Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Pump Unit Replacement Parts and Components

Active

Federal

Response Deadline11/02/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, involves the procurement of replacement parts, seals, gaskets, and internal components for the CTFGL Pump Unit, NSN 4320-01-575-8318. The selected provider is responsible for manufacturing or sourcing OEM equivalent parts in strict accordance with TDP Version 002, ensuring all physical identification meets MIL-STD-130, REV N standards. The primary objective of the contract is to provide certified replacement components to support a 35-day Ready Time Achievement Target. This opportunity falls under NAICS code 333914, with a response deadline set for November 2, 2026.

General Info

DoD subcontract for CTFGL Pump Unit replacement parts due by November 2, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QJA17.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP UNIT,CTFGL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 08:30:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies replacement parts, seals, gaskets, and internal components for PUMP UNIT, CTFGL (NSN 4320-01-575-8318) for prime contractors on Navsup Weapon Systems Support Mech projects. Manufactures or sources OEM equivalent parts per TDP Version 002. Ensures physical identification complies with MIL-STD-130, REV N. Delivers certified replacement components to support a 35-day RTAT.

Similar Contracts

Same NAICS industry code

QTPod M4000 Fuel Management Terminal SupplyThis subcontract, issued by the Department of Defense for FA2835 Aflcmc Hanscom Pzi projects, requires the supply of one brand-name QTPod M4000 automated fuel management terminal. The terminal must be equipped with a heavy-duty all-weather protective pedestal enclosure, an integrated payment card reader, a numeric keypad, an outdoor daylight-readable display, and a hardwired Ethernet interface. The provider is also responsible for furnishing all necessary manufacturer data and manuals. The contract is designated as a Total Small Business Set Aside under NAICS code 333914. Delivery of the terminal and pedestal is required FOB Destination to Hanscom AFB. The solicitation was posted on October 16, 2026, with a response deadline of November 6, 2026.

FA2835 Aflcmc Hanscom Pzi

POSTED

DEADLINE

Manufacture and Supply of Compressor Unit, REC (NIIN 015479404)This subcontract involves the manufacture and supply of three finished REC Compressor Units for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is required to produce the units in strict accordance with Technical Data Package Version 006 and Cage Codes 1SGJ6 and 5R450. Compliance with MIL-STD-130, REV N for physical identification and MIL-STD 2073 for packaging is mandatory. To be eligible, the provider must maintain status as an Authorized Distributor of the original manufacturer and ensure full compliance with DFARS Part 225. The project falls under NAICS code 333914 and is managed under the Department of Defense. Responses for this requirement are due by November 13, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

COMPRESSOR,ROTARY

Solicitation # N0010426QJC35

Solicitation N0010426QJC35 is a Request for Quotation issued by the Navsup Weapon Systems Support for the teardown, evaluation, repair, and modification of a Rotary Compressor (NSN 4310-01-485-0856). Issued under Emergency Acquisition Authority, the government is seeking a Repair Turnaround Time of 122 days, measured from the physical receipt of the asset to final government acceptance. The resulting contract will be a bilateral firm-fixed-price award, with award selection based on the lowest priced, technically acceptable offer. Key requirements include mandatory Government Source Inspection and adherence to MIL-STD-2073 for packaging and MIL-STD-130 for physical identification. The contractor must perform all testing and inspection according to original manufacturer specifications and maintain records for 365 days post-delivery. Freight is handled by the Navy as FOB Origin per the Commercial Asset Visibility Statement of Work. Additionally, the contractor must meet CMMC Level 2 self-certification requirements and utilize the Wide Area Workflow system for electronic invoicing and payment. Failure to meet the required turnaround time may result in price reductions per unit per month.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PLATE,COVER ASSY

Solicitation # N0010426QFG68

This fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, is for the procurement of a Cover Plate Assembly (NIIN 011953116) to be used in a crucial shipboard system. Due to the critical nature of the component, it is designated as Special Emphasis material (Level I), requiring strict adherence to quality control and certification procedures. The award will be made to a single, technically acceptable offeror based on a trade-off between price and past performance, with past performance weighted as more important. The delivery schedule is set for 365 days after the effective date of the contract, with terms specified as FOB Destination. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and provide a comprehensive Quality Control Manual to be eligible for award. Technical requirements include adherence to Ingersoll-Rand drawing 11181-D-18 and specific material certifications for Alloy C71500. Mandatory testing includes ultrasonic and dye penetrant inspections on forgings and after final machining. The contract requires First Article Testing and the submission of certification data via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard prior to shipment. All production and repair welding must be approved by the government and comply with S9074 and 0900-LP standards. Packaging and marking must follow MIL-STD-2073 and MIL-STD-129, and the order is designated as a DX rated order under the Defense Priorities and Allocations System.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

43--COMPRESSOR UNIT,REC

Solicitation # N0010425RJA71

This firm-fixed-price solicitation, issued by NAVSUP Weapon Systems Support Mech, seeks the manufacture of Compressor Unit, REC (NIIN 015479404) based on Technical Data Package version 006. The contract requires the items to be designed according to specific Cage Codes, including 1SGJ6 and 5R450. All deliverables must be physically identified per MIL-STD-130, REV N and packaged according to MIL-STD 2073. The government mandates that award consideration be given exclusively to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead. The contractor maintains primary responsibility for all inspection and quality assurance, though the government reserves the right to perform independent inspections. Quality records must be retained for 365 calendar days following final delivery. Proposals must be submitted via NECO or email by the extended deadline of November 13, 2026, at 4:00 PM local time. Evaluation will be conducted in accordance with DFARS Part 225, prioritizing U.S.-made, qualifying country, or designated country end products. Payment and invoicing are to be handled via Wide Area Workflow using a combined invoice and receiving report.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QJA16

Solicitation N0010427QJA16 is a request for quotations issued by the Navsup Weapon Systems Support Mech for the repair of a SEAL (NIIN: 015028298). The government is seeking a Repair Turnaround Time (RTAT) of 35 days, with the requirement that the contractor obtain final government inspection and acceptance within this window. Failure to meet the RTAT will result in a price reduction per unit per month. The contract is FOB Origin, with freight handled by the Navy via the Commercial Asset Visibility (CAV) system. Government Source Inspection (GSI) is mandatory, and all repaired items must meet the operational and functional requirements of the specified cage codes and reference numbers. The award will be made to a single eligible and responsible offeror based on the most advantageous combination of price and past performance, with past performance explicitly weighted as more important than price. The government may also utilize SPRS risk assessments to evaluate item, price, and supplier risk. Key compliance requirements include adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for packaging. The solicitation incorporates various FAR and DFARS clauses, including Buy American preferences and strict safeguarding of covered defense information. The government also intends to include an option for increased quantity under FAR 52.217-6.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PUMP UNIT,CTFGL

Solicitation # N0010427QJA17

This solicitation, number N0010427QJA17, is issued by the Navsup Weapon Systems Support Mech for the repair and quality maintenance of the PUMP UNIT, CTFGL (NSN 4320-01-575-8318). The government is seeking a Repair Turnaround Time (RTAT) of 35 days, measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. The contract is a fixed-price award that includes an option for increased quantity up to 100 percent of the initial item. Government Source Inspection (GSI) is required, and all freight is handled by the Navy on an FOB Origin basis. Award will be made to a single eligible and responsible offeror based on a best-value determination where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073 for preservation and MIL-STD-130 for physical identification. Failure to meet the required RTAT will result in a per-unit, per-month price reduction. Invoicing must be processed electronically through the Wide Area Workflow (WAWF) system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Hanscom Aero Club Automated Fuel Management System Replacement

Solicitation # 2027-PZI-1839

Solicitation 2027-PZI-1839 is a firm-fixed-price contract issued by the AFLCMC/PZIB at Hanscom Air Force Base, Massachusetts, for the replacement of an obsolete fuel management terminal at the Hanscom Aero Club. The project requires a contractor to provide all labor, materials, and technical expertise to decommission the existing QTPod M3000 terminal and pedestal and install and commission one new brand-name QTPod M4000 automated fuel management terminal. The estimated value of the project is 30,000 dollars, and it is designated as a 100 percent Total Small Business Set-Aside under NAICS code 333914. The contractor must utilize certified fueling technicians and ensure the system integrates with JPMorgan Chase Paymentech. Key compliance requirements include providing an active PCI Attestation of Compliance and submitting an ATO technical package within 10 days of award. All work, including installation and final acceptance testing, must be completed within 45 calendar days of the Notice to Proceed, with the physical on-site changeout limited to two consecutive business days. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, evaluating technical proposals on an acceptable or unacceptable basis before considering price. Quotes are due via email by 12:00 PM EST on November 6, 2026.

FA2835 Aflcmc Hanscom Pzi

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1022

Solicitation SPE7M1-27-T-1022 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for ten wearing rings designed for use with Warren Pump Model 24MFP. This requirement is designated as a total small business set-aside under NAICS code 333914. The primary deliverable is identified by NSN 4320011903569 and is classified as a critical application item. The original required delivery date is October 14, 2026, with a delivery timeframe of 20 days after the order. Shipping is to be handled as FOB Origin, with the final destination and acceptance point located in Poplar Bluff, Missouri. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001 requirements. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment for domestic sourcing. The point of contact for this procurement is Michael Reese.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

ARM, WOBBLER, CONTROL

Solicitation # SPE4A5-27-T-1222

Solicitation SPE4A5-27-T-1222 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of three units of the Arm, Wobbler, Control, identified by NSN 4320010274180 and Hamilton Sundstrand Corporation part number 717926. The requirement is designated as a critical application item. Delivery is specified as FOB Origin with a need ship date of April 13, 2027, and an original required delivery date of September 8, 2028. Inspection and acceptance will occur at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The contract incorporates stringent quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements. Key regulatory requirements include CMMC Level 2 Self-Assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for invoicing. While physical identification and bare item marking are required, Item Unique Identification is not necessary per the service customer. Quotations are due by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

PUMP UNIT, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1023

Solicitation SPE7M1-27-T-1023, issued by the DLA Weapons Support Maritime Supply Chain, seeks quotes for one centrifugal pump unit, NSN 4320-01-393-5921, manufactured by Johnson Pump of America (P/N 10-24504-04). This item is classified as a Navy Field Level Reparable item, requiring strict configuration control per MIL-STD-973. The successful contractor must deliver the unit within 20 days after order, with the place of performance and delivery located at Ft Richardson, Alaska. The procurement falls under NAICS 333914 and requires submission via the DIBBS system by October 26, 2026. The contractor is required to overpack one manufacturer's commercial manual including operation, services, maintenance, repair instructions, and a complete parts list. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA Packaging Requirements. Inspection and acceptance will occur at the destination. Payment shall be processed electronically through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal regulations, including the Buy American Act, Berry Amendment, and specific hazardous material labeling standards under 29 CFR 1910.1200.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

ADAPTER ASSEMBLY

Solicitation # SPE8EE-26-T-2695

Solicitation SPE8EE-26-T-2695, issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office, seeks quotes for 64 units of an Adapter Assembly under NSN 4930004739792. The procurement is conducted under NAICS 333914 with a required delivery date of February 17, 2027, and a need ship date of March 1, 2027. Delivery is specified as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The delivery timeline is set at 142 days after order. Technical compliance requires adherence to MIL-STD-130N for identification marking and the DLA Master List of Technical and Quality Requirements. Packaging must follow ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing. The solicitation includes a price evaluation preference for SBA-certified HUBZone Small Business Concerns and mandates the use of the Wide Area WorkFlow system for invoicing and payment. Compliance with the Buy American Act, Berry Amendment, and various cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012, is required.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

48--VALVE,REGULATING,FL, IN REPAIR/MODIFICATION OF

Solicitation # N0010427RZA02

POSTED

about 11 hours ago

DEADLINE

in about 2 months

Metallurgical and Mechanical Testing for Special Emphasis FastenersThis subcontract for the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves providing metallurgical and mechanical testing for special emphasis fasteners. The selected contractor will perform quantitative chemical and mechanical analysis, including thread verification per FED-STD-H28, production lot destructive testing, and Liquid Penetrant or Magnetic Particle inspections. The primary objective is to support prime contractors on shipboard projects through the delivery of detailed test reports and certifications for every heat or lot processed. To qualify for this engagement, contractors must maintain rigorous quality standards, including ISO/IEC 17025, ISO 10012, and ANSI/NCSL Z540.3 certifications. The opportunity falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacturing of Special Emphasis Heavy Hex NutsThis subcontract involves the manufacturing of high-criticality Heavy Hex Nuts for prime contractors supporting NAVSUP Weapon Systems Support shipboard projects. The scope of work requires the fabrication of nuts according to Leslie Controls drawings 38650N, 36938N, and 38980N, utilizing either ASTM-A194 Grade 2H or Grade 7 steel. Deliverables include the finished hardware accompanied by Certificates of Compliance. Strict quality and technical standards must be maintained, including thread inspection per FED-STD-H28 and packaging in accordance with MIL-STD-2073. The performing entity must maintain an ISO 9001 quality system and ensure compliance with ANSI/ASQ Z1.4. This opportunity is categorized under NAICS code 332722 for the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

MIL-STD-2073 Packaging and Marking ServicesThis subcontract involves providing specialized preservation, packaging, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The scope of work requires strict adherence to MIL-STD-2073 packaging standards and the application of Item Unique Identification markings using laser etchers or equivalent equipment to ensure the durability of Special Emphasis material. The selected provider is responsible for delivering all finished products fully packaged and marked for FOB Destination shipment. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense. Interested parties must submit their responses by November 2, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Production Lot Destructive Testing for Shipboard NutsThis subcontract involves performing destructive testing on production lots of shipboard nuts for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work focuses on material integrity validation for Special Emphasis Level I hardware, utilizing tensile, hardness, or shear testing in strict accordance with the Technical Data Package. The selected provider must maintain ISO/IEC 17025 laboratory accreditation to ensure testing standards are met. Key deliverables include the submission of formal test reports and the final certification regarding the acceptance or rejection of each production lot. This opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacture of Special Emphasis Plain Round Nuts (NIIN 013397780 & 013397781)This subcontract involves the manufacture of high-precision plain round nuts, specifically NIIN 013397780 and 013397781, for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is required to fabricate the components according to NAVSEA Drawing 6602371 and TDP Version 003, while adhering to FED-STD-H28 for thread inspection and MIL-DTL-24252 to ensure zero weld repairs. Eligible providers must possess precision machining equipment and hold either ISO-9001 or MIL-I-45208 certification. Final deliverables must include the finished nuts accompanied by comprehensive certification data and DD Form 1423. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Manufacture of Specialized Check Valves (VALVE, CHK SPCL42X46)This subcontract involves the manufacture of 10 specialized check valves, specifically model VALVE, CHK SPCL42X46 with NIIN 016665954, for prime contractors supporting Navsup Weapon Systems Support Mech. The fabrication process must strictly adhere to Cage Code IM994 and reference 2648038, utilizing precision machining equipment to ensure technical specifications are met. The contractor is responsible for full compliance with several military standards, including MIL-STD-130 REV N for marking and MIL-STD-2073 and MIL-STD-129 for packaging. Additionally, the project requires adherence to DFARS 252.204-7012 regulations. All units must be fully marked and inspected prior to delivery.

Industrial Valve Manufacturing

POSTED

DEADLINE

Destructive Testing for Naval Electrical ComponentsThis subcontract for the Department of Defense involves performing destructive First Article Testing for prime contractors on Navsup Weapon Systems Support Mech shipboard projects. The selected provider will execute government-mandated testing to failure using electrical overload, compression, and tension equipment to ensure structural and electrical integrity in accordance with TDP O04 specifications. The contractor must hold the necessary laboratory accreditation for military-grade destructive testing and is responsible for delivering a certified Test Report for government approval. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacture of MIL-SPEC Electrical Plug ConnectorsThis subcontract involves the manufacture of high-reliability electrical plug connectors for prime contractors supporting Navsup Weapon Systems Support Mech shipboard projects. The contractor is responsible for fabricating connectors with NIIN 010463755, adhering strictly to TDP Version O04 and MIL-DTL-24231 specifications. Production requires the use of precision machining and molding equipment, and the contractor must maintain Special Emphasis Level I capability. All finished products must comply with MIL-STD-2073 packaging standards and be delivered FOB Destination to the Portsmouth Naval Shipyard. This Department of Defense requirement falls under NAICS code 335931, with a response deadline set for October 30, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically applying markings according to MIL-STD-129, implementing Item Unique Identification per MIL-STD-130, and packaging items in accordance with MIL-STD-2073. All tasks must be completed using approved IUID marking equipment and MIL-SPEC materials, with finished products delivered as FOB Destination. The opportunity is categorized under NAICS code 488410 and was posted on October 16, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

Supply of Mercury-Free Electrical Components and Raw MaterialsThis subcontract involves the supply of mercury-free raw materials, connectors, and wiring to prime contractors supporting NAVSUP Weapon Systems Support projects for the Department of Defense. The scope focuses on providing electrical components that strictly adhere to toxicity and corrosion requirements specifically designed for the demanding environments of surface ships and submarines. A critical requirement of the contract is the provision of Material Certifications and Certificates of Conformance to verify the complete absence of mercury in all delivered goods. The opportunity is categorized under NAICS code 335931, with a response deadline set for November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Manufacture of CBL ACTR/LOCK PWR (NSN 6150-01-685-9963)This subcontract involves the manufacture of CBL ACTR/LOCK PWR assemblies, identified by NSN 6150-01-685-9963, for prime contractors supporting the Department of Defense Navsup Weapon Systems Support Mech. The selected vendor is responsible for fabricating cable assemblies according to drawing 8630048-1, ensuring all finished products are properly identified, packaged, and delivered. Strict compliance with technical and quality standards is required, including configuration control per MIL-STD-973 and marking per MIL-STD-129. Eligible vendors must hold ISO 9001 and PRO-020 certifications and guarantee the use of mercury-free materials. The response deadline for this opportunity is November 13, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS