Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

QPL Electrical Plug Connector Supplier (NSN 5935-01-108-3227)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 24 electrical plug connectors, identified by NSN 5935-01-108-3227, for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for manufacturing or sourcing connectors that strictly adhere to MS3476G(3) and MIL-DTL-26482J(2) specifications. All components must be sourced from QPL approved providers, and the supplier must certify that no mercury has been intentionally added to the products. The contract requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for all packaging and marking procedures. Final delivery of the units is to be made to DLA Distribution San Diego. The opportunity is categorized under NAICS code 335129, with a response deadline set for October 26, 2026.

General Info

Supply 24 electrical plug connectors to DLA San Diego by October 26, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

335129 - Other Lighting Equipment Manufacturing

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-27-T-0186.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR, PLUG, ELECTRI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical plug connectors for prime contractors delivering DLA supply contracts. Manufactures or sources connectors adhering to MS3476G(3) and MIL-DTL-26482J(2) specifications. Ensures QPL approved sourcing and certifies no intentional addition of mercury. Performs packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Delivers 24 units of NSN 5935-01-108-3227 to DLA Distribution San Diego.

Similar Contracts

Same NAICS industry code

Manufacturing of Special Purpose Electrical Cable Assemblies (NSN 6150-15-035-4137)This subcontract involves the manufacturing of two special purpose electrical cable assemblies under NSN 6150-15-035-4137 for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The selected contractor must utilize precision crimping and testing equipment to fabricate the assemblies, ensuring all items undergo physical identification and bare item marking in accordance with RQ017. Final products must be packaged following MIL-STD-2073-1E and MIL-STD-129 standards. The project is categorized under NAICS code 335129 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by October 22, 2026, to meet the requirements for these tested and packaged cable assemblies intended for prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Manufacture and Supply of Extension LightsThis subcontract involves the manufacture and supply of six completed extension light units for prime contractors working on DLA Troop Support projects. The units must be produced in accordance with MIL-PRF-44259F and drawing 5-4-6721, and each unit must include two light straps. Strict adherence to marking and packaging standards is required, specifically MIL-STD-130N for marking and RP001 for packaging. Quality control is governed by MIL-STD-105/AQS Z1.4 for sample lot sizing, with a requirement of zero non-conformance. The project is managed under the Department of Defense through the Albany Transportation Officer, with performance taking place in Albany. The solicitation period closes on October 26, 2026.

ALBANY TRANSPORTATION OFFICER

POSTED

about 16 hours ago

DEADLINE

LIGHT, EXTENSION

Solicitation # SPE8E7-27-T-0141

Solicitation SPE8E7-27-T-0141 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of six extension lights (NSN 6230-01-485-6375). The requirement specifies adherence to MIL-PRF-44259F and includes a specific exception requiring two light straps per drawing 5-4-6721, with no other straps permitted. Delivery is required within 258 days, with a need ship date of February 12, 2027, and a final required delivery date of March 23, 2027. The place of performance and delivery is the DLA Distribution Albany facility in Georgia, with FOB, inspection, and acceptance all set at the origin. The contract mandates first article testing and strict quality control, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment. Packaging must follow ASTM D3951 and MIL-STD-129, while military property marking must comply with MIL-STD-130N. Administrative processing, including payment requests and receiving reports, must be conducted through the Wide Area WorkFlow system. A price evaluation preference is available for certified HUBZone small business concerns.

