Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on April 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PYROMETER, INDICATIN

Awarded
SPE4A5-26-T-093TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519
New
DIBBS
CONTROL MODULE
Solicitation # SPE7M1-27-T-0970
Solicitation SPE7M1-27-T-0970 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of two Control Modules, identified by NSN 6110-01-212-3256. The required delivery date is December 26, 2026, with delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This procurement is issued under the First Destination Transportation program, and while offers should be submitted based on FOB Origin, the final terms are FOB Destination Other. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to DLA packaging requirements RP001 and MIL-STD-2073-1E, with marking following MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. A critical safety restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as specified by NAVSEA. Alternate offerors must provide a complete data package including information for both approved and alternate parts for technical evaluation. Administrative requirements include the use of Wide Area Workflow for invoicing and payment. The solicitation incorporates several key regulatory clauses, including DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program. All quotes must be submitted via the DIBBS system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The contract is for the procurement of 13 indicating pyrometers with NSN 6685-01-133-9042 under solicitation SPE4A5-26-T-093T, with a delivery requirement of 171 days from award and a mandatory delivery point at the DLA San Joaquin warehouse in Tracy, California. All items must be packaged in strict compliance with MIL-STD-2073-1E, marked per MIL-STD-129 with no special marking requirements, and palletized per DLA packaging guidelines. The contract prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, except for specific functional applications in batteries, fluorescent lights, sensors, or specialized instruments as defined by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier. Quality assurance is governed by tailored higher-level requirements, with inspection sampling following MIL-STD-1916 or ASQ H1331 using zero acceptance criteria unless otherwise stated, and attributes must be verified at specified levels with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The product must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The unit of issue is each, priced at $13.00 per unit, with a total contract value of $169. The required shipping date is October 20, 2026, with an original delivery deadline of June 24, 2026, and the point of contact for inquiries is Jamie Bonda of the DLA.

General Info

Procure 13 pyrometers, $13 each, deliver by June 24, 2026, to DLA Tracy, comply with MIL-STD-2073-1E and 129, no mercury except exemptions.

Contract Value

$7,945.6

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Award Issued Date

Documents

1

SPE4A5-26-T-093T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Solicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA

Full Description

Show more
PYROMETER,INDICATIN
PYROMETER,INDICATING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ELECTRONIC DEVELOPMENT LABORATORIES, 27281 P/N NMP-06
SPE4A5-26-T-093T
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016482856 0001 EA 13.000
NSN/MATERIAL:6685011339042
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A5-26-T-093T
SECTION B
PR: 7016482856 PRLI: 0001 CONT’D
Need Ship Date:10/20/2026 Original Required Delivery Date:06/24/2026
SPE4A5-26-T-093T NSN/Part Number: 6685-01-133-9042 Quantity: 13 EA Purchase Request: 7016482856QTY: 13 Delivery: 171 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334512
New
DIBBS
THERMOMETER, INDICAT
Solicitation # SPE4A5-26-T-363Y
Solicitation SPE4A5-26-T-363Y is a procurement request by the Defense Logistics Agency Aviation for 23 units of indicating thermometers featuring capillary tubes and bulbs, identified by NSN 6685-01-376-11113. The contract specifies a need ship date of February 12, 2027, with an original required delivery date of March 3, 2027. Delivery is set as FOB Origin, with the final destination for both inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The procurement is categorized under NAICS code 334512 and incorporates specific quality and technical requirements, including the prohibition of mercury or mercury-containing compounds in preservation, packaging, and marking. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E for packaging data and MIL-STD-129 for marking, including a special marking code for delicate instruments. Quality assurance will be conducted via destination inspection using sampling methods aligned with MIL-STD-1916 or ASQ H1331. Key regulatory clauses include the Buy American Act via DFARS 252.225-7036 Alternate IV and cybersecurity requirements under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
BLOCK, NOZZLE
Solicitation # SPE4A5-26-T-440A
Solicitation SPE4A5-26-T-440A is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 15 nozzle blocks, identified by NSN 1650-01-052-8065 and part number A21271-1. The requirement is managed by the ASC Supplier Oper OEM Division under NAICS code 336413. The need ship date is March 16, 2027, with an original required delivery date of November 14, 2027. Delivery is specified as FOB Origin, with the final destination being the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, with specific requirements for bare item marking and the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Compliance requirements include a CMMC Level 2 self-assessment and adherence to the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation requires offerors to provide CAGE codes and represent their size status, with a non-manufacturer size standard of 500 employees for applicable set-asides.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS