Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Purchase of Lightning Data from Vendor for GOES-R GLM Validation Support

Active
80NSSC26938561QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA/NSSC is advancing a sole source procurement for the purchase of lightning data from Vaisala Inc. to support validation of the GOES-R Geostationary Lightning Mapper, under FAR 12.102(a), determining Vaisala Inc. as the sole provider capable of fulfilling this specific requirement. The acquisition will be conducted as a commercial item procurement under FAR Part 12, with performance located at NASA’s Marshall Space Flight Center and classified under NAICS code 334519. The request for capability and qualification submissions is open until 3:00 p.m. Central Standard Time on August 5, 2026, with written responses only accepted; oral communications are prohibited. The Government retains full discretion to determine whether competition is warranted based on submissions. This procurement falls under the 8(a) Sole Source program and is managed by the NASA Shared Services Center, with McKenzie Hanson as the primary point of contact and the NASA FAR Supplement Clause 1852.215-84, Ombudsman, applicable for procedural guidance.

General Info

NASA sole-source buys lightning data from Vaisala for GOES-R validation under FAR 12, 8(a) program, deadline August 5, 2026.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

MS, USA

Set-Aside

8A

Documents

(1)

SATPC0041856+Tab+04+4+SOW.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

Posted

special-notice

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
Contacts2 people available
OfficeSTENNIS SPACE CENTER, MS, 39529, USA
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressSTENNIS SPACE CENTER, MS, 39529, USA
Contacts
McKenzie Hanson

Full Description

Show more

Synopsis:



NASA/NSSC has a requirement for Purchase of Lightning Data from Vendor for GOES-R GLM Validation Support. 


NASA/NSSC intends to issue a sole source contract to   VAISALA INC.  under the authority of FAR 12.102(a). It has been determined that   VAISALA INC.  is the sole provider of Purchase of Lightning Data from Vendor for GOES-R GLM Validation Support


NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC).


The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial



The NAICS Code for this procurement is 334519.



Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 8/5/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.



Oral communications are not acceptable in response to this notice.



NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf .



Primary Point of Contact:


McKenzie Hanson


Procurement Specialist


McKenzie.M.Hanson@nasa.gov






Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
SENSING ELEMENT, FIRE DETECTOR SYSTEM
Solicitation # SPE4A7-26-R-0699
The contract pertains to the procurement of 40 units of a sensing element for a fire detector system, identified by NSN 6340-01-317-1209 and part number 5749928-003, manufactured by MEGGITT SAFETY SYSTEMS INC with CAGE code 25693. This is a source-controlled commercial item requiring strict adherence to limited rights data, and only vendors with existing access to the approved technical data or demonstrable traceability to the authorized source may submit offers. Source approval is mandatory for all other offerors and must be submitted as part of the technical data package to DSCR. The item is designated as a critical application component with zero tolerance for non-conformances under sampling protocols specified by MIL-STD-1916 or comparable zero-based plans, with verification levels assigned per critical, major, and minor attributes. Inspection and acceptance occur at origin, and delivery is due within 537 days after order date under a firm fixed price with no quantity variance allowed. Packaging must comply with MIL-PRF-23199 and MIL-STD-2073-1E, including specific preservation methods and marking requirements per MIL-STD-129 without special codes. Mercury and mercury-containing compounds are strictly prohibited in all aspects of the item, its preservation, packaging, or labeling, except for exempted functional uses in batteries, instruments, or sensors as defined by NAVSEA. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Item unique identification is not required per customer request and DFARS 252.211-7003(c)(1)(i). All quality, technical, and packaging requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions in effect on the solicitation issue date controlling. The contract is issued under the Department of Defense, with Renee Griffin as the primary point of contact, and all logistical details follow DLAD procedural notes for transportation and shipment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334519
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M0-26-T-007S
The contract is for the procurement of one starter motor identified by NSN 6110014537193 under solicitation SPE7M0-26-T-007S, issued by the Department of Defense’s Maritime Supply Chain ESOC Buys. The item must be delivered within five days to the destination address aboard the USS BATAAN LHD 5 at FPO AE 09554, with FOB destination terms and no tolerance for quantity variance. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation, wrapping, container, and palletization codes, while marking follows MIL-STD-129 with no special marking required. Shipment must be by the fastest traceable means via vessel, explicitly prohibiting parcel post, and vendors must use the VSM system for logistics coordination. Inspection and acceptance occur at the destination under FAR 52.246-2, with quality control governed by MIL-STD-1916 or comparable zero-based sampling plans requiring zero non-conformances unless otherwise specified; unspecified attributes are considered major with verification levels or AQLs assigned as VII, IV, and II. The contractor must adhere to DLA’s Master List of Technical and Quality Requirements referenced online and is prohibited from intentionally adding mercury or its compounds to the hardware, except for functional uses in batteries, sensors, or naval-specified equipment, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates multiple FAR and DFARS clauses, including requirements for System for Award Management (SAM) registration, combating trafficking in persons, employment eligibility verification, sustainable products, hazardous materials identification, safeguarding contractor information systems, and compliance with the Buy American Act and Berry Amendment. All payment and receiving reports must be processed through the Wide Area Workflow (WAWF) system, requiring SAM registration and WAWF access, with routing data to be confirmed upon award. The solicitation is not a small business set-aside, and offerors must maintain accurate size and socioeconomic representations in SAM. Technical data is not provided by DLA, and the contractor is responsible for ensuring compliance with all applicable standards, including cybersecurity requirements under NIST SP 800-171 and FAR 52.240-93. Quotes must be submitted via DIBBS, with non-compliant bids submitted as “No Bid” if late
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, INDICATING
Solicitation # SPE4A5-26-T-307P
The contract is for the procurement of eight capillary tube indicating thermometers identified by NSN 6685-01-239-5609 and part number 45-T8478K-52E000-0250-20/240 from Ashcroft Inc., designated as a commercial item under FAR definitions. Delivery is required FOB origin with a 169-day delivery schedule after order placement, and the items must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The item is classified as a critical application item, and inspection and acceptance occur at the destination point. Packaging must adhere to MIL-STD-2073-1E with preservation method code 10, using no hazardous materials such as mercury or mercury compounds, as explicitly prohibited under IP056. Marking must conform to MIL-STD-129 with the special designation "Delicate instrument" and physical identification requirements per RQ017, including barcoding for DoD shipments. Sampling for quality assurance utilizes MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances in the sample unless specified otherwise. The contract incorporates technical and quality requirements from the DLA Master List and references multiple DFARS and FAR clauses, including those governing hazardous material identification, safety data sheets, electronic invoicing via WAWF, and safeguarding of covered contractor information systems. The item is not subject to Item Unique Identification, and all packaging and labeling must comply with DLA-specific standards including RP001. Contracting is managed under a fixed-price structure without stated unit or total pricing, with offerors required to submit UEI and CAGE codes and complete representations on size status, socioeconomic designation, and compliance with prohibitions on covered defense telecommunications equipment. Proposals must be submitted electronically through DIBBS by July 31, 2026, and the contract includes clauses addressing accelerated payments to small business subcontractors, combating human trafficking, employment eligibility verification, and sustainable products. The procurement is not set aside and falls under NAICS 334519.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
Federal
GENERATOR,TACHOMETER/NSN 6680-00-432-5477
Solicitation # SPE4A626Q1037
The Department of Defense, through DLA Aviation, is seeking information to identify potential manufacturers capable of producing the generator tachometer with National Stock Number 6680-00-432-5477. This request is strictly informational and does not constitute a solicitation, request for proposal, or commitment to award a contract. Respondents are asked to provide the names of manufacturers able to produce the item, their physical locations in city and state or country, and any available points of contact, with all submissions directed to Karen Randolph at Karen.Randolph@dla.mil by the deadline of June 22, 2026. The notice identifies two approved sources for the part—Haydon Kerk Motion Solutions (CAGE 02005) and Ametek Technical & Industrial (CAGE 14404), both using part number 08TG873-1—as reference points for sourcing efforts. The procurement falls under the 8(a) Sole Source set-aside program with a NAICS code of 334519, indicating it is targeted toward small disadvantaged businesses, though no formal award is guaranteed or currently funded. The posting is issued under solicitation number SPE4A626Q1037, administered from Richmond, Virginia, with additional contact points provided through Kee-sha Eskridge. No pricing, delivery terms, evaluation criteria, or contractual obligations are associated with this notice, and responses are voluntary with no reimbursement for preparation costs.
DLA Aviation