ALBANY TRANSPORTATION OFFICER

POSTED

about 16 hours ago

DEADLINE

Manufacturing of Special Purpose Electrical Cable Assemblies (NSN 6150015518686)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture of five special purpose electrical cable assemblies. The fabrication must strictly adhere to NSN 6150015518686 and OEM part numbers EB-4022-4 or V45-0375. Key technical requirements include IUID marking in accordance with MIL-STD-130 and guaranteed mercury-free compliance per NAVSEA 500-003D. The opportunity is a total small business set-aside under NAICS code 335129. Due to the nature of the work, the contractor must be capable of handling covered defense information per DFARS 252.204-7012 and must complete a CMMC Level 2 self-assessment. All delivered assemblies must be fully completed and tested.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly ManufacturingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture of 12 special purpose electrical cable assemblies. The selected contractor is responsible for sourcing materials according to NSN 5995016260058 technical data, performing all necessary assembly, soldering, and termination, and conducting final electrical continuity testing. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The project is designated as a Total Small Business Set-Aside under NAICS code 335129, with performance taking place in New Cumberland. A critical requirement for this contract is the maintenance of NIST SP 800-171 cybersecurity compliance. Interested parties must respond by October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly Fabrication

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Electrical Receptacle Connectors (NSN 5935-01-444-6797)This subcontract involves the procurement of 28 electrical receptacle connectors, specifically NSN 5935-01-444-6797, to support DLA supply contracts. The Department of Defense, through the DLA Weapons Support Active Devices Division, requires that all components be sourced or manufactured in compliance with the Buy American Act and the Berry Amendment. The selected provider must adhere to strict packaging and marking standards per RP001 and MIL-STD-129, including hazardous material labeling according to 29 CFR 1910.1200 where applicable. All units are to be delivered to New Cumberland, Pennsylvania. The response deadline for this requirement is October 23, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Sensitive Switches (NSN 5930014149829)This subcontract involves the procurement of two sensitive switches for the DLA Weapons Support Electrical Devices Division under the Department of Defense. The supplier is responsible for sourcing or manufacturing hardware that meets NSN 5930014149829 specifications and maintains compatibility with L3 Technologies and Honeywell part numbers. Strict adherence to Critical Application designations and mercury-free requirements is mandatory to ensure operational safety and compliance. Logistical requirements dictate that all items must be packaged and marked according to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. The final delivery of the switches is designated as FOB Origin to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026, falling under NAICS code 335129.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Manufacturing of Power Cable Assemblies (NSN 6150016241162)This subcontract involves the manufacture and assembly of five electrical power cable assemblies under NSN 6150016241162 for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work includes cutting and stripping electrical conductors, terminating wires to connectors, and conducting essential continuity and insulation testing to ensure operational integrity. The contractor must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129, and maintain compliance with DFARS 252.204-7012. Performance will take place in Egg Harbor Township, New Jersey, with a response deadline set for October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Socket Head Cap Screw Supply (NSN 5305-12-384-3515)This subcontract involves the supply of specialized socket head cap screws (NSN 5305-12-384-3515) for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing screws that strictly adhere to ISO 4762 Revision 4 standards, with a mandatory requirement for compliance with the Buy American Act and the Berry Amendment. All products must undergo quality assurance testing according to MIL-STD-1916 or ASQ H1331, and the use of precision machining equipment is required, as additive manufacturing is explicitly prohibited. Deliverables consist of screws packaged in quantities of three per unit, following ASTM D3951 and MIL-STD-129 guidelines. The performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must respond by October 20, 2026, regarding this requirement categorized under NAICS code 335129.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Electrical Leads (NSN 6150-01-705-6419)This subcontract involves the manufacture of 11 inspected custom electrical leads for the DLA Weapons Support ASC Commodities Division under NAICS code 335129. The fabrication must strictly adhere to Technical Data Packages and specific drawings 19200 13105169, 19200 12579607, and 19207 12292178. Performance of the contract will take place in Tracy, California. The contractor must maintain ISO 9001:2015 quality systems and CMMC Level 2 certification. Due to export control requirements, the US/Canada Joint Certification Program is mandatory. Additionally, all materials used in production must comply with the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Special Purpose Electrical Cable AssembliesThis subcontract involves the fabrication of 18 special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the assembly of SCI Technology part number 5465208-003, which includes the integration of shielding and connectors. All units must undergo quality testing in accordance with MIL-STD-1916 or ASQ H1331 and be packaged following ASTM D3951 and MIL-STD-129 standards. The project is categorized under NAICS code 335129 and will be performed in Tracy, California. A critical compliance requirement for the contractor is a CMMC Level 2 self-assessment. The final deliverable consists of 18 completed and tested cable assemblies, with a response deadline set for October 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

