a delivery timeline of five days after the order is placed, with the destination and acceptance point located at W8VP NJ ARNG CSMS 1 in Manchester, New Jersey. The procurement is categorized under NAICS code 333914 and includes specific approved part numbers from Curtiss-Wright Electro-Mechanical. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence over ASTM standards. Palletization must follow RP001 requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and prohibitions on the acquisition of certain telecommunications equipment. Evaluation for award will consider the HUBZone price evaluation preference, and offers utilizing additive manufacturing are ineligible unless specifically authorized.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

SPIDER, SWITCH HOUSING

Solicitation # SPE8EE-27-T-0280

Solicitation SPE8EE-27-T-0280 is issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 31 units of Spider, Switch Housing (NSN 4930-01-176-1204). The contract is categorized under NAICS code 333914 and utilizes the First Destination Transportation program to optimize shipping costs via Government-Arranged Transportation. Delivery is required within 167 days after the order, with a specified original delivery date of February 15, 2027, and a need ship date of April 26, 2027. The place of performance and delivery is Tracy, California, with FOB terms set to origin. The procurement is subject to rigorous quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and specific restrictions prohibit the intentional addition of mercury to hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The contract incorporates various FAR and DFARS clauses, including those for safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8EE-27-T-0348

Solicitation SPE8EE-27-T-0348 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of 75 fuel and oil servicing nozzles under NSN 4930-01-661-7722. The requirement is designated as a total small business set-aside under FAR 19.5, with a delivery timeline of 167 days after receipt of order. The place of performance is located in New Cumberland, Pennsylvania, and the shipping terms are established as FOB Origin. The contract mandates strict adherence to technical and quality requirements outlined in the DLA Master List, specifically RA001, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled according to MIL-STD-129, and palletization must comply with RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Additionally, the contractor must comply with various DFARS regulations regarding the Buy American Act, cybersecurity reporting under 252.204-7012, and prohibitions on covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 11 days

AI Contract Overview

This contract pertains to the procurement of a centrifuge pump unit, with the solicitation issued by the Navy's Naval Surface Warfare Systems Support in Mechanicsburg, Pennsylvania. The scope includes manufacturing the specified pump unit in accordance with government standards, with particular attention to design, marking, and change management processes. The contract emphasizes strict quality assurance responsibilities, requiring the contractor to perform inspections, maintain detailed records, and ensure all items meet specified requirements, including proper traceability and adherence to MIL-STD-130 for identification. The procurement process mandates that suppliers verify part numbers and NSNs before responding, and if not the manufacturer, they must provide authorization from the OEM. Delivery is FOB origin, with accelerated delivery encouraged, and the award will be bilateral, requiring written acceptance from the contractor. The contract also specifies packaging standards, inspection rights, and documentation procedures, including compliance with various applicable military standards and regulations. The response deadline for proposals is April 16, 2025, and interested parties can access further details through the provided SAM.gov link.

General Info

DoD Navy seeks 4 units of NSN 7HH 4320 015603514 parts, FOB Origin, response by May 5, 2025.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Set-Aside

NONE

Documents

N0010425QJB340001.pdf

N0010425QJB34.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

5 updates

PhaseClosed

PostedApr 1

Solicitation

Notice updatedApr 1

The notice description changed.

Notice updatedApr 18

Response deadline changed from Apr 16, 2025 to Apr 21, 2025. The notice description changed.

Notice updatedApr 18

The notice description changed.

Notice updatedApr 29

Notice type changed from Solicitation to Special Notice. Response deadline changed from Apr 21, 2025 to May 5, 2025. The notice title changed. NAICS code removed. The notice description changed. The point of contact changed.

Notice updatedApr 29

Notice type changed from Special Notice to Contract Update. The notice description changed.

Response DeadlineMay 5

Deadline has passed

Submission Closed

05/05/2025, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

Dakota Bentzel

contact@example.gov

Full Description

NSN 7HH 4320 015603514 TDP 003 Ref Nr: NSS3131-5/077862-8R Qty 4 EA, Delivery FOB Origin.\ The Government does not have adequate data needed to purchase/contract repair this part from additional sources. Interested may obtain copies of Military and Federal Specifications and Standards, Qualified Products Lists (QPLs), Qualified Product Databases (QPDs), Military Handbooks, and other standardized documents from the DoD Single Stock Point (DODSSP) at Document Automation and Production Service (DAPS) in Philadelphia, PA. \\NOTE: Pattern, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. \\Most documents are available in Adobe PDF format from ASSIST-Online at: http://dodssp.daps.dla.mil.\\Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software.\\Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures.\\Users who do not have access to the internet may contact the DODSSP ASSIST Help Desk at +1 (555) 000-0000 (DSN: 442-6396), or mail their request to DLA Document Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094.\\ Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.\\

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Notice of Intent

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open