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
Federal
USAFA Mach 6 Ludwieg Tube (M6LT) Force Balance
Solicitation # FA700026Q0081
This solicitation, FA700026Q0081, seeks a firm-fixed-price purchase order for a six-component force balance designed for the Mach 6 Ludwig Tube facility at the U.S. Air Force Academy’s Department of Aeronautics, with all requirements detailed in Attachment 1. The acquisition is fully reserved for small businesses under a total small business set-aside, with eligible contractors required to self-certify their size status in SAM.gov using NAICS code 334519 and meet all FAR and DFARS representations, including active registration and compliance with security prohibitions. Offers must be submitted electronically by 6 August 2026 at 2:00 p.m. MDT to the designated point of contact and include the completed SF1449 form with valid pricing valid for at least 60 days, technical capability documentation, authorized reseller certification if applicable, proof of SAM.gov registration with all required certifications, and the completed Buy American Certificate per Attachment 2. The Government will not award until funds are available and reserves the right to cancel the solicitation without reimbursement for offeror costs. Evaluation follows a phased approach prioritizing price but requiring technical acceptability and best value: quotes are first ranked by lowest price, with only the three lowest-priced submissions undergo technical and past performance review. Technical capability is assessed on an acceptable or unacceptable basis against Attachment 1, with mandatory compliance with security and supply chain requirements under FAR 52.240-91, and past performance is evaluated using Supplier Performance Risk System (SPRS) data. Award will be made to the first quote that is technically acceptable and represents the best value; if none of the top three meet criteria, subsequent lowest-priced quotes are evaluated in order until an award decision is reached. The product must comply with Buy American requirements, with domestic origin determined by manufacturing location and certified via Attachment 2. All delivered items must be permanently marked with a machine-readable 2D Data Matrix symbol per MIL-STD-130, containing unique item identifiers and encoded according to ISO/IEC 16022 and ISO/IEC 15418 standards, with labeling on shipments conforming to MIL-STD-129. Delivery is FOB destination to the specified USAFA address, and invoicing must be processed exclusively through Wide Area WorkFlow using approved document types. The force balance must be delivered no later than 31 August 2027,
FA7000 10 Cons Lgc

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
SLED
Traffic Lasers
Solicitation # 2026-Q-PD-041-MR
The City of Cape Coral is requesting proposals for the procurement of advanced Traffic Lasers designed to precisely target individual vehicles in heavy traffic conditions, enabling law enforcement to accurately identify speeding violators and strengthen the reliability of speed enforcement operations. These devices are critical to the city’s broader traffic safety strategy, aiming to deter dangerous driving behaviors, reduce collision rates, and improve the overall safety of roads for motorists, pedestrians, and cyclists through data-driven, targeted interventions. The solicitation requires vendors to deliver fully functional systems along with comprehensive support services, including calibration, tuning, installation, ongoing technical assistance, and a robust warranty to ensure long-term operational reliability. All responses must be submitted by August 12, 2026, at 6:00 PM, under solicitation number 2026-Q-PD-041-MR, with inquiries directed to Tammy Gair, Business Manager, or Milagros Rosario, Procurement Specialist, at the provided contact details. The contract is being issued by the Cape Coral Police Department under the State of Florida, with performance expected to occur locally within the city limits. Vendors are expected to demonstrate technical capability, proven device performance in high-density environments, and the ability to meet all service and support obligations to maintain system accuracy and compliance with enforcement standards.
Police Department

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
Hazardous Material Test Set Supply (Mercury-Containing Device)The contract calls for the manufacture and delivery of eight units of NSN 6625015338244, a TEST SET, CONTROL, which contains mercury and is classified as a hazardous material. Each unit must be engineered with a shock-proof design and fully compliant with containment standards to prevent leakage or exposure during handling, transport, and operational use. The requirement is non-negotiable and centers on ensuring the safety and integrity of the device throughout its lifecycle under physically demanding conditions. The item falls under NAICS code 334519, indicating it is part of the instrumentation and laboratory equipment manufacturing sector, and is being procured as a subcontract under the Department of Defense's Maritime Supply Chain. The solicitation is posted with a response deadline of August 10, 2026, and performance is to be completed at a specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. There is no set-aside designation, meaning the contract is open to all qualified bidders regardless of business size or status. The entity issuing the request is the Department of Defense, and the procurement is managed through the DLA BSM platform. All offers must meet strict hazardous materials regulatory standards, and failure to comply with containment or shock resistance specifications will result in immediate disqualification. The contract value and payment terms are not disclosed, but adherence to design and safety requirements is paramount for award consideration.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334519
New
DIBBS
Supply of Rotating Counters (NSN: 6680008522733)The contract calls for the supply and delivery of ten mechanical rotating counters identified by NSN 6680008522733, adhering strictly to all applicable military packaging, labeling, and identification requirements. These items are destined for delivery to the Defense Logistics Agency facility at New Cumberland, Pennsylvania, with the full zip code 17070-5002 specified as the place of performance. The procurement is structured as a subcontract under the NAICS code 334519, which pertains to other instruments and related products manufacturing, and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. All offerings must meet defense standards for quality, traceability, and documentation to ensure seamless integration into military logistics systems. The solicitation was posted on July 30, 2026, with a firm response deadline of August 7, 2026. Contractors are expected to submit proposals through the DIBBS platform using the referenced solicitation link, ensuring full compliance with federal acquisition guidelines. While no specific set-aside classification or point of contact details are provided, the focus remains on timely, accurate fulfillment of the ten-unit requirement under military-grade specifications. Failure to adhere to packaging or labeling protocols may result in rejection, making strict conformity a critical factor in bid evaluation and acceptance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 332813
New
Federal
Mechanical Testing Specimen FabricationThe contract requires the fabrication and supply of specialized metallurgical test specimens including witness bars, tensile coupons, and hot cycle fatigue coupons, all designed to meet Marshall Space Flight Center guidance and integrated directly into laser powder bed fusion build plates for material qualification purposes. These specimens must be manufactured with precise dimensional and metallurgical controls to ensure accurate mechanical performance data under simulated operational conditions, supporting NASA’s mission to validate new materials and additive manufacturing processes. The work is classified under NAICS code 332813 and is structured as a subcontract, with a strict submission deadline of August 4, 2026, emphasizing the time-sensitive nature of the material qualification effort. All delivered specimens must be traceable, properly documented, and capable of being tested under standardized conditions to provide reliable data for certification purposes. The project is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, indicating involvement in a high-stakes aerospace development initiative. While no specific location for performance is listed, the requirement implies close coordination with NASA’s additive manufacturing and materials testing facilities. The solicitation is open to qualified subcontractors with demonstrated expertise in metallurgical specimen fabrication and integration within laser-based additive manufacturing systems.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 333314
New
Federal
Additive Manufacturing of Inconel 718 Turbine Components via SLM Solutions 280The contract requires the performance of laser powder bed fusion additive manufacturing using the SLM Solutions 280 machine to produce turbine blades and shaft assemblies from Inconel 718, a high-performance nickel-based superalloy specified for its strength and thermal resistance under extreme conditions. The manufacturing process must adhere strictly to NASA-MSFC drawing MC34120-003 and the associated manufacturing plan 34120-MFG-PLAN, ensuring dimensional accuracy, material integrity, and mechanical properties aligned with NASA’s mission-critical standards. A design of experiments (DOE) component is included to systematically optimize laser parameters such as power, scan speed, hatch spacing, and layer thickness to achieve defect-free, high-density parts with consistent microstructure and mechanical performance. All work must be completed in compliance with federal procurement standards and delivered by the response deadline of August 4, 2026. The solicitation is classified as a subcontract under NAICS code 333314, indicating it pertains to the manufacturing of industrial machinery, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. While no specific place of performance or point of contact is provided, the nature of the work implies the need for a qualified additive manufacturing facility with demonstrated capability in aerospace-grade metal AM, experience with Inconel 718, and familiarity with NASA-specific technical documentation and quality assurance protocols.
Optical Instrument and Lens Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details