304 CRES Annealed Wire Fabric SupplyThis subcontract involves the supply of specialized flattened tubular wire fabric for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The required material must be fabricated from 304 CRES annealed wire with a 0.008 inch diameter, featuring 7 courses per inch and a mesh crimp between 0.125 and 0.150 inches. A critical quality requirement is the strict prevention of mercury contact in accordance with program specifications. The order consists of 14 rolls, each measuring 30 inches by 50 yards, which must be packaged according to RP001 and MIL-STD-2073-1E standards. Performance for this contract is located in Tracy, California, under NAICS code 332618. Responses to this solicitation are due by October 26, 2026.

Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M2-27-T-0197

Solicitation SPE7M2-27-T-0197 is a fixed-price contract issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 14 units of wire fabric. The material is specified as 304 CRES annealed steel in a flattened tubular form with a wire diameter of 0.008 inches, 7 plus or minus 1/4 courses per inch with equal spacing, and a crimped mesh of 0.125 to 0.150 inches. The fabric must have a peak-to-peak depth of 5/16 inch and be supplied in rolls 30 inches wide by 50 linear yards. This is designated as a critical application item, and the procurement prohibits the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting chemicals. Delivery is required within 161 days after the order, with a need ship date of April 6, 2027, and a final required delivery date of June 5, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will occur. Packaging must comply with MIL-STD-2073-1E and RP001, with specific marking requirements following MIL-STD-129 and ASTM A700 for special packaging codes Z and ZZ. Payment will be processed electronically through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and strict cybersecurity requirements under DFARS 252.204-7012.

Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors under the DLA Weapons Support Nuclear Reactor Program. The scope of work involves the professional packaging, marking, and palletization of items using MIL-SPEC materials to ensure readiness for delivery to DLA Distribution DDSP New Cumberland. All activities must strictly adhere to established military standards, specifically MIL-STD-2073-1E Method 31 for packaging, MIL-STD-129 for marking, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026, for this Department of Defense requirement.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Raw Materials for Fuseholder FHL34W-12This subcontract involves the supply of raw metals and alloys specifically for the production of Fuseholder FHL34W-12 under the DLA Weapons Support Nuclear Reactor Program. The selected provider must deliver certified raw materials to the manufacturer that strictly adhere to the chemical and physical properties outlined in MIL-PRF-19207/23M(1) and MIL-PRF-19207G(2). Essential documentation requirements include the provision of process operation sheets and certified material test reports. The opportunity is designated as a total small business set-aside under NAICS code 331410 for the Department of Defense. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026.

Nonferrous Metal (except Aluminum) Smelting and Refining

POSTED

DEADLINE

Manufacture of Fuseholder, Extractor Post (FHL34W-12)This subcontract, designated as a Total Small Business Set-Aside, requires the manufacture of 1,065 Fuseholder, Extractor Post units for the DLA Weapons Support Nuclear Reactor Program. The fabrication process must strictly adhere to MIL-PRF-19207/23M(1), MIL-PRF-19207G(2), and TDP Rev A Gen 1 specifications. Additionally, the contractor must ensure there is no mercury contact in accordance with NAVSEA 5000-003D and maintain cybersecurity compliance per NIST SP 800-171. The project falls under NAICS code 335931 and involves delivering the finished units to DLA Distribution DDSP New Cumberland. Interested parties should note the response deadline of October 21, 2026, for this Department of Defense requirement.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supplier of White Electrical Insulation Tape (NSN 5970002848565)This subcontract involves the supply of white electrical insulation tape to support prime contractors for the DLA Weapons Support Nuclear Reactor Program. The required tape must adhere to NSN 5970002848565 and CID A-A-59770A specifications, featuring a nominal length of 2160 inches, a width of 0.750 inches, and a thickness of 0.0070 inches. All products must be marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001. The finished rolls are to be delivered FOB Origin to Dobbins AFB and the USNS Washington Chambers. This procurement falls under NAICS code 325412 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

HazMat Packaging and Specialized FreightThis subcontract involves providing specialized packaging and shipping services for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work focuses on the packaging and marking of units in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with a specific requirement to deliver packaged transformers to DLA Distribution San Diego. A critical component of the contract is the management of hazardous materials, requiring adherence to DFARS 252.223-7001 and 29 CFR 1910.1200 labeling standards. Consequently, the performing entity must hold valid HazMat and DOT certifications. The project falls under NAICS code 484220 and is managed by the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Transformer Component SupplyThis subcontract for the Transformer Component Supply project supports the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The scope of work involves providing raw materials and precision-engineered components, specifically electrical grade steel for cores, high-conductivity copper and aluminum for windings, and specialized insulating resins that adhere to Drawing 80020 620783. The contractor is responsible for delivering certified sub-components to prime contractors. Performance for this contract will take place in San Diego, California. To be eligible, providers must ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on October 13, 2026, with a response deadline of October 26, 2026, falling under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Power Transformer Fabrication and AssemblyThis subcontract involves the manufacture and assembly of two power transformers under National Stock Number 5950-01-057-5613 for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the fabrication of cores, windings, and housings in strict accordance with Basic Drawing 80020 620783 Revision H, with a specific requirement that all construction be mercury-free. Performance of the contract will take place in San Diego, California. To qualify for this project, contractors must hold CMMC Level 2 and JCP certifications to ensure the secure handling of export-controlled technical data. The opportunity was posted on October 13, 2026, with a response deadline of October 26, 2026. The project falls under NAICS code 335311 for power and distribution transformer manufacturing.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Protected Cargo HandlingThis subcontract, set aside for Women-Owned Small Businesses, involves providing specialized MIL-SPEC packaging and marking services for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for preparing 12 units for FOB Origin shipment in San Diego, ensuring all items are packed according to MIL-STD-2073-1E and marked per MIL-STD-129. To maintain security for protected cargo, Special Marking Code 40 must be used to omit sensitive nomenclature, and the process requires the use of Preservative Material 49 and Wrap Material GB. The opportunity was posted on October 13, 2026, with a response deadline of October 26, 2026. Falling under NAICS code 488410, the project is managed by the Department of Defense. Interested parties must adhere to the strict military standards and security protocols outlined to ensure the safe and compliant transport of nuclear reactor program components.

Motor Vehicle Towing

POSTED

DEADLINE

Precision Machining and Fabrication of Deflector Panel Strut AssembliesThis subcontract involves the precision machining and fabrication of 12 mercury-free Deflector Panel Strut Assemblies for the DLA Weapons Support Nuclear Reactor Program. The selected contractor will perform assembly and machining according to NSN 1710-00-418-5116 technical drawings, utilizing non-additive manufacturing processes. Work is to be performed in San Diego, California. The opportunity is set aside for Women-Owned Small Businesses and requires specific quality and security credentials, including SAE AS9003 or ISO 9001 certification and JCP certification for handling export-controlled data. Responses are due by October 26, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Industrial Safety Spectacles (NSN 4240005164728)This subcontract involves the supply of 1,771 pairs of industrial safety spectacles for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The required spectacles must feature translucent plastic frames and temples with clear side shields, ensuring full compliance with ANSI/ISEA Z87.1 Revision D standards. The contractor is responsible for adhering to strict packaging and marking guidelines per MIL-STD-129, RP001, and MIL-STD-2073-1E, while maintaining a zero-nonconformance sampling plan. Performance for this contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026.

Ophthalmic Goods Